Trending February 2024 # Volume Or Sound Not Working On Mac? 11 Fixes To Try # Suggested March 2024 # Top 10 Popular

You are reading the article Volume Or Sound Not Working On Mac? 11 Fixes To Try updated in February 2024 on the website We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested March 2024 Volume Or Sound Not Working On Mac? 11 Fixes To Try

For the most part, macOS is a well-behaved operating system that rarely experiences irritating day-to-day glitches, but now and then, you may find that your volume controls or even your sound output as a whole aren’t working correctly.

There are several reasons why this may happen. We’ll walk you through both rare and common Mac sound issues to help you fix the problem.

Table of Contents

1. Check The Mute Button!

If you’re using an Apple keyboard, then the F10 key doubles as the audio mute toggle. It’s far too easy to accidentally tap this button, or have your cat “accidentally” step on it when you aren’t looking. So give the F10 key a press to see if it unmutes your sound.

2. Restart Your Mac

One of the first things you should try is restarting your Mac. In our experience, a simple reboot resolves most sound glitches in macOS. Just ensure all of your audio equipment is connected before restarting the computer. Sometimes connecting audio devices after the computer has already started is the cause of the issue. So hook it all up before you see the Apple logo.

3. Check Your Hardware

Sometimes the problem is that you’ve simply hooked something up incorrectly. Make sure that you haven’t, for example, plugged your speakers into an input instead of an output. If you’re using a Bluetooth audio device, try resetting it to factory defaults and pairing it with your Mac again.

Here are some general things to check:

    Make sure that your Mac speakers or headphones are properly plugged in.

    Check your speakers’ or headphones’ audio output volume slider to ensure they are turned up.

    Check the volume slider on your Mac to ensure that the volume level is turned up and the mute button is not enabled.

    If you are using external speakers or headphones, try using the internal speakers (for MacBooks or iMacs or other Macs with built-in speakers) to see if the issue is with the external device.

    Check for any visible damage to the headphone jack or audio port on your Mac and the speakers or headphones themselves.

    If you suspect any specific piece of gear is to blame, try it with another device if possible to eliminate it as a suspect.

    4. Check Your Sound Settings

    With your physical hardware inspected and in working order, the next troubleshooting step is ensuring your sound settings are correct.

    To check your sound settings on a Mac, follow these steps:

      In the

      System Preferences/Settings window

      , select



        Under the

        Output tab

        , make sure that the

        correct device

        is selected as the output device. For example, you may have an HDMI device without speakers selected.

          Under the

          Input tab

          , make sure that the

          correct device

          is selected as the input device.

            Under the

            Sound Effects tab

            , make sure that the

            Play sound effects through

            option is set to the correct device.

            Also, be sure to check that the volume slider isn’t muted.

            If everything here looks correct, it’s time to move on to more sophisticated fixes.

            5. Reset the NVRAM (Intel Macs) or PRAM (Apple Silicon Macs)

            NVRAM (Non-Volatile Random-Access Memory) or PRAM (Parameter RAM) are types of memory that store certain settings and information that your Mac uses to access certain features. If you’re experiencing an issue with volume or sound on your Mac, you may want to try resetting them, as this can sometimes help to resolve the issue.

            Check out How To Reset PRAM & SMC On Your Mac for more information on how to perform the reset.

            6. Check for Software Updates

            If volume or sound is not working on your Mac, checking for any available software updates is a good idea. Outdated software can sometimes cause issues, and installing the latest version of macOS can help to resolve these issues.

            If no updates are available or the issue persists after updating, try the next fix on the list. You can also use the terminal to perform updates manually.

            7. Try a Different User Account

            If volume or sound is not working on your Mac, you may want to try logging in to a different user account to see if the issue persists. This can help to determine if the issue is specific to your user account or if it is a system-wide issue.

            If the issue does not persist when logged in to a different user account, it is likely that the issue is specific to your user account and can be resolved by deleting or troubleshooting your account settings. If the issue persists when logged in to a different user account, it’s probably a system-wide issue requiring further troubleshooting.

            8. Repair Disk Permissions

            If you’re experiencing an issue with volume or sound on your Mac, you may want to try repairing the disk permissions on your Mac. Disk permissions are a set of rules that determine which users and processes are allowed to access certain files and folders on your Mac. If the permissions are incorrect, it can cause issues with your Mac.

            To learn how to repair disk permissions, check out How to Fix or Repair Disk Permissions in macOS.

            9. Try Safe Mode

            You may want to try starting your Mac in Safe Mode. Safe Mode is a special boot mode that allows you to troubleshoot and fix issues with your Mac by starting up with a minimal set of drivers and programs.

            For instructions on how to boot into Safe Mode in macOS, check out How to Boot Up and Use a Mac in Safe Mode

            If the issue goes away in Safe Mode, it’s a good bet that the problem is with a third-party application, not macOS.

            10. Check for Third-Party Software Conflicts

            If the problem isn’t present in Safe Mode, it’s a good idea to check for any conflicts with third-party software that you have installed. Third-party software can sometimes interfere with the normal functioning of your Mac and cause issues like this.

            If the problem is present right from the moment you boot up your Mac, it’s likely one of your startup programs. Check out How to Enable or Disable Startup Programs on macOS to see how you can selectively disable programs until you find the one causing the issue.

            11. Reset the System Management Controller (SMC)

            The System Management Controller (SMC) is a chip in your Mac that controls power to certain hardware components. If you’re experiencing an issue with volume or sound on your Mac, you may want to try resetting the SMC, as this can sometimes help to resolve the issue.

            Check out How To Reset PRAM & SMC On Your Mac for more information on how to perform the reset. If the issue persists after resetting the SMC, you may want to consider looking for further assistance from a technical support specialist.

            Further Troubleshooting Steps

            The above fixes represent the most straightforward troubleshooting path for this particular problem, but if you still don’t have working sound, there are a few miscellaneous things you can try,

            The Apple Hardware Diagnostic

            Check for any hardware issues by running Apple Hardware Test or Apple Diagnostics. To do this, shut down your Mac and press the power button to turn it back on. Immediately press and hold the D key on your keyboard. Release the key when you see the login window. Apple Hardware Test or Apple Diagnostics will start automatically. Follow the prompts to complete the test.

            On Apple Silicon Macs, the new method is to press and hold the power button from a power off state until you see a list of start options. Then press Command + D to start the diagnostic tool.

            Using Disk Utility To Check for Errors and Corruption

            Check for any corrupt system files by running a Safe Boot and using Disk Utility to repair the hard drive. To do this, start your Mac in Safe Mode and then run Disk Utility as described above.

            Thunderbolt and USB Audio Devices

            If you’re using a Thunderbolt or USB audio device, try unplugging it and then plugging it back in to see if this resolves the issue.

            Malware and Viruses

            If you suspect that malware may be causing the issue, you may want to try running a malware scan on your Mac using an antivirus program.

            Restarting Core Audio

            If you’re experiencing an issue with coreaudiod, the core audio process that handles the sound controller, you may want to try restarting the process.

            You can restart the Core Audio component by pasting the command below in Terminal and pressing Enter.

            sudo killall coreaudiod

            You're reading Volume Or Sound Not Working On Mac? 11 Fixes To Try

            Youtube Not Working? Here Are Quick Fixes To Try

            Have you ever tried watching YouTube videos only to find that the loading icon just keeps circling, or the video is entirely blank?

            What are the reasons for YouTube not working? In this article we’ll explore over 15 things you can try when you find that YouTube just isn’t working right. At least one of these tips should fix your issue.

            Table of Contents

            Is YouTube Down?

            If you can’t even get to the YouTube website, there could be a potential problem with the site itself.

            This is always the first thing you should check. Because if there is a problem with YouTube, it’s likely impacting many thousands of users across the globe. The best two sites to check for this is Downdetector or Outage.Report.

            On Downdetector, you’ll see a graph showing the number of users who’ve had YouTube problems in the last 24 hours. There’s also a I have a problem with Youtube button you can use to report your issue.

            Is YouTube Having Technical Issues?

            The next thing to check is, even though you can access YouTube, is the site having internal technical issues? This happens more often than people think.

            Some issues that can represent internal technical issues:

            Specific buttons not working.

            Menus behaving strangely.

            Video control buttons not working right.

            White or black video when you press the play button.

            The Youtube Help page is the place to go to search for the specific issue you’re seeing. 

            You may find that other users have had the same issues in the past, and you can learn from the solutions within the community.

            You could also discover that the issue is an internal YouTube technical glitch, and all you need to do is wait.

            Are YouTube Ads Causing The Problem?

            Another common issue that can happen when you try to play YouTube videos is that the video won’t play. Or it’ll play after multiple attempts and then stop playing again.

            To fix this issue with YouTube not working:

            Open chúng tôi in your browser and make sure you’re signed into the same Google account you’re using on YouTube.

            Select the Google profile icon at the upper right and select Manage your Google Account.

            Select Data & personalization from the left menu.

            Scroll down to Ad personalization and select Go to ad settings.

            Make sure that the toggle for Ad personalization is ON is enabled.

            Is It a Private Video?

            If you’re trying to view a private video, you’ll need to make sure that you’ve been invited to view the video before you can play it.

            Make sure the person who created the private video knows how to change the video privacy settings. 

            To be able to view private videos you’ve been invited to view:

            You need to have your own YouTube account and be signed into it.

            If you have multiple YouTube accounts, make sure you’re signed into the one the video was shared with.

            You need a direct link to the private video once it’s been shared with you.

            Update YouTube App On Mobile Devices

            If YouTube videos aren’t working on your mobile phone, you may need to update the YouTube app. This is because some updates may break old versions of YouTube on mobile devices where the app hasn’t been updated yet.

            Updating the app can resolve those issues.

            To do this on Android:

            Open the Google Play Store app.

            Tap the menu icon and select My apps & games.

            Tap Update to the right of the YouTube app.

            To update the YouTube app on iOS devices:

            Open the App Store app on your phone.

            At the bottom of the screen, select Updates.

            Next to the YouTube logo in the list, select Update to update the app.

            Once the YouTube app is updated, restart your mobile device. Then reopen the app and try viewing the YouTube video again.

            Make Sure The Browser Isn’t Causing Problems

            If you’re using Chrome to view YouTube videos, there are a number of Chrome settings that could cause YouTube to stop working.

            Try all of the following fixes on the Chrome browser to fix the issue.

            Clear Cookies and Cache

            Clearing all cookies and cache in Chrome often fixes numerous YouTube issues.

            To do this:

            Select the three dots in the upper right corner of the Chrome browser to open the menu.

            Select More tools from the menu.

            Select Clear browsing data.

            In the Clear browsing data window, make sure Cookies and other site data and Cached images and files are both selected, and select Clear data.

            Update Chrome

            Sometimes, recent Chrome updates can lead to older versions of Chrome having issues playing YouTube videos. You can resolve this by updating your version of Chrome to the most recent version.

            To do this:

            Select the three dots in the upper right corner of the Chrome browser to open the menu.

            Select Help and select About Google Chrome.

            On the About Chrome page, Google will check that you have the latest version. If you don’t, the update will take place automatically.

            Check Proxy Settings

            Sometimes, malicious apps or browser extensions may update your proxy settings and cause issues with using YouTube. 

            To set your Chrome proxy settings back to default:

            Type chrome://settings/system in the browser URL field.

            Select Open your computer’s proxy settings.

            In the proxy settings window, make sure Use a proxy server under Manual proxy setup is set to Off, and that Automatically detect settings under Automatic proxy setup is set to On. 

            If you’re using a browser on a company network that uses manual proxy settings, reach out to your IT department to find out what those are and get help setting them back to the correct settings.

            Enable Javascript

            YouTube needs Javascript enabled in your Chrome browser in order to work properly. 

            To do this:

            Select the three dots in the upper right corner of the Chrome browser and select Settings.

            Scroll down to the Privacy and Security section and select Site Settings.

            Scroll down to JavaScript. 

            If the status isn’t currently “Allowed”, select it and enable the toggle to the right of Allowed.

            Disable Ad Blocker and Use Different Browser

            Ad blockers usually don’t cause any problems in YouTube, but depending on what ad blocker you are using and what settings you have enabled in your ad blocker, it’s worth trying to disable to make sure that’s not causing the problem.

            In addition to ad blockers, other plugins like Disconnect, Privacy Badger, ScriptSafe, etc. can block certain elements on YouTube that may prevent the videos from playing.

            Lastly, if you’re using a browser like Brave, it has some very strict default privacy features that could be causing issues with YouTube. Try a different browser and see if that fixes the issue. If it does, try disabling all add-ons and any browser privacy features.

            Check Your Internet Connection

            It seems obvious, but many people don’t realize that YouTube isn’t working because they’ve lost their internet connection.

            If your internet connection is bad, you’ll need to troubleshoot the internet connection before you can test YouTube again.

            A couple of quick fixes that can get your internet working properly again is to flush your DNS settings, and reset your network settings. 

            Update Graphics Driver

            If you’re seeing a black, white, or green screen when trying to play YouTube videos, the issue could be your graphics driver.

            A quick fix for this is making sure you have the latest driver for your graphics card.

            Restart your computer once drivers are updated.

            Disable Hardware Acceleration

            For the best quality video while watching YouTube, enabling hardware acceleration is a good option. However, on older computers it can cause performance problems.

            To see if this is the issue, try disabling hardware acceleration.

            Type chrome://settings/system in the browser URL field.

            Disable the toggle to the right of Use hardware acceleration when available.

            Select Relaunch to relaunch Chrome.

            Sync Time, Date, And Region

            One odd behavior not many people think about is what happens when your time zone is incorrectly set on your computer. This can lead to YouTube videos not working properly, and may just show the loading sign constantly.

            You can quickly check this setting to make sure it’s not causing the problem.

            On a Mac:

            Open System Preferences

            Select Date & time

            Under time Zone, select Set time zone automatically using current location

            Restart your system for your time and timezone to get updated automatically by your system.

            Uninstall Conflicting Apps

            Sometimes, malicious apps you recently installed can cause issues with playing YouTube videos. Uninstalling those apps will often resolve the issue with YouTube not working.

            You can check for apps you’ve recently installed and uninstall them.

            Select the Start menu, type run, and select the Run app.

            Type chúng tôi and press Enter.

            Select the Installed On header to sort apps in order of the ones most recently installed.

            Select any apps you’ve installed that might be causing an issue and select Uninstall at the top to uninstall that app.

            Also have Chrome search for and clean up any harmful software on your system.

            To do this:

            Open Chrome, type chrome://settings/cleanup in the browser URL field, and press Enter.

            In this window, select the Find button to have Chrome scan for harmful apps and remove them.

            The scan only takes a few minutes, but it’s worth doing to make sure there isn’t any harmful software on your system that could be causing conflicts with playing YouTube videos.

            Other Fixes When YouTube Is Not Working

            If all else fails, the YouTube video you’re trying to view may be restricted in your region.

            A good workaround for this is to try using a VPN service to access the YouTube video you want to watch. This “tricks” YouTube into thinking you’re connecting from a different country, which may allow you to view the video.

            Another fix that has worked for different people is making sure you have the latest Windows updates installed on your system. It’s a good idea to enable automatic updates so this doesn’t cause a problem with viewing YouTube videos. 

            Is Your Wireless Mouse Not Working? Try These Fixes

            A Wireless mouse is a little more complex than a standard mouse that plugs into the computer. Since they require a wireless connection, they’re prone to interference and USB dongle problems.

            The problem with your wireless mouse may not be apparent at first glance, but a little investigation will help identify it so you can solve it. 

            Why is My Wireless Mouse Not Working

            Most problems with wireless mice have to do with the method you use to connect them to the computer. Unfortunately, something as simple as a loosely-inserted USB dongle can keep the computer from recognizing the mouse.

            Even if the connection is made, specific problems might prevent it from holding the connection. On top of that, issues with the mouse itself can keep it from working even if the wireless connection is stable. 

            How to Fix Wireless Mouse not Working

            Approach troubleshooting your mouse from a logical perspective to make it as simple as possible. For example, if the mouse can move on the screen, the connection is probably working, and one of the keys on the mouse might be broken. If it works in one program and not another, check program settings before troubleshooting the mouse. 

            Of course, the source of the problem can always be something you don’t expect. But using a logical progression to pinpoint it can help save you some time along the way. 

            Interference Issues

            Certain surfaces can cause wireless signal interference. The connection between your mouse and the computer is weakened or prevented by some problem. There are a few different sources of interference to consider.

            Distance is a significant source of interference. If you try to use the mouse too far from the computer, the wireless connection simply won’t happen. While some mice can operate with 30 feet between the device and the computer, that distance is often shortened by other sources of interference.

            Physical barriers are another significant source of interference. Walls, metal surfaces, and other impediments can keep the signal from reaching your computer. If you have a large metal desk that you keep the computer under, that metal might be the reason why the mouse isn’t connecting to the computer.

            Interference also comes from overcrowded wireless bands. Most devices, including mice, still operate on the 2.4 GHz band, even though 5 GHz and 6GHz bands are becoming increasingly popular.

            Even household devices with wireless connectivity can use the 2.4 GHz band; some refrigerators connect to grocery shopping apps or Twitter, for example. The more of these devices you have, the more difficult it is for a mouse on the same band to have a clear connection.

            To determine whether interference is the source of your wireless mouse woes, try to eliminate as many of them as possible. 

            Place the computer on a solid flat surface with space for your mousepad. 

            Turn off all other wireless devices in the area and those that work on the same band as your mouse. 

            Plug the USB dongle into the computer.

            Turn the computer on.

            Turn the mouse on.

            Attempt to use the mouse on the computer. If it’s working now when it wasn’t before, try it with different placement in your usual setup.

            Unfortunately, problems with interference might require you to move your entire computing setup. There isn’t much you can do to mitigate the problem if that’s the root of your wireless mouse issues because the signal must reach the computer.

            Experiment with different positioning until you find something that suits your space and still works with your mouse. If there aren’t too many wireless devices, the distance is close, and the barriers have been resolved, it’s probably another issue. 

            Connection Problems

            Connection problems can also come from an improperly connected dongle or mouse set incorrectly. You’d be surprised how often people forget they have to turn on their wireless mice! Check the mouse itself and the dongle that you put into the computer to make sure they’re ready to work. 

            Flip your mouse over and make sure it’s switched on.

            Remove the dongle from the computer.

            Shut down the computer.

            Plug the dongle into a working USB slot.

            Restart the computer.

            Try to use the mouse again.

            You want to double-check that you’re seating the USB dongle firmly in the computer’s USB slot. A weak or shaky dongle can prevent your wireless mouse from working. Don’t shove it in hard, but do make sure it’s inserted before attempting to use your mouse. 

            Power and Charge

            Another issue that wireless mice experience is power and charge issues. Different brands use different power sources, but all wireless mice are rechargeable or run on batteries. If your battery charge is low, it might keep the mouse from working.

            Don’t just grab batteries from a nearby remote and switch them into your mouse. Some devices can run on low battery power and still work even if the battery charge won’t give you the best performance in another machine. The best thing to do is replace the batteries with fresh ones to test whether that’s the issue.

            If your wireless mouse is rechargeable, turn it off and place the charger in the port. Wait until it gets to 100 percent charge before you attempt to use it again.

            Sometimes built-in rechargeable batteries start to lose their ability to retain a charge. If you’ve noticed that your mouse is working less and less between charges, it might be time to replace another one. At the very least, start shopping when the charge frequency gets inconvenient. 

            Windows Settings Adjustments

            There are two main things to concern yourself with on Windows regarding your wireless mouse. First is the driver installation and upkeep, and second, the mouse settings. A problem in either can cause your wireless mouse not to work.

            Driver Installation and Upkeep

            When you first connect your USB dongle to your computer and turn on your mouse, Windows should start to install the drivers. However, that isn’t always something that triggers exactly when it’s supposed to.

            If you have the drivers on removable media or downloaded from the manufacturer’s website, install them. If not, follow these steps to have Windows search for a new device and drivers.

            You can also scroll down to the listing for your wireless mouse in the Device Manager and search for new drivers. Out-of-date drivers can often create problems for peripheral devices.

            If your mouse isn’t appearing in the Device Manager at all, it might not be connected to the computer. Every device Windows detects should be accessible there. 

            Mouse Settings in Windows

            You should also check your mouse settings, especially if your problem is related to erratic mouse movement. Sometimes adjusting your settings can improve its behavior or fix issues you didn’t know settings could create.

            If you have misconfigured options, it might feel like your wireless mouse isn’t working right. At the very least, checking the settings gives you the peace of mind to know they’re correct. 

            Computer Hardware Problems

            Sometimes the problem with a wireless mouse is a computer hardware problem. I experienced this one, and it was very annoying to solve because it didn’t occur to me right away.

            The motherboard on the computer I was using was never connected to the front USB ports on the computer tower. They weren’t getting any power. However, I didn’t realize that because it wasn’t a computer that I built myself. I plugged in a USB dongle and had no response from my wireless mouse or computer.

            If any of your USB ports aren’t working for any reason, it can stop your wireless mouse from making the connection. Check your ports by connecting to other devices. Try different ports.

            Each time, give your computer a chance to check for drivers and detect the mouse. You may find a port that works even if a few of them are damaged or disconnected. 

            You can also try the wireless mouse on another computer to see whether it works or is broken. 

            Common Problems with Wireless Mice Brands

            Certain troubleshooting tips only apply to specific wireless mouse brands.


            The best way to manage your Logitech mouse is with G Hub, the brand’s peripheral device management software. Make sure to open G Hub and check to see that the software detects the wireless mouse. If you don’t have G Hub, download it from the Logitech Website to manage your mouse. 

            Make sure you’re running the latest firmware in G Hub too. In 2023, a firmware update wasn’t pushed directly to G Hub users, and they had to download it manually. Doing so fixed a variety of problems with their products. 

            If the Logitech mouse you’re using has a reset button, try to use it before troubleshooting the mouse. Hold the reset button for five seconds with the mouse on before attempting to use the mouse again. 


            One fix Razer recommends for wireless mice that aren’t working is cleaning the tracking sensor on the bottom of the mouse with a q-tip dampened with isopropyl alcohol. Make sure to remove the dongle from the computer and turn off the mouse before starting.

            They also recommend plugging in the dongle directly to the PC and not into a USB hub. 

            If you’re having a calibration issue with a Razer wireless mouse, try to reset it.

            Once you’re done, the mouse should be recalibrated. This is particularly good at fixing issues that feel like a laggy connection or something similar. 


            Corsair has a process you can use to reset a wireless mouse experiencing issues.

            Frequently Asked Questions How Do I Reset My Wireless Mouse?

            That depends on the brand. Not every wireless mouse has a reset protocol. Check your documentation or the manufacturer’s website for your specific model to see what options are available for you.

            Why Aren’t Batteries Working in My Wireless Mouse?

            If you’re using new batteries and it still isn’t working, check to ensure the battery area is clean and free of corrosion. Clean it off when the surface is dirty and let it dry thoroughly before inserting new batteries. If it still doesn’t work, you might have to start shopping for a new mouse. 

            Can a Wireless Mouse Go Bad?

            A wireless mouse will eventually stop working even if you treat it gently and don’t use it very often. The harder and more often you use it, the quicker it will reach the end of its life. 

            What Is the Lifespan of a Wireless Mouse?

            Mac Bluetooth Not Working? Here Are The Fixes

            Mac Bluetooth Not Working? Here Are The Fixes What To Do If Mac Bluetooth Is Not Working? Reboot Your Mac

            Remove All USB Devices

            This step is in addition to step number 1 i.e. rebooting Mac. Here, disconnect all your USB devices – mouse, speaker, keyboard, etc one by one. Once you are done with detaching all the devices, reboot your Mac and now try forming a connection once again.

            Reset PRAM on Mac

            Sometimes an underlying issue can be the reason why your MacBook Bluetooth is not available. That is the time you can reset PRAM on your Mac. For that –

            2. Press the Power button

            3. Immediately press the combination of four keys at the same time- Option + Command + P + R

            4. Hold these until you hear Mac’s startup sound the second time

            5. Release the keys

            Disable and Enable Bluetooth

            1. Go to System Preferences

            3. Turn your Bluetooth off

            Get Rid of All Current Bluetooth Preferences

            Getting rid of existing Bluetooth preferences can also help if Bluetooth is not connecting on Mac. First and foremost, get rid of all the apps and devices that use Bluetooth and then follow these steps to remove all current Bluetooth preferences.

            1. Open Finder

            2. Press Command + Shift + G

            3. In the Go to the folder Window enter /Library/Preferences/

            4. Locate the file’s apple.Bluetooth.plist and It could be that these files are corrupt

            5. Delete these files

            6. Restart your Mac

            Reset The Bluetooth Module

            Another way to fix “MacBook Bluetooth not available” is to reset your Bluetooth module. This will help tackle any underlying Bluetooth issues at a deeper level. To do that –

            1. Hold Shift + Option

            4. Select Remove all devices

            6. Select Reset the Bluetooth module

            7. Reboot Mac and again try and pair your Bluetooth devices again

            In case none of these fixes worked for you, try eliminating system junk. Your Mac could be cluttered with the system-generated dump.

            CleanMyMac X is one of the best ways to remove any system-generated trash or even optimize Mac. Additionally, it can easily help your Mac remove any malware, language logs, login items, and a lot more.

            To use CleanMyMac X –

            3. Review any items that you don’t need

            Wrapping Up

            That’s it! Try the above fixes and let us know if you were able to fix the “Mac Bluetooth not working” issue. Even after trying the above-mentioned steps, if you are still not able to work a solution out and if moreover, the issue is accompanied by several other issues, consider taking your Mac to a service center. For more such content, keep reading Tweak Library. You can also find us on Facebook, Twitter, Instagram, Flipboard, Pinterest, and Tumblr. And, if you like tech videos more, you can also like, share and subscribe to our YouTube channel.

            Related Topics

            Quick Reaction:

            About the author

            Sarang Bhargava

            App Keeps Stopping On Android? 11 Fixes To Try

            Several factors cause an application to keep stopping or crashing in Android. The problem could be corrupt cache files, poor memory management, low storage space, software bugs, device incompatibility, etc. Poor or unstable internet connection and server downtime could also trigger the “App keeps crashing” error message.

            Given the diverse nature of the causative factors, you may have to try multiple troubleshooting steps to fix the problem. This tutorial covers possible ways to stabilize a crashing app on Android devices.

            Table of Contents

            1. Force Stop the App

            An Android app might keep stopping if it cannot complete a task or operation. Most times, force-stopping and reopening the app can set things back in order. 

            Long-press the app’s icon on the home page and tap App info or the info (ℹ) icon.

            Tap Force Stop and select OK on the confirmation prompt.

            Reopen the app and check if it runs without crashing. If the app keeps stopping, force-close the app again, force-close other applications, and reopen the app.  

            2. Clear the App’s Cache and Storage Data

            Over-accumulation of temporary files can also cause an app to keep crashing. Delete the app’s cache file and check if that stabilizes its performance. Otherwise, clear the app’s storage data and try again.

            Select Storage & cache and tap the Clear Cache button.

            Launch and use the app for a few minutes. If the problem persists, delete the app’s storage data and try again.

            Return to the app’s “Storage & cache” page (see step #3 & #4) and select Clear Storage. Select OK on the confirmation prompt to proceed.

            3. Update Android System Webview

            A buggy version of the Android System Webview once caused apps to crash unexpectedly on Android devices. Google has since released a stable version of the system component that fixed the app crash issue.

            Although Google automatically installed the stable version on affected devices, the company also recommends updating Android System Webview manually.

            Check the Android System Webview page in Play Store (open Play Store and search for “Android System Webview”) and tap the Update button.

            4. Update the App

            An app might exhibit different forms of malfunction if it’s outdated, poorly developed, or filled with software bugs. App developers work round-the-clock to fix bugs and other issues, so update the app if there’s a new version available. 

            Force-close the app and follow the steps below.

            Go to the application’s detail page and expand the “Advanced” drop-down option.

            Scroll to the “Store” section and select App details.

            That’ll launch the Play Store app and redirect you to the app’s page.

            Tap Update and reopen the app when the update is complete.

            Alternatively, open Play Store, type the app’s name in the search bar, select the app, and tap the Update button. If the app isn’t available on the Play Store, download and install the latest version of the app from safe and reputable APK websites.

            5. Check the App’s Permission Settings

            Apps may keep crashing if it doesn’t have permission to use some crucial device components (storage, camera, microphone, location, etc.). Go through the app’s settings and ensure it has access to the necessary permissions.

            Select any crucial permissions in the “Denied” section and change the access status to Allow.

            Note that you don’t have to grant the app all permissions on the page. There are some permissions you should never accept. Read our compilation of 30 app permissions to avoid on Android for more details.

            6. Check Your Internet Connection

            Network-related problems are sometimes responsible for app instability on Android devices, especially if the app requires an uninterrupted internet connection. Or if the app is unable to establish communication with the required servers.

            Try using other applications and check if they have internet access. Otherwise, put your phone in and out of airplane mode to refresh your cellular connection. If you’re using a Wi-Fi connection, restart your router and try again. Reset the router or contact your internet provider if the problem continues.

            7. Restart Your Phone

            Shut down your phone and power it back on if the app keeps stopping or crashing despite these troubleshooting steps. Performing a soft reset will free up your device’s RAM, terminate unneeded background apps/processes, and fix minor system errors causing apps to malfunction.

            Press and hold your phone’s power or lock button and select Restart on the power menu.

            When your device comes back on, open the affected app before any other app. If the app keeps stopping, contact the developer to report the problem.

            8. Reinstall the App

            Uninstall the app from your smartphone or tablet if it keeps freezing, stopping, or crashing. The steps to uninstall an app will vary based on the model of your smartphone and Android OS version.

            Press and hold the app icon on the Home Screen or app launcher and drag the icon to the Uninstall section in the top-right corner of the screen and select OK on the confirmation prompt.

            Reinstall the app from the Play Store or use its APK file and check if it works without any issues. If the app keeps stopping, restart your phone and check again.

            9. Downgrade the App

            If an app begins to crash after an update, that could be because the new version is incompatible with your device’s hardware or operating system. It’s also possible that the update contains some bugs. Sideload the older/stable version of the app instead. There’s no built-in technique to downgrade an app in Android. You’ll have to manually download and install the APK file of the older version.

            10. Free Up Storage

            Your smartphone and some apps may malfunction if it’s running low on storage space. Check your phone’s storage management interface and free up some space if it’s running low on storage. 

            If your device runs the stock Android OS, use the Google Files app to remove duplicate files, old pictures, unused apps, and other large files consuming storage space. Transferring files to an external SD card is another way to free up internal storage space in Android.

            11. Update or Downgrade Android

            There could be a problem with your device’s operating system if all applications crash when you open them. Check your device’s update section and install any update available for your smartphone.

            Downgrade your Android OS version if the app keeps crashing after an OS update.

            Contact the App Developer

            Your phone is up-to-date, other applications are working correctly, internet connectivity is up-and-running, there’s enough memory and storage to go round, but one particular app keeps stopping. What do you do? Contact the app developer if you’ve tried all the troubleshooting steps listed above.

            Open the app’s details page in the Play Store, expand the “Developer’s contact” section, and send a report to the email address or phone number on the page. Contact Google Play Help if the affected app is a Google app.

            Volume Or Sound Icon Missing In Windows 10: How To Fix

            By default, you should find a volume icon and a bunch of other system icons in the notification area (i.e. bottom-right corner of the taskbar) of every Windows 10 computer. The volume icon lets you easily adjust your computer’s output volume, troubleshoot sound problems, and even manage external audio devices.

            If the volume or sound icon is missing or you can’t find it on the taskbar anymore, refer to the troubleshooting solutions we’ve listed below.

            Table of Contents

            These solutions are not just specific to the volume icon. You can also use them to restore other system icons missing from your PC’s taskbar. 

            1. Check the Taskbar Configuration

            First things first—you need to make sure your computer’s taskbar is configured to accommodate the volume icon. Follow the steps below to (re)add the volume icon to the taskbar.

            3. Make sure Volume is toggled on.

            If Volume is enabled but the icon is still nowhere to be found on the taskbar, turn it off and back on. That could help restore the missing volume icon in Windows. Otherwise, proceed to the next step.

            5. Toggle on Volume on this page. If already enabled, turn it off and back on.

            A faster alternative is manually unhiding the volume icon. Tap the arrow-up icon on the taskbar and drag the volume icon to the notification area.

            2. Restart Windows Explorer

            Windows Explorer powers the taskbar, Start Menu, File Explorer, and Action Center on your Windows 10 computer. If the volume icon is missing, restarting Windows Explorer might help.

            That would refresh both the taskbar and notification center and hopefully restore the missing sound icon.

            You can also restart Windows Explorer using the Windows Command Prompt.

            2. Type the command below into the Command Prompt console and press Enter.

            taskkill /f /im explorer.exe

            The command will terminate Windows Explorer and your computer’s screen will go blank.

            3. Type the command below in the console and press Enter.

            chúng tôi

            Your desktop and taskbar icon will reappear on the screen. Proceed to the next solution if this doesn’t restore the missing volume icon.

            3. Update Audio/Sound Driver

            Outdated drivers can mess with your computer’s audio configurations and cause other related hardware problems. We recommend updating your computer’s driver to the latest version.

            3. Select Search automatically for updated driver software. Windows will search your computer and the internet for a new version(s) of your audio driver.

            If the volume icon is still missing, uninstall the audio driver. You don’t have to worry about breaking anything; Windows will automatically reinstall the driver.

            To immediately reinstall the deleted driver, select Action on the menu bar and select Scan for hardware changes.

            That would refresh the Device Manager and reinstall the audio driver. If the driver isn’t reinstalled, restart your computer and check again.

            It’s also worth mentioning that a bad, unstable, or poorly-developed driver with bugs could also mess with your computer’s audio configurations. If the volume icon is still missing on your computer after installing a new version of your audio driver, you should roll back to the previous version.

            4. Check Windows Group Policy Editor Settings

            Your computer will not display the volume or sound icon if this policy setting is active. Follow the steps below to check the status of the volume icon setting and disable it.

            1.  Launch the Windows Run box using the Windows key + R keyboard shortcut.

            2. Type chúng tôi into the dialog box and select OK.

            3. In the User Configuration section, expand the Administrative Templates category and select Start Menu and Taskbar.


            5. If the policy setting is enabled, set it to either Not Configured or Disabled.

            Select OK to save the change and confirm if that restores the missing volume icon. If nothing changes, restart your computer and check again.

            5. Update Windows

            A bug in your computer’s operating system could also cause this problem. If none of the troubleshooting solutions above resolved the problem, installing the latest Windows 10 update might help. Aside from bug fixes, Windows updates also ship with driver updates.

            Restore the Missing Volume Icon

            The volume icon is a convenient shortcut to many audio-related settings. If the volume icon is missing on your Windows 10 computer, at least one of these tips should restore the icon to the taskbar. As mentioned earlier, you can also apply these tricks to restoring other missing system icons to the taskbar.

            Update the detailed information about Volume Or Sound Not Working On Mac? 11 Fixes To Try on the website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!