You are reading the article Not Everyone Understands Apple Watch, And That’s Just Fine updated in December 2023 on the website Bellydancehcm.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested January 2024 Not Everyone Understands Apple Watch, And That’s Just Fine
When Apple announced the Apple Watch, I knew I wanted one. In fact, when Motorola announced the Moto 360, I wanted one of those too. If it had been compatible with iOS without any tricks or hacks, then I might have even bought one. It’s probably safe to say that the idea of a smartwatch appeals to me greatly.
But since the announcement of pricing for the Apple Watch I have found myself in conversation with more than a few people who just don’t seem to get why the Apple Watch is so exciting to some of us. It’s expensive, they say. It doesn’t do anything that your iPhone doesn’t do, they point out. You just don’t need it.
And they’re right on all counts. It’s far from cheap, even in its Apple Watch Sport incarnation. Our iPhones do, bar some of the health stuff, exactly what this newfangled watch will do. And no, I don’t desperately need one. But I do want one.
People not understanding what makes me tick about the Apple Watch is fine though. In fact, it’s much higher on the ‘fine’ scale than that awful pun. After all, it just wouldn’t do for us to all be the same now, would it?
When everyone was buying thick, heavy mobile phones because they had the best cameras in, I just didn’t understand why. I didn’t want to take photos with a phone. The idea was just stupid.
When smartphones were just starting to put in an appearance, long before the iPhone, I wanted the smallest, thinnest and lightest dumb phone Nokia had to offer. I had a computer for computer-y things. Why would I want to do them on a phone?
Of course, these days all the mobile phones we are interested in are of the smart variety, and camera capabilities are very much at the top of anyone’s list of requirements when making a purchase. My iPhone 6 is my one and only camera, and I wouldn’t have it any other way.
In case you were wondering, there is indeed a point to this little trip down memory lane. My point is a simple one, and it is that times change, Technology changes, and more importantly, our uses for that technology change along with it. What smartwatches can do today pales into insignificance when compared with what they will be doing tomorrow. I don’t think we have even scratched the surface with what we will be using the Apple Watch for once developers get their teeth into it properly, and that’s what excites me. I get giddy not for what the Apple Watch will do come April 24th, but what it will be doing come six months down the line. Or twelve months. Or five years.
After all, look at the iPhone back in 2007. Eight years later, compare that with what we have now and how we use it. They can’t, and shouldn’t be compared.
So with that in mind, just imagine what the Apple Watch will be doing in 2023.
We might live in the future, but there’s always more of it around the corner. I can’t wait to see what it has to show us, and I think it might just be smartwatch-shaped.
You're reading Not Everyone Understands Apple Watch, And That’s Just Fine
Apple Watch Not Connecting To Wi
We can’t deny the fact that the Apple Watch is an impeccable result of tech-perfection. However, it is always relied on numerous third-party-reasons to perform seamlessly. One such reason is ‘Connectivity.’ ‘Connecting to Wi-Fi’ error can be called one of the most common reasons hindering our gadget’s performance. Understanding that there can be different explanations behind it, finding the root cause can prove tedious. Let’s try to learn more about the error and explore possibilities to rectify them.
Why Won’t My Apple Watch Connect to the Wi-Fi?It’s difficult to point out the exact reason behind the Wi-Fi network error on your Apple Watch. But such an issue may occur if,
Your Apple Watch isn’t updated to the latest watchOS.
The Wi-Fi network you’re trying to connect has poor connectivity strength.
There’s a problem with your Wi-Fi router or modem.
How to Fix Wi-Fi Issues on Apple WatchCan you relate to any of these errors? If not, don’t worry, we would suggest you try the error-fixers mentioned below one after another. We are pretty sure that one of these will surely help you get over the Wi-Fi not working stage.
1. Compatible Wi-Fi for Apple Watch
It may sound weird, but your Apple Watch can only connect to an 802.11b/g/n 2.4GHz Wi-Fi Network. If the network you’re trying to connect doesn’t match these standards, your watch might not connect and report an error.
2. Turn Off Mirror iPhone Feature
When Mirror iPhone is enabled, and both your Apple Watch and iPhone are in Bluetooth range, turning on Airplane Mode on one device will make another to follow the same. So if your iPhone is on Airplane Mode, your Apple Watch should have it enabled. And that might be the reason you’re not able to connect to Wi-Fi. To turn this feature off,
Launch the Watch app on your iPhone.
Go to the General section.
Select Airplane Mode.
Toggle off Mirror iPhone.
After disabling it, try connecting to the Wi-Fi network.
3. Turn Wi-Fi OFF/ON
Switching Wi-Fi on and off is the quickest way to fix this issue. At some point, it may seem silly, but doing it actually removes minor issues in the Wi-Fi system and freshen your watch’s ability to perform wireless functions.
After turning it off, then on, try connecting to a network and check if it’s working.
4. Forget a Wi-Fi Network and reconnect
To do so on your Apple Watch,
Swipe up on the watch face.
Press and hold the Wi-Fi icon.
Tap on the Wi-Fi network you’re trying to connect.
Scroll down and tap Forget This Network.
Tap Forget to confirm.
Now, turn Wi-Fi off, then on again.
Tap on the same network to reconnect.
Enter the security password using your iPhone’s keyboard or gestures on your watch.
Check if you’re able to connect. If not, try another hack!
5. Restart Apple Watch and iPhone
Restarting both devices should fix the issue.
Press and hold the side button of your device screen.
Slide to power off the watch.
Hold down the side button again to switch on.
If still not working, move to another workaround.
6. Enable or Disable Airplane Mode
Turning on the Airplane mode is an effective way to troubleshoot minor software issues and network errors on your device. And it can also fix the Wi-Fi connection error.
Open the Settings app on your watch.
Tap Airplane Mode.
Toggle on Airplane Mode.
Now that it is on, restart your Apple Watch.
Visit the same Airplane Mode settings and toggle it off.
Press the Digital Crown to get back to the main screen.
Now, switch on Wi-Fi and connect to the Wi-Fi network. If not working, you should try your hands on another workaround.
7. Reset Your Apple Watch
If your watch still doesn’t connect to Wi-Fi after resetting your modem and trying all the workarounds, you can go ahead with this step. Before proceeding, make sure you’ve backed up all your watch data.
Open the Settings app on your watch.
Go to General.
Scroll down and tap Reset.
Tap Erase All Content and Settings.
Tap Erase All to confirm.
This can also be done from the Watch app on your iPhone. Launch the Watch app → My Watch → General → Reset settings → Tap Erase Apple Watch Content and Settings.
Let your Apple Watch complete the resetting process and restore the factory default settings. When it’s done, restart your Apple Watch and pair it with your iPhone. Once set up and paired, try connecting to Wi-Fi and check if it’s working.
Signing Off
Author Profile
Sagar
Apple Introduces Iphone 6 And Apple Watch
As rumored, Apple today took the wraps off two new iPhones during a streamed media presentation in Cupertino, Calif.
The iPhone 6 and iPhone 6 Plus boast a new Retina HD screens. “Not any display would do,” said Schiller. Compared to the 4-inch screen on the iPhone 5S, the iPhone 6 sports a 4.7-inch display with a resolution of 1334 pixels by 750 pixels.
The larger, phablet-sized iPhone 6 Plus has a 5.5-inch screen with a resolution of 1920 pixels by 1080 pixels, which translates into over 2 million pixels, 185 percent more than the iPhone 5S, noted Schiller. Both models feature a glass front that curves slightly around the edge.
Highlights include iOS 8, an updated 8 megapixel iSight camera and a faster A8 64-bit processor with 2 billion transistors that is “50 times faster than the original iPhone,” said Schiller. Connectivity is enhanced with a 150 Mbps LTE and a Wi-Fi Calling feature that “seamlessly” hands off to cellular networks. In the U.S., T-Mobile will support Wi-Fi calling.
Eddie Cue, senior vice president of Internet Software and Services at Apple, later showed off the company’s mobile payments solution, Apple Wallet. A combination of near-field communication (NFC) technology, Touch ID, a Secure Element chip and specialized software, the Apple Wallet integrates with Passbook to enable secure payments with retailers and select e-commerce apps.
Cue assured that his company will respect the privacy of Apple Wallet users. “The transaction is between you, the merchant and your bank,” he said.
The iPhone 6 and iPhone 6 Plus go on sale on Sept. 19. iPhone 6 prices start at the $199 for the 16 GB model and top out at $399 for the 128 GB version. The 5.5-inch iPhone 6 Plus prices start at $299. Preorders for both models start on Sept. 12.
Apple Watch
The event’s “one more thing” was the long-rumored iWatch, or as the company is branding it, the Apple Watch. Available in two sizes, the wearable “works seamlessly with iPhone,” said Cook. It also serves as a “comprehensive health and fitness device,” he added.
Apple Watch pushed the company to explore new interface and device interaction models. “What we didn’t do is take the iPhone and shrink the user interface,” said Cook.
The touch-capable, sapphire-enhanced display is complemented with a “digital crown” that contains infrared LEDs. Users can press and twist the dial to zoom and otherwise navigate the Apple Watch UI. A rear sensor monitors a user’s heart rate. It also features integration with Apple Pay for mobile payments.
To get developers on board, Apple is making available a software development kit (SDK) called WatchKit to extend iPhone apps to the device. Apple watch requires the iPhone, said Cook, before revealing that the smartwatch is backward compatible with iPhone models stretching back to the iPhone 5.
Apple’s wearable will be available in three versions, the base Apple Watch, the Sport and the 18 karat gold Edition. A range of interchangeable watch bands, from leather to sweat-resistant plastic to an array of metals, add an additional touch of personalization.
Prices start at $349. Apple Watch is scheduled to ship in early 2023.
Pedro Hernandez is a contributing editor at InfoStor. Follow him on Twitter @ecoINSITE.
How To Fix Dictation Not Working On Iphone, Ipad, Apple Watch, And Mac
Dictation lets you enter text using your voice instead of typing on the keyboard. It’s also known by other names like talk to text, voice to text, or speech to text. However, sometimes the dictation microphone icon may be missing on the keyboard or it may not convert what you speak into text.
If dictation isn’t working on your iPhone, iPad, Apple Watch, or Mac, here are some reliable solutions to fix the problem.
Fix dictation not working
Connect to Wi-Fi or Cellular
You can use dictation offline on iPhone 6s and later. However, not all dictation languages work without being connected to the internet. So, for best results, make sure your iPhone or iPad is connected to Wi-Fi or cellular data.
Plus, when you select a new dictation language (or immediately after setting up your iPhone), you will have to connect to Wi-Fi for support files to download.
Enable and disable Airplane Mode
Go to the iPhone or iPad settings app and enable Airplane Mode. After waiting for around 15 seconds, tap the same toggle to turn off Airplane Mode.
Force quit the app in question and reopen it
If dictation isn’t working in a particular app, force close and reopen it. After that, tap the microphone key on the iOS keyboard and try to use dictation. It should input what you speak.
Restart your iPhone
When dictation is not working on iPhone, or it comes and disappears from the screen, simply turn off your iPhone and turn it back on. It’s an important fix. So, make sure you don’t skip it.
Disable and re-enable dictation to refresh it
Follow these steps to turn off and turn on dictation which should ensure it starts working correctly. This particular step will help you verify if you had enabled dictation in the first place or not!
Open iPhone, iPad, or iPod touch Settings and tap General.
Tap Keyboard.
Wait for a few seconds and restart your iPhone.
Now, open the Apple Notes app, tap the microphone icon on your keyboard, and dictation should work like a charm.
Turn off extra dictation languages
If you’re bilingual or multilingual, you might have added more than one keyboard to your iPhone. After that, you’ll see a Dictation Languages option appear below the Enable Dictation toggle. Tap it and uncheck all the languages except one. Now, restart your iPhone and try using dictation. It should work as expected.
Once that’s done, you can check more dictation languages if you want to use them. In case doing so starts causing dictation problems again, update your iPhone.
Important: Make sure you select the right accent for the same language. For example, if I’m from India, for best results, I should select English (India) as my dictation language instead of English (US) or English (UK).
Dictation option missing in iPhone Settings?
If you don’t see the Enable Dictation option in the steps above, follow these two fixes:
Add iOS keyboardYou will lose Apple’s dictation feature if you add just a third-party keyboard (like SwiftKey) and remove the built-in Apple keyboard. To see the Enable Dictation option in iPhone keyboard settings, do the following:
Choose a keyboard under Suggested Keyboards or Other iPhone Keyboards.
Now go back and you should see the Enable Dictation option. If not, restart your iPhone.
Note: Some third-party keyboard (like SwiftKey) may also offer their own dictation feature. You can use that while using the third-party keyboard.
Unrestrict Siri & DictationFollow these steps to ensure dictation is not restricted:
Open iPhone or iPad Settings and tap Screen Time.
If it says, Turn On Screen Time, you can skip all the steps below. Else, tap Content & Privacy Restrictions.
If Content & Privacy Restrictions is disabled, you can skip the steps below. If it’s enabled, tap Allowed Apps.
Under Allowed Apps, make sure Siri & Dictation is enabled.
You should see the Enable Dictation option after adding the iOS keyboard and ensuring dictation isn’t restricted.
Try using dictation without AirPods or earphones
At times, you may not be able to use dictation at all, or it may function poorly with wired or wireless earphones. If it isn’t working at all, make sure your iPhone isn’t stuck in headphone mode.
Remove iOS keyboard and add it again
Here’s how you can remove the iPhone keyboard and re-add it to ensure dictation works:
Tap Add New Keyboard and select your desired iPhone keyboard. Now, open Notes or a similar app and use dictation. It should work well.
Turn off Siri and turn it back on
Siri and dictation are related. So, if dictation isn’t working after following the above solutions, turn Siri off and on.
Go to Settings and tap Siri & Search.
Turn off Listen for “Hey Siri” and Press Side (or Home) Button for Siri.
Restart your iPhone.
Enable Siri again by turning on the switches you turned off in step 2.
Clean iPhone’s microphone
If your iPhone’s microphone grills are dirty, it can cause blockage, which causes poor experience on calls, Siri, voice recordings, dictation, and other related things. To fix this, make sure you remove any iPhone case and use a cloth, dry brush, or toothpick to clean the microphone holes.
Important: If any external device (like earphones) is attached to your iPhone, disconnect it to ensure the on-device mic is used.
Reset network settings or all settings
In case the dictation problem continues, reset your iPhone’s network settings. This should help, and if it doesn’t, you can reset all settings. Here’s how to do both.
Finally, if nothing helps, contact Apple Support or take your iPhone to an Apple Store and get it inspected. If there are issues with the iPhone hardware, they will take care of it.
Fix dictation not working on Apple Watch
When dictation isn’t working on your Apple Watch, follow these basic fixes first:
Restart your Apple Watch
Make sure your watch is running the latest version of watchOS
Check for Siri and Dictation restriction on iPhone (mentioned above)
Clean the Apple Watch for a perfect microphone experience and remove any full body case or cover
Besides the above checks, follow these solutions to fix dictation not working on Apple Watch.
Make sure Apple Watch is connected to Wi-Fi, Cellular, or the iPhone
Your Apple Watch can connect to the internet via Wi-Fi, Cellular (on cellular models), or use the iPhone’s internet. We have explained more in this interesting post titled how to know whether your Apple Watch is connected to the internet or not. Dictation should work flawlessly once Apple Watch has internet connectivity.
Enable dictation on Apple Watch
Do you see “Dictation Disabled. You can enable dictation in Settings” on your Apple Watch? Here’s how to enable (or check) dictation on Apple Watch:
Open the Settings app on Apple Watch and tap General.
Tap Dictation.
Toggle on Dictation and tap Enable Dictation to confirm. Now go back to the typing screen and tap the microphone icon to use dictation on your Apple Watch.
Make sure Apple Watch and iPhone language are the same
You can simply mirror your iPhone language to your Apple Watch or use different settings for your wrist. But choosing the latter may cause dictation problems on the Apple Watch. To fix this, follow these steps:
Open the Watch app on your paired iPhone and tap General.
Tap Language & Region.
Tap Mirror my iPhone.
After a minute, restart your iPhone and Apple Watch. Now, dictation should work flawlessly on your Apple Watch and let you type with your voice.
Unpair and repair your Apple Watch
Finally, if you’re still unable to use dictation on your Apple Watch, unpair it from your iPhone and pair it again.
Fix dictation not working on Mac
Here’s how to ensure dictation starts working on your Mac and lets you type without the physical keyboard.
Turn off Voice Control
Do you see “Keyboard Dictation is disabled when Voice Control is on” in the dictation preferences screen on Mac?
Follow these steps to turn off Voice Control which should stop the conflicting issues with dictation:
Select Voice Control from the left.
Uncheck Enable Voice Control.
Now, you should not see any error message in the dication settings on Mac.
Enable dictation on Mac
To enable dictation, do any of the following:
Restart your Mac
Connect your Mac to the internet
Additionally, your Mac must be connected to the internet to use dictation if:
Offline dictation file isn’t downloaded, or
The language you’re using dictation in isn’t supported for offline dictation.
Note: On a Mac with Apple silicon (M1, M1 Pro, M1 Max, M1 Ultra, and their successors), some basic dictation requests like composing messages or notes are processed on the device without needing internet. Using dictation in the search box requires an active internet connection.
Use dictation in a quieter room
If you’re having patchy experience with dictation on Mac, use it in a room with less noise. This is especially help if you have an old Mac.
Tip: Dictation can listen to you continuously for about 30 to 40 seconds. After that, you must pause and let it process and type what you said before speaking again.
Turn dictation off and back on
Select the right microphone for dictation
While you’re on the dictation preferences screen, make sure the correct microphone is selected. Select Automatic if you often use AirPods or other audio devices with your Mac.
Quit the Mac app and retry using dictation
Disable and enable Siri on Mac
Delete Speech Recognition file
Finally, if nothing helps, follow these steps:
From Finder, press Command + Shift + G.
Delete this file from here.
Restart your Mac.
Now, try using dictation and it should work perfectly. If the problem continues, go to ~/Library/Caches/com.apple.SpeechRecognitionCore and delete the file (if you see it).
Read next:
Apple Expands ‘Everyone Can Code’ Curriculum, Celebrates ‘Computer Science Education Week’
Apple is expanding its Everyone Can Code initiative to make it easier for elementary and middle school students to get started in the world of coding. Apple is introducing new curriculum for the program and expanding the availability of Today at Apple coding sessions.
Apple says the new curriculum includes new materials for students, teachers, and more:
A companion teacher guide supports educators in bringing coding into their classrooms with helpful ways to facilitate, deepen and assess student learning. Designed to support all students, the new Everyone Can Code curriculum is optimized for VoiceOver and includes closed-captioned videos and audio descriptions as well as videos in American Sign Language.
Everyone Can Code Puzzles is an all-new student guide to Swift Playgrounds where each chapter helps students build on what they already know, experiment with new coding concepts and creatively communicate how coding impacts their lives.
Furthermore, from December 1 through December 15, Apple Stores around the world will increase Today at Apple coding sessions to celebrate Computer Science Education Week. There will be new interactive sessions for people of all skill levels, while select stores will offer specific sessions for different age groups.
Read Apple’s full announcement below:
Apple expands Everyone Can Code to bring more coding resources to teachers and students
Apple today unveiled completely redesigned Everyone Can Code curriculum to help introduce more elementary and middle school students to the world of coding. Now available, the new curriculum includes even more resources for teachers, a brand new guide for students and updated Swift Coding Club materials. Today millions of students in more than 5,000 schools worldwide already use Everyone Can Code curriculum to bring their ideas to life and develop important skills including creativity, collaboration and problem solving. Additionally, starting today, learners around the world can register for thousands of free Today at Apple coding sessions taking place in December at all Apple Stores to learn to write their first lines of code to celebrate Computer Science Education Week.
The new Everyone Can Code curriculum builds on existing interactive puzzles, guides and activities to make learning to code even more approachable and connected to students’ everyday lives. Everyone Can Code Puzzles is an all-new student guide to Swift Playgrounds where each chapter helps students build on what they already know, experiment with new coding concepts and creatively communicate how coding impacts their lives. A companion teacher guide supports educators in bringing coding into their classrooms with helpful ways to facilitate, deepen and assess student learning. Designed to support all students, the new Everyone Can Code curriculum is optimized for VoiceOver and includes closed-captioned videos and audio descriptions as well as videos in American Sign Language.
The new Everyone Can Code curriculum integrates Apple’s Everyone Can Create project guides to help students express what they learn through drawing, music, video and photos. Designed to help unleash kids’ creativity throughout their school day, Everyone Can Create gives teachers fun and meaningful tools to easily fold creativity skills into their existing lesson plans in any subject from coding to chemistry.
Celebrating Computer Science Education Week
From December 1-15, Apple Stores worldwide will increase Today at Apple coding sessions to offer thousands of opportunities to celebrate Computer Science Education Week. The free interactive sessions provide opportunities for participants at a variety of skill levels to get started with coding. Sessions help aspiring coders explore block-based coding with robots, while those with more experience can get started using Swift Playgrounds to learn coding concepts or code an augmented reality experience.
Select stores will also offer special sessions for coders of all ages. Preschool-age kids can try creative pre-coding activities in the new Coding Lab with the Helpsters, a team of vibrant monsters who love to solve problems and are featured in the new live-action preschool series, available now on Apple TV+, from the makers of “Sesame Street.” Participants of all ages can also learn from Apple Distinguished Educators, Apple Entrepreneur Camp innovators, developers and artists. Customers can register for Code with Apple sessions starting today.
For the seventh year, Apple will also support Hour of Code with a new Hour of Code Facilitator Guide to help educators and parents host sessions using Swift Playgrounds and some of the more than 200,000 educational apps available from the App Store.
Preparing Students for College and Career
How To Customize Workouts On Apple Watch
Times when you are sweating it out, Apple Watch Workout app shows related metrics like your heart rate, the distance, the calories you have burnt, and more. Depending on your specific goal, you can display them on the screen or remove the ones that are less important. The watchOS offers you the needed flexibility to take complete control over the metrics. Let’s personalize them!
How to Customize Workouts Metrics for Apple WatchHow to Show a Metric in Workouts for Apple Watch
As of now, watchOS lets you show up to five metrics at a time. You can show or hide them depending on your needs. To get it done, you will have to take the help of your paired iPhone.
Step #1. Launch the Apple Watch app on your iPhone.
Step #2. Tap on My Watch tab → Scroll down and tap on Workout → Workout View.
Now, you need to tap on the workout you wish to customize.
Step #3. Tap on Edit at top right corner of the screen.
Step #4. Next, tap the Add button next to the metric which you wish to include → Finally, tap on Done.
From now onwards, the metrics will show up on the screen when you choose that specific type of workout.
How to Hide/Remove a Metric in Workouts for Apple Watch
No longer want any metric to display on the screen during a workout? You can easily hide it.
Step #1. Open Apple Watch app on your iPhone → My Watch tab → Workout → Workout View.
Step #2. Tap on the workout you wish to customize → Tap on Edit at top right corner of the screen.
Step #3. Next, tap on the Remove button next to the metric you wish to hide. Tap on Remove.
Step #4. Tap on Done.
You can switch between multiple and single metric. While the former lets you display up to five elements at a time, the latter allows you to show only one item at a time.
If you want to keep things simple, you can choose to show only one element at a time. But if you wish to display more than one crucial thing, multiple metrics would be the way to go.
How to Switch Between Multiple and Single Metric in Workouts for Apple Watch
Step #1. Open Apple Watch app on your iPhone.
Step #2. Tap on My Watch tab → Workout → Workout View.
Step #3. Now, you have two options:
Multiple Metric
Single Metric
Select any of the preferred options as per your need.
Then, quit the settings.
watchOS also lets you perfectly reorder the elements you want to show on display. For instance, you can make the heart rate appear at the top followed by active calories. Read on…
How to Reorder Metrics in Workouts for Apple Watch
Step #1. Open Apple Watch app on your iPhone → My Watch tab → Workout → Workout View.
Step #2. Tap on the workout → Tap on Edit located at the top right corner of the screen.
Step #3. Now, you need to tap and hold the reorder button next to the metric you wish to move.
Then, you have to drag the metric at your preferred location → Tap on Done.
Did you know that you could also view metrics just for your running? If you want to speed up your game or wish to improve it, you should definitely give it a shot!
How to View Metrics Just for Running in Workouts for Apple Watch
The Workout app comes with “Pace Alert” allows you to select the desired pace for your run. And whenever you go ahead or fall behind the set target, the Apple Watch will alert you.
Step #1. Open Workout app on your Apple Watch.
Step #2. Now, scroll down tap on the three dots next to Outdoor Run.
Step #3. Next, tap Average Pace Alert and then set your pace.
You can choose between Average or Rolling.
While the former signifies the average pace for the kilometers, the latter implies your one-kilometer pace.
Select any of the two options based on your goal. And then kick-start your run in top gear!
How to Specify Your Activity Type in Workout App on Apple Watch
The Workout app on your Apple Watch has some pre-set activities, which include Walking, Running, Cycling, Elliptical, Rower, Stair Stepper, HIIT (High-Intensity Interval Training), Hiking, Yoga, Swimming, and Wheelchair. It is but natural that Apple cannot add every activity to the Workout app.
However, the smartwatch allows you to specify your activity type in the Workout app.
Step #1. Open the Workout app on Apple Watch.
Step #2. Scroll the list of activities and tap on ‘Other.’
Now start your activity; make sure you perform your special activity for a long time – at least for 15 minutes.
Step #3. When you finish your activity, close the workout; swipe the watch screen right and tap on End button.
Step #4. Now, tap on Name Workout on the summary screen.
Step #5. Tap on the fitting activity name from the list of activities presented in alphabetical order.
Step #6. Once you feed the activity, scroll down and tap on the Done button.
Now your new activity will be included in the list of Workout options on your Apple Watch. Moreover, this newly created category will also be available in the Activity app on your iPhone.
So what is your specialized activity you wish to include in the Workout interface?
That’s pretty much it!
Wrapping up
Apple Watch continues to be favorites for fitness and health-conscious people. The latest iteration of Apple Watch Series 4 has come up with some great features like Fall Detection, ECG Report, and more.
They have added more riches to the already impressive profile of the watch.
You might want to catch up with these posts as well:
Author Profile
Dhvanesh
The founder of iGeeksBlog, Dhvanesh, is an Apple aficionado, who cannot stand even a slight innuendo about Apple products. He dons the cap of editor-in-chief to make sure that articles match the quality standard before they are published.
Update the detailed information about Not Everyone Understands Apple Watch, And That’s Just Fine on the Bellydancehcm.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!