Trending March 2024 # “Windows Could Not Complete The Installation” Windows 11/10 # Suggested April 2024 # Top 11 Popular

You are reading the article “Windows Could Not Complete The Installation” Windows 11/10 updated in March 2024 on the website Bellydancehcm.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested April 2024 “Windows Could Not Complete The Installation” Windows 11/10

If you’re attempting to upgrade your Windows operating system to the latest version, such as Windows 10 or 11, you may encounter the error message “Windows could not complete the installation. To install Windows on this computer, restart the installation.” This error can be frustrating and confusing, leaving you with no clear instructions on what to do next.

However, there are several solutions to this problem that have been tested and proven to work. In this article, we’ll share with you the best methods to fix the “Windows could not complete the installation” error on Windows 10 and 11.

The “Windows could not complete the installation” error message typically appears when there is an issue with the Windows installation process. This could be due to a variety of reasons, such as corrupted installation files, hardware issues, outdated drivers, or insufficient system resources.

In some cases, the error message may also appear if there are conflicts with existing software or antivirus programs on the computer. These conflicts can prevent the installation process from completing successfully.

It’s important to note that this error message can occur during any stage of the Windows installation process, including during upgrades, clean installs, or system restores.

If you’re encountering the “Windows could not complete the installation” error message during the installation or upgrade of Windows 10 or 11, one of the most effective ways to fix it is to force your system to boot into the Automatic Repair screen.

To force your Windows 10 or 11 to boot into Automatic Repair, follow these steps:

If you’re on the “Windows could not complete the installation” error screen, turn off your computer by long-holding and pressing your computer’s power button until everything turns off.

Turn on your PC again. As soon as it starts loading your Windows, turn it off again. Repeat this step three times.

Select “Continue.”

The Windows 10 or 11 installation should resume now.

This method works because it clears any temporary files or corrupted data that may be causing the installation to fail.

The OOBE MSOOBE method is a classic solution that has been used to fix the “Windows could not complete the installation” error on Windows 7 and 8 installations. Some users have reported that this method also works for Windows 10 and 11 installations.

OOBE stands for “Out-of-Box Experience,” which is the wizard that runs when you first set up your computer. MSOOBE, on the other hand, stands for “Microsoft Out-of-Box Experience.” This method essentially forces your computer to go through the OOBE again, creating a new account and user profile.

To use the OOBE MSOOBE method to fix the “Windows could not complete the installation” error, follow these steps:

On the error screen, hold “Shift” and press “F10.” This will bring up the command prompt.

In the command prompt, type the following command: cd %windir%/system32/oobe/

Press “Enter.”

Then, continue by typing the following command: msoobe

Press “Enter.”

In the next window that appears, create an account with a username and password in the wizard.

Restart your computer and see if this fixes the problem.

This method works by essentially creating a new user profile on your computer, which may resolve any issues that were preventing the installation from completing successfully.

If all else fails, the installation disc or USB that you’re using to install Windows 10 or 11 may be corrupted or damaged. In this case, you’ll need to replace your installation media with a new, working copy.

It’s important to note that if you’re experiencing this error message frequently or with different installation attempts, there may be an underlying issue with your computer that needs to be addressed. In this case, it’s recommended to seek professional assistance to diagnose and repair the issue.

You're reading “Windows Could Not Complete The Installation” Windows 11/10

Fix The Application Is Not Responding Error On Windows 11/10

The application is not responding error is one of the many issues users encounter when using Windows computers. This issue is quite annoying as it just shuts down programs without warning, which may, as a result, cause you to lose unsaved work and other things like that. In addition, numerous people have been spotted reporting this problem on other platforms, including the Microsoft forum and others.

Most often, people choose to close the software by hitting the End Process option on the error message. However, this never fixes the problem and only causes your computer to hang. So, you should be aware of the numerous factors that could be causing this problem on your computer. Hence, this post will offer seven solutions to the application is not responding error in Windows 11/10, as well as some additional information.

Reasons for “The application is not responding” error

There are just a few potential causes of this error message if it appears on your computer while you are using a software or a built-in feature like the Task Manager. Typically, if your computer doesn’t have enough memory to run a program, the application will crash and that could be the cause of the application not responding issue on your Windows computer.

