You are reading the article Volume Or Sound Icon Missing In Windows 10: How To Fix updated in December 2023 on the website Bellydancehcm.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested January 2024 Volume Or Sound Icon Missing In Windows 10: How To Fix
By default, you should find a volume icon and a bunch of other system icons in the notification area (i.e. bottom-right corner of the taskbar) of every Windows 10 computer. The volume icon lets you easily adjust your computer’s output volume, troubleshoot sound problems, and even manage external audio devices.
If the volume or sound icon is missing or you can’t find it on the taskbar anymore, refer to the troubleshooting solutions we’ve listed below.
Table of Contents
These solutions are not just specific to the volume icon. You can also use them to restore other system icons missing from your PC’s taskbar.
1. Check the Taskbar ConfigurationFirst things first—you need to make sure your computer’s taskbar is configured to accommodate the volume icon. Follow the steps below to (re)add the volume icon to the taskbar.
3. Make sure Volume is toggled on.
If Volume is enabled but the icon is still nowhere to be found on the taskbar, turn it off and back on. That could help restore the missing volume icon in Windows. Otherwise, proceed to the next step.
5. Toggle on Volume on this page. If already enabled, turn it off and back on.
A faster alternative is manually unhiding the volume icon. Tap the arrow-up icon on the taskbar and drag the volume icon to the notification area.
2. Restart Windows ExplorerWindows Explorer powers the taskbar, Start Menu, File Explorer, and Action Center on your Windows 10 computer. If the volume icon is missing, restarting Windows Explorer might help.
That would refresh both the taskbar and notification center and hopefully restore the missing sound icon.
You can also restart Windows Explorer using the Windows Command Prompt.
2. Type the command below into the Command Prompt console and press Enter.
taskkill /f /im explorer.exe
The command will terminate Windows Explorer and your computer’s screen will go blank.
3. Type the command below in the console and press Enter.
chúng tôi
Your desktop and taskbar icon will reappear on the screen. Proceed to the next solution if this doesn’t restore the missing volume icon.
3. Update Audio/Sound DriverOutdated drivers can mess with your computer’s audio configurations and cause other related hardware problems. We recommend updating your computer’s driver to the latest version.
3. Select Search automatically for updated driver software. Windows will search your computer and the internet for a new version(s) of your audio driver.
If the volume icon is still missing, uninstall the audio driver. You don’t have to worry about breaking anything; Windows will automatically reinstall the driver.
To immediately reinstall the deleted driver, select Action on the menu bar and select Scan for hardware changes.
That would refresh the Device Manager and reinstall the audio driver. If the driver isn’t reinstalled, restart your computer and check again.
It’s also worth mentioning that a bad, unstable, or poorly-developed driver with bugs could also mess with your computer’s audio configurations. If the volume icon is still missing on your computer after installing a new version of your audio driver, you should roll back to the previous version.
4. Check Windows Group Policy Editor SettingsYour computer will not display the volume or sound icon if this policy setting is active. Follow the steps below to check the status of the volume icon setting and disable it.
1. Launch the Windows Run box using the Windows key + R keyboard shortcut.
2. Type chúng tôi into the dialog box and select OK.
3. In the User Configuration section, expand the Administrative Templates category and select Start Menu and Taskbar.
[17-group-policy-editor-windows-10]
5. If the policy setting is enabled, set it to either Not Configured or Disabled.
Select OK to save the change and confirm if that restores the missing volume icon. If nothing changes, restart your computer and check again.
5. Update WindowsA bug in your computer’s operating system could also cause this problem. If none of the troubleshooting solutions above resolved the problem, installing the latest Windows 10 update might help. Aside from bug fixes, Windows updates also ship with driver updates.
Restore the Missing Volume IconThe volume icon is a convenient shortcut to many audio-related settings. If the volume icon is missing on your Windows 10 computer, at least one of these tips should restore the icon to the taskbar. As mentioned earlier, you can also apply these tricks to restoring other missing system icons to the taskbar.
You're reading Volume Or Sound Icon Missing In Windows 10: How To Fix
How To Restore Missing Or Deleted Services In Windows 11/10
Due to one reason or the other, you may notice one or more Services is deleted in the Services Manager on your Windows 11 or Windows 10 computer. In this post, we will present the various methods or suggestions you can try to successfully restore missing or deleted Services in Windows 11/10.
