You are reading the article Windows 11 Keeps Booting In Safe Mode (Fix) updated in December 2023 on the website Bellydancehcm.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested January 2024 Windows 11 Keeps Booting In Safe Mode (Fix)
If you’re experiencing Windows 11 keeps booting into Safe Mode every time you start your computer, it can be frustrating. Safe Mode is a troubleshooting mode that allows you to start Windows with a minimal set of drivers and services, which can be useful when troubleshooting issues.
However, it’s not something you want to be using all the time. In this article, we will discuss the causes of Windows 11 stuck in Safe Mode and how to fix it and boot back into normal mode.
There are several reasons why Windows 11 may keep booting into Safe Mode. Here are some of the most common causes:
One of the most common reasons for Windows 11 to keep booting into Safe Mode is a misconfiguration of the System Configuration. The System Configuration (also known as msconfig) is a tool that allows you to control what programs and services start when you boot up your computer. It is possible that you may have enabled Safe Mode in the System Configuration, which is causing Windows 11 to boot into Safe Mode every time you start your computer.
Corrupted system files can also cause Windows 11 to boot into Safe Mode. If any of the critical system files are damaged or corrupted, Windows 11 may not be able to start normally and may instead boot into Safe Mode. This can be caused by a variety of factors, such as a hard drive failure, a malware infection, or a software glitch.
Related issue: Windows 11 won’t shut down properly
Hardware issues can also cause Windows 11 to keep booting into Safe Mode. If there is a problem with your hardware, such as a failing hard drive or faulty RAM, it may cause Windows 11 to start in Safe Mode to prevent further damage. In some cases, the hardware problem may be more subtle, such as an outdated or incompatible driver.
Third-party software conflicts can also cause Windows 11 to stuck in Safe Mode. If you have recently installed new software on your computer and Windows 11 started booting into Safe Mode afterward, it may be due to a conflict between the new software and Windows 11. This can happen if the software is not compatible with your operating system or if it is conflicting with other software on your computer.
Malware infections can also cause Windows 11 to boot into Safe Mode. If your computer is infected with malware, it may be attempting to start Windows in Safe Mode to prevent the malware from running. Malware can be difficult to detect and remove, and it may require the use of specialized tools such as an antivirus program or professional assistance.
Now that we have discussed the causes of Windows 11 keeps booting into Safe Mode, let’s look at how to fix it. Here are some steps you can take to leave Safe Mode and boot back into normal mode in Windows 11:
The System Configuration is a tool in Windows 11 that allows you to control what programs and services start when you boot up your computer. When Windows 11 boots into Safe Mode, it may be because the “Safe boot” option is enabled in the System Configuration. To check if Safe Mode is enabled in the System Configuration, you can follow these steps:
Press Win + R to open the Run dialog box.
Type “msconfig” and press Enter. This will open the System Configuration window.
Restart your computer.
If Safe Mode was enabled in the System Configuration, unchecking it should allow your computer to start normally. If you’re still having issues, you may need to try some of the other solutions outlined in this article.
Read next: Why is my memory usage so high when nothing is running?
If you cannot leave Safe Mode using the System Configuration, you can try using a command line in Command Prompt. This method involves using the command prompt to remove the Safe Mode boot option from the Windows boot menu. Here are the steps to do so:
Go to Start menu and search for “CMD“.
In the Command Prompt window, type bcdedit /deletevalue {default} safeboot and press Enter.
This will remove the Safe Mode boot option from the Windows boot menu.
Restart your computer.
If successful, your computer should boot into normal mode instead of Safe Mode. It’s worth noting that this method should only be attempted if you’re comfortable using the command prompt and have some knowledge of how it works. If you’re unsure, it’s best to seek professional assistance to avoid causing further issues to your computer.
System file corruption can cause various issues in Windows 11, including booting into Safe Mode. Corrupted system files can occur due to various reasons, such as a malware infection, software conflicts, or hardware issues. Fortunately, Windows 11 has a built-in tool called the System File Checker (SFC) that can scan and repair corrupted system files. Here are the steps to check for system file corruption using SFC:
Open Command Prompt as an administrator.
In the Command Prompt window, type sfc /scannow and press Enter.
The System File Checker tool will scan your system for corrupted files and repair them if possible.
The scanning process may take some time depending on the size of your system and the severity of the corruption.