Some users might not have updated their Windows recently, which means the computer may have bugs or other problems. This could be the cause of some programs crashing on these types of computers. Additionally, malware is widely known for causing issues like these. After correcting the problem with one of the fixes we’ll cover in the following section of this article, you must take note of these causes to keep it from happening again on your PC. The causes are listed below:

Malware issues

Insufficient memory

Outdated drivers

Bug in the program

Fix The application is not responding error in Windows 11/10

We’ve gathered a number of solutions to resolve the application is not responding error in Windows 11/10 here:

Restart your computer

Update Windows as well as the program

Run Antivirus

Run Memory Check

Run System Maintenance Troubleshooter

Check-in Clean Boot State

Increase RAM

Now, let’s cover how you can perform each of these workarounds effectively.

1] Restart your computer

If you happen to have been using your computer for a long hour, restarting the computer will help clear the memory as well as restart its services. Hence, your computer will operate more effectively as a result, and the problem you were having will be resolved. If this approach doesn’t work, though, try the next.

Read: Task Manager is not responding

2] Update Windows as well as the program

Windows 11

Press Windows + I keys to open Settings on your computer.

If there are any available Optional or Driver updates, install them.

Windows 10

Go to Settings on your computer.

Select Updates & Security.

Then check available Optional or Driver updates and install them if there are any.

If this issue is due to a pending Windows Update, this approach will help fix it.

You should also manually check if any updates are available for the program that is creating issues, and install them if they are available.

3] Run Antivirus

Having malware on your computer will have a negative impact on its performance in every regard you could imagine. So, getting this error message may also be as a result of malware. You should therefore run a malware scan using Windows Defender or any other antivirus software you may have installed on your computer.

4] Run Memory Check

Another thing you can do to resolve the “Application is not responding” error is to run a memory check. This approach will help out if your computer is having a memory leak or any other memory issue to know whether that’s the reason for the glitch you are facing or not. To run a memory check, do this:

Press Windows + R to open Run Command Box.

Type chúng tôi and select OK.

On the resulting window, pick any of the two options depending on which one is convenient for you.

If you choose to restart now, then wait for the test to run.

5] Troubleshoot in Clean Boot State

You can also perform a clean boot on your computer to determine what’s causing the problem. If the issue does persist after the clean boot troubleshooting, it indicates that a third-party process is the root of the problem, and you may need to run a troubleshooter on your computer. Furthermore, troubleshooting in a clean boot state involves a number of steps, all of which entail restarting your computer. In essence, the activities consist of turning off a few services and checking to see if the problem persists. This is only being done to identify and fix the glitch’s underlying cause.

6] Run System Maintenance troubleshooter

After trying other solutions, the issue is still happening; you can also try running the System Maintenance troubleshooter. To do that, follow these steps;

Press Windows + I to open Windows settings.

Afterward, restart your computer and check if the issue has been resolved.

7] Increase RAM

You may need to increase the RAM. This is sure to help you.

You could also optimize the computer for performance and Clean up Disk Space.

Similar: Programs not responding in Windows

What do I do if a program is completely unresponsive in Windows 11/10?

Read: How to kill a Not Responding process in Windows

Why is my application saying Not responding in Windows 11/10?

If your program stops responding on a Windows computer, most of the time, it can be traced to insufficient RAM. This means the program isn’t getting the amount of memory for it to run efficiently. More so, it can be due to a bug or malware on your computer.

Full Fix: Windows 10/11 Photo Enhancer Not Working

Full fix: Windows 10/11 Photo Enhancer not working

2

Share

X

If you’re dealing with a severe case of enhance your photo not working, your creative flow will get disrupted for sure.

The way we see it, with Windows photos enhance not working, you get more than a disturbance in the force – it is a good opportunity to consider more modern photo editing alternatives.

If you’re not so eager to ditch the built-in tools, you can always run the built-in troubleshooter.

A Windows 10 photos auto enhance missing case can also be an indicator that you’re lacking some important updates and that’s always a path worth exploring.

Windows (Microsoft) Photos would be a great photo-editing app if there weren’t so many bugs.

There are many things going for it, but it seems that, when it comes to stability, this app falls short for many users.

But, it seems that this nifty retouching tool stopped working recently.

If you’re dealing with a severe case of enhance your photo not working, worry not as we prepared a list of available solutions.

At least one of those should help you address the matter at hand, so don’t hesitate to try our fixes to solve the Windows photos enhance not working.

How can I fix Enhance your photo mode issues in Windows 10? 1. Download Adobe Photoshop

If your Photo Enhance is not working in Windows 10, the easiest solution is to use an alternative. The best photo enhancement and editing tool available on the market right now is Adobe Photoshop.