Restore missing or deleted Services in Windows 11/10Windows Services are applications that typically start when the computer is booted and run quietly in the background until it is shut down. Essentially, a service is any Windows application that is implemented with the services API and handles low-level tasks that require little or no user interaction. Services provide core operating system features (such as printing, networking, remote access, File Explorer, Windows Search, updates, etc.) and apps to operate as intended.
PC users may need to restore a missing or deleted service or restore service configuration to default if changes to the Service General, Log On, Recovery, or Dependencies properties settings are causing an issue on your system.
You can restore missing or deleted Services in Windows 11/10 in either of the following ways:
Manually using Registry (.reg) files
Perform System Restore
Run SFC and DISM
Perform Reset This PC, Cloud Reset or In-place Upgrade Repair Windows 11/10
Clean Install Windows 11/10
Let’s take a look at the description of the process involved concerning each of the listed methods. But before you begin, please create a system restore point first so that you can revert if things go sideways.
1] Manually using Registry (.reg) filesTo manually restore missing or deleted Services in Windows 11/10 using Registry (.reg) files, do the following:
Log into a working recently updated Windows PC.
Once logged in, press Windows key + R to invoke the Run dialog.
In the Run dialog box, type regedit and hit Enter to open Registry Editor.
Navigate or jump to the registry key path below:
HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServices
At the location, on the left navigation pane, locate the Service folder for the Service missing/deleted for the other PC.
Export the registry key to an external USB drive.
Once done, unplug the USB drive.
Next, plug the USB drive to the PC that needs the Service.
You can now delete the .reg file if you like.
Repeat for any other missing or deleted Service you want to restore.
Restart PC when done.
2] Perform System RestoreSystem Restore is a native feature that ships with all versions of Windows OS that basically allows PC users to revert/restore their computer’s state (including system files, installed applications, Windows Registry, and system settings) to that of a previous point in time, which can be used to recover from system malfunctions or other problems.
3] Run SFC and DISMMaybe some system files have got damaged. Run System File Checker in Safe Mode and see if that helps.
Additionally you may also run DISM Offline to repair a corrupted Windows image and see if that work for you.
4] Perform Reset This PC, Cloud Reset or In-place Upgrade Repair WindowsIn severe cases of corrupt system files or missing, corrupted, damaged registry keys or even corrupt or damaged system image, you can try Reset This PC, or Cloud Reset to reset every Windows component. You may also try In-place Upgrade Repair which will certainly bring your system back to a pristine condition.
Related: How to repair Windows 11 without losing data or programs
5] Clean Install Windows 11/10If your PC had any software (mostly when all other software troubleshooting you’ve tried has been unsuccessful) or hardware issues, performing a clean install will likely resolve any problems. Keep in mind that during a clean install of Windows 11/10, which is recommended as a last-ditch troubleshooting process—all the data on the computer’s hard drive will be erased — so be sure to take any necessary precautionary measures before you proceed with the procedure.
That’s it!
How to reset all Windows Services to default settings?The best way to reset all Windows 11/10 Services to default settings is by running Reset This PC. The other way is to use the Repair this computer option in Windows Setup. There is also this script available on GitHub that claims to set Windows 10 Services back to default values based on Black Viper’s Service Configurations.
How do I restore Windows without a restore point?To restore Windows 11/10 without a restore point, you can use System File Checker, Run the DISM scan, Use Reset This PC or Repair your computer using an installation media. This will get your Windows back in a healthy condition.
Volume Or Sound Not Working On Mac? 11 Fixes To Try
For the most part, macOS is a well-behaved operating system that rarely experiences irritating day-to-day glitches, but now and then, you may find that your volume controls or even your sound output as a whole aren’t working correctly.
There are several reasons why this may happen. We’ll walk you through both rare and common Mac sound issues to help you fix the problem.
Table of Contents
1. Check The Mute Button!If you’re using an Apple keyboard, then the F10 key doubles as the audio mute toggle. It’s far too easy to accidentally tap this button, or have your cat “accidentally” step on it when you aren’t looking. So give the F10 key a press to see if it unmutes your sound.
2. Restart Your MacOne of the first things you should try is restarting your Mac. In our experience, a simple reboot resolves most sound glitches in macOS. Just ensure all of your audio equipment is connected before restarting the computer. Sometimes connecting audio devices after the computer has already started is the cause of the issue. So hook it all up before you see the Apple logo.
3. Check Your HardwareSometimes the problem is that you’ve simply hooked something up incorrectly. Make sure that you haven’t, for example, plugged your speakers into an input instead of an output. If you’re using a Bluetooth audio device, try resetting it to factory defaults and pairing it with your Mac again.
