Trending March 2024 # Official Jelly Bean Android 4.1.1 Ota Jro03C For Galaxy Nexus Us Hspa+ Variant # Suggested April 2024 # Top 7 Popular

You are reading the article Official Jelly Bean Android 4.1.1 Ota Jro03C For Galaxy Nexus Us Hspa+ Variant updated in March 2024 on the website Bellydancehcm.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested April 2024 Official Jelly Bean Android 4.1.1 Ota Jro03C For Galaxy Nexus Us Hspa+ Variant

Google has started the official rollout of the Jelly Bean Android 4.1.1 update (build number JRO03C) for Galaxy Nexus devices – starting with the HSPA+ Galaxy Nexus variant in the US (the GSM variant sold directly by Google in the US – just a day after releasing the source for Jelly Bean.

However, the OTA update is rolled out gradually to more and more devices, so in case you don’t want to wait for your device to get it, you can manually update to the OTA release by using the guide below.

—- Important! Read the points below —

The manual method of updating needs you to have a device with an unlocked bootloader and ClockworkMod recovery installed. If you have a fully stock and unlocked Galaxy Nexus, you should wait for the OTA update from Google officially.

You need to be on either the IMM76I Android 4.0.4 build or the preview JRN84D Jelly Bean build in order to update manually as this is an incremental ROM. There are two different files for updating from either version, so make sure to select the correct version depending on your current build.

This guide and ROM is for the unlocked GSM variant of the Galaxy Nexus in the US and won’t work for the international variants or the Verizon/Sprint variants.

— Important! Read points above —

Now, let’s take a look at how you can manually update your GSM Galaxy Nexus (US variant) to the official OTA Jelly Bean release.

Compatibility

This ROM and the guide below are compatible only and only with the US GSM Galaxy Nexus. It’s not compatible with the international or Sprint/Verizon variants or any other device. Check your device model in Settings » About phone.

Warning!

The methods and procedures discussed here are considered risky and you should not attempt anything if you don’t know completely what it is. If any damage occurs to your device, we won’t be held liable.

How to Install Official Jelly Bean ROM on US GSM Galaxy Nexus Variant

[Important] Make sure your device has an unlocked bootloader and ClockworkMod recovery installed.

Now, on your phone, go into Settings » About phone, and check what it says under Build number on the bottom. It must be either IMM76I or JRN84D. Then, download the corresponding file below in order to update.

If build number is IMM76I:  Download Link

If build number is JRN84D:  Download Link

Copy the downloaded zip file to the SD card on the phone (do not extract it).

Turn off the phone and boot into ClockworkMod recovery. To do this, press and hold the Volume Up + Volume Down + Power buttons together till the screen turns on. Then, scroll to the Recovery mode option using the volume buttons, then select it using the Power button to restart in recovery.

Select install zip from sdcard, then select choose zip from sdcard, then select the file transferred to the SD card in step 3. Confirm installation on the next screen by selecting Yes.

After installation is complete, select go back then select reboot system now to reboot the phone and boot up into the official Jelly Bean Android 4.1.1

Congratulations! You have successfully updated to the official Android 4.1.1 Jelly Bean OTA release on your Galaxy Nexus. Enjoy!

You're reading Official Jelly Bean Android 4.1.1 Ota Jro03C For Galaxy Nexus Us Hspa+ Variant

Android 4.1.1 Jelly Bean Ota Update Leaked For Bell Galaxy S3 (Sgh

Samsung must be pushing the carriers in the US (and Canada) pretty hard to get the Android 4.1 Jelly Bean update out to the public for the Galaxy S3 as soon as possible, instead of taking a long time as was the case with previous devices. With two official Jelly Bean firmware leaked for the T-Mobile Galaxy S3, and not to mention numerous leaks for the international Galaxy S3, now a Jelly Bean Android 4.1 OTA update – having the firmware version MVLALI1 – has leaked for the Canadian Bell Galaxy S3 variant (model number i747M).