This software tool has a wide range of features and options.

It can be downloaded and installed in just a couple of steps, without the hassle of a complex process with confusing steps.

Photoshop is the first choice of beginners and professionals, mainly because of its plethora of editing tools and ease of use.

A large number of brushes, filters, and photo effects add to the complete experience that Photoshop offers.

Besides that, the customizable workspace with lots of easy-to-use options is another big plus.

Frame tools, slicing tools, magic wand, symmetry mode, white balance, color gamma, and color correction are just some of the many features in Photoshop that can help you enhance your photos.

Adobe Photoshop

If the Photos app is failing, the most cherished photo editing software will definitely enhance your artwork!

Free trialVisit website

2. Run the built-in troubleshooter

Here’s how to run the dedicated troubleshooter and try fixing the Photos app and the Enhance your photo mode:

The first troubleshooting step is the built-in part of Windows 10. Since the Photos app is an integral part of the Windows 10 workflow, there’s the dedicated troubleshooter which deals with app issues.

The idea was for UWP apps to take over, but even the built-in ones, like Photos and Mail & Calendar, fall short. This is where the Store Apps troubleshooter comes into play.

3. Update Windows 10

Here’s the whole route:

The number of times Microsoft changed the Photos app since its inception on Windows 8 can barely count.

Expert tip:

Now you’ll need to apply this to every individual photo. And even that, obviously, won’t function as initially intended. If this was a minor problem, Microsoft might’ve put it under the rug.

However, since there were (and still are) lots of complaints, they had to do something. And, seemingly, they did.

That’s why we encourage you to check for the latest updates. In addition, make your way to Microsoft Store and check for updates there, as well.

4. Reset the app

Here’s how to reset the Photos app in Windows 10:

As you’re probably aware, one can’t uninstall the Photos app. It’s a successor to Windows Photo Viewer and the main competition to Google Photos.

You can, on the other hand, reset the app to factory values. This won’t meddle with your photos, so don’t worry about it.

It’ll just clear all pilled-up cache and, basically, refresh everything as it’s the first time you’re starting the app.

5. Reinstall Windows Photos

Follow these steps to reinstall Windows Photos in Windows 10:

Yes, we said you can’t remove Windows Photos. But that doesn’t exclusively mean the app can’t be reinstalled. Of course, this requires a more complex approach than the previously suggested solution.

In order to reinstall the Windows Photos app (or any built-in app, for that matter), you’ll need to use PowerShell as shown above.

6. Try sticking to local photos only

Here’s how to disable OneDrive for Windows Photos:

You can, without downloading, access all photos stored in OneDrive. However, there are some reports that this causes the slowdowns and additional issues with Windows Photos.

Especially if you’ve changed the default OneDrive locale on your PC or the photos are only online-stored.

Because of that, we recommend unlinking the OneDrive and Windows Photos (if this link isn’t a dire need). You could still access all photos on your local storage.

Also, leave there any other questions or suggestions that you may have.

Was this page helpful?

x

Start a conversation

Fix Insufficient System Resources Exist To Complete The Api Error On Windows 11/10

In this article, we will see some solutions to fix the Insufficient system resources exist to complete the API error on a Windows 11/10 computer. This error code is associated with the hardware, either the laptop’s touchpad or a USB device. The users who experienced this error have stated that their laptop’s touchpad and some of the USB devices connected to their systems have stopped working suddenly. On viewing the Properties of the device driver in the Device Manager, they saw the following error message:

This device cannot start. (Code 10)

Insufficient system resources exist to complete the API.

The most common cause of this error is corrupted or outdated device drivers. Apart from this, there are some other causes of this error, like insufficient or low disk space. In this article, we have listed some solutions that may help you get rid of this problem.

Insufficient system resources exist to complete the API in Windows 11/10

As explained above, low memory or disk space can also trigger this error. Therefore, first, close all the running programs to free up some RAM. If this does not fix the problem, try to free up some disk space. You can move your data from your computer’s hard drive to an external hard disk or you can upload your data to free cloud storage services, like Google Drive, OneDrive, etc.

If you see this error message in the Device Manager, you can try the solutions explained below to fix the problem.

Run the Hardware and Devices Troubleshooter

Update your device driver

Install the driver in Compatibility mode

Use another USB port

Troubleshoot in a Clean Boot state

Perform a System Restore

Reset your PC

Let’s see all these fixes in detail.