Once the scanning process is complete, you should see a message indicating whether any corrupted files were found and whether they were repaired.
If SFC was able to repair any corrupted files, restart your computer and check if the problem is resolved. If not, you may need to try some of the other solutions outlined in this article.
If you’re not comfortable using the command prompt or if the System File Checker tool is unable to repair the corrupted files, you may need to seek professional assistance to diagnose and fix the issue.
If you recently installed new software on your computer and Windows 11 started booting into Safe Mode afterward, it may be due to a conflict between the new software and Windows 11. In such cases, the best solution is to uninstall the incompatible software.
If you’re not sure which software is causing the problem, you may need to uninstall the suspected programs one by one and restart your computer after each removal to see if the problem is resolved.
Hardware issues can also cause Windows 11 to keep booting into Safe Mode. If there is a problem with your hardware, such as a failing hard drive or faulty RAM, it may cause Windows 11 to start in Safe Mode to prevent further damage. In some cases, the hardware problem may be more subtle, such as an outdated or incompatible driver. Here are the steps to check for hardware issues and update drivers in Windows 11:
Search for “Device Manager” and select it from the search results.
In the Device Manager window, look for any devices with a yellow exclamation mark next to them. This indicates that there is a problem with the device.
If Windows is unable to find updated drivers, you may need to visit the manufacturer’s website and download the latest drivers manually.
If updating the drivers does not solve the issue, you may need to check for other hardware issues. Run hardware diagnostics on your computer to check for any problems. You can also open your computer and check the connections to ensure that everything is properly connected.
Performing a system restore can be an effective solution if all other troubleshooting steps have failed to fix the issue. System restore allows you to revert your computer to a previous state when it was working correctly. This can be helpful if the issue occurred after a recent software installation, update, or system configuration change.
It’s worth noting that performing a system restore will remove any programs or updates that were installed after the restore point. So, if you’ve installed any important software or updates since the restore point, you’ll need to reinstall them afterward.
If all else fails, resetting or reinstalling Windows 11 may be necessary. Resetting your PC is a useful option when you want to keep your files and data but return Windows 11 to its original settings. Reinstalling Windows 11 is a more drastic option that involves wiping the hard drive and starting from scratch.
It’s important to note that reinstalling Windows 11 will remove all the files and data from your computer, so make sure to back up any important data before proceeding with this step. If you’re not comfortable performing these steps yourself, consider seeking professional assistance to avoid causing further issues to your computer.
Prevention is always better than cure when it comes to PC issues. Keeping your system updated, running regular virus scans, and avoiding downloading software from untrusted sources can help prevent problems like this from occurring. If you do encounter issues, it’s always a good idea to seek professional assistance if you’re not comfortable performing the troubleshooting steps yourself.
You're reading Windows 11 Keeps Booting In Safe Mode (Fix)
Keyboard Keeps Disconnecting In Windows? 11 Ways To Fix
Does your USB keyboard keep disconnecting and reconnecting on your Windows PC? Don’t panic! Work through this list of potential fixes.
Reboot Your ComputerTable of Contents
Eliminate the Keyboard as a SuspectIt’s tempting to think that there might be something wrong with the computer rather than the keyboard, but your keyboard is the easiest component to eliminate as the source of the problem. Try using the keyboard with a different computer. If the problem follows the keyboard around, it’s likely an issue with the device.
Unfortunately, there’s not much you can do with a faulty keyboard, but some wireless keyboards do let you update their firmware. If new firmware has been released for your keyboard, it may be worth installing it in case it solves a related bug. If the problem is specific to your keyboard, you should also consider contacting the manufacturer for technical support.
1. Use the On-Screen KeyboardMany of the fixes below are much easier if you can type search terms into the Start Menu search bar. If your keyboard is disconnecting all the time or won’t work at all, that can be a hassle. So it’s a good idea to activate the on-screen keyboard so that you can type with your mouse pointer instead.
Toggle
Touch Keyboard
on.
A small icon will appear in the notification area of your Taskbar.
2. Run the Keyboard Hardware TroubleshooterThe keyboard troubleshooter is a good place to start.
Open the Start Menu and search for “fix keyboard” then select Find and fix keyboard problems. You can also find this troubleshooter by searching in the Control Panel.
Once the tool opens, simply follow the instructions and check whether any problems are detected by the app. It may try to update drivers or restart the USB controller, so you may have to approve a few things if it does find issues.
3. Check Your Batteries!If you’re using a battery-powered wireless keyboard, make sure your batteries have enough power. This is especially true if you have alkaline batteries because they can recover some voltage when the keyboard is off, making it appear as if the keyboard is connecting and then disconnecting when you switch it on.
If your keyboard has an integrated lithium battery, it may also be old or damaged, in which case the battery or the whole keyboard may need an update.
4. Update Windows or Roll Back the UpdateWindows receives a constant stream of updates, and it’s not uncommon for one of these updates to cause hardware issues. It’s also possible that your Windows installation needs an update to work with the current version of your software packages or drivers.
If your problems started right after a Windows update, you may want to roll back that update. You may want to try the opposite if you have pending Windows updates.
5. Update Your Chipset or Bluetooth DriversIf you’re using a USB keyboard, that hardware is governed by your motherboard’s chipset drivers. The chipset is the collection of integrated peripherals and processors on the motherboard. Windows may have installed an incorrect driver for your chipset, or the chipset is outdated for the version of Windows or applications you’re using.
The answer is to head to the manufacturer’s website of the motherboard, laptop, or prebuilt computer you’re having issues with and download the latest chipset driver. If you’re using a Bluetooth keyboard, you may want to download the latest Bluetooth driver for your computer, which should be on the same download page as the chipset driver.
6. Check for Obstructions and InterferenceIf you’re using a wireless keyboard, signal interference is another common reason you may suffer disconnections:
Are you too far from the computer?
Check that there are no metal objects between the computer and the keyboard.
Check that there aren’t sources of radio interference, such as many other Wi-Fi or Bluetooth devices. The same goes for electrical motors, microwave ovens, etc.
If your computer has an external Bluetooth adapter, reposition it or its antenna for a better Bluetooth connection.
7. Disable USB Selective SuspendWindows has a power management feature known as USB selective suspend. This allows the USB hub to suspend devices on specific connectors without affecting other ports and the devices connected to them.
Sometimes, selective suspension can erroneously suspend the port your keyboard is connected to and then take a second or two to bring it back online, which may feel like a keyboard disconnect to the user.
It’s worth disabling this feature to see if that’s the cause of your intermittent keyboard functionality.
Open the
Start Menu
and search for
Edit Power Plan
.
If you don’t see the option under Power Management, you can try toggling it off in the Device Manager.
Open the
Start Menu
, type
Device Manager
, and select the result when it pops up.
Under the
Power Management tab
, uncheck ”
Allow this computer to turn off this device
, ” then select
OK
to save your changes.
8. Switch to Proprietary Wireless StandardsSome wireless keyboards offer you a choice between Bluetooth or a proprietary wireless adapter that should have come with the keyboard. For example, the Logitech Unified Receiver works with many Logitech Bluetooth keyboards. If you’re having Bluetooth-related problems, this is one workaround that can solve your disconnection problems.
9. Plug Your Keyboard Into a Different USB PortSince USB was first introduced to home computers in the late 90s, it’s always had the odd mysterious bug where a USB device wouldn’t work correctly in one port, but will work perfectly well in another, even if both ports use the same USB controller.
There are actually numerous reasons why this happens, but in every situation the solution is usually to move the keyboard to a different USB port or to move the wireless USB receiver to another port.
10. Plug Your Keyboard Directly Into the PCSome wireless keyboards give you the option of using a wired connection. So if your Bluetooth keyboard keeps disconnecting, you could use a cable. Even if only as a temporary fix!
If you’re using a wired keyboard through a hub or through another USB device, try plugging the keyboard directly into the computer. Remove any cable extensions as well. If any of the devices between the keyboard and the computer aren’t working correctly, they might interfere with the keyboard.
Make sure to plug the keyboard into one of the USB ports directly on the motherboard on desktop PCs. That means avoiding using the front USB ports or any ports that use extension cables from the motherboard.
If the problem persists even when plugged into a USB port directly connected to the motherboard, it’s likely to be an issue with the motherboard’s chipset driver.
11. Uninstall and Reinstall the Keyboard in Device ManagerIf none of the tips above solve your issue, the last trick worth trying is removing the keyboard from Device Manager and reinstalling it.
3. Select Uninstall again in the confirmation window that pops up. Don’t tick Attempt to remove the driver for this device if you’re asked. You may want to remove the keyboard driver on a second attempt if this method doesn’t work the first time.
