Trending November 2023 # Using Hp Pc Hardware Diagnostics Uefi On Windows 11/10 # Suggested December 2023 # Top 16 Popular

You are reading the article Using Hp Pc Hardware Diagnostics Uefi On Windows 11/10 updated in November 2023 on the website Bellydancehcm.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested December 2023 Using Hp Pc Hardware Diagnostics Uefi On Windows 11/10

The HP PC Hardware Diagnostics UEFI is an official application from the company that provides a broad set of tests for isolating, identifying, and diagnosing the possible issues on your PC hardware. It comes pre-installed with new HP computers. But, if the application is not available on your system, then you can also download it from the official website and install it.

HP PC Hardware Diagnostics UEFI

While it is evident, do note that the tool runs outside the Windows 10 OS. It makes it easy to isolate hardware failures from issues caused either by the OS or any application. It checks for problems in Memory or RAM and Hard Drive. If the test fails, it will show a 24-Digit failure ID. You will need to connect with HP’s customer support with it.

HP PC Hardware Diagnostics comes in two versions — Windows version and UEFI versions. The UEFI version should be used when you cannot boot into Windows. In this post, we will talk about the UEFI version, how it works, and how you can install it on EFI Partition or USB drive.

How to run the UEFI Tests

UEFI Fast and Extensive test

How to install HP PC Hardware Diagnostics UEFI

HP PC Hardware Diagnostics for Windows

How to run the HP PC Hardware Diagnostics UEFI

If the computer has the UEFI diagnostic tool installed on the computer, it can be launched using the F2 key. However, if the tool is not installed, you can create a USB. Lets first take a look at how you can use it when it is available on the computer.

Completely power down the computer ( hold the power button for at least five seconds to turn off the computer), and then turn it on. Immediately press the F2 key repeatedly until the UEFI menu opens.UEFI menu will give a couple of diagnostic tools, select the one you want, and follow the on-screen instructions.

In both memory and hard disk test, the tool will run the Fast Test to identify hardware issues quickly. If there is no error detected, but the computer has hardware problems, then it will run the Extensive Test. The later can take hours to complete the test.

UEFI Fast and Extensive test

The screen displays the progress bar on a Command Prompt screen along with the estimated time left to complete the test. You can always press ESC to cancel the test, but do so only when you have no other choice.

If the tool doesn’t find any error, then you should see “Passed” message, else it will kick start the extensive test.

The process is the same for Hard Disk check. In our case, while the Smart Check passed, the Short DTS check failed.

It then displayed Failure ID, Product ID, and drive number related to it.

If you receive the same, you can go to the HP customer support website and enter the code, product ID and select your country to resolve the problem further.

How to install HP PC Hardware Diagnostics UEFI

It is possible to run the UEFI diagnostics tool from a USB drive or install it on the UEFI partition on your computer. In case you cannot access Windows, we suggest using another computer to create the USB drive, and boot the computer to access the tool. However, make sure to disable Secure boot before doing that. HP says that you can use it on any HP computer where it’s not preinstalled.

Not only you can use this tool in case of a hardware issue, but if your computer is locked, you can use it to recover the computer.

Go to the HP Hardware Diagnostics website and download HP Diagnostics UEFI.

Locate the folder and run the EXE file.

To download onto the computer to test, choose UEFI Partition on Hard Drive

To download to a USB drive, select USB Flash Drive

To run the tool from the USB drive, follow these steps:

Insert the USB device, turn on the computer, and press the

Esc

key repeatedly until the Startup menu displays.

Then press

to select

System Diagnostics and the

preferred language from the list.

It will launch the PP PC Hardware Diagnostics home page opens, showing the version number and USB

You can now choose to run

Symptom tests

System tests

Component tests

You also get access to Test logs, change language, or exit.

HP PC Hardware Diagnostics for Windows

If you can access your computer but have a hardware failure for audio, video, and other input devices, you can install the Windows version. They also have an app in the Microsoft Store. Similar to the UEFI tool, it offers Symptom, system, and component tests.

HP PC Hardware Diagnostics UEFI failed

If a component fails a test, do the following:

Follow the on-screen instructions to resolve the problem

If the problem is resolved, Good!