Here are some general things to check:
Make sure that your Mac speakers or headphones are properly plugged in.
Check your speakers’ or headphones’ audio output volume slider to ensure they are turned up.
Check the volume slider on your Mac to ensure that the volume level is turned up and the mute button is not enabled.
If you are using external speakers or headphones, try using the internal speakers (for MacBooks or iMacs or other Macs with built-in speakers) to see if the issue is with the external device.
Check for any visible damage to the headphone jack or audio port on your Mac and the speakers or headphones themselves.
If you suspect any specific piece of gear is to blame, try it with another device if possible to eliminate it as a suspect.
4. Check Your Sound SettingsWith your physical hardware inspected and in working order, the next troubleshooting step is ensuring your sound settings are correct.
To check your sound settings on a Mac, follow these steps:
In the
System Preferences/Settings window
, select
Sound
.
Under the
Output tab
, make sure that the
correct device
is selected as the output device. For example, you may have an HDMI device without speakers selected.
Under the
Input tab
, make sure that the
correct device
is selected as the input device.
Under the
Sound Effects tab
, make sure that the
Play sound effects through
option is set to the correct device.
Also, be sure to check that the volume slider isn’t muted.
If everything here looks correct, it’s time to move on to more sophisticated fixes.
5. Reset the NVRAM (Intel Macs) or PRAM (Apple Silicon Macs)NVRAM (Non-Volatile Random-Access Memory) or PRAM (Parameter RAM) are types of memory that store certain settings and information that your Mac uses to access certain features. If you’re experiencing an issue with volume or sound on your Mac, you may want to try resetting them, as this can sometimes help to resolve the issue.
Check out How To Reset PRAM & SMC On Your Mac for more information on how to perform the reset.
6. Check for Software UpdatesIf volume or sound is not working on your Mac, checking for any available software updates is a good idea. Outdated software can sometimes cause issues, and installing the latest version of macOS can help to resolve these issues.
If no updates are available or the issue persists after updating, try the next fix on the list. You can also use the terminal to perform updates manually.
7. Try a Different User AccountIf volume or sound is not working on your Mac, you may want to try logging in to a different user account to see if the issue persists. This can help to determine if the issue is specific to your user account or if it is a system-wide issue.
If the issue does not persist when logged in to a different user account, it is likely that the issue is specific to your user account and can be resolved by deleting or troubleshooting your account settings. If the issue persists when logged in to a different user account, it’s probably a system-wide issue requiring further troubleshooting.
8. Repair Disk PermissionsIf you’re experiencing an issue with volume or sound on your Mac, you may want to try repairing the disk permissions on your Mac. Disk permissions are a set of rules that determine which users and processes are allowed to access certain files and folders on your Mac. If the permissions are incorrect, it can cause issues with your Mac.
To learn how to repair disk permissions, check out How to Fix or Repair Disk Permissions in macOS.
9. Try Safe ModeYou may want to try starting your Mac in Safe Mode. Safe Mode is a special boot mode that allows you to troubleshoot and fix issues with your Mac by starting up with a minimal set of drivers and programs.
For instructions on how to boot into Safe Mode in macOS, check out How to Boot Up and Use a Mac in Safe Mode
If the issue goes away in Safe Mode, it’s a good bet that the problem is with a third-party application, not macOS.
10. Check for Third-Party Software ConflictsIf the problem isn’t present in Safe Mode, it’s a good idea to check for any conflicts with third-party software that you have installed. Third-party software can sometimes interfere with the normal functioning of your Mac and cause issues like this.
If the problem is present right from the moment you boot up your Mac, it’s likely one of your startup programs. Check out How to Enable or Disable Startup Programs on macOS to see how you can selectively disable programs until you find the one causing the issue.
11. Reset the System Management Controller (SMC)The System Management Controller (SMC) is a chip in your Mac that controls power to certain hardware components. If you’re experiencing an issue with volume or sound on your Mac, you may want to try resetting the SMC, as this can sometimes help to resolve the issue.
Check out How To Reset PRAM & SMC On Your Mac for more information on how to perform the reset. If the issue persists after resetting the SMC, you may want to consider looking for further assistance from a technical support specialist.
Further Troubleshooting StepsThe above fixes represent the most straightforward troubleshooting path for this particular problem, but if you still don’t have working sound, there are a few miscellaneous things you can try,
The Apple Hardware Diagnostic
Check for any hardware issues by running Apple Hardware Test or Apple Diagnostics. To do this, shut down your Mac and press the power button to turn it back on. Immediately press and hold the D key on your keyboard. Release the key when you see the login window. Apple Hardware Test or Apple Diagnostics will start automatically. Follow the prompts to complete the test.