The list should flash a few times as it refreshes, and the keyboard should now be back in the same place. Try to use the keyboard again to see if the disconnecting issue has been resolved.
How To Fix Hibernate Mode Not Working In Windows 11
The Hibernate mode in Windows 11 is a great feature to have when you leave your PC or laptop running for a while but need your current apps and programs opened when you come back to work. However, after upgrading to Windows 11, we have seen many users report that the Hibernate mode in Windows 11 is not working on their devices, even after enabling it from the Power Options menu in Control Panel.
So, if you are amongst the few users who are facing issues with the Hibernate mode in Windows 11, this article is for you. Hence, read this in-depth guide till the end to fix the Hibernate mode not working in Windows 11 issue on your PC or laptop. So, let’s dive right in, shall we?
Fix Hibernate Mode Not Working in Windows 11
In this section, we have listed some of the best fixes that you can try when you face the Hibernate mode not working in Windows 11 issue on your device. So, check them out right below and try them one by one on your device to get the Hibernate mode up and running on your device.
1. Restart Your Windows 11 Laptop or PC
Now, when the Hibernate mode stops working in Windows 11 on your device, the first thing you should try is restarting your PC or laptop. A quick restart of your Windows 11 system does more than what you think and often fixes minor issues, including issues like the Hibernate mode not working in Windows 11.
Following the restart, check whether the Hibernate mode is working now. If it is not fixed, proceed to the next fix.
2. Run the Power Troubleshooter in Windows 11
Now, the next thing you can try when you experience the Hibernate mode not working issue on your Windows 11 PC or laptop is running the Power troubleshooter. You see, Windows 11 comes with dedicated troubleshooters to fix misconfigured settings and minor issues in your system.
Thankfully, there is a troubleshooter to troubleshoot power-related issues. There is a high chance that the Power troubleshooter in Windows 11 will fix the Hibernate mode and get it up and running again. So, to run the Power troubleshooter in Windows 11, follow the steps right below:
1. Use Windows + I to launch the Settings app in Windows 11.
2. Under the System tab, go to Troubleshoot.
5. Wait for the troubleshooter to do its thing and make the suggested changes (if any are provided).
Now, that you have run the Power troubleshooter in Windows 11 and adjusted the suggested settings, check whether the Hibernate mode not working in Windows 11 has been fixed or not. If it is fixed, well and good. However, if you are still facing it on your PC or laptop, move on to the next fix.
3. Disable Fast Startup in Windows 11
The fast startup feature often causes power-related issues like the Hibernate mode not working issue in Windows 11. Hence, there is a high chance that disabling it could fix such issues on your PC or laptop. So, to disable fast startup in Windows 11, follow the steps right below:
1. Open the Control Panel in Windows 11.
2. Go to the System and Security menu.
5. Next, uncheck the box for the Turn on fast startup (recommended) feature to disable fast startup in Windows 11.
Now that you have disabled fast startup on your PC or laptop, check whether the Hibernate mode not working in Windows 11 issue has been fixed or not. If it is not, check out the next fix.
4. Reset Your Power Plan to Default in Windows 11
Now, if you are facing the Hibernate mode not working in Windows 11 issue on your device with your current Power plan, you can try resetting it to default. Resetting your Power plan to its default settings in Windows 11 could potentially fix the Hibernate not working issue on your device and hence, it is worth a try. So, to reset your Power plan in Windows 11, follow the steps right below:
1. Use Windows + S to open Windows search and search for “cmd” (without quotes).
3. Once the Command Prompt tool opens in Windows 11, type in the following command and press Enter:
powercfg –restoredefaultschemes4. Once the process is complete, exit the Command Prompt tool.
Now that you have reset your power plan to default in Windows 11, check whether the Hibernate not working issue has been fixed on your PC/ laptop or not. If, however, it still persists, proceed to the next fix.
5. Create a New Power Plan in Windows 11
If resetting the Power plan to default did not fix the Hibernate mode not working in Windows 11 issue, create an entirely new Power plan on your PC or laptop. Creating a new Power plan could avoid any minor issue in your current Power plan that might be preventing the Hibernate mode to work in Windows 11. So, to create a new Power plan in Windows 11, follow the steps right below.