1] Run the Hardware and Devices Troubleshooter

You can run the Hardware and Devices Troubleshooter and see if it fixes the problem. In the earlier version of Windows 10, the Hardware and Devices Troubleshooter was available in the Settings app. But in the later versions, Microsoft has removed it from the Settings. But you can still run this troubleshooter on your Windows 11/10 device by executing the following command in the Command Prompt.

msdt.exe -id DeviceDiagnostic 2] Update your device driver

As explained earlier in this article, the most common cause of the problem is the corrupted or outdated device driver. Therefore, we suggest you update your device driver from the Device Manager. The steps for this are explained below:

Select the driver of the device you are experiencing the issue with.

Now, select the Search automatically for drivers option.

3] Install the driver in Compatibility mode

If updating the device driver did not fix your problem, you can try installing the driver in the Compatibility mode. First, uninstall the driver from your Device Manager. After uninstalling the driver, open the location on which you have downloaded the driver from the manufacturer’s website. Now, follow the steps below:

Enable the “Run this program in compatibility mode for” checkbox.

Select the older version of Windows from the drop-down list.

4] Use another USB port

If you are experiencing an issue with your USB device, connect it to another USB port and check if the problem persists. For some users, connecting the USB device to USB 3.0 instead of the USB 2.0 port fixed the problem. If you have already connected your device to the USB 3.0 port, disconnect it from that port and connect it to the USB 2.0 port.

5] Troubleshoot in a Clean Boot state

The problem might be occurring due to some conflicting programs installed on your device. You can check this by troubleshooting your system in a Clean Boot state. If you find a problematic program on your system, uninstall it and then check if the problem disappears.

6] Perform a System Restore

The System Restore has fixed the problem of some users. It is a tool developed by Microsoft that helps users protect and repair their computers. When you run this tool, it creates a snapshot of the Windows System Image files and Windows Registry and saves them as a restore point. If any problem occurs on a Windows computer, the System Restore Point helps users to take their systems to the previous working state without reinstalling the Windows operating system.

If you have created a system restore point, running the System Restore can help you fix this problem.

7] Reset your PC

If the System Restore tool did not fix the issue, you can reset your PC to fix this problem. Before resetting your PC, backup all your data on a hard drive.

What is Code 10 in Device Manager?

The Device Manager shows Code 10 when Windows cannot start hardware or a USB device connected to the computer. Code 10 is among the Device Manager error codes. You can experience this error with your laptop’s touchpad or any other USB device you connect to your computer, like a speaker, keyboard, mouse, etc. Due to this error, the hardware device does not work. The main cause of this problem is outdated or corrupted device drivers. However, some other causes can also trigger this error.

Drivers are the software that develop a connecting link between the hardware and the operating system. If drivers get corrupted, the communication link between an operating system and the hardware device breaks due to which the hardware device does not work.

Why do we have insufficient system resources? How do I fix Insufficient system resources exist to complete the API?

You may see this error message in the Device Manager when your hardware or external USB device connected to your computer stops working. The main cause of the error is the corruption in device drivers. Hence, to fix this problem, you have to update or reinstall your device drivers.

Hope this helps.

Read next: Insufficient system resources exist to complete the requested service.

How To Prevent Unwanted Driver Installation In Windows 10

One of the issues that is quite annoying with Windows 10 is how it behaves with the updates, especially with the driver updates. Personally, I haven’t faced any significant issues with the regular Windows updates, but I did face the driver problem when Windows 10 chose to update the graphics card driver of my old laptop. That driver update messed up my poor old laptop, and it took me a good two hours to fix it. If you think Windows 10 is downloading an incompatible driver on your machine, here is how you can temporarily block Windows 10 from installing that specific driver.

Stop Windows 10 from Installing a Driver

Before you can stop Windows from installing a driver, you first need to uninstall the existing driver if Windows 10 has already updated or installed it. To do that boot your system into Safe Mode by holding down the Shift key while selecting the “Restart” option from the power user menu (Win + X).

Once you are in the Safe Mode, open the Power User menu again and select the option “Device Manager.”

Once you are done, restart your system, search for “System” in the Start menu and open it.

Now comes the part where you stop Windows from downloading the driver update. To start, head over to the official site and download the update troubleshooter.

Once downloaded, execute the downloaded application.