“You can find the latest Jelly Bean update leak for the international Galaxy S3 → here, and the T-Mobile one → here.”

With Android 4.1 being quite an important update, mostly due to the performance and smoothness improvements as well as the new Google Search experience, many will be wanting to try it out. The guide below will walk you through the steps to update to the leaked Jelly Bean OTA update with step-by-step instructions, so that you can get a taste of the official Android 4.1 update on your Bell Galaxy S3 before the final update actually rolls out.

However, considering this is a leaked pre-release update and is not being officially rolled out by Bell/Samsung, it may have issues and some things might not work properly. It might not be stable enough for every day use, so if you aren’t comfortable with trying leaked pre-release firmware, you should wait for the official update.

Now, let’s take a look at how the MVLALI leaked official Jelly Bean OTA update can be installed on the Bell Galaxy S3. Be sure to read the instructions carefully.

Compatibility

This guide below is compatible only and only with the Bell Galaxy S3, model number SGH-i747M. It’s not compatible with any other Galaxy S3, it only works for Bell variant. Check your device’s model in Settings» About phone.

Warning!

The methods and procedures discussed here are considered risky and you should not attempt anything if you don’t know completely what it is. If any damage occurs to your device, we won’t be held liable.

How to Install Jelly Bean Android 4.1 OTA on Bell Galaxy S3

[Important] Flash the stock MVLALH1 firmware on your phone by following the guide → here. The update will fail to flash on any other firmware or on custom ROMs. Keep in mind that this may require you to wipe data on your phone, so be sure to make a backup (see step 1). Also, if you are already on the MVLALH1 firmware (check in Settings » About menu), you can skip this step.

Copy the SGH-I747M_I747MVLALI-OTA-I747MVLALH_BMC_322447427.zip file to the internal storage on your phone.

In recovery, use the volume buttons to scroll up/down and the home button to select an option.

Select apply update from sdcard (or apply update from internal storage), then scroll to and select the SGH-I747M_I747MVLALI-OTA-I747MVLALH_BMC_322447427.zip file to start installation of the Jelly Bean OTA update.

After installation is complete, the phone should reboot automatically. If it does not reboot, go back to the main recovery menu and select reboot system now to boot up into the newly installed Android 4.1.1 Jelly Bean.

NOTE: To go back to ICS Android 4.0, you can flash the MVLALH1 firmware by following the guide linked in step 2 above.

The leaked official Jelly Bean Android 4.1 firmware is now up and running on your Bell Galaxy S3. Use it, go through what’s new and what’s changed, and do let us know what you think!

Android 4.1.2 Jelly Bean Update For Samsung Galaxy Note N7000 In India

Samsung said we’ll see the Android 4.1 Jelly Bean update for the Galaxy Note in March, and they’ve been true to their word this time around. The Korean manufacturer has now started rolling out the official Jelly Bean update in India, which upgrades the device to Android 4.1.2 Jelly Bean with build number DDLSC.

Android 4.1 is an important update for many reasons. First and foremost, it features “Project Butter”, which provides a much faster and smoother interface and operation compared to previous versions of Android. Using the processor and GPU in tandem along with techniques such as Vsync, triple buffering, and touch anticipation, Project Butter keeps the interface running at 60 fps and results in a smooth and responsive experience.

Other new features in Jelly Bean include the expandable and actionable notifications, Google Now search assistant that provides users with information before they even look for it, offline voice typing, faster browsing performance, better accessibility features, and a range of other small yet useful tweaks that put Android 4.1 leaps and bounds ahead of Android 4.0 Ice Cream Sandwich.

But the biggest change of all is that Samsung has completely replaced its old user interface and slapped on the Nature UX found on newer devices like the Galaxy S3 or Note 2. It’s a major revamp and brings along some very useful features from Samsung’s latest iteration of TouchWiz, such as multi window multitasking, pop-up video play, and many more, along with a radically different visual look.

The new TouchWiz features and improvements in the update include:

Multi-View (Multi Window Multitasking, same as in Note 2)

Multi-View can also be disabled

Page Buddy

Notification Panel can now be customized

New Additions in Notification Panel

Smart Rotation (Screen Display adjusts to your angle of sightings)

Continuous Input in Samsung Keyboard (Like Swipe or Android 4.2 Keyboard)

Samsung’s Cloud services

Features like Direct Call, Smart Stay and Pop-up Play

New Widgets From the Galaxy S3

2 Home screen modes

New Notifications bar

While the update is rolling out over the air, the firmware for the update is available for manual download as well, so that you can update right away without waiting. Furthermore, thanks to XDA member ThaiDai, there is also a rooted custom version of the Android 4.1.2 firmware, installable as a custom ROM using a custom recovery.

However, keep in mind that manually updating, especially if you’re on a custom ROM, might require you to factory reset your device, and while apps and personal data can be backed up and restored, things like your Google account will need to be re-entered. If you aren’t okay with that, it is best to wait for the over the air update to arrive on your phone.

Now let’s see how we can install either the official Android 4.1.2 firmware or the custom rooted version on the Galaxy Note.

Compatibility

The procedure described below is only for the Samsung Galaxy Note, model number N7000. Do not try it on any other device, not even on the LTE/US variant of the Galaxy Note.

Warning!

The methods and procedures discussed here are considered risky, so try them out at your own risk, and make sure to read each step carefully before attempting anything. We will not be held responsible if anything goes wrong.

Official Android 4.1.2 Firmware (DDLSC)

This is the full official firmware that has been released by Samsung and won’t make any unofficial modifications on the phone. Use it if you want to update to the official Android 4.1.2 manually. If you want a pre-rooted version of the firmware, follow instructions for that given after the official firmware instructions.

Download Link

Extract the file downloaded in step 3 on the computer to obtain a file named N7000DDLSC_N7000ODDLSC_N7000DDLS6_HOME.tar.md5 (the file name may end at .tar, which is normal). This is the actual firmware file that we need to flash on the phone.

Extract the contents of the Odin3_v3.04.zip file to a folder on your computer.

If your phone is rooted, perform the following steps before moving on to step 8 (skip this step if your device is not rooted), to retain root access after the update.

Download OTA RootKeeper from the Play Store. .

Now, turn off your phone and wait for it to shut down completely.

Then, put the phone into download mode. To do so, press and hold these keys together: Volume Down + Home + Power till the phone turns on and shows a Warning!! screen. Then press Volume Up to enter download mode.

Important! Connect your phone to PC now. You should get the message “Added !!” under Odin’s message box in the bottom left.

If you don’t get this message, make sure you installed drivers correctly (using Kies or directly) as given in step 2. If it still doesn’t work, try changing to another USB port on the computer and also use the USB ports on the back if you have a desktop PC.

Important! Do not make any other changes in Odin except selecting the required files as given in step 11. Leave all other options as they are. Make sure Re-Partition check box is not selected.

What do if Odin gets stuck or doesn’t do anything: If ODIN gets stuck on setup connection or at any stage of this process after you’ve hit the Start button, and doesn’t seem to be doing anything, or if upon completion of the process you get a FAIL message (with red background) in ODIN, do this: disconnect the phone from the PC, close ODIN, remove battery for 4-5 seconds, re-insert it, turn phone on in Download mode again, and do the procedure again from Step 10.

[Important] What to do if phone doesn’t boot: After you get the PASS message and the phone reboots, the phone might get stuck at the booting animation. If that happens, perform the following steps to make it boot. Remember that these steps will wipe your personal data like contacts, apps, messages, etc. If your phone has already booted, stop reading the guide here, your phone has been updated successfully:

Boot to recovery mode — for which, first power off phone (by removing battery and reinserting it), wait for 5-6 seconds, and then press and hold Home + Volume Up + Power keys together till the screen turns on, then let them go to boot into recovery. Once you are in recovery mode, use volume keys to move the selection up and down and home/power key to select the option.

Go to Wipe data/Factory Reset and select it. Select Yes on next screen.

Then, select reboot system now to reboot the phone, which will now boot properly.

If you run into any roadblocks while flashing the firmware, let us know and we’ll help you out.

Custom Rooted Android 4.1.2 Firmware

This is a custom version of the official firmware. It is rooted, and comes in two versions – one is the full unchanged (apart from root) version, while the other is a small version which has some of the stock apps removed. You can flash either one following the instructions below.

Part I: Download ROM

Download the latest version of either the Full or Small version of the ROM from the source page.

Then, copy the ROM’s file to the internal storage on the phone. Don’t extract the file, copy it as it is.

PART II: Flashing Safe Kernel

Since Ice Cream Sandwich-based stock kernels can brick the device while wiping data (required for installing the ROM), we’ll flash a safe kernel which doesn’t have this issue before installing the ROM. This will also install a custom recovery (ClockworkMod) which we need to install the ROM.

Filename: CF-Root-SGN_XX_OXA_LC1-v5.3-CWM5.zip

DO NOT extract the .tar file (this might show up as a zip file as well, but do not extract it). You need to flash the .tar file using Odin to gain root access and install ClockWorkMod Recovery (CWM) alongside. (If you’re getting a zImage file, it means you’ve extracted the .tar file too! — and that’s not a right thing to do. Use 7-zip to extract.)

Extract the contents of the Odin 1.85.zip file to a folder.

Disconnect your phone if it’s connected to PC, then switch it off.

Now, put the Galaxy Note in Download Mode — press and hold these keys together: Volume Down + Home + Power. A Warning! screen will come up; press Volume Up key to continue to enter Download Mode.

Important! Do not make any other changes in Odin except selecting the required file as given in step 9. Leave all other options as they are.

If you don’t get this message, then probably there is a problem with drivers. Make sure you’ve proper drivers installed (check step 1). Also, uninstall Kies from the Control Panel as well (this will leave the drivers on the computer but remove Kies which can interfere with the procedure).

Now, hit the START button to start flashing of CF-Root kernel on your Galaxy Note. When the flashing is complete, your phone will automatically reboot — and when you see the Samsung logo, you can safely unplug the cable. Plus, you’ll get a PASS (with green background) message in the left-most box at the very top of the Odin.

What to do if Odin gets stuck: If ODIN gets stuck and doesn’t seem to be doing anything, or you get a FAIL message (with red background) in ODIN, disconnect the phone from the PC, close ODIN, remove battery, re-insert it, turn phone on in Download mode again, and do the procedure again from Step 8.

[Important] The phone will get stuck on the boot screen now. Now, disconnect the phone, remove its battery,  re-insert it, but DO NOT turn it on yet. Go to the next part of the guide.

Part III: Installing the ROM

In recovery, use the Volume buttons to navigate and the power button to select items.

Select wipe data/factory reset, then select Yes on next screen to confirm. Wait a while till the data wipe is complete.

Select install zip from sdcard, then select choose zip from sdcard. Scroll to the ROM file on the sdcard and select it. Confirm installation by selecting Yes on the next screen.

After the installation is complete, select Go back then select reboot system now to reboot the phone and reboot into the rooted Android 4.1.2 ROM.

Via: Sammobile

Galaxy S3 Jelly Bean Update: I9300Xxdli8

Here’s a nice Sunday treat for Galaxy S3 owners, though most probably will be irritated more than be happy, as another official Android 4.1 Jelly Bean OTA update has leaked for the Galaxy S3, this time with firmware version XXDLI8, continuing the saga of leaked updates for the device as we wait for the Jelly Bean update to be officially released (which is slated for October).

“If you have the T-Mobile Galaxy S3, you can try out its leaked Jelly Bean firmware → here. Bell Galaxy S3 (i747M) owners can try out the leaked Jelly Bean update → here. Galaxy Tab 2 10.1 Jelly Bean leak can be found → here, while Galaxy Tab 2 7.0 leak can be found → here.”

Like always, we have a guide ready that will help you flash the latest Jelly Bean update on your Galaxy S3, with step-by-step instructions. You will need to have a microSD card inserted into the phone to be able to update.

Keep in mind that this is a leaked pre-release firmware and has not yet been officially released by Samsung and hence could have some issues, so you should wait for the official update to come out if you’re not comfortable with manual flashing. But if still try it out, you can always flash back to an Android 4.0 firmware later if needed, which will enable you to get official updates from Samsung again.

Let’s take a look at how you can install XXDLI8 Jelly Bean Android 4.1 update on the Galaxy S3.

Compatibility

This guide to install Android 4.1 Jelly Bean firmware is compatible only and only with the international Galaxy S3, model number i9300. It’s not compatible with the US variants or any other device. Check your device’s model number in: Settings » About phone.

Warning!

The methods and procedures discussed here are considered risky and you should not attempt anything if you don’t know completely what it is. If any damage occurs to your device, we won’t be held liable.

[Important!] Flash the stock XXBLG8 firmware on your phone by following the guide → here. The update will fail to flash on any other firmware or on custom ROMs, as it needs the phone to be on the XXBLG8 firmware. Keep in mind that this may require you to wipe data on your phone, so be sure to make a backup (see step 1).

Copy the GT-I9300_I9300XXDLI8-OTA-I9300XXBLG8_BTU_297718496.zip file to the external storage i.e the microSD card on your phone.

In recovery, use the volume buttons to scroll up/down and the home button to select an option.

Select apply update from external storage, then scroll to and select the GT-I9300_I9300XXDLI8-OTA-I9300XXBLG8_BTU_297718496.zip file to start installation of the Jelly Bean OTA update.

After installation is complete, the phone should reboot automatically. If it does not reboot, go back to the main recovery menu and select reboot system now to boot up into the newly installed Android 4.1.1 Jelly Bean firmware.

The latest leaked Jelly Bean OTA update is now installed on your Galaxy S3. Do let us know how it works for you and the things you notice in the firmware (like bugs, improvements or new features).

If you wish to, you can also try out few custom Jelly Bean ROMs for the Galaxy S3 → here.

Update At&T Galaxy Note To Jelly Bean With Slim Bean Custom Rom

The Galaxy Note is a big phone, but that doesn’t mean the software powering it has to big as well. The AT&T Galaxy Note has received a port of the slimmest custom ROM around – Slim Bean, based on Android 4.1 Jelly Bean.

Slim Bean is a bare-bones ROM that is very light on resources and very small in size, as it strips all the useless stuff and provides a slim and light pure Android experience, with no bloatware. That’s not to say it is completely bare, as it also includes useful customization options, and also provides over the air addons which let you add more functionality as you see fit.

Keep in mind that this is not an official Samsung ROM. It’s a custom ROM that is under development and may have a few bugs and issues, and some things may not work properly and some stock Samsung ROM features will not be available.

Let’s see how Slim Bean ROM can be installed on the AT&T Galaxy Note.

Compatibility

This firmware and the guide below is compatible only and only with AT&T Galaxy Note, SGH-i717. It’s not compatible with any other device, including international version N7000. Check your device’s model number in Settings » About phone.

Warning!

The methods and procedures discussed here are considered risky and you should not attempt anything if you don’t know completely what it is. If any damage occurs to your device, we won’t be held liable.

How to Install Slim Bean ROM on AT&T Galaxy Note

[Important] You must use TWRP recovery to install this ROM. Install TWRP recovery by using the guide → here.

Download the latest version of the ROM from the source page.

Copy the two zip files downloaded in step 3 and 4 to the SD card on the phone.

Turn off the phone. Then, boot into TWRP recovery. To do this, press and hold the Volume Up + Volume Down + Power buttons together. When the screen turns on, let go of the Power button, but keep holding the volume buttons till you enter TWRP recovery.

Perform a full backup of your existing ROM, so that you can always restore it from recovery if something does not work out with this ROM. To perform a backup, tap on Backup, then slide the blue circle button at the bottom to the right to start backing up your current ROM. Go back to main recovery menu after backup is complete.

Select Install, then browse and select the ROM file you downloaded in step 3 above. Confirm installation to flash it.

After installation of ROM is complete, repeat step 9, but this time select the slim_gapps.zip file to flash the Google apps package. Confirm again so that gapps are flashed.

After the installation is complete, select Go back then select reboot system now to reboot the phone and boot up into Slim Bean ROM. The first boot will take some time, up to 5 minutes.

To add features like Google Now or other missing apps, go into Settings » OTA and download and install the features you want.

NOTE: If you want to go back to your previous ROM, boot into recovery (as given in step 6), select backup and restore then restore your previous ROM by selecting it from the list.

Also try out a few other Jelly Bean ROMs for the AT&T Note → here.

Samsung Galaxy Note Official, Hd Super Amoled In Tow

Samsung Galaxy Note Official, HD Super AMOLED in Tow [Updated with Video]

This week Samsung revealed several new devices at their “Unpacked” event in Berlin at IFA 2011, perhaps the most impressive of these being the Samsung Galaxy Note. This device is what Samsung will be promoting as the ultimate single device for all of your mobile needs, bridging the gap between smartphone and tablet, with a size that’s small enough to fit in your pocket yet large enough and brilliant enough to provide you with any and all of your interactive screen-based needs. In addition, this is the first device on the market to feature such a brilliant resolution and brightness with Samsung’s own brand new “HD Super AMOLED” at 1280×800 pixel WXGA resolution, 285ppi that is, on a cool 5.3-inch display – a new level of WOW factor at play in the Galaxy Note for sure.

No longer will you need (nor will you want) to carry along a phone, a tablet, a camera, a notepad, pen, and paper, nay! Now you’ve got the Samsung Galaxy Note – not stuck in one category as a smartphone or a tablet, this device is being marketed (very intelligently) as its own entity. Inside you’ll find a 1.4 Ghz dual-core processor, 1GB of RAM, and the most current handset-optimized Google mobile OS Android 2.3 Gingerbread. On the back you’ll find an 8 megapixel camera with LED flash, on the front is a 2 megapixel camera for video chat, and the entire device weighs in at 178 grams and is 9.65mm (0.37-inch) thin. Samsung will be releasing this device in at least two configurations, those being LTE and HSPA+ connectivity options.

What this device’s existence represents is Samsung’s extensive research into the ideal balance point for portability, ease in use, and a wholly optimized on-the-go experience for both everyday consumers and enterprise users. The largest screen size possible while ensuring a smartphone’s portability. Consolidation is the name of the game, this device taking a slew of ideal situations, including the analog pen and pad classic form of taking notes, and adding them all together to come up with this one perfect blend.

And what about the “Note” bit exactly, then? Is there actually a stylus? Why yes there is! And with a silo inside the device so that you might store the stylus while you’re not using it. You’ll find from our hands-on look at this device that this is the most responsive and best-laid bit of stylus technology yet laid down on an Android tablet. There’s a single button on the pen that’ll activate several features, the one we’re of course most interested in being a hold down and double-tap activating a screen-grab. The Samsung S Memo app (included out of the box, of course) supports photo, voice, text, handwriting, and drawing capture, all of it working with your regular Android sharing options for optimal cloud-working experience. Finally, the pen takes stylus working to a new level as you’re able to use it for all manner of activity, not just drawing. Open apps, flip through pages, and write in text to still frames amongst a whole slew of other awesome new features.

Get to know this device twice as well soon here on SlashGear as we post our hands-on look at the device straight from Berlin!

Then continue to follow along with us LIVE for the rest of the Samsung Unpacked event at IFA 2011 for total coverage of every Samsung device we’ll be marveling over for weeks and months to come. Also stay tuned to SlashGear for our hands-on look at the devices we’ve revealed from Samsung today, and get ready to take em out a whole new door!

Update the detailed information about Official Jelly Bean Android 4.1.1 Ota Jro03C For Galaxy Nexus Us Hspa+ Variant on the Bellydancehcm.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!