Use the failure ID (24-digit code) and product ID when you contact HP Customer Support

We hope you were able to run HP PC Hardware Diagnostics UEFI when in need or install it to troubleshoot hardware issues on the computer.

TIP: You can use HP Support Assistant to update drivers and firmware.

You're reading Using Hp Pc Hardware Diagnostics Uefi On Windows 11/10

Fix: Photoshop Not Using Gpu On Windows 10 & 11

Fix: Photoshop Not Using GPU on Windows 10 & 11 [ 5 Ways] Explore expert-recommended methods to resolve the problem

617

The reason behind the issue could be the outdated app, outdated Windows OS, or old GPU driver.

To fix it, you need to update Windows OS, and the Photoshop app, or set the maximum performance to Photoshop.

INSTALL BY CLICKING THE DOWNLOAD FILE

Try Outbyte Driver Updater to resolve driver issues entirely:

This software will simplify the process by both searching and updating your drivers to prevent various malfunctions and enhance your PC stability. Check all your drivers now in 3 easy steps:

Download Outbyte Driver Updater.

Launch it on your PC to find all the problematic drivers.

OutByte Driver Updater has been downloaded by

readers this month.

Many users have complained about the graphics processor not being detected by Photoshop. It can be frustrating as it stops you from using vital features to edit photos. Thankfully, it can be fixed.

Here, in this post, we will discuss how to fix Photoshop not using GPU issue right after talking about the causes of its occurrence.

Why does Photoshop not use GPU on Windows 10 & 11?

Expert tip:

Outdated or corrupted graphics drivers – If the graphics drivers of your device are old or corrupt, then Photoshop might not recognize the GPU. You need to update the graphics drivers to fix the problem.

Corrupted or missing files – If Photoshop is missing files or has corrupt files, then Photoshop might not be recognizing GPU.

Windows OS outdated – If you have Windows updates pending, you might get this. You need to keep your Windows updated to avoid any issues.

Photoshop app is not up to date – The app installed on your computer is not the latest version so this issue could happen.

What can I do if Photoshop does not detect the GPU?

Before making significant changes via troubleshooting steps, make sure you go through these preliminary checks to fix the Graphics processor greyed out on Photoshop:

Restart your computer.

Check for Windows updates.

1. Set Photoshop to high performance

Ensure your system performs smoothly and avoids all GPU driver errors by using a complete driver update assistant, namely Outbyte Driver Updater, that will do the job for you. Here’s how to safely update your drivers:

Download and install the Outbyte Driver Updater app.

Launch the software and wait for the app to detect all incompatible drivers.

Now, it will show you a list of all faulty drivers to select the ones to Update or Ignore.

Restart your PC to ensure the applied changes.

OutByte

Keep your GPU in a flawless state without worrying about possible driver issues.

Free trial Download now

Disclaimer: You may need to upgrade the app from the free version to perform specific actions.

3. Make changes to Photoshop app settings 3.1 Enable the Legacy Compositing option

Launch the Photoshop app.

Go to Performance from the left pane, select Preferences from the left pane, and place a checkmark beside Legacy Compositing.

3.2 Modify the Cache Levels

On the Photoshop app, go to Preferences.

Choose Performance.

Look for Cache Levels and change them to 4.

3.3 Disable the Use OpenCL option 4. Delete or change the location of the Sniffer app

Press Windows + E to open File Explorer.

Go to this PC and navigate to this path: C:Program FilesAdobeAdobe Photoshop

Locate Sniffer. Either delete the app or change its location.

Finally, close the window and check if Photoshop is fully operational.

Still experiencing troubles? Fix them with this tool:

Fixblue Screen On Windows 11/10

If you get the Blue Screen error on Windows 11/10 saying that iaStorAVC.sys failed, here are some tips to help you get rid of this issue. You need to follow all of them one after one to troubleshoot this BSOD, which is related to Intel Rapid Storage Technology.