This will trigger the scan to check for any problems and all the available updates. Once the scan has been completed, select the option “Hide Updates.”

If you ever want to unhide the update, open the application again and select the option “Show Hidden Updates.”

You’ve successfully unhidden the update so that Windows can automatically download it if need be.

Vamsi Krishna

Vamsi is a tech and WordPress geek who enjoys writing how-to guides and messing with his computer and software in general. When not writing for MTE, he writes for he shares tips, tricks, and lifehacks on his own blog Stugon.

Subscribe to our newsletter!

Our latest tutorials delivered straight to your inbox

Sign up for all newsletters.

By signing up, you agree to our Privacy Policy and European users agree to the data transfer policy. We will not share your data and you can unsubscribe at any time.

Fix: Photoshop Not Using Gpu On Windows 10 & 11

Fix: Photoshop Not Using GPU on Windows 10 & 11 [ 5 Ways] Explore expert-recommended methods to resolve the problem

617

Share

X

The reason behind the issue could be the outdated app, outdated Windows OS, or old GPU driver.

To fix it, you need to update Windows OS, and the Photoshop app, or set the maximum performance to Photoshop.

X

INSTALL BY CLICKING THE DOWNLOAD FILE

Try Outbyte Driver Updater to resolve driver issues entirely:

This software will simplify the process by both searching and updating your drivers to prevent various malfunctions and enhance your PC stability. Check all your drivers now in 3 easy steps:

Download Outbyte Driver Updater.

Launch it on your PC to find all the problematic drivers.

OutByte Driver Updater has been downloaded by

0

readers this month.

Many users have complained about the graphics processor not being detected by Photoshop. It can be frustrating as it stops you from using vital features to edit photos. Thankfully, it can be fixed.

Here, in this post, we will discuss how to fix Photoshop not using GPU issue right after talking about the causes of its occurrence.

Why does Photoshop not use GPU on Windows 10 & 11?

Expert tip:

Outdated or corrupted graphics drivers – If the graphics drivers of your device are old or corrupt, then Photoshop might not recognize the GPU. You need to update the graphics drivers to fix the problem.

Corrupted or missing files – If Photoshop is missing files or has corrupt files, then Photoshop might not be recognizing GPU.

Windows OS outdated – If you have Windows updates pending, you might get this. You need to keep your Windows updated to avoid any issues.

Photoshop app is not up to date –  The app installed on your computer is not the latest version so this issue could happen.

What can I do if Photoshop does not detect the GPU?

Before making significant changes via troubleshooting steps, make sure you go through these preliminary checks to fix the Graphics processor greyed out on Photoshop: 

Restart your computer.

Check for Windows updates.

1. Set Photoshop to high performance

Ensure your system performs smoothly and avoids all GPU driver errors by using a complete driver update assistant, namely Outbyte Driver Updater, that will do the job for you. Here’s how to safely update your drivers:

Download and install the Outbyte Driver Updater app.

Launch the software and wait for the app to detect all incompatible drivers.

Now, it will show you a list of all faulty drivers to select the ones to Update or Ignore.

Restart your PC to ensure the applied changes.

OutByte

Keep your GPU in a flawless state without worrying about possible driver issues.

Free trial Download now

Disclaimer: You may need to upgrade the app from the free version to perform specific actions.

3. Make changes to Photoshop app settings 3.1 Enable the Legacy Compositing option

Launch the Photoshop app.

Go to Performance from the left pane, select Preferences from the left pane, and place a checkmark beside Legacy Compositing. 

3.2 Modify the Cache Levels 

On the Photoshop app, go to Preferences.

Choose Performance. 

Look for Cache Levels and change them to 4. 

3.3 Disable the Use OpenCL option 4. Delete or change the location of the Sniffer app

Press Windows + E to open File Explorer.

Go to this PC and navigate to this path: C:Program FilesAdobeAdobe Photoshop

Locate Sniffer. Either delete the app or change its location.

Finally, close the window and check if Photoshop is fully operational.

Still experiencing troubles? Fix them with this tool:

SPONSORED

Some driver-related issues can be solved faster by using a tailored driver solution. If you’re still having problems with your drivers, simply install OutByte Driver Updater and get it up and running immediately. Thus, let it update all drivers and fix other PC issues in no time!

Was this page helpful?

x

Start a conversation

Update the detailed information about “Windows Could Not Complete The Installation” Windows 11/10 on the Bellydancehcm.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!