1. Launch the Control Panel in Windows 11.
2. Go to the System and Security menu.
4. Now, from the left pane, choose the Create a power plan option.
Now that you have created a Power plan in Windows 11, wait for a few moments. Then check whether the Hibernate mode is working on your Windows 11 PC or laptop or not. At this point, it should be fixed.
6. Run SFC Scan in Windows 11
Now, if all the above methods fail to fix the Hibernate mode in Windows 11, you can try running the System File Checker (SFC) scan on your device. The SFC scan is essentially a command-line tool that scans the system files in Windows 11 and replaces missing/ corrupt system files in the directory.
This often solves many system-level issues in Windows 11, and there is a high chance that it could fix the Hibernate mode not working in Windows 11 issue on your device. So, to run an SFC scan in Windows 11, follow the steps right below:
1. Use the Windows + S shortcut to open Windows search and search for Command Prompt.
3. Once the Command Prompt tool opens, type in the following command and press Enter:
sfc/ scannow4. Once the scan is complete, restart your Windows 11 device.
Following the restart, check whether the SFC scan was able to fix the Hibernate mode not working in Windows 11 issue on your PC or laptop. If it was not able to fix it, check out the next fix.
7. Run DISM Scans in Windows 11
The Deployment Image Servicing and Management scans, aka DISM scans, are a set of scans that checks the disk images in Windows 11 to detect issues and fix them. Hence, much like the SFC scan, the DISM scans often fix various issues such as the one you are currently facing in Windows 11. So, to run the DISM scans in Windows 11, follow the steps right below:
1. Launch the Command Prompt tool as an administrator as explained above.
2. Once the Command Prompt tool opens in Windows 11, type in the following command and press Enter one by one:
DISM /Online /Cleanup-Image /CheckHealth DISM /Online /Cleanup-Image /ScanHealth DISM /Online /Cleanup-Image /RestoreHealthNote: Run the above commands one by one and not simultaneously in Command Prompt. Start with the first one and then work your way to the last one.
3. Once all the DISM scans are completed, restart your Windows 11 laptop or PC.
Following the restart, check whether the Hibernate mode not working in Windows 11 issue has been fixed on your device or not.
Now, outdated Windows 11 versions can sometimes cause various system-level issues due to unusual bugs and glitches. These include issues like Dolby Atmos not working, FTP client not working, Hibernate mode not working, and many others. In this case, you must check for the latest Windows 11 updates that need to be installed on your device. to do that, follow the steps right below:
1. Use Windows + I to launch the Settings app in Windows 11
4. After the updates are installed, restart your Windows 11 laptop or PC.
Following the update and restart, check whether the Hibernate mode not working in Windows 11 issue has been fixed on your device or not.
Frequently Asked Questions
Is there a Hibernate mode in Windows 11?
Yes, there is a Hibernate mode in Windows 11 which is disabled by default. You can enable the Hibernate mode button in Windows 11 from the Power Options menu in Control Panel.
Why is the Hibernate mode not working in Windows 11?
There can be a ton of reasons why the Hibernate mode is not working on your Windows 11 laptop or PC. These include misconfigured power settings, issues in system files, outdated Windows versions, and many others.
Does Hibernate mode keep my apps open in Windows 11?
Yes, much like the Sleep mode, the Hibernate mode in Windows 11 keeps all your apps, files, and folders that were already opened on your device. However, unlike Sleep mode, the Hibernate mode saves more power by storing the data directly onto the hard drive and is also not affected by power cuts.
Wrapping Up
So, these were the top fixes that you can try when the Hibernate mode stops working on your PC or laptop. The above-listed fixes are some of the most common troubleshooting ways to fix the Hibernate mode not working in Windows 11 issue.
How To Boot To Recovery Mode (Safe Mode) In Ubuntu
Sometimes things go wrong, even on Linux systems, and you need a way to get your computer back to full functionality. On Windows, Safe Mode is usually the first choice to get back in and fix a problem. However, on Linux, there really isn’t a direct counterpart.
On most Linux distributions i, the solution involves using a Live CD to access files on your hard drive or even using a chroot. Ubuntu has come up with a clever solution in recovery mode. It lets you perform several key recovery tasks, including booting into a root terminal to give you full access to fix your computer.
Note: this will only work on Ubuntu, Mint, and other Ubuntu-related distributions.
Boot to Recovery Mode in UbuntuAs you’re booting your computer, wait for the manufacturer logo to flash from the BIOS. If your computer boots too quickly, you’re going to need to do this immediately after powering it on. Quickly press either the Shift or Escape key. On newer computers, it’s probably Escape. The timing has to be near perfect on some computers, so you may have to press it repeatedly. If you miss the window, reboot and try again.
GRUB will take you to a new menu. Toward the bottom you’ll see one of the entries with “Recovery” listed in parentheses.
You’ll arrive on a simple screen with a blue background and a box containing a series of recovery options. This is the main recovery menu for Ubuntu; it allows you to do many of the common tasks required to fix a broken system.
Understanding Recovery OptionsAs you can tell, you now have seven options to help recover Ubuntu. Depending on the issue you’re facing, you’ll want to choose the right one for your needs.
Each option does the following:
The Root TerminalMany problems can only be solved as root, and they require more manual intervention than what the default options in the recovery menu provide. When it looks like you’re dealing with one of these cases, select “Drop to root shell prompt” to boot into a root terminal.
As soon as you select it, you’ll see the bottom of your screen switch to a terminal and log in as root. Before you can do much, you’re going to need to remount the root partition of your drive. By default, it’s mounted read-only for safety purposes, but you’ll probably need to modify something to fix whatever issue’s going on. To remount it with write permissions, run the following command.
mount
-o
remount,rw/
If you have additional partitions you need to work on, you’ll need to remount them as well. That includes when your “/home” directory is on a separate partition. You can remount them all at once simply with:
mount
-a
Now you’re ready to dig around in your system and resolve the problem that’s preventing you from booting normally. You’ll have access to everything on your system as root, so be careful not to damage anything in the process. Making backups, even just copies of the files you modify, is a great idea. Once you’ve uncovered and remedied the problem, reboot your system and boot normally.
Can’t Access GRUB Boot MenuIf for any reason you can’t access Ubuntu’s GRUB boot menu, you won’t be able to boot into recovery mode in Ubuntu. This usually means the bootloader and/or your Ubuntu system has been corrupted somehow. The easiest solution is to reinstall Ubuntu using a Live CD. There are a variety of reasons to have a Live CD on hand, and this is just one of them.
This method allows you to usually keep your files (as long as the hard drive isn’t corrupted beyond use). Plus, you’ll be able to repair whatever is going on with a fresh installation.
In most cases, booting into recovery mode in Ubuntu should be your first step for troubleshooting many issues you encounter. And, hopefully, you won’t need to reinstall Ubuntu at all.
Crystal Crowder
Crystal Crowder has spent over 15 years working in the tech industry, first as an IT technician and then as a writer. She works to help teach others how to get the most from their devices, systems, and apps. She stays on top of the latest trends and is always finding solutions to common tech problems.
Subscribe to our newsletter!
Our latest tutorials delivered straight to your inbox
Sign up for all newsletters.
By signing up, you agree to our Privacy Policy and European users agree to the data transfer policy. We will not share your data and you can unsubscribe at any time.
Mouse Keeps Freezing On Windows? How To Fix It
This problem could be caused by connectivity issues, such as a faulty wire or a dead battery. If the mouse settings are misconfigured, this can also cause the mouse to freeze. This is very likely if you are using a mouse control software.
The causes of mouse freezes can be numerous and difficult to identify at first glance. Today, we will discuss those causes as well as their relevant fixes.
Misconfiguration of Pointer Speed
Slow Computer
Issues with the Mouse Drivers
System Files Corruption
Malware and Virus Infection
Here are some preliminary troubleshooting measures that you can take to resolve this issue:
Use a smooth surface to operate, ideally a mouse pad, and also clean the mouse.
Connect a spare mouse and see if it also freezes. This also helps to identify if the problem is with the mouse or the system itself.
Restart the computer to ensure that the problem is not caused by temporary glitches in the Operating system.
Signal interference can affect how a wireless mouse functions. Maintain close proximity to your computer to combat this.
If these troubleshooting measures do not work for you, follow these fixes to get your mouse functioning normally. While attempting these fixes, you can navigate through the Windows Settings using the Keyboard.
The majority of the time, Mouse freeze does not occur due to issues with the mouse or its drivers. Background processes that consume resources contribute to system slowdown and can cause the mouse to freeze.
Follow these steps to end such background processes.
Press Ctrl + Shift + Esc to open the Task Manager.
In the Processes section, search for the processes or applications with High CPU usage.
Navigate to the process and press the Menu key on your Keyboard.
Select the End Task and close the Task Manager.
Now, use the mouse to see if it is working normally.
This feature enhances the mouse acceleration by adjusting the DPI. It automatically changes the DPI when the mouse cursor is moved. If the system does not handle this adjustment correctly, this might slow down the mouse cursor, which may look like a mouse freeze.
Here’s how to disable this feature.
Press Windows Key + I to open Settings.
Go to the Pointer Options tab.
Under the Motion section, uncheck the Enhance pointer precision option.
Select Apply to save changes.
If you use mouse control software to customize the controls of your mouse, try resetting the mouse settings to default. Control misconfigurations also can cause the mouse to freeze.
There are varieties of mouse control software available online. For your reference, we will guide you on how to reset the Logitech’s software.
Open the Logitech Options Software.
Go to the Mouse Section.
Close the software and then check if the mouse is working fine.
Most of the time, the fault is with the mouse drivers. If the mouse drivers are outdated or have some underlying issues with it, it can cause a mouse malfunction such as this. To overcome this, users can update the mouse drivers and see if this solves the issue.
Press the Windows key + R, type devmgmt.msc, and hit enter to open the Device Manager.
Navigate to Mice and other pointing devices to expand the list of devices under it.
Select the device and press enter.
Go to the Driver tab and select Update Driver.
Select Search automatically for drivers and follow the prompts to update the mouse drivers.
If updating the driver gives you no resolution, sometimes reinstalling can work as well. If the drivers are corrupted, this method can fix them and make the mouse function normally.
Go to Device Manager.
Use your keyboard to navigate to the Mice and other pointing devices, and press the right-arrow key to expand the list.
Select the mouse driver you want to reinstall and hit enter.
Go to the Driver tab and select Uninstall Device.
Give you a confirmation to uninstall the device driver.
Restart the computer. When the computer boots up, it will automatically install the generic mouse driver.
Finally, check if the mouse is working as intended.
If you see any conflicting drivers that might be affecting the mouse’s performance, you can uninstall those too, using this method. For the mouse that uses third-party OEM drivers, you can download them from the manufacturer’s respective website and install them manually.
There is a possibility of system file corruption or similar issues that migh be contributing to this mouse issue. The SFC and DISM scans diagnose and recover such files to bring stability to the system.
Press Windows Key + X.
Select Terminal (Admin) to launch the command prompt with elevated privileges.
Viruses and Malware can cause serious problems for your system. They are well-known for causing system malfunctions (including mouse freezes) and even stealing your data. To get rid of these and even prevent future infections, install antivirus software and perform manual scans on a regular basis.
For your reference, here is how you can run such scans on Windows defender.
Press Windows Key + R, type windowsdefender://threat/, and hit enter.
Navigate using your Keyboard and go to Scan options.
Mouse freezes are obvious if you have set the Pointer speed to low. Technically, the mouse does not freeze in this case, but it does slow down the overall acceleration of the mouse cursor, making it appear stuck.
In this case, you can easily change the pointer speed on windows using these steps.
Press Windows Key + I to open up Settings.
Many users have reported experiencing this problem after the Windows updates. Users can resolve this by uninstalling the most recent updates and reverting to the previous working state.
Press Windows + I to open the Windows Settings.
6 Ways To Fix Windows Powershell Keeps Popping Up
Some apps are set to run on startup, making them launch as soon as Windows boots up. But if it’s the Windows Powershell popping up, then you have a problem. As it turns out, this is a known issue affecting a fair share of Windows users. Fortunately, there are ways to fix it, as detailed in this guide.
Tip: you can use Powershell to hide annoying Windows updates. We show you how.
General FixesBefore applying problem-specific fixes, these general tips could help you solve the problem if it was caused by a virus or a bug in the system.
Scan PC with malware removal tool: if you have a third-party antivirus or anti-malware program, you can search the computer for any malicious software. But if you don’t, you can have Windows Defender run a full scan on your computer.
Perform Chkdsk, DISM, and SFC scans: Windows has a few valuable utilities to check system files and ensure they are intact and that no corrupted files exist in your system folder. By typing the associated commands, you can run these utilities in the Windows Terminal or PowerShell.
Update Windows: go to settings and check for any available updates in the Windows Update tab.
Run the System Maintenance troubleshooter: Open the Run window by pressing Win + R, then type in %systemroot%system32msdt.exe -id MaintenanceDiagnostic and hit Enter to open the System Maintenance utility.
1. Check Whether a Task or Script Is Running in the BackgroundYour Windows system relies on PowerShell to launch background processes or authorize applications to access security files. If Windows PowerShell keeps popping up, there is a good chance that your system is running update processes or vital background tasks. You can check whether that’s the case by following these steps:
Review the list to see which process uses the abnormal amount of CPU. If it’s an unknown process, search the name in Google to see if it’s okay to end the task.
Alternatively, if it’s a process named “wsappx” or any service using too much CPU, it means Windows is updating an app or itself.
Note: if you notice PowerShell in Task Manager, then ending the task would not help, and you should move on to the next fixes.
2. Boot in Clean ModeLaunch the Run box by pressing the Windows + R keys simultaneously. Type in msconfig and press Enter.
In the “General” tab, select “Selective Startup” and uncheck “Load startup items.”
Good to know: learn how to run a Java program in Command Prompt.
3. Disable Windows Powershell TemporarilyYou can use the Command Prompt to disable Windows PowerShell temporarily. If you use PowerShell to disable itself, it may end up crashing and causing issues. Note that this method works on Windows 10 1803 and requires admin privileges.
Type the following commands and press Enter after each one. Remember to re-enable the PowerShell later. To disable it, type:
Dism/
online/
Disable-
Feature/
FeatureName: MicrosoftWindowsPowerShellV2RootTo re-enable it, type:
Dism/
online/
Enable-
Feature/
FeatureName: MicrosoftWindowsPowerShellV2Root 4. Delete Powershell Shortcut from Startup FolderThe Startup folder contains all the Startup application shortcuts so that Windows can run them as soon as it boots up. The Windows “PowerShell.exe” shortcut can also be found in this folder, as, most of the time, this app is set to launch on startup. Thus, if Windows PowerShell keeps popping up, you should locate and delete this app’s shortcut from the Startup folder.
Launch the Run box by pressing the Windows + R keys. Type in %ProgramData%MicrosoftWindowsStart MenuProgramsStartUp and hit Enter.
Tip: check out all of the options available to open Task Manager in Windows.
5. Delete the Powershell Startup Status on the Task ManagerYou can also disable the PowerShell startup status via Task Manager to prevent it from launching on startup.
6. Use the Microsoft Autoruns ProgramMicrosoft offers a powerful tool to stop apps that are set to run automatically on your Windows.
Download Autoruns.
Open the app, and In the “Logon” tab, locate “PowerShell” and uncheck its box.
Tip: Is Microsoft Store not functioning as it should? We show you how to fix it.
Frequently Asked Questions Is it OK to disable PowerShell indefinitely?Although we don’t encourage you to do so, sometimes your only choice is to disable this console indefinitely. Windows should be fine without PowerShell since it can use Command Prompt, but PowerShell is an upgraded version of Command Prompt that can do much more than cmd.
What can PowerShell do that Command Prompt can’t?While PowerShell is built on the .NET platform, it can communicate with Windows objects even at the core level, unlike Command Prompt, which can’t.
Can I update Windows PowerShell?Windows updates system-related apps with each Windows update, so there is no need to update PowerShell separately. Still, you can update PowerShell manually without waiting for Windows to do it for you with the next update. To get PowerShell updates from the Microsoft Store app, search Windows PowerShell in the Microsoft Store Windows application, and the first app displayed is the one you are looking for.
Image credit: Pexels. All screenshots by Farhad Pashaei.
Farhad Pashaei
As a technophile, Farhad has spent the last decade getting hands-on experience with a variety of electronic devices, including smartphones, laptops, accessories, wearables, printers, and so on. When he isn’t writing, you can bet he’s devouring information on products making their market foray, demonstrating his unquenchable thirst for technology.
Subscribe to our newsletter!
Our latest tutorials delivered straight to your inbox
Sign up for all newsletters.
By signing up, you agree to our Privacy Policy and European users agree to the data transfer policy. We will not share your data and you can unsubscribe at any time.
Update the detailed information about Windows 11 Keeps Booting In Safe Mode (Fix) on the Bellydancehcm.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!