Trending February 2024 # Macbook Pro Is Slow After Update? Try These 5 Solutions • Mactips # Suggested March 2024 # Top 11 Popular

You are reading the article Macbook Pro Is Slow After Update? Try These 5 Solutions • Mactips updated in February 2024 on the website Bellydancehcm.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested March 2024 Macbook Pro Is Slow After Update? Try These 5 Solutions • Mactips

MacBook Pro is slow after update? Try these 5 solutions

665

Share

X

X

INSTALL BY CLICKING THE DOWNLOAD FILE

To fix Windows PC system issues, you will need a dedicated tool

Fortect is a tool that does not simply cleans up your PC, but has a repository with several millions of Windows System files stored in their initial version. When your PC encounters a problem, Fortect will fix it for you, by replacing bad files with fresh versions. To fix your current PC issue, here are the steps you need to take:

Download Fortect and install it on your PC.

Start the tool’s scanning process to look for corrupt files that are the source of your problem

Fortect has been downloaded by

0

readers this month.

Protect your Mac on all fronts with unrivalled antivirus technology! Intego is a veteran when it comes to Mac security, bringing you well-researched and tested security features to protect your Mac against malware and cyber threats. Here are the most important features:

Advanced antivirus and PUP protection

VPN with unlimited encrypted traffic

Automatic backup of essential files

Cleaner utility, to speed up your Mac

Parental controls feature

Secure your Mac with Intego!

Keeping your MacBook up to date is important, but many users reported that their MacBook Pro is slow after an update.

According to users, this problem has drastically impacted their productivity, but there’s a way to fix this issue.

After updating your system, check if the problem is still there.

2. Remove the problematic software

If your MacBook Pro is slow after an update, the issue might be third-party software, such as your antivirus for example.

Several users reported this issue while using a third-party antivirus, but after removing the antivirus software, such as Trend Micro, Malwarebytes, and AVG the issue was completely resolved.

Bear in mind that other antivirus software and applications can cause this issue to appear, such as the 32-bit version of Microsoft Office or Adobe software, so you might have to remove or reinstall them.

3. Sign out of iCloud

Note: Bear in mind that this is just a workaround, and it might not be suitable if you heavily rely on iCloud.

4. Prevent Adobe processes from running in the background

According to users, Adobe and Creative Cloud processes can cause this issue to appear. To fix this issue, you need to delete all Adobe launchers from the following folders:

HD/Library/LaunchDaemons

HD/Library/LaunchAgents

usr/Library/LaunchAgents

After doing that, restart your MacBook and the issue should be resolved.

5. Perform a thorough cleaning

All computers become gradually slower in time and that’s mostly because you install all sorts of software that use memory and after you reinstall them, they leave all sorts of files behind.

The main solution, in this case, is to perform a thorough cleaning of your computer, and the best way to do that is to use specialized software.

FAQ: Learn more about speeding up your MacBook

Why is my MacBook running so slow?

If your MacBook is running slowly, then it might be a problem caused by too little hard-drive space available. Here’s an interesting guide that will help you with this problem.

How do I speed up a slow Mac?

To speed up a slow Mac, you should close any background applications, clean your desktop, remove any clutter from your App list, and stop programs from automatically running at startup.

What happens if you put more RAM than supported Mac?

If you add more RAM than your Mac motherboard can use, your computer might not run at all, or even if it does, it will use the same amount of RAM as before.

Editor’s Note: This post was originally published in May 2023 and has been since revamped and updated for freshness, accuracy, and comprehensiveness.

Was this page helpful?

x

You're reading Macbook Pro Is Slow After Update? Try These 5 Solutions • Mactips

Ring App Not Working? Try These Solutions!

The concept of Ring was intriguing and it definitely got a lot of attention when it launched. But with its last few updates, the negatives have rolled in, and users are dogpiling on the company to improve its app before they pull out and switch over.

For a company that boasts of its live video streaming capabilities, their app should be impeccable, but that is just not what some of the users are getting.

What is Ring?

Developed by the retail giant, Amazon, Ring is an integrated system of security that revolves around an IP camera, motion detection software, and a smartphone. Ring requires users to install their hardware (Ring doorbell, Security cameras), and link it to their smartphones via the internet.

The Ring doorbell, in particular, put the company on the map. By integrating motion detection software into it, the doorbell alerts users on their smartphone/tablet when someone arrives at their door, even before they ring the bell. Users can answer the door right from their phones by speaking through the speaker embedded in the doorbell.

RELATED: How to fix low speaker volume issue on Ring doorbell

Common problems with Ring app

Ring hardware is complemented by its app that must be installed on a smartphone/tablet. This app acts as a control system for all its functions. However, with recent updates, the app seems to have gone from bad to worse.

The app doesn’t load/crashes

One of the most consistent problems with the app seems to be with its loading time. Several users have complained that the app crashes on startup. Another similar problem is the sign-in loop. When the user inputs their username and password, the app crashes and restarts.

Possible solutions:

Try uninstalling and reinstalling the application. Some users found this to help fix the problem.

Cannot Sign in

Users are finding it difficult to sign in to the app to access their accounts. This is accompanied by the error message ‘An error occurred trying to perform this operation. Try again’. One possible reason for this seems to be VPNs that are routing the requests into black holes.

Possible solutions:

If ad blocker is being used, create an exception for the app.

If VPN is being used,  create an exclusion or temporarily disable it before signing in. Note: This only needs to be done when you need to sign in to the app with your username and password; not every time you launch the app.

Login certificate failure

This certificate error causes the login screen of the app to flash constantly, without allowing the user to input their credentials. The issue seems to be caused by an expired SSL certificate. Ring has addressed the problem and most users have concluded that the problem has been fixed.

Possible solutions: 

Since the issue has been fixed by the company, the problem could be in the native app on your phone. Try uninstalling and reinstalling the app.

Check that the app is up to date, and does not have any updates pending.

Restart the phone.

Alert tones missing

Users believing they are missing notifications from the app, may not be completely right. It turns out, the app may not have all the required alert tones in place for its notifications. This means that even if a notification comes through, the alert tone does not sound.

Possible solutions:

Search for the ‘My files’ folder on your phone. (You may use a File Explorer app or the inbuilt app to locate files on the internal memory of the device)

Delayed/no notifications

This remains one of the most persistent problems even after fresh updates to the app. Users receive notifications minutes and sometimes even hours after the incident has happened. This defeats the purpose of the product and users are understandably annoyed.

Possible solutions:

Disable ‘power saving’ mode on your device. This sometimes kills background apps and prevents them from sending notifications.

Note: OnePlus is aware of this recurring problem for its users and is working on a fix.

Live View Not Working

One of the big selling points for the Ring Doorbell is the ability to view in real-time what is happening around your house. Some users, however, have reported encountering an issue with the same.

Possible solutions:

If your router is broadcasting on both 2.5 GHz as well as 5 GHz, make sure that the Wifi Network Name is different for both.

Change your router encryption to WPA (not WPA 2). Ring Doorbell does not support WPA2 or higher encryption.

Live View requires significantly higher Wi-Fi speeds, so check whether someone is hogging up the bandwidth.

Motion zone not working

Ring allows users to set the zones in which the camera will detect motion. Setting motion zones prevents the camera from being triggered by passing traffic. However, these zones do not seem to be very restrictive, as users are complaining that their devices are being triggered by events that occur far out of the zone.

Possible solutions:

Check the level of the ‘Smart alert’ setting on the app. If there is too much motion being detected, try reducing it to ‘Light’.

Event History won’t play

The Event History panel in the Ring app allows users to view past recordings. Some users are encountering playback issues with old saved videos. This issue has been addressed by Ring.

Possible solutions:

Uninstall the application, restart the phone, and reinstall the Ring app from the Play Store.

Make sure the Ring app and the mobile device is updated to the latest version.

No Sound After Sleep Mode: Enable It With These 3 Solutions

No Sound After Sleep Mode: Enable It With These 3 Solutions Note that a driver update often works

536

Share

X

Many users have reported that their PC loses the ability to playback sounds after exiting Sleep Mode.

This issue may happen because of an outdated or corrupted driver, so be sure to begin by updating your audio driver. 

X

INSTALL BY CLICKING THE DOWNLOAD FILE

To fix Windows PC system issues, you will need a dedicated tool

Fortect is a tool that does not simply cleans up your PC, but has a repository with several millions of Windows System files stored in their initial version. When your PC encounters a problem, Fortect will fix it for you, by replacing bad files with fresh versions. To fix your current PC issue, here are the steps you need to take:

Download Fortect and install it on your PC.

Start the tool’s scanning process to look for corrupt files that are the source of your problem

Fortect has been downloaded by

0

readers this month.

You have found this guide because you are experiencing no sound after sleep mode on your Windows 10 PC. Let us show you how to resolve it.

Sound issues aren’t exactly an alien concept on the Windows platform, which also applies to the Windows 10 operating system. And a common problem experienced on Windows 10 PCs is the device going dumb each time it wakes up from sleep.

Curiously, the sound issue is non-existent when the device returns from hibernation or after a restart. Somehow it is only when the device is out of the sleep cycle that it tends to lose its audio abilities.

All of this makes it not too big of an issue, but one that can drive you nuts nonetheless; more so if you are a music buff and can’t resume your listening post-sleep mode.

Why is there no sound after Sleep Mode?

From what we gather from users who have passed through this problem, a few things may trigger this issue. At the top of these are the following:

Outdated drivers – In most cases, this may be the case if the audio driver is outdated.

Hardware problems – In some instances, this may be a sign of issues with your computer speakers.

Problems with settings – Windows sound enhancement settings, for example, may trigger this problem. You should ensure that you have the best settings for all audio devices.

Here are some practical solutions, and they will also come in handy if the sound stops working after sleep mode, your HDMI audio stops working after sleep, or with brands like Dell, LG, HP, etc.

How can I fix no sound on Windows 10 after sleep mode?

Before you try any of these solutions:

Try restarting the device. A restart will force problematic processes to stop and could fix the problem.

You may also sign out of the account and sign back in. But if any of these do not work, go through these fixes.

1. Update the audio adapter

If you’re looking for a way to simplify the process, a third-party driver updater like Outbyte Driver Updater should do the trick.

All you need to do is run it, and it will instantly start scanning your PC for outdated, broken, or even missing drivers.

Once you’ve selected which drivers you want to fix, it will download and automatically install them for you.

Once that is done, you must finish it with a system restart to apply the changes.

See if this works. An outdated or corrupted driver is the most likely cause for your audio to malfunction, so explore all options to ensure your system is running the latest drivers.

Fix your drivers easily and locate the latest updates with the Outbyte Driver Updater software.

Free Trial Download now

2. Run the Sound troubleshooter 3. Change system memory value

This is especially applicable to those notebook devices that have an installed memory of 4 GB.

However, if the issue isn’t resolved, you might also want to check if a Windows 10 update is available. Do a virus scan as well as with the latest version of your antivirus software.

Get in touch with the audio component manufacturer and see if they can provide an update to solve the issue.

Was this page helpful?

x

Error 0X800701E3: Fix It Permanently With These 5 Solutions

Error 0x800701E3: Fix It Permanently With These 5 Solutions Get your external storage device working in no time

3

Share

X

Some users reported Error 0x800701E3 in Windows, an issue that occurs during file transfers and interrupts the process.

The error arises due to improper connections or a failing storage device.

Chkdsk scans for both external drives and PC hard drives could be very useful or you could use a dedicated software to get things running.

X

INSTALL BY CLICKING THE DOWNLOAD FILE

To fix Windows PC system issues, you will need a dedicated tool

Fortect is a tool that does not simply cleans up your PC, but has a repository with several millions of Windows System files stored in their initial version. When your PC encounters a problem, Fortect will fix it for you, by replacing bad files with fresh versions. To fix your current PC issue, here are the steps you need to take:

Download Fortect and install it on your PC.

Start the tool’s scanning process to look for corrupt files that are the source of your problem

Fortect has been downloaded by

0

readers this month.

Error while transferring data is common, and users come across them occasionally. One such is Error 0x800701E3: The request failed due to a fatal device hardware error.

This happens when copying or moving files to an external SSD, but some users also get Micro SD card Error 0x800701E3. So, let’s find out all about it and the solutions that worked for others.

What is error 0x800701e3?

The error is encountered when copying or moving files. Some even came across Error 0x800701E3 while installing Windows due to the setup’s inability to install the relevant files to the drive. Here are a few reasons users encounter the error:

Improper connections: One of the most likely causes behind the problem, improper connections, trigger the error and lead to cases where the external drive doesn’t show at all.

Failing storage drive: Physical damage or other major issues can also cause the error code external hard drive 0x800701E3.

Bad sectors: When you have bad sectors on the drive, data can’t be written to it, and neither the one stored can be read.

How do I fix error 0x800701E3?

Before we head to the slightly complex solutions, here are a few quick ones:

Restart the computer and then try the operation.

Make sure the connections are in order. If you have a spare cable, use it to connect the drive. Use another card reader for the job in the case of an SD card.

If the drive has an indicator light that turns on after it’s plugged in, check whether it lights up.

In some cases, being persistent is all it takes. So we recommend you give it a few more shots because, for some, the transfer went through after a couple of attempts.

If none work, move to the fixes listed next.

1. Run Check Disk

NOTE

Before you proceed, make sure the external drive or SD card, whichever is throwing the error, is connected to the PC.

The Check Disk utility is a built-in tool that identifies issues with storage devices and bad sectors and takes the necessary measures to minimize their effects. And it should work when you get Error 0x800701E3.

2. Use dedicated software to repair your system

Expert tip:

3. Use a Health Check Software

Before we move forward, it’s important to check the drive’s health and identify what percentage of storage on it is available, amongst other critical factors. And that’s where a reliable drive’s health check software comes into the picture.

It will run many tests on the hard drive, identify issues, and present them to you. This helps users figure out when a drive is about to fail to take the necessary action.

4. Repair the corrupt system files

Though unlikely to fix the problem, you can check for corrupt system files, as it has helped a few users. The DISM commands and the SFC scan will identify such files and replace them with the cached copy stored on the system.

5. Format the external drive

In some cases, you will need to format the external storage device when getting Error 0x800701E3 in Windows. You will lose out on the stored data, but it’s the only solution left.

Tip

If nothing so far works, we recommend you take the storage device to a professional or get an effective recovery software to retrieve the stored data and replace the device.

For those planning to get a new one, check our curated list of the best HDDs, cost-effective SSDs, and water-proof SD cards.

Still experiencing issues?

Was this page helpful?

x

Start a conversation

Facetime Camera Not Working On Macbook? Follow This Guide • Mactips

FaceTime camera not working on MacBook? Follow this guide

203

Share

X

X

INSTALL BY CLICKING THE DOWNLOAD FILE

To fix Windows PC system issues, you will need a dedicated tool

Fortect is a tool that does not simply cleans up your PC, but has a repository with several millions of Windows System files stored in their initial version. When your PC encounters a problem, Fortect will fix it for you, by replacing bad files with fresh versions. To fix your current PC issue, here are the steps you need to take:

Download Fortect and install it on your PC.

Start the tool’s scanning process to look for corrupt files that are the source of your problem

Fortect has been downloaded by

0

readers this month.

Protect your Mac on all fronts with unrivalled antivirus technology! Intego is a veteran when it comes to Mac security, bringing you well-researched and tested security features to protect your Mac against malware and cyber threats. Here are the most important features:

Advanced antivirus and PUP protection

VPN with unlimited encrypted traffic

Automatic backup of essential files

Cleaner utility, to speed up your Mac

Parental controls feature

Secure your Mac with Intego!

MacBooks are great for video calls, but what if your MacBook Pro FaceTime HD camera is not working? This can be a problem and the other side won’t be able to see you during the video calls. However, there’s a way to fix this issue.

What to do if FaceTime camera isn’t working on MacBook? 1. Reset the SMC and NVRAM

Several users reported that resetting the NVRAM and SMC can fix the problem. To reset the NVRAM just follow these steps:

Turn off your MacBook and start it again.

During the boot, press and hold Option, Command, P, and R.

You need to keep the keys pressed until:

On models without the T2 chip: The startup sound plays for the second time

On models with the T2 chip: The Apple logo appears and disappears for the second time

You can reset the SMC on models with the T2 chip, by doing the following:

Shut down your MacBook.

Hold the following keys: left Control, left Option, and right Shift.

After 7 seconds, press and hold the Power button without releasing the keys from the previous step.

Keep all keys pressed for 7 seconds and then start your MacBook.

If you own a model without the T2 chip, you need to do the following:

Turn off the MacBook.

Hold the following keys: left Shift left Control, and left Option.

While keeping these keys pressed, press and hold the Power button.

Keep all four keys pressed for 10 seconds. Release the keys and start your MacBook.

2. Make sure apps are allowed to use your camera

Sometimes your FaceTime HD camera isn’t working because apps don’t have the permission to use it. To check the permissions, do the following:

Navigate to Security & Privacy and select Camera.

After doing that, check if the problem is still there.

3. Use the Terminal

Sometimes you just need to end certain processes in order to fix the problems with your camera. To do that, follow these steps:

When the Terminal opens, run the following command:

sudo killall VDCAssistant

After running this command, check if the problem is still there.

In today’s article, we delved into some of the best solutions that you can apply if FaceTime HD camera isn’t working on your MacBook Pro.

FAQ: Learn more about camera issues on MacBook Pro

Why is my camera not connecting to my Mac?

The most common reason your camera is not connecting to Mac is because of another app that’s using the camera, or because of restrictions caused by either firewall or antivirus software.

How do I change my camera settings on my MacBook Pro?

You will not be able to modify any camera settings on your MacBook Pro, as not even the latest versions have any camera settings other than allowing access for a specific app to the camera.

Why is the new MacBook camera so bad?

The company has chosen to install that type of camera on your MacBook because they focused on different aspects of the laptop. The next releases should have a better-quality camera installed.

Was this page helpful?

x

Is Your Wireless Mouse Not Working? Try These Fixes

A Wireless mouse is a little more complex than a standard mouse that plugs into the computer. Since they require a wireless connection, they’re prone to interference and USB dongle problems.

The problem with your wireless mouse may not be apparent at first glance, but a little investigation will help identify it so you can solve it. 

Why is My Wireless Mouse Not Working

Most problems with wireless mice have to do with the method you use to connect them to the computer. Unfortunately, something as simple as a loosely-inserted USB dongle can keep the computer from recognizing the mouse.

Even if the connection is made, specific problems might prevent it from holding the connection. On top of that, issues with the mouse itself can keep it from working even if the wireless connection is stable. 

How to Fix Wireless Mouse not Working

Approach troubleshooting your mouse from a logical perspective to make it as simple as possible. For example, if the mouse can move on the screen, the connection is probably working, and one of the keys on the mouse might be broken. If it works in one program and not another, check program settings before troubleshooting the mouse. 

Of course, the source of the problem can always be something you don’t expect. But using a logical progression to pinpoint it can help save you some time along the way. 

Interference Issues

Certain surfaces can cause wireless signal interference. The connