Trending December 2023 # Windows 10/11 Updates Ignore Active Hours? Try This # Suggested January 2024 # Top 18 Popular

You are reading the article Windows 10/11 Updates Ignore Active Hours? Try This updated in December 2023 on the website We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested January 2024 Windows 10/11 Updates Ignore Active Hours? Try This

Windows 10/11 updates ignore active hours? Try this






Try Outbyte Driver Updater to resolve driver issues entirely:

This software will simplify the process by both searching and updating your drivers to prevent various malfunctions and enhance your PC stability. Check all your drivers now in 3 easy steps:

Download Outbyte Driver Updater.

Launch it on your PC to find all the problematic drivers.

OutByte Driver Updater has been downloaded by


readers this month.

Updating Windows 10 is an integral part of what it means to keep your OS in neat condition.

It presumes downloading the latest upgrades, tweaks, and fixes for some of the most common problems reported.

Unfortunately, having to forcefully restart your PC isn’t all that convenient, especially when you are running a network of multiple PC’s.

How to set up active hours on Windows 10:

Press Windows

Go to Settings (The cogwheel-shaped button)

Select the Change active hours option

Enter a time interval you wish to not have any updates downloaded

You can only input a time interval of up to 18 hours, anything over that value will be deemed invalid

You can also make the computer to automatically change your active hours based on your average PC usage.

However, some users are complaining that Windows 10 is ignoring this feature:

How can I stop Windows 10 from performing it’s very large Windows Updates download during normal business hours? I have ‘Active Hours’ set to non-business hours but Windows 10 will still download massive amounts of data over a limited WAN connection. […] I want the download to be done after hours when the office is closed and the computer left on as to have no negative business impact.

How do you make your Windows 10 to stop ignoring your active hours?

Please remember that active hours are not for controlling the download of Windows updates, but for installing the downloaded Windows updates.

It will keep downloading updates but will install only during specified active hours.

You absolutely have no control over the timing of Windows updates download.

As such, all you are left with is controlling when will your PC restart for certain updates to take effect.

These steps can only be followed by a group administrator running Windows Server 2023 version 1903 and later:

Press Windows

Type in Group Policy

Go to Group Policy

Access Configure Automatic Updates

Select option 4 – Auto download and schedule the install

Input time in the Scheduled install time dropdown

By following these steps, you will force restart after the specified installation time.

This will also let you configure a timer to warn a signed-in user that a restart is going to occur.

If all else fails, simply consider shutting down automatic updates on Windows 10, and installing them manually when you have the time.

3. Wait it out

If the problem persists even after both you and the administrator have followed these steps, all you can do is wait for a new patch that may fix this issue.


Still experiencing troubles? Fix them with this tool:


Some driver-related issues can be solved faster by using a tailored driver solution. If you’re still having problems with your drivers, simply install OutByte Driver Updater and get it up and running immediately. Thus, let it update all drivers and fix other PC issues in no time!

Was this page helpful?


Start a conversation

You're reading Windows 10/11 Updates Ignore Active Hours? Try This

Can’t Connect To This Network Wifi Error In Windows 11/10

Several issues come up on Windows 11/10 computers, and one of the most frustrating ones is that Windows can’t connect to this network error. This error appears with no obvious indication of what’s causing it or how to fix it, making it tough to debug for many people. And we all know how vital our computer’s network connection is. So, if you’ve tried connecting your Windows PC to the network but it’s not working, we’ve got you covered. Most of the time, the cause of this problem can be traced to a few factors, which we’ll go over in this post, along with the best ways to fix Windows that can’t connect to this network error. Do stick with us to the end.

What should you know about Windows can’t connect to this network error?

However, using the approaches we’ll discuss in this article, it’s still something that can be fixed. But, before we get into that, here are the most likely causes of the error:

Wrong Network Configuration

Corrupt Update

Buggy Drivers

Modem/Router issues

Fix Windows can’t connect to this network

If you keep getting the Can’t connect to this network error whenever you try to access the internet on your computer, the first thing you should do is restart the computer as well as the router/modem and then try connecting to the network again. This can help you determine whether the problem is a minor one or one that will necessitate some computer tweaking to be resolved. If it doesn’t solve the problem, move these fixes.

Update Windows/Uninstall Windows Update

Run Network Troubleshooter

Change Network Adapter Settings

Update Network Driver

Make sure your network source is near

Forget Networks

Make sure WiFi physical switch is on

Flush DNS and Reset IP

Disable IPv6

Reset Network.

Now, let’s dive into discussing the fixes in full detail.

1. Update Windows Windows 11

Press Windows + I keys to open Settings.

Select Windows Updates.

If there are any updates available, install them and try connecting your internet once again.

Windows 10

Open Settings on your computer.

Check for any available updates and install them.

If conflicting updates on your machine cause the issue, this should help you resolve it. Furthermore, if your computer’s network adapter isn’t compatible with the most recent Windows update, and you probably recently updated your computer before the problem appeared, you may need to remove Windows Update to resolve the Windows can’t connect to this network issue.

Read: PC won’t connect to internet but other devices will

2. Run Network Troubleshooter

The Windows Network troubleshooter can be used to resolve general network issues. This operation will assist you in identifying the issue and guiding you on how to fix it.

In Windows 11/10 you can access the built-in Troubleshooters via the Settings Troubleshooters page. You can also run the Troubleshooters from the command line. Now as far as troubleshooters to fix Network-related issues are concerned, they are as follows:

Shared Folders Troubleshooter

Network Adapter Troubleshooter

Internet Connections Troubleshooter

Incoming Connections Troubleshooter

Connection to Workplace using DirectAccess Troubleshooter.

However, the troubleshooter may not be able to identify all problems, which is why we’ve compiled the additional solutions we’ve discussed to assist you.

Fix: Network & Internet connection problems in Windows

3. Change Network Adapter Settings

Making a little tweak to the network adapter setting could help in fixing Windows can’t connect to this network, and here is how:

Open Settings on your computer.

Select Network and Internet.

Hit Configure… and switch to the Advanced tab.

Select 801.11d from the Property list and change the value to Enabled.

Fix: No internet, Secured error in Windows 11/10

4. Upgrade Network Driver

Drivers are the software that allows your computer to communicate with any connected devices – so you need to update your Network Drivers. Thus, if your network adapter is malfunctioning, you will undoubtedly encounter difficulties when attempting to connect to a network, and this could be the source of your computer’s problem.

To update Network drivers in Windows 11/10, you have the following methods:

Using Windows Optional Update

Download from official website

Use driver update software

Using Device Manager

This issue does not identify the root of the problem, but we must try out the various solutions, and one of the first things you should do is check out:

If you visit your manufacturer’s site to check for and download the latest driver, after downloading the file, do this:

Open Device Manager.

Hit Update driver and choose to select the driver from your file.

Follow other on-screen instructions to finish the process.

After doing all these, restart your computer and try reconnecting with your network. If the issue started just after you’ve updated your network driver, then you should roll back the driver to the prior one.

Fix: Limited Network Connectivity message.

5. Make sure your network source is near

If you’re using a router to connect to the internet, you’ll need to place it as close to your computer as possible to establish a connection. Some people install their router far away from where they use their computer, which could be the source of your network problem. As a result, aim to locate your internet source as close as possible to where you will be utilizing it. Some basic suggestions can help increase WiFi Speed Signal strength and coverage area.

6. Forget Network

Windows computers store the WiFi profiles they’ve once connected with and forgetting some of these networks can help fix the issue you are facing while trying to connect to the internet if conflicting networks cause the problem.

Fix: Windows Connectivity issues with Hotspots and Wi-Fi adapters.

7. Make sure WiFi physical switch is on

Some PCs come with a physical WiFi switch, and if this isn’t on, you won’t be able to connect to the internet with WiFi. If you are using this kind of computer, try to toggle on the switch before joining your WiFi

Read: WiFi connected, but no internet access.

8. Flush DNS and reset IP

Corrupt DNS caches may also be the reason behind the inability to connect to the internet on your computer. This can, however, be fixed by releasing TCP/IP, flushing DNS, resetting Winsock, and resetting Proxy. So you can try making use of this method to fix the network issue on your computer by

You can then try connecting your network again and see if the issue has been fixed or not. If not, try the next solution.

9. Disable IPv6

The IPv6 isn’t always needed on PCs, and disabling it can help resolve the network issue you are getting when trying to connect your computer. So, to disable IPv6, do this:

Navigate to Internet Protocol Version 6 and uncheck the box.

Select OK to save the changes and restart your computer afterward.

10. Reset Network

Another effective way to fix network issues in Windows computers is to reset the network. Simply follow the link to perform the troubleshooting and try reconnecting to your internet source.

Why does my computer keep saying I can’t connect to this network?

The Windows can’t connect to this network problem is usually caused by network adapter issues, and your computer may need to have its adapter settings tweaked or its drivers updated. However, a malfunctioning internet source could be the source of the problem, which can be confirmed by testing the router/modem with another device. It is the former if it works; if it does not, you should try another internet provider.

Does running a Network troubleshooter fix Windows can’t connect to this network?

Can’t Connect Airpods To Windows? 11 Fixes To Try

Windows 11’s recent release has brought along numerous changes and one of them has been how the OS handles Bluetooth profiles in general. This has improved the compatibility with Airpods which now allow you to use your mic and control playback using gestures right out of the box.

Sadly, the connection between the two is as finicky as ever and if you have been facing connection issues on Windows 11, then you are not alone. Here’s all you need to know about fixing the Airpods connection issues on Windows 11.

What has changed for Airpods in Windows 11?

The process of switching, however, is still in the testing phase, to say the least with glitches occurring now and then when you need to switch between profiles the most. A good example of this is how the Airpods are used and show up when making video calls on your PC. In our cases, the buds would switch to Mono Audio for mic use and simply refuse to switch back to Stereo audio. The only fix for this was to reconnect, put the buds back in the case and take them out a few seconds later, or to simply keep using Mono Audio in video calls. 

How to fix Airpods connection issues with Windows 11 or 10

1. Connect Airpods again manually

Before we get on to the fixes, we recommend you read more about how you should be reconnecting your Airpods to Windows 11 once you have paired them. As you might have noticed, Airpods now efficiently reconnect to Windows 11 whenever the case is opened, however, this is only until you connect Airpods to another device. Once connected, Airpods will no longer connect with your Windows 11 device even if you have the case open and try to connect manually.

The trick here is that you need to enter pairing mode on your Airpods and then hit ‘Connect’ in the Settings app. Hold down the Setup button at the back of your Airpods with the lid open until you see a flashing white light. This means you have entered the pairing mode and you can now hit ‘Connect’ on your PC.

You won’t have to remove and re-pair Airpods every time on your PC when reconnecting, but you will have to enter pairing mode on Airpods to reconnect. In addition to this, if you do not connect Airpods to another device, then you can simply enjoy an automatic connection when you open the Airpods lid with Bluetooth turned on, on your PC.

2. Re-pair your Airpods

To re-pair your Airpods make sure you have restarted your PC and Bluetooth is turned on, on your PC. Now open the lid of your Airpods case and hold down the ‘Setup’ button at the back until the light starts flashing ‘White’. This means you have entered the pairing mode on your Airpods and you can now use the guide below to pair them with your PC. 

Your buds should now be automatically paired and if everything worked as intended, then you should now be able to use Airpods with your Windows 11 PC without any issues. 

3. Ensure the correct output and input devices have been selected

Let’s ensure that you have the correct output-input devices selected in Windows 11 when you have your AirPods connected to your PC. This is a simple check, but if you use multiple Bluetooth and Audio output devices with your system then this could be an issue for you. 

Similarly, select ‘Airpods’ under your ‘Input’ section if you have multiple Input devices connected to your system. If not, the Airpods mic should be selected by default. 

Now launch the Start menu, search for ‘Control Panel’ and launch the same from your search results.

If Airpods were your default device in all these places then you have passed this check and continue with the guide. However, if Airpods weren’t selected as the default device, then we recommend you do the same and try using your Airpods before proceeding with the guide. 

4. Ensure that Airpods show up in Devices and printers

Despite Microsoft’s numerous efforts, somehow Devices and Printers remains the Settings page where you can properly manage all your connected devices without any issues. A common issue affecting BT devices in Windows 11 is where the devices will show up as connected in the Settings app but won’t be available on the Devices and Printers page. A restart usually fixes this issue but if your Airpods fail to show up indefinitely, then you could be facing driver or pairing issues. We recommend you use the guide below to check for Airpods. 

Launch the Start menu, search for Control Panel, and launch the same from your search results.

Now switch to the ‘Hardware’ tab and check for any conflicting driver. You should see a ‘?’ or a hazard sign beside each conflicting driver.

If you find any such issues then you will have to completely remove Airpods from your system and re-pair your device.

If however, Airpods show up without any driver conflicts then you can use the other fixes in this list to fix your issue. We recommend you try a re-pair nonetheless as it is known to fix most connection issues on Windows 11. 

5. Remove hidden entries

We now recommend you remove any hidden entries for Airpods from the Device Manager. This was a known issue in Windows 10 which still seems to exist in Windows 11. Removing hidden entries should help your OS default to the correctly installed device which should help you get everything back up and running on your system again. Use the guide below to get you started. 

Press Windows + X on your keyboard and select ‘Device Manager’. 

Select ‘Show hidden devices’. 

The selected device will now be uninstalled from your system. Repeat the steps above to remove any other greyed-out devices related to Airpods from your PC. 

As a precaution, look for other Bluetooth devices and adapters on your PC as well especially if you use external Bluetooth adapters. If you find any then repeat the steps above for any Airpods related devices installed on your PC. 

Once removed, restart your system for good measure. You can now try using/reconnecting Airpods again and they should work as intended without any issues. 

6. Remove device completely

If removing hidden entries did not work for you or if you did not find any hidden entries for Airpods, then we now recommend you completely remove and re-pair Airpods on Windows 11. Use the guide below to get you started. 

6.1 Remove from Devices and Printers

Launch the Start menu, search for Control Panel and launch the same from your search results. 

Airpods will now be removed from your device. We now recommend you remove all subsequent Airpods entries from the Device Manager using the guide below. 

6.2 Remove from Device Manager

Let’s remove Airpods from Device Manager on your system. Use the guide below to get you started. 

Press Windows + X on your keyboard and select ‘Device Manager’. 

Select ‘Show hidden devices’. 

Audio inputs and outputs

Sound, Video and Game controllers

Other devices

Xbox 360 Peripherals

Once removed we recommend you move to the next step and restart your PC. 

6.3 Restart your PC

At this point we recommend you restart your PC. This will help remove any cached drivers, refresh and restart BT services as well as clean up all the necessary data from Airpods stored on your PC. Once you have restarted your PC, you can re-pair Airpods using the guide below. 

Bluetooth exploits are quite common nowadays and apple releases multiple firmware updates for all their devices regularly as well. This means that you might be facing a driver and firmware conflict where the current firmware of your Airpods is incompatible with your older Bluetooth driver version.

8. Disable Wireless iAP service

Wireless iAP service allows you to use Voice Commands and speech recognition with Windows 11. However, this uses large amounts of bandwidth and is a known cause of connection issues on Windows 11. If you do not use Voice Commands with your PC then we highly recommend that you disable the Wireless iAP service using the guide below. 

Launch the Start menu and search for the Control Panel to get you started. 

Select ‘Airpods’ and hit Alt + Enter on your keyboard. 

Disable ‘Wireless iAP’ service by unchecking the same.

9. Disable Remote Control

Windows 11 now has native playback support for all Airpods gestures and this is great news. In our initial testing, we were able to control playback in all popular web apps for media consumption like YouTube, Twitch, Discord, and more. The controls also worked well with native apps for Spotify, Apple Music, Deezer, and more. However, these playback controls run a Remote connection service that causes connection issues on Windows 11 especially if you own Airpods (Gen 1) or Airpods (Gen 2). Use the guide below to disable these services and fix connection issues on your system. 

Note: Needless to say, you will lose out on the ability to use playback gestures with Windows 11. 

Launch the Start menu, search for ‘Control Panel’, and launch the same from your Search Results. 

Now select Airpods and hit Alt + Enter on your keyboard. 

Now uncheck the boxes for the following services. 

Remote Control

Remotely Controllable Device

We now recommend you restart your PC just to be safe and test your Airpods again. If everything went correctly, then you should no longer face connection issues with Airpods on your Windows 11 PC. 

11. Disable Telephony Service (if you want Audio Output only)

Launch the Start menu, search for ‘Control Panel’ and launch the same from your Search results. 

Uncheck the box for ‘Handsfree Telephony’. 

The audio should now automatically switch and start using the Stereo audio which should help you get high-quality audio when using Airpods. 

12. Disable Absolute Volume

If you are facing low-volume issues or intermittent connection when using Airpods, then we recommend you disable Absolute Volume for BT devices on your system. This setting helps with proper control of the volume for BT audio devices remotely on modern devices but it causes issues with certain unique devices that use different or older protocols much like the Airpods. Disabling Absolute Volume should help solve connection and volume issues on your system. Here’s how you can disable it on your system. 

Press Windows + R on your keyboard, type in the following, and hit Enter. 


Locate the following location in the registry editor. You can also copy-paste the path given below in your address bar at the top. 


Set the ‘Value data’ as ‘1’. 

Absolute Volume is now disabled on your system and we now recommend you restart your system at the earliest. You can then re-pair Airpods with Windows 11 and you should no longer face connection issues on your system.

2. Reset your Airpods

This can be inconvenient as you will have to re-pair your Airpods with every device you own however, this is a known fix for most issues that you might be having with Audio or Connection on Windows. Resetting your Airpods will allow you to start afresh and pairing them first with Windows should help get everything working as intended. Use the guide below to reset your pair and then connect it to Windows using the guide above. 

Note: Make sure you remove Airpods from your PC as a device. We recommend you use the guides in this post to remove it from the Control Panel first and then subsequently from the Device Manager (if it shows up).

Resetting Airpods is a fairly simple process, place your Airpods in the case and leave it alone for a few minutes. Now come back, open the lid and hold down the Setup button at the back of your Airpods for around 15 seconds. You should then see the light flash Amber and then white. Now close the lid, enter pairing mode and try connecting them to your Windows 11 PC as a fresh device. If everything goes correctly, you should have audio and connection working on your device. You can now use the guide above to configure your Airpods as intended.   

If you’re still facing Connection issues with Airpods then it’s time we try some troubleshooting. We first recommend you perform the checks below to ensure that everything has been set up properly on your system. 

Note: We recommend you have your Airpods connected and paired to your PC to perform these troubleshooting fixes as intended. 

Facing issues in Video calls? Here’s all you need to know

This is quite finicky and depends on your BT driver version and whether you are using Windows 11 or Windows 10. If you are using Windows 10 then Airpods will show up as two different devices, one called ‘Airpods hands-free’ and the other called ‘Airpods stereo’. If you have the latest PC compatible with Windows 11 running the same, then in most cases Airpods will now show up as one device with smart switching already enabled. However, if you have an older BT adapter or older BT drivers then it will indeed show up as two devices on your system as well. 

The trick here is to select ‘Airpods hands-free calling’ when trying to use Airpods in video conferencing apps if you have two devices. If you have one, then you re-enable the Telephony service if you had disabled it earlier. Subsequently, you will have to increase your Mic levels to get manageable audio quality on your system. We tested the following video conferencing apps with Airpods (Gen 1) and here’s how the experience went. 

We tested Google Meet first where Airpods showed up as three different devices, for both audio and video. Selecting either did absolutely nothing. The audio output and input defaulted to the right earbud and no amount of tinkering got either the input or output to switch over. 

We then tested Microsoft Teams and things were similarly disappointing. Teams does a great job of automatically switching between stereo and mono audio on its own when you speak or listen, that is until it doesn’t happen too often. The mic then simply stops working and toggling the Mute button does seem to fix this after the first or second try. In the worst cases, you will have to put the buds back in the case, wait a few seconds, and wear them again to get everything working. This doesn’t sound bad, but if you’re having to do this every 10 minutes then the Airpods aren’t simply worth using. It would be better to have a single bud that works flawlessly than having two buds that rarely work. We’re sure that this is fairly new and Microsoft is looking to improve this over time.

Summer Instagram Captions To Try This Season

The sun is out, the weather is warm, and vacation days are here—it’s time for new Instagram captions.

As more people opt to spend time outside and away from their phones, attention-grabbing social copy is more important than ever. On Instagram, that means appealing to what’s relevant to your audience and following the latest trends.

Whether you’re looking for something humorous or heartfelt, we’ve got you covered.

Summer Instagram caption dos and don’ts

Before we dive into summer-specific captions, let’s walk through some do’s and don’ts for your Instagram.

Do use hashtags

Because Instagram users can follow hashtags like they do people, hashtags help people find your Instagram content and see them in search results. Use hashtags to reach a larger audience and increase your engagement with new followers.

Professional copywriter Dylan Miller says, “Think of hashtags more like communities than attraction channels. If someone is searching a particular hashtag or it is showing up a lot on their feed, then it probably has some meaning to them. So tap into that meaning and use that hashtag as if you were chiming into a Discord or Slack channel.”

Do describe what’s happening in the post

Whether you post a photo, carousel, or video, use the caption to describe what’s happening and why you’re sharing it. Even if you opt for something witty and playful, ensure your Instagram caption is relevant to your post.

For longer captions, Dylan suggests having a great heading and intro line above the fold in case users don’t tap “Read more.”

Do stay positive Do use emojis

Emojis inject humor into your caption and set your caption apart from other text-only blurbs. But don’t overdo it—too many emojis can appear spammy.

Do focus on your audience

Focus your Instagram caption on how your audiences can benefit from your post rather than what you’ve done to create it. Instead of “Buy our products!” try “Here’s a photo of our favorite products at the beach. What are your summer go-to’s?”

Take a look at this example post by Sephora talking about makeup essentials for summer travels. They end their caption by asking their readers, “What destination are you packing these for? ⛱️” to incite engagement and make their followers feel involved.


The more you know about your followers and their interests, the better able you’ll be to craft captions that resonate with them.

Copywriter and thought leadership strategist Lindsey Tague agrees: “Find emotional appeal in what you are sharing, and always ask yourself what the audience wants and why this matters to them when deciding what to share.”

Don’t be too ‘salesy’

Ideally, your Instagram can help your business make money; it’s only natural to desire that. However, if you’re properly focused on your audience, you’ll understand that ‘salesy’ content is the last thing your followers will want to see.

Instead, offer interesting, exciting, and useful content, some of which feature your products. Focus on building trust and adding value—not making sales. Over time, this approach will (ironically) be more effective in converting customers than ‘salesy’ content could ever be.

Don’t use hashtags excessively

While hashtags have immense value, Instagram’s creator account warns against using too many hashtags and suggests sticking to three to five hashtags per post.

Lindsey also encourages, “You want to choose common hashtags that your target audience might be following. Do some research, and don’t use ones with hundreds of thousands of tags.”


Don’t be impersonal

Your Instagram captions should be personal and authentic. Don’t use stock copy or “copy and paste” captions from other accounts. Your followers want to hear from you!

Consider your social media marketing like a water cooler—initiate conversations, share stories, and post thought-provoking ideas.

46 summer Instagram captions

Summer is the best time to be outdoors and enjoy the beauty of nature—and that’s what your customers will likely be doing.

Keeping this in mind, here are some captions to help you create beautiful summer Instagram posts that reflect your brand and engage your audience. (We’ve also woven in a handful of Instagram captions from real brands for some summer inspiration.)

Summer Instagram captions for product launches

Launching a new product or service this season? These summer Instagram captions will help you promote your business in style.

What new product are you planning on treating yourself to? Grab them (before we do!!!)


2. It’s hot outside, but we’re still making progress on our big news to help you get into the sunshine state of mind. Follow us today to stay up-to-date!


4. Summer is the best time to try something new, and we are so excited about our product launch tomorrow! You don’t want to miss it!

☀️ Which one is calling to you now?


Don’t miss it 👀

Related: Get summer marketing ideas to boost your business all season.

Summer Instagram captions for discounts and sales

Running summer promotions? Then you need to spread the word on Instagram! Use these captions to get started!

7. ☀️ SUMMER SALE: We are now offering 50% off sitewide! Don’t miss our amazing deals! ⁠

8. It’s time to get wild this summer with the latest styles on sale at your favorite stores!

9. Summer sales are the best! If you see it in the store, it’s on sale now. Today only! Have a look and see what you like. Once it’s gone, it’s gone forever. Shop online today and save up to 70% off your favorite brands. 🎉

10. It’s time to celebrate summer with a sale on our favorite items! Save 20% off select styles with code SUMMER20.


11. Get ready for summer with our Summer Sale! Get 20% off on everything! Hurry!

12. We’ve got a summer treat for you 🍬 Stop in for 25% off your purchase 🎉

13. Beat the heat with us 🥵 Come in, cool off, and SAVE with 30% TODAY ONLY 😎

Summer Instagram captions for food and drink-related posts

14. Beach days, sandy toes, BBQs, and pool parties are here! Get ready for the most epic summer with our new collection!

15. Some summer-loving and freshly squeezed lemonade on a hot summer day.

16. A good picnic by the lake, soaking in vitamin sea is like paradise on earth 🌊

17. Summer wine is so refreshing. 🍷

18. I love chocolate-covered 🍓🍓🍓 in the summertime.

19. Nothing pairs better with a glass of wine than sunshine, beach hair, and friends.


20. This summer, I’m on a diet…of ice cream. 🍦

21. Summer is all about good vibes, good friends, and good food!

22. You can’t beat the heat without ice cream.

23. Life’s too short not to be eating ice cream and livin’ it up this summer!

24. This heat is unbearable! I need a break from this weather, but I don’t want to stop eating ice cream!

25. When life gives you sunshine, make lemonade! 🍋

26. Our patio is the perfect spot to cool off 🧊

Related: Get summer slogans to add to your Insta captions this season.

Summer Instagram captions for summer parties, beach, and pool days

Who doesn’t love a pool or beach day? (We know we don’t!) Try these Instagram captions to get in the summer spirit.

27. Let’s celebrate summer in flip-flops by the beach with friends, food, and fun! 🌊

28. Summer nights are made for dancing under the moonlight with someone you love.

29. Here’s to another summer full of sun-kissed skin and good friends!

30. We’re ready for a little R&R on this sunny Saturday afternoon! What are you up to?

32. Fake it ’till you make it with these products that mimic sun-kissed skin ☀️


33. Summer is here and so are my tan lines.

34. Here comes the sun, and with it comes the swimsuit season! Time to take a selfie with my resting beach face!

35. We’re summer lovin’ this weather ☀️

36. Rain, rain, go away 🌧️ We want a beach day today 🏝️

37. Dreaming of the beach 😴🏝️

38. As Sheryl Crow says…I wanna soak up the sun ☀️

Summer Instagram captions with inspirational quotes

Quotes are a great caption go-to. We rounded up some summer quotes you can use on Instagram this season.

39. “It was June, and the world smelled of roses. The sunshine was like powdered gold over the grassy hillside.” – Maud Hart Lovelace, Betsy-Tacy and Tib

40. “The clearest summer could end in a downpour. Could end in lightning and thunder.” – Benjamin Alire Sáenz, Aristotle and Dante Discover the Secrets of the Universe

41. “Summer afternoon – summer afternoon; to me, those have always been the two most beautiful words in the English language.” – Henry James

42. “Green was the silence, wet was the light, the month of June trembled like a butterfly.” – Pablo Neruda, 100 Love Sonnets

43. “O, Sunlight! The most precious gold to be found on Earth.” – Roman Payne


44. “And so with the sunshine and the great bursts of leaves growing on trees, just as things grow in fast movies, I had that familiar conviction that life was beginning over again with the summer.” – F. Scott Fitzgerald

45. “When all else fails, take a vacation.” – Betty Williams

46. “Summer means happy times and good sunshine.” – Brian Williams

Make those summer Instagram captions shine

We hope these summer Instagram captions and Instagram best practices have given you plenty of ideas for your own channel.

Whether you’re showcasing your latest products or simply reflecting on the hot days of summer, these summer Instagram captions are a great way to engage your followers and help them enjoy the sunshine.

Looking for more seasonal Instagram caption ideas? We’ve got you covered:

Allie Decker

Allie Decker is a Senior Content Marketing Manager at Shopify and Head of Content at Omniscient Digital. When she’s not writing, you can find her reading, traveling, playing the piano, or rewatching Schitt’s Creek.

Other posts by Allie Decker

Fixblue Screen On Windows 11/10

If you get the Blue Screen error on Windows 11/10 saying that iaStorAVC.sys failed, here are some tips to help you get rid of this issue. You need to follow all of them one after one to troubleshoot this BSOD, which is related to Intel Rapid Storage Technology.

Fix chúng tôi failed Blue Screen on Windows 11/10

To fix chúng tôi Blue Screen on Windows 11/10, follow these steps:

Install or update IRST driver

Remove and reinstall IRST driver

Restart Intel Rapid Storage Technology service

Enable AHCI

To learn more about these steps, continue reading.

1] Install or update IRST driver

If you are using an Intel chipset, it is recommended to install the Intel Rapid Storage Technology driver on your computer. It helps you establish a connection between your chipset and hard drive, which is one of the most important components. Although modern-day computers may not need this driver, it is highly recommended to install the driver on your PC. However, if you have already installed it a long time back, it is suggested to check for updates. If you recently installed a Windows Update, and the system broke after that, you can search for pending updates and install them accordingly.

You may use download, install, and update Intel Drivers with Intel Driver & Support Assistant.

2] Remove and reinstall IRST driver

As this Blue Screen error occurs mainly for the Intel Rapid Storage Technology driver, it is recommended to remove it once. If an internal conflict is blocking your system from running the IRST driver on your PC, you won’t be able to use your PC without any error.

That is why you can remove the IRST driver from your PC using the Device Manager. For that, do the following:

Press Win+X to open WinX menu.

Select Device Manager.

Expand the Disk drives section.

Confirm the change.

Insert the motherboard installation media.

Install the Intel Rapid Storage Technology driver.

After that, you should not have any problems.

3] Restart Intel Rapid Storage Technology service

To run the IRST on your PC, a service runs in the background. It is called the Intel Rapid Storage Technology service. If it is stopped due to any reason, there is a chance of getting such an error. Therefore, follow these steps to verify if the service is running or not:

Select Automatic from the drop-down list.

4] Enable AHCI

If you have an old PC, you may get this problem due to not having the AHCI enabled. In that case, you can follow this guide to enable AHCI in Windows after installation to get rid of this problem.

Related: Intel Rapid Storage Technology Service not working

How do I fix iaStorA.sys?

It is pretty straightforward to fix the chúng tôi BSOD error on Windows 11 and Windows 10. You can fix it by updating the Intel Rapid Storage Technology driver or Intel SATA/AHCI driver. However, if that doesn’t work, you can fix it by removing and reinstalling the same driver. For your information, you can do it with the help of the Device Manager.

How do I change my chúng tôi driver?

It is not possible to change the Intel Rapid Storage Technology driver on Windows 11/10 if you are using an Intel chipset. However, it is possible to update the driver if an update is pending. In that case, you need to download the update from the official manufacturer’s website. However, if you haven’t installed the driver, you need to find it on the CD given to you while purchasing the chipset.

That’s all! Hope this guide helped.

Read: Fix High CPU usage by IAStorDataSvc on Windows.

Virtualbox Windows 11: This Pc Doesn’t Meet The Requirements

Windows 11 has raised the bar for minimum system requirements compared to its predecessor, Windows 10. This has led to many users encountering the error message “This PC can’t run Windows 11 – This PC doesn’t meet the minimum system requirements to install this version of Windows” when trying to install it on a virtual machine (VM) using VirtualBox or other VM software such as VMware. In this comprehensive guide, we will delve deeper into the issue and provide an effective solution to bypass the requirement check.

Also see: We couldn’t install Windows 11: Safe_OS with boot operation

Before we proceed with the solution, it’s essential to understand the minimum system requirements for Windows 11. These requirements ensure that your system can run the new OS smoothly and securely. The minimum system requirements include:

A compatible 64-bit processor with at least 1 GHz clock speed and 2 or more cores

4 GB of RAM or more

64 GB of storage or more

DirectX 12 compatible graphics with a WDDM 2.0 driver

A display with at least 720p resolution and 9″ or larger diagonal screen size

UEFI firmware with Secure Boot capability

TPM version 2.0

While these requirements may seem demanding, they serve to provide an optimal user experience with Windows 11. However, they can cause problems when trying to install the OS on a virtual machine using software like VirtualBox or VMware.

Recommended guide: How to Install Windows 11/10 with Digital License from USB

The solution we provide in this guide allows you to bypass the minimum system requirements check by creating registry values in the Windows Registry Editor. This method is particularly useful for testing and evaluation purposes. However, it is essential to note that using this method may result in a suboptimal experience, and it may not be suitable for production environments.

Follow the steps below to bypass the system requirements check:

Step 1: Access the Command Prompt on the Windows installation screen

When you encounter the error message, press Win + X on your keyboard. This key combination will open the command prompt, allowing you to access the Registry Editor.

Step 2: Open the Registry Editor

In the command prompt, type regedit and press Enter. The Registry Editor will open, allowing you to modify the registry values.

Step 3: Navigate to the Setup key

Using the left pane of the Registry Editor, navigate to the following location:

ComputerHKEY_LOCAL_MACHINESYSTEMSetup Step 4: Create the LabConfig key Step 5: Create the BypassCPUCheck DWORD value Step 6: Create additional bypass values

Following the same process as in Step 5, create the following DWORD (32-bit) Values:




Step 7: Close the Registry Editor and Command Prompt

You can now proceed with the Windows 11 installation without encountering the error message. The registry values you created will bypass the system requirements check, allowing you to install Windows 11 on your VM via VirtualBox or other VM software.

Related resource: How to Open VMDK File in Windows 11

While the method described above can help bypass the minimum system requirements check for Windows 11, it is crucial to understand the potential risks and limitations associated with this approach:

Performance Issues: Bypassing the minimum system requirements may lead to performance issues when running Windows 11 on your VM. The OS may run slower or encounter problems when using specific features or applications.

Security Vulnerabilities: Some of the minimum system requirements, such as TPM and Secure Boot, are designed to enhance security. Bypassing these checks may expose your VM to potential security risks.

Limited Support: As this method is not officially supported by Microsoft, you may not receive assistance or updates if you encounter issues while running Windows 11 on your VM.

Please consider these risks and limitations before deciding to bypass the minimum system requirements for Windows 11.

Linked issue: This host supports Intel VT-x, but Intel VT-x is disabled

Windows 11 has introduced higher minimum system requirements to ensure an optimal user experience. However, these requirements can cause issues for users who wish to install the OS on a virtual machine using VM software such as VirtualBox or VMware. By following the steps outlined in this guide, you can bypass the system requirements check and install Windows 11 on your VM. Remember that this method is intended for testing and evaluation purposes and may result in a suboptimal experience or potential security risks. Always consider the potential risks and limitations before proceeding with this approach.

Update the detailed information about Windows 10/11 Updates Ignore Active Hours? Try This on the website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!