On Apple Silicon Macs, the new method is to press and hold the power button from a power off state until you see a list of start options. Then press Command + D to start the diagnostic tool.
Using Disk Utility To Check for Errors and Corruption
Check for any corrupt system files by running a Safe Boot and using Disk Utility to repair the hard drive. To do this, start your Mac in Safe Mode and then run Disk Utility as described above.
Thunderbolt and USB Audio DevicesIf you’re using a Thunderbolt or USB audio device, try unplugging it and then plugging it back in to see if this resolves the issue.
Malware and VirusesIf you suspect that malware may be causing the issue, you may want to try running a malware scan on your Mac using an antivirus program.
Restarting Core AudioIf you’re experiencing an issue with coreaudiod, the core audio process that handles the sound controller, you may want to try restarting the process.
You can restart the Core Audio component by pasting the command below in Terminal and pressing Enter.
sudo killall coreaudiod
Iphone Ringer Volume Too Low Or Fades, How To Fix
You may be having a problem where your iPhone seems to ring too softly even though you have checked and turned up the volume. There are several settings on your iPhone that can affect the ring volume. In this article, we will take a look at those settings to help you find the problem and get your iPhone ringing as loudly as you would like it to.
The basic volume controls The Ring/Silent switchIf your iPhone is in Silent mode, it won’t ring. The Ring/Silent switch is located on the side of your iPhone, above the volume buttons. If the switch is pushed away from the screen, you will see orange on the switch, and the phone is in Silent mode. If this is the case, flip the switch toward your iPhone screen.
Volume buttons and Control Center volume controlsYou can turn up your iPhone’s volume using either the physical buttons on the side of your phone or the volume slider in the Control Center. To open Control Center, swipe down from the upper-right corner of your iPhone screen. These controls may or may not increase your ringtone volume, depending on your settings (see the next section).
Ring tones and ring settingsYou’ll find the ringtone and ring volume settings in Sound & Haptics. Open Settings, then tap on Sound & Haptics.
Ringtone and Alert VolumeThe main volume controls for your ringtone are in the Ringtone and Alert Volume section. Here you can:
Adjust the volume slider to increase your ringtone volume.
Toggle the Change with Buttons switch. Turn this off if you want to make sure you don’t accidentally turn your ring volume down too low. With it toggled off, your ring volume will always stay at the level you set it with the volume slider.
Sounds and Haptic PatternsIn this section, you can choose your ringtone and vibration pattern.
Tap on Ringtone.
If you want to change the vibration pattern, tap on Vibration.
Under Ringtones, tap on a ringtone to hear a preview. Choose one, then tap on Back in the upper-left corner.
Ring/Silent Mode SwitchIn this section, you can choose whether or not your iPhone uses haptics (vibration) when your phone is in Ring and Silent mode.
Other settings that affect the ringer Focus (fka Do Not Disturb)Any of the Focus modes can affect whether your iPhone rings or not when you receive a call. If you have one of the Focus modes enabled, you will see a small icon at the top of your iPhone screen, such as a crescent moon (Do Not Disturb) or a bed (Sleep). If you have any of your Focus modes set on a schedule, however, you may not see the icon just now, but your Focus modes could still be interfering with your iPhone’s ring during the scheduled times. To check your Focus modes:
Open Settings, then tap on Focus.
Tap on a Focus mode, then scroll down to the Turn On Automatically section.
If you see a schedule there, you can modify it if you like.
You can also scroll to the top under Allow Notifications and tap on People. Under Phone Calls, you’ll see your Allow Calls From setting. Tap on that to change it. Choose from Everybody, Allowed People Only, Favorites or Contacts Only.
Check each of your Focus modes.
Attention AwareYour iPhone has a feature called Attention Aware that detects whether or not you are looking at your device. This works on all Face ID iPhones, even when Face ID has not been set up on the phone. Attention Aware makes sure the display doesn’t dim while you are looking at it. It also lowers the volume of some alerts if you are looking at your phone. If you don’t want your phone to automatically fade the ringer volume while you are looking at the phone:
Open Settings.
Tap on Face ID & Passcode. Enter your passcode if prompted.
Scroll down to find Attention Aware Features and toggle it off.
Related articles
Extend Volume Option Is Grayed Out Or Disabled In Windows 11/10
If you find that the Extend Volume option is grayed out or disabled in Disk Management Tool in Windows 11/10/8/7, then this post will explain why this happens & what you can do about it. We can use the built-in Disk Management Tool or the Diskpart or Fsutil command-line tools to create, resize, extend, and delete partitions. But what if the Extend Volume option is grayed out or the Extend command fails?
The Windows operating system lets you extend any volume provided there is free or unallocated space on its right side. If there is no unallocated space, you will not be offered this option and it will appear grayed out.
Why is the Extend volume option grayed out?These could be the possible reasons for Extend volume option grayed out. This could occur if there is no unallocated space on your hard drive. Also, if there is no contiguous unallocated space or free space behind the partition that you want to extend. Lastly, Windows can’t extend is a FAT or other format partition.
How do I fix Extend volume option grayed out?If you need to extend the volume, you will need to delete the partition on the right side, i.e., behind the partition you want to extend and create unallocated space.
If it is your Data Drive that you want to extend, then there is a workaround. Say you have a System Drive – C and a data drive – D. You want to extend D drive, but the option is grayed out. What you can do is Shrink the System Drive to create unallocated space, which will be on the left side. Create a new volume with this unallocated space. Then move your data from the D drive to this new volume. Having done this, delete D Drive and then you will be able to extend the new drive since there will be unallocated space now on its right side.
If it is your C or System Drive that you want to extend, copy all your data from your D or data Drive to an external drive or USB. Then delete the D volume. Now you will be able to extend C Volume. Utilize the space you want to, and then with the remaining unallocated space create a new volume and name it D. Now transfer your data back to the D drive from the external drive.
A few points to note about extending volumes, as mentioned by TechNet:
The partition must have an associated volume before it can be extended.
For basic volumes, the unallocated space must be on the same disk and it must follow the partition which you want to extend. That is, it must appear on the right side in Disk management.
A dynamic simple or spanned volume can be extended to any empty space on any dynamic disk.
If the partition was previously formatted with NTFS, the file system is automatically extended to fill the larger partition, and no data loss will occur.
If the partition was previously formatted with a file system other than NTFS, the Extend command might fail.
If the partition was not previously formatted with a file system, the partition would be extended.
Similar: All options greyed out in Disk Management
Why is Extend volume disabled in Windows 11/10?When you see the Extend Volume option grayed out on your computer, it signifies that there is no unallocated space on your hard disk. As there is no unallocated space after the C partition drive, so “Extend Volume” option is disabled. In this situation what you can do is, free up some space first, then you can extend your partitions.
There are some free Partition Manager software that can help make the job of deleting, merging, and extending volumes easier. You might want to take a look at them.
TIP: See this post if the Delete Volume option is greyed out.
How To Increase Icon Cache In Windows
For most media files like videos, photos, etc., and documents like PDFs, Windows tries to show you a preview of the file as a thumbnail instead of a generic icon. This helps you to quickly recognize the files without actually opening each and every file.
However, the downside of this approach is that your File Explorer may be slow to load all the thumbnails or may even freeze at times. Of course, this all depends on how many files are there in a given folder. In those situations you can do two things: rebuild the icon cache or increase the icon cache so that Windows can store more thumbnails without removing the old ones.
When you allow Windows to store more thumbnails by increasing the icon cache, the file-loading process in File Explorer will be much faster, and you can view all the file previews without waiting for the infamous green loading bar.
Note: I’m showing this in Windows 10; the procedure is the same for Windows 7 and 8.
Increase Icon Cache in WindowsAfter opening the Windows Registry Editor, navigate to the following location. If you are using Windows 10, then simply copy the below path, paste it in the address bar and press the Enter button.
Name the new value as “Max Cached Icons” and press the enter button to save the changes.
Once you are done editing, this is how it looks like in the registry editor.
Just close the Registry Editor and restart your system to make the changes take effect. You should now see that the File Explorer is loading fast with necessary file previews.
If you ever want to revert back, simply change the value data to 500 or delete the newly created value.
Vamsi Krishna
Vamsi is a tech and WordPress geek who enjoys writing how-to guides and messing with his computer and software in general. When not writing for MTE, he writes for he shares tips, tricks, and lifehacks on his own blog Stugon.
Subscribe to our newsletter!
Our latest tutorials delivered straight to your inbox
Sign up for all newsletters.
By signing up, you agree to our Privacy Policy and European users agree to the data transfer policy. We will not share your data and you can unsubscribe at any time.
Update the detailed information about Volume Or Sound Icon Missing In Windows 10: How To Fix on the Bellydancehcm.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!