You are reading the article Make Your Chromebook Touchpad Work Properly Again With These Hacks updated in March 2024 on the website Bellydancehcm.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested April 2024 Make Your Chromebook Touchpad Work Properly Again With These Hacks
Make Your Chromebook Touchpad Work Properly Again With These Hacks Troubleshooting Chromebook mouse not working issues.
This quick troubleshooting guide will help you fix a Chromebook mouse that’s not working.Points To Consider While Resolving Chromebook Touchpad Not Working Error
Go through this quick workaround for a touchpad that is not working. Check if you are able to navigate through either an external mouse or your Chromebook’s touchscreen. If both are working, then the issue is just with your touchpad and can be fixed through a simple steps. If nothing works, try hard resetting a Chromebook. You might face a similar issue with the touchpad/mouse of your laptop.Chromebook Touchpad Or Mouse Not Working: Fixes
● Make sure there is no dust or dirt on the touchpad.
● Press the Esc key several times.
● Turn your Chromebook off, then back on again.
● Perform a hard reset.
● If you have more than one account on your Chromebook, delete the account that has problems with the touchpad, then re-add the account.Method 1. Ensure That There’s No Dust And Dirt
Make sure that you won’t let any dirt or dust rest on any part of your Chromebook. A good cleaning is always an integral part of keeping a device up to the mark. If you find any dust particles on your Chromebook’s keypad or touchpad, try cleaning it immediately using a soft cloth or an air compressor to pull out anything that is knowingly or unknowingly stored within your key spaces.Method 2: Press Esc Key Multiple Times
This method of pressing Esc key several times might sound vague, but believe me it works. Sometimes it is something on a particular page that restricts your touchpad from working. If this is the issue, Esc key comes for the rescue. Esc key stops a page from loading and can get things better after a few attempts.Method 3: Drumroll Your Fingers On The Chromebook’s Touchpad
There are instances when the Chromebook mouse loses its vibrations due to dust or something and to regain it back, you can try drumming your fingers on the Chromebook touchpad for around ten seconds. Yes, when you Drumroll your fingers for ten seconds, it might bring back the long lost vibration and your touchpad might start working again.Method 4: Restart Your Chromebook
In every tech article you will surely find this way. There is a reason behind restarting your system to fix any general issues and believe me or not it works often. This is because while you are working on a device, you often open and close apps leaving some of them running in the background. This might create a hassle and this is why we recommend you to power off and on your Chromebook to fix touchpad problems. If you are that lucky, this trick might work.Method 5: Hard Reset Your Chromebook
Hard resetting a device like Chromebook can help resolve several issues like speeding up Google Chromebook, fixing the malfunctioning touchpad. For your information, hard reset does not affect your system files, so you can feel free to hard reset your Chromebook, anytime you face a problem with its touchpad or keypad. Here’s how to perform hard reset on a Chromebook:
Long press the Power button until Chromebook turns off.
Now press Power and Refresh buttons at the same time to reboot and reset the Chromebook.Method 6: Delete Account That Is Facing Problem With Chromebook’s Touchpad
Last but not the least. Try deleting the problem account and re-add it to your Chromebook. This method applies to those who own more than one account on Chromebook. Also you can try switching to a different account and check if the issue persists.
These were some of the technical hacks you need to consider to get your Chromebook’s touchpad back in motion. We hope you find these tricks helpful and it helped your resolve Chromebook touchpad not working issues.
In addition to these best hacks to fix Chromebook mouse not working, we have some bonus tips for you as a suggestion. You can consider them too while trying other hacks to fix the mouse not working on Chromebook.
Some Chromebooks have a function key that can turn off touchpad functionalities. To ensure which key does that, check your Chromebook’s user manual. If this is the case, turn it on and enjoy using Chromebook mouse back again.
Make changes to Touchpad settings and the way it works. For this go to Settings and then Touchpad on your Chromebook. You can try turning on or off some of its features, you never know which one might be of your great help. This is just a hit and trial recommendation. However tweaking settings might help.Concluding – Chromebook Touchpad Not Working
These were some of the technical and non-technical list of tips and tricks to resolve ‘Chromebook mouse not working’ issues. If none of these tips and tricks helped, there is a problem with your Chromebook’s hardware. To get it fixed, you need to consult a technician for its professional check and repair.
Keep reading Tweak Library for more troubleshooting tips and tricks.Quick Reaction:
About the author
You're reading Make Your Chromebook Touchpad Work Properly Again With These Hacks
Sometimes being a woodworker is a lot like being a genie. The other day, my wife was using a curved wooden stirring spatula to make cheese sauce for mac ’n’ cheese. “I wish I had one of these, but way longer,” she said to me. So I went downstairs, found a scrap of maple about the size she wanted, and made her a bigger one. Though I’d never made a kitchen utensil before, it took about two hours, and was far easier than I had anticipated.
No matter your skill level, making a wooden spatula, spoon, or some other kind of utensil offers lots of options for creativity with a wide range of shapes and styles. You can copy something you already have like I did, find a template online to use as a base, or create a style that is completely new. Whether you’re looking for a relatively quick present or trying to enhance your kitchen arsenal, whatever you craft is sure to be a crowd pleaser.
Warning: DIY projects can be dangerous, even for the most experienced makers. Before proceeding with this or any other project on our site, ensure you have all necessary safety gear and know how to use it properly. At minimum, that may include safety glasses, a facemask, and/or ear protection. If you’re using power tools, you must know how to use them safely and correctly. If you do not, or are otherwise uncomfortable with anything described here, don’t attempt this project.Stats
Time: 1 to 2 hours
Material cost: $5 to $10
Difficulty: EasyMaterials How to make a wooden spoon, or any other utensil
1. Draw your design on the wood. Because I made a larger version of an existing utensil, I freehanded the design with the original as a reference. If you purchased a template, cut it out and trace it onto your board.
Remember that a template has two profiles. There’s the main shape that you’d see when you put the utensil down flat, but there’s also the narrow edge profile. You’ll need to draw both of these.
Pro tip: I always prefer drawing on the wood rather than taping a template to the board. This helps me avoid losing my design partway through if the paper falls off or gets shredded while I’m cutting.
2. Cut out the rough shape on the band saw. Start cutting the largest profile, as though the utensil is lying flat. Try to get the general shape in one or two large cuts, rather than many small ones—this will make the second profile easier to trim.
[Related: The surprising woodworking tools you already have around the house]
3. Tape the cutoff pieces back onto the rough-cut block. This may seem counterproductive, but putting these edge pieces back in place stabilizes the board so you can cut out the second profile more safely and accurately. You may need to redraw sections of the edge profile over the tape, but you’ll thank yourself later.
4. Refine the shape. Once you have the general shape, use your band saw to trim the more intricate and detailed areas. You can also use chisels or hand saws for this, depending on your comfort, the cuts required, and your access to tools. Notch out the tighter angles and corners, start to shape the handle, and form whatever curves you can. If you have a spoon gouge (I do not), scoop out the spoon head as needed.
Any material you remove now is material you won’t have to sand off later. If you’re using only an orbital sander, like I did, get as close as you can, because the orbital sander is slow. A belt sander removes more material faster, so if you have access to one of those, you can be a bit less precise with this step.
Warning: Be careful while making these more intricate cuts, both for your physical safety and to avoid removing too much material. Better to spend 10 extra minutes sanding than to accidentally cut your handle (or fingertip) off.
5. Sand until you can’t feel your hands, then sand some more. Sanding will be by far the longest and hardest part of this project. Rather than simply smoothing the wood like when you’re building a cutting board or piece of furniture, you’ll be using sanding to actually finish shaping the utensil. I sanded my entire spoon using just an orbital sander and my quickly-cramping hands, so it’s absolutely doable if that’s all you have. However, manual sanding will take a long time, and—as I said above—a belt sander will definitely speed up the process.
Start with 60-grit paper to maximize material removal. Don’t be afraid to change sanding discs regularly when they start to dull. With this grit, your goal will be to remove all of the saw and chisel marks and refine the shape to near-finished dimensions.
Most of my time was spent working on the handle, trying to find a comfortable shape and size. I actually went back to the bandsaw to remove more material several times during the sanding process, just to speed it along.
Once you’re satisfied with the shape, move through the remaining grits, up to 220. I used 80-, 120-, 150-, and then 220-grit paper.
6. “Water pop” the wood. The first time your spoon gets wet, the wood fibers will absorb the water and expand. No matter how well you’ve sanded, this will cause the wood to feel rough and unsanded. The way to avoid this is called “water popping.” All you have to do is get the wood wet, then let it dry. Lightly hand-sand the resulting roughness off of the spoon with 220-grit paper, or whatever grit you finished with. This will knock down those bloated fibers, and bring back the nice smooth texture. You may have to water pop your project two or three times to achieve a perfect result.
Warning: Don’t use a powered sander for this. If you do, you might take off too much material, and you’ll have the same roughness the next time your spoon gets wet.
7. Apply finish. Because this is a cooking spoon, you’ll need to use a food-safe finish. I use cutting board conditioner, which is a mixture of mineral oil and beeswax. Squeeze some on and gently wipe it all over the spoon with a clean rag. Let the oil soak in for 15 to 20 minutes, then wipe off the excess. If you find that the wood absorbed all of the oil and feels dry, apply another coat.
And with that, you’re done. Wooden spoons are a fun, relatively straightforward project that really impress. They’re excellent holiday gifts, and a good way to use up some of that scrap wood I know you have stacking up in various corners of your shop. So grant some wishes and help your friends and loved ones cook in style.
In Windows, you can install the driver for your printer and print document on your PC. What about Chromebook? With a lack of dedicated software for printing, it may seem confusing at first glance. Fortunately, it’s not confusing at all, and in just a few easy steps, Chromebook users will be on their way to printing documents, photos and more. Keep reading for all of the steps you need to know to print from your Chromebook.Adding a Local Printer
Contrary to popular opinion, Chrome OS does have native printing built in, so adding a printer doesn’t require hacker-level computer knowledge. To add a local printer, follow the steps below.Using Google Cloud Print
It is easy to set up a printer on ChromeOS. The act of printing is even easier. The first and most critical step is to find a page you want to print.
At this point, using Cloud Print, your printing should start just as it would from any computer.Using Android Apps
A lesser-used but still viable option for adding printers to a Chromebook is Android apps. With most recent Chromebooks enabling Android app functionality, downloading printer apps from the Play Store is a smart workaround. Apps like Canon, HP, Epson, Samsung, Brother and more are all available in the Play Store. After downloading the app, most will allow you to set up and sync the printer directly from the app itself. While not the most common way, these apps are one of the quickest ways to print directly from a Chromebook.Wrapping Up
As you can see, it is easy to print from Chromebook. There is no need to install abdriver like in Windows. There are also plenty of things you can do on a Chromebook, like playing games, installing Firefox, or managing zip files.
David is a freelance tech writer with over 15 years of experience in the tech industry. He loves all things Nintendo.
Subscribe to our newsletter!
Our latest tutorials delivered straight to your inbox
Sign up for all newsletters.
Now that Google Reader is gone, most of you have moved to Feedly and used it as the alternative to Google Reader. If you are a Google Chrome user, here are some extensions that you can use to improve your Feedly experience.
Feedly comes with its own interface and design. However, if you are too used to the Google Reader experience, this GGReader extension can turn your Feedly page into a Google Reader look-alike.
Once installed, you just have to reload your Feedly page for the changes to take effect.
This is how Feedly originally looked like:
And this is how Feedly looks after the installation of GGReader:
Did you notice that even the Feedly logo has been styled to look like Google?
The bad thing about this extension is that it doesn’t allow you to change the color scheme, nor does it show a distinction between read and unread articles. It will be great if all these issue are fixed.2. Feedly Background Tab
When you are reading an article in Feedly, you can press the shortcut key “v” to load the article in a new tab and switch to this new tab immediately. What if you want to open it in a background tab and read it later? The Feedly Background Tab extension allows you to do just that.
Once installed, you can assign a shortcut key (the default is “;”) to the extension. While reading a feed in Feedly, you just have to press the shortcut key (;) and the article will load in a background tab. You can then continue to read other feed in Feedly.3. Feedly Pooqer
If you are always crazy about the number of new items in your RSS reader, then this extension will be handy to you. Feedly Pooqer add an icon to your Chrome’s system tray and shows the number of unread count in your Feedly account.
You can set the interval that Feedly Pooqer polls Feedly for the unread count, but you need to be constantly logged on to Feedly (or Google).4. Add to Feedly
Google Chrome doesn’t come with any RSS subscription feature by default. This extension not only adds a RSS subscription feature to Google Chrome, it also allows you to add the RSS feeds directly to Feedly.5. Feedly Readable
For those who prefer to read their feeds in a distraction free environment, the Feedly Readable extension can transform the current Feedly design into a minimal distraction free interface so you can focus purely on the readability of your articles.
When this extension is active, the Feedly’s navigation pane will be missing from the interface. You just have to hover your mouse over the empty area and the navigation pane will appear.Conclusion
Damien Oh started writing tech articles since 2007 and has over 10 years of experience in the tech industry. He is proficient in Windows, Linux, Mac, Android and iOS, and worked as a part time WordPress Developer. He is currently the owner and Editor-in-Chief of Make Tech Easier.
Subscribe to our newsletter!
Our latest tutorials delivered straight to your inbox
Sign up for all newsletters.
Falling in Love with Science, Again BU’s RET program trains middle and high school teachers
High school teachers Fjodor Dukaj (left) and Jay Defuria superimposed on an image of the Earth taken by cameras carried by the helium balloon they launched. Photo courtesy of Jay DeFuria
Last week, high school science teachers Fjodor Dukaj and Jay DeFuria found themselves zipping along a 30-mile stretch of state highway in hot pursuit of a giant helium balloon they had just launched. Attached to its kite-like tail bobbed four boxes containing a GPS device and other equipment they and BU scientists they were working with hoped would capture images of the Earth’s curvature and measure air temperature as the balloon rose more than 18 miles into near space.
The teachers, from Somerville and Northfield Mass., felt an adrenaline rush as they approached the landing site in West Dover, Vt. “It was like chasing a tornado, just a little safer,” Dukaj recalls. Their group parked at the edge of the Green Mountain National Forest and trekked through dense foliage with a handheld antenna, called a Yagi, that blipped a tune when they headed in the right direction. The Yagi eventually sang at the base of a birch tree, where their treasure hung suspended in the branches high above. (More about that in a minute.)
Dukaj and DeFuria are among 10 middle and high school science teachers who have spent the past six weeks studying biophotonics through BU RET (Research Experiences for Teachers), a three-year, $474,000 grant-funded program sponsored by the National Science Foundation. The BU program is one of 43 RET sites across the country, many of which focus on engineering. BU’s Photonics Center provides faculty mentors, facilities, and substantial indirect funding for BU RET. The program’s principal investigators are Cynthia Brossman, director of BU’s Learning Resource Network (LERNet), which also supports the program, Michael Ruane, a College of Engineering professor emeritus of electrical and computer engineering, and Helen Fawcett (GRS’97), operations and technical programs manager at the Photonics Center.
Under the BU program, veteran teachers are paired with preservice or novice teachers and assigned to photonics labs working on a variety of projects, from using imaging sensors to detect antibodies, as in the labs of M. Selim Ünlü, an ENG professor of electrical and computer engineering, to using optics as a diagnostic test for diseases like malaria, as in the labs of Jerome Mertz, an ENG associate professor of biomedical engineering.
Beyond lab experience, teachers have weekly brown bag lunches with BU researchers, who discuss their latest work, and pedagogy sessions to explore how to integrate their new technology and research experience into the classroom. Each teacher receives a stipend of up to $7,000 and funds to buy materials for their classrooms. They return to BU three times throughout the school year to swap success stories.
Brossman says the program connects the University with the larger community and is mutually beneficial. Local teachers “are the conduit,” she says. “They’re the people through which we can share what is going on at our University with young students and hopefully inspire them to become interested in these fields.”
Sharon, Mass., middle school teacher Valerie Ordway, another RET participant, says her school days are typically spent dealing with administrative duties and catering to her students’ diverse needs, not plunging into the latest scientific discoveries. Her experience at BU, she says, is “an injection of intellectual stimulation” and an opportunity to experience what life as a scientist truly entails.
James Louis, a teacher at public high school TechBoston Academy, already knows how to incorporate his work in Mertz’s lab with his AP biotechnology lessons on sickle cell anemia, a disease not uncommon in a school where 70 percent of students are African American. When his students ask, “When will I actually apply this?” he can give them a precise response: in finding a cure.
Dukaj and DeFuria have been working with faculty and staff affiliated with Boston University’s BUSAT (Student Satellite for Applications and Training) program to produce data that will help BU researchers in designing a low Earth-orbiting satellite. Neither they nor their RET collaborator Nathan Darling (ENG’12), BUSAT project manager, had anticipated last week’s treetop rescue of their helium balloon. Darling came up with a somewhat unscientific solution: “We’re just gonna try to yank it.”
Back at the base of the birch tree the next morning, DeFuria attached fishing line to the end of an arrow, fit it into his bow, and shot it in an arc over the dangling boxes. The fifth arrow coursed the right path, and with a powerful tug to the line, the boxes fell in tandem to the ground.
“It took some time and patience,” DeFuria says, “but with a bit of maneuvering, we were able to recover everything intact.”
Darling is pleased with the experiment. The process honed his skills as an engineer interested in supporting the sciences.
And Dukaj and DeFuria couldn’t be happier: they now have a series of six affordable lab projects, all based on Massachusetts and national curriculum standards, that they can use in their classrooms. “I think this is a very feasible lab to do with the students,” Dukaj says.
Judging by the two teachers’ broad grins, it may be hard to tell who’ll be more excited about the next balloon launch—them, or their students.
RET participants will present lectures about their research today, Wednesday, August 8, from 10 a.m. to 12:30 p.m. at the Photonics Center, 8 St. Mary’s St., Room 339. Tomorrow they will host a poster session from 3 to 5 p.m. in the center’s seventh floor atrium. The presentations are free and open to the public.
Explore Related Topics:
1. Upload any photo
When Snapchat first appeared in 2011, it only let you share images that you captured through the app. Today, it’s added the option to send any picture stored on your phone. This lets you dig up and share older memories.
To post a saved photo or video, open the camera screen and tap the small circle under the main shutter button. This will open the app’s Memories section. Swipe to reach the Camera Roll tab, then select a photo or video and tap Edit & Send. You can add the usual Snapchat edits before sending the finished product straight to your friends or posting it to your Story.
And that’s not all that the Memories feature can do. It also lets you save all of the Snaps you’ve sent (but not those you’ve received) for future browsing and reposting. From the camera screen, tap the ghost icon on the top left and then hit the cog icon on the top right. Choose Memories to configure how it will save your Snaps to your phone in the future.2. Combine Bitmoji with augmented reality
One of the best Snapchat add-ons, also available as a separate app, is Bitmoji (free for Android and iOS). It gives you a customizable cartoon avatar within the world of Snapchat and unlocks a whole new set of stickers to put on top of your Snaps. For example, you can share your little Bitmoji stand-in waking up, heading to bed, giving your friend a birthday cake, and so on.
To create and customize a Bitmoji, open the camera screen and tap the ghost icon on the top left, then choose the Create Bitmoji option. If you haven’t already installed the app, Snapchat will prompt you to download it. Once you do, you can set the appearance of your Bitmoji character, from hair color and style to the type of footwear (you can also change this later).3. Map your friends
The recently introduced Snap Map lets you see where your friends are on—as the name would suggest—a map. It even indicates whether they’re on the move, based on the GPS signal reported by their phone. When you access this feature, you’ll see your friends represented by a blob or their Bitmoji. A car appears around this symbol if Snapchat detects that they’re moving fast, and an airplane does the same if they’re currently at an airport.
To find the Map, open the camera window screen and pinch in with two fingers on the spot where you normally take your Snaps. Then app will take you through a quick setup process. If you’d prefer not to share your location, you can opt out: Tap the cog icon on the top right, and you can enable Ghost Mode, where you get to see your friends’ locations but they can’t see yours. From the same screen, you can share your location with just a few friends rather than all of them.
Snapchat will only make your location accessible to people with whom you’ve already connected. However, if you’re still uncomfortable with the Map feature, you can avoid using it entirely: Just don’t complete the setup process in the first place.4. Apply multiple filters
Snapchat isn’t the most intuitive app out there, so it may take some time to recognize and learn to use some of its features. The option to add multiple filters to a photo is a good example. Adding a single filter to a Snapchat photo is easy enough—you just capture an image and then swipe to the left or right on the screen. Here’s how you one-up yourself by adding another filter on top of it.
Once you’ve applied your first filter, tap and hold on the screen with one finger, then keep swiping with another. (Only certain kinds of filters can work together: You can apply one color cast and one text overlay, for example, but not two text overlays.) After that, you can drop on extra text, scribbles, and stickers as usual.
Speaking of filters, Snapchat now lets you make your own geofilters for $6 and up: You get to create a custom design to celebrate an event at a set location, such as a wedding or a party. From the camera screen, tap the ghost on the top left and then the cog on the top right. Next, pick On-Demand Geofilters to start designing. You can choose from a number of templates and review the final image before pushing it live.5. Chat like you would on a messenger app
Snapchat has grown way beyond its original boundaries to include much more than disappearing photos and videos. You can send instant messages, make audio and video calls, and even send pre-recorded clips to your contacts. In fact, Snapchat includes as many features as a lot of the other messaging apps on your phone.
The video and audio call buttons appear on the same screen as the text messaging options. Tap either icon to start a live call, or tap and hold either icon to record and send a message. Again, these pre-recorded messages will disappear as soon as they’re heard, unless you tap and hold on them.
Update the detailed information about Make Your Chromebook Touchpad Work Properly Again With These Hacks on the Bellydancehcm.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!