Fix chúng tôi failed Blue Screen on Windows 11/10

To fix chúng tôi Blue Screen on Windows 11/10, follow these steps:

Install or update IRST driver

Remove and reinstall IRST driver

Restart Intel Rapid Storage Technology service

Enable AHCI

To learn more about these steps, continue reading.

1] Install or update IRST driver

If you are using an Intel chipset, it is recommended to install the Intel Rapid Storage Technology driver on your computer. It helps you establish a connection between your chipset and hard drive, which is one of the most important components. Although modern-day computers may not need this driver, it is highly recommended to install the driver on your PC. However, if you have already installed it a long time back, it is suggested to check for updates. If you recently installed a Windows Update, and the system broke after that, you can search for pending updates and install them accordingly.

You may use download, install, and update Intel Drivers with Intel Driver & Support Assistant.

2] Remove and reinstall IRST driver

As this Blue Screen error occurs mainly for the Intel Rapid Storage Technology driver, it is recommended to remove it once. If an internal conflict is blocking your system from running the IRST driver on your PC, you won’t be able to use your PC without any error.

That is why you can remove the IRST driver from your PC using the Device Manager. For that, do the following:

Press Win+X to open WinX menu.

Select Device Manager.

Expand the Disk drives section.

Confirm the change.

Insert the motherboard installation media.

Install the Intel Rapid Storage Technology driver.

After that, you should not have any problems.

3] Restart Intel Rapid Storage Technology service

To run the IRST on your PC, a service runs in the background. It is called the Intel Rapid Storage Technology service. If it is stopped due to any reason, there is a chance of getting such an error. Therefore, follow these steps to verify if the service is running or not:

Select Automatic from the drop-down list.

4] Enable AHCI

If you have an old PC, you may get this problem due to not having the AHCI enabled. In that case, you can follow this guide to enable AHCI in Windows after installation to get rid of this problem.

Related: Intel Rapid Storage Technology Service not working

How do I fix iaStorA.sys?

It is pretty straightforward to fix the chúng tôi BSOD error on Windows 11 and Windows 10. You can fix it by updating the Intel Rapid Storage Technology driver or Intel SATA/AHCI driver. However, if that doesn’t work, you can fix it by removing and reinstalling the same driver. For your information, you can do it with the help of the Device Manager.

How do I change my chúng tôi driver?

It is not possible to change the Intel Rapid Storage Technology driver on Windows 11/10 if you are using an Intel chipset. However, it is possible to update the driver if an update is pending. In that case, you need to download the update from the official manufacturer’s website. However, if you haven’t installed the driver, you need to find it on the CD given to you while purchasing the chipset.

That’s all! Hope this guide helped.

Read: Fix High CPU usage by IAStorDataSvc on Windows.

Fix Critical_Structure_Corruption Bsod On Windows 11/10

CRITICAL STRUCTURE CORRUPTION Blue Screen is caused when the kernel detects critical kernel code or data corruption. It has been noted that the BSOD appears when using the computer or during the booting process. In this post, we are going to talk about this Blue Screen of Death and see what you can do to resolve it.

The CRITICAL_STRUCTURE_CORRUPTION bug check has a value of 0x00000109. This indicates that the kernel has detected critical kernel code or data corruption.

What causes CRITICAL_STRUCTURE_CORRUPTION Blue Screen?

There are multiple reasons why you might get CRITICAL_STRUCTURE_CORRUPTION BSOD error on Windows 11/10 PC. However, some of the common reasons are:

A driver has modified critical kernel code or data.

A hardware corruption occurred.

A software code attempted to take some unauthorized actions and failed.

Fix CRITICAL STRUCTURE CORRUPTION Blue Screen

If you encounter CRITICAL_STRUCTURE_CORRUPTION BSOD on Windows 11/10, follow these suggestions and see if they help:

Make sure to not have any incompatible device

Run System File Checker and Deployment Imaging and Service Management commands

Run Memory Diagnostics to find out if there is some hardware issue

Update all your device drivers

Run Online Blue Screen Troubleshooter

Check the System Log in Event Viewer

Troubleshoot in Clean Boot

Repair System Files using the Installation Media.

Let us talk about them in detail.

1] Make sure to not have any incompatible device

If you have added any device to your computer, its driver gets installed, that’s why it is very important to make sure that you are not using any incompatible device. You need to confirm that any new hardware that is installed is compatible with the installed version of Windows.

You can also try running the hardware diagnostics supplied by the system manufacturer and see if that helps

2] Run System File Checker and Deployment Imaging and Service Management commands

Next up, we will be repairing your system files using the SFC and DISM commands. These commands will scan your computer for corrupted files and then repair them. To do the same, open Command Prompt as an administrator and run the following command.

sfc /scannow

If this SFD doesn’t work, run the following command.

Dism /Online /Cleanup-Image /RestoreHealth

You may see the error code in question if some of the disk files are corrupted. That is why we will be running a CHKDSK command that will scan your disk and repair the bad sector.

To do the same, first of all, open Command Prompt as an administrator and run the following command.

chkdsk/f

You will be asked to confirm your action, so, hit Y and then Enter. Hopefully, this will do the job for you

3] Run Memory Diagnostics to find out if there is some hardware issue

There is a possibility that BSOD is caused due to malfunctioning hardware. Windows has a built-in program called Memory Diagnostics that will scan your computer for malfunctioned hardware parts and then show you the results. To run the tool, you need to open Memory Diagnostics using Run, just hit Win + R, type “mdsched.exe”, and hit Enter. Then, select Restart now and check for problems. Your computer will shut down and it boots up again, Memory Diagnostics will show you the results. In case, your hardware is not malfunction, there is no need to worry. However, if there is some kind of malfunction contact an expert or computer manufacturer.

4] Update all your drivers

A BSOD can also be caused because of a bug in one of your drivers. Since we are not developers of those drivers, the only thing we can do is wait for an update that will resolve the issue.

If a driver is identified in the bug check message, disable the driver and see if that helps; else update your drivers and see.

Windows actually has great integration with drivers and more often than not, it will either prompt you to update them or install the latest version automatically. Either way, we have mentioned some simple ways to update your drivers.

Hopefully, this will do the job for you.

5] Run Blue Screen Troubleshooter

Next up, let us run the Microsoft Online Blue Screen Troubleshooter which will scan your computer for the cause and then repair it. Hopefully, this will do the job for you.

6] Check the System Log in Event Viewer

Check the System Log in Event Viewer for additional error messages that might help identify the device or driver that is causing this bug check. You check the BSOD log file in Event Viewer and then ask the experts to suggest solutions.

7] Troubleshoot in Clean Boot

Maybe the reason why you see this BSOD is a third-party application. It can interfere with Windows processes and stop them from performing their task as a result of which, the BSOD is caused. However, since we don’t know which app is the culprit, in this case, we will be performing Clean Boot which will turn off all processes except that of Microsoft. You can then enable processes manually to find out which app is the culprit here. Then, uninstall the app and hopefully, that will do the trick for you.

8] Repair System Files using Installation Media

If nothing worked, your last resort is to repair the system files using Installation Media. This is something we use when the system image is corrupted beyond the point of repair using the commands we mentioned earlier.

We hope that your issue will be resolved using the solutions mentioned in this post.

Also Read: Bluescreen after installing Drivers in Windows 11/10

How do you fix Critical Structure Corruption error in Windows 11/10?

More often than not, Critical Structure Corruption is a result of corrupted system files. In order to fix the issue, you need to find a way to repair the corrupted file or any other elements of your computer. You can do that, by following the solutions mentioned in this post, just, start from the first solution and then move your way down. Hopefully, you will be able to resolve the issue pretty easily.

Read: Where is the BSOD log file location in Windows 11/10?

First 10 Things To Do On Windows 11

Following a three-month-long developer and beta testing phase, Windows 11 is now available for download for the end-user. For those of you who’re just updating your PC to Windows 11, there’s a whole lot of surprises in store for you. Here are the top 10 things to do on Windows 11 when you first boot up your system.

Top 10 things to do on Windows 11

Windows 11 brings a plethora of new features and updates many of the old ones to modernize their form and function. Though most of them are quality-of-life improvements, not all the changes are exactly welcome. So, let’s go through all the things that you might want to change or check out on the new Windows 11.

1. Move the start menu to the left

The jury is still out on whether the Start menu center alignment is a good move on Microsoft’s part. But, whatever the final verdict may be, one cannot deny that it’s bold and eye-catching. Not everyone is a fan of this, though, and if you want to revert the Start menu to where it used to be, here’s how to do so:

Choose Left.

The Start Menu will instantly shift to the left.

Related: Windows 11: How To Get Back the Windows 10 Start Menu

2. Use Snap Layouts and Snap Groups

If you’ve ever used PowerToys’ FancyZones function, you know what Snap Layouts do. When you have multiple windows or folders opened up, you can hover over the ‘maximize’ button and select how you would like to lay them out on your screen. Alternatively, press the Windows key + Z shortcut to bring it up.

As soon as you choose a layout, you’ll be asked to pick the windows that you want occupying the remaining area of the screen.

This will snap the windows according to the chosen layout.

Your chosen layout will be saved as a ‘Group’. This will be visible in the taskbar as you hover over the opened windows in the taskbar.

Snap Layouts and Snap Groups is a highly convenient and productive feature that lets you align windows and snap them to fit a part of the screen.

Related: Windows 11 Snap Layouts not working? Here’s how to fix

3. Turn on Compact View

One thing that you’ll notice straight out of the gate is that the folders and files in File Explorer are a little spaced out.

This is to make things a bit more accessible and easy to see. But this also means that your screen will show fewer files on your screen before you have to start scrolling. If you’re not a fan of the spaced-out files, you can turn on ‘Compact View’, which, as the name suggests, reduces the space between individual files and folders and makes them appear more compact on your screen. Here’s how to do so:

Then select Compact View.

Your files and folders will be shown in a more compact view now.

Related: How To Increase Space Between Items on Windows 11 File Explorer

4. Try Widgets

Widgets are back on Windows and in a much better avatar than their previous iterations. By default, you can access Widgets straight from the taskbar.

You can customize your widgets as per your needs so that you are shown only that which you want to keep tabs on, nothing more. Every widget will have an ellipsis icon (More Options) towards its top right where you will get the option to set the size of the widget, customize it for information, or remove it.

Select from the available widgets.

It will be added to the Widgets screen instantly.

5. Integrate your smartphone with the ‘Your Phone’ app

The ‘Your Phone’ app has been around for a while now. But with Windows 11, the integration has become way more seamless, even more so for exclusive Samsung smartphones. On the Your Phone app, you can drag and drop files between your PC and your smartphone, use the Windows context menu on your phone’s media, check incoming notifications on your Android phone, and attend calls on the PC.

For those of us who don’t have a high-end Samsung phone, the Your Phone app is still worth a shot. With it, you can make and take calls on your PC, check messages, and manage your mobile notifications. To set it up, press Start, type ‘Your Phone’, and select the Your Phone app.

Then go through the on-screen prompts to integrate your smartphone with Windows 11.

6. Try Teams Chat (Or, remove it from taskbar)

Microsoft Teams has received a deeper integration on Windows 11, so much so that its ‘Chat’ feature has its own dedicated spot on the taskbar by default.

This will open the Microsoft Teams app. Select your account.

Once signed in, the Microsoft Teams app will be ready and you can start interacting with your contacts.

If you don’t want the Teams ‘Chats’ appearing in your taskbar, here’s what you need to do:

Then toggle off Chats.

Uh, you can also remove the Teams Chat icon from your taskbar. See the guide below.

Read: How to Remove Microsoft Teams Chat From Taskbar

7. Use multiple desktops

The ability to use multiple virtual desktops on Windows is another one of those features that’s been around a while but wasn’t as accessible as it is on Windows 11.

This ‘Task View’ button is now available straight from the taskbar. Hovering over it will display the desktops that you’re currently using as well as an option to add a New Desktop.

The ‘Task View’ button makes it convenient for users to keep different desktops for different purposes, say, one for work, one for entertainment, and one for whatever else.

8. Check out the new Microsoft Store

Windows Store now goes by the name of Microsoft Store. But the change isn’t just nominal; there are a variety of changes that both developers and end-users would greatly benefit from.

Game developers can already upload win32 versions of their apps on Microsoft Store, and now, that convenience is being afforded to other app developers as well.

But the best bit is that Microsoft is also bringing Android apps to Windows. Though the mechanism for this is quite strange, that is, through the Amazon Appstore, the end result would be that users will be able to search for and use Android apps on Windows. But this also means that users will have to sign in to their Amazon account instead of their Google account.

Though the idea is yet to materialize in its full form for Windows users, only time will tell how effective it is in getting more developers to bring their apps to the Microsoft Store and for users to use Android apps on their Windows 11 PC.

9. Open File Explorer to ‘This PC’

This is a slight modification, but one that will make it much more convenient for users to get to ‘This PC‘ when they open File Explorer. By default, when you open File Explorer, you’re taken to ‘Quick Access’. Here’s how to change that:

Select This PC.

Now, whenever you open File Explorer, you’ll be taken directly to ‘This PC’.

Related: Where is ‘My Computer’ on Windows 11? How to Find ‘This PC’ Easily!

10. Customize the Action Center

This is where you’ll be able to turn on/off Wi-Fi, Bluetooth, Airplane mode, focus assist, and other featured shortcuts.

To edit which options appear in the Action Center, refer to our complete guide on How to Add, Remove, or Change Order of Shortcuts in Windows 11 Action Center.

So these were the top 10 things to do that we think you would greatly benefit from when you first boot up to Windows 11.

When Will My Pc Get Windows 11?

In fact, if you’re planning to wait for Microsoft to offer you the free update to the latest version of the operating system then you might be waiting a while.

But how long might you have to wait? Here’s what we know so far.

When is Windows 11 coming to my PC?

Windows 11 is a free upgrade for compatible Windows 10 devices. Rollout began on the 5 October release date, but most people will be waiting until 2023 to update their laptop or PC.

Microsoft is throttling up availability in order to manage demand, as it does with Windows 10 feature updates. Depending on the age of your hardware, you could be waiting until mid-2023 before you can download it.

However, in an official blog post on

How to get Windows 11 right now

The good news is that you don’t have to wait if you don’t want to. As long as your PC is eligible for the new software – more on that below – you can get Windows 11 without waiting for Microsoft to offer it to you.

Simply head to the official Windows 11 download page and choose how you’d like to install the update: the Microsoft installation assistant will be the best (and easiest) option for most people, but there are also options to create a bootable USB or DVD installer via the official installation media, or download a disk image ISO.

Learn more in our separate guide: How to get the final version of Windows 11 now.

Which devices will get Windows 11?

Over the course of the next few years, Windows 11 is expected to run on hundreds of millions of PCs. Microsoft will hope to get close to the 1.3bn Windows 10 devices, but the updated hardware requirements make that unlikely anytime soon.

Only relatively recent Windows 10 PCs will be eligible to upgrade to 11 because of Microsoft’s strict component requirements. To find out if yours meets the standards, check out our guide to whether your PC can run Windows 11.

there is a workaround – but it has downsides, so your best bet is probably to suck it up and buy a new PC that ships with the OS pre-installed.

Microsoft’s recently updated Surface range are among the first to do so, with the Surface Pro 8, Surface Go 3, Surface Pro X and Surface Laptop Studio all announced this September and shipping with Windows 11.

Over the next few months, expect plenty more OEMs (original equipment manufacturers) to launch Windows 11-powered PCs. Acer, Asus, Dell, HP, Lenovo and Samsung all featured in the Windows 11 trailer, so look out for at least some third-party hardware before 2023 is out, and Honor has already announced the Windows 11-powered MagicBook V 14. Eventually, all Windows 10 PC makers will likely transition to Windows 11.

Yes. On the official Lifecycle page, Microsoft has confirmed that Windows 10 Home and Pro will continue to be supported until 14 October 2025 – that’s over a decade after both first launched.

This includes a 21H2 feature update, although there will only be a handful of minor new features. However, this won’t be the last Windows 10 gets – Microsoft has revealed that “the next Windows 10 feature update is slated for the second half of 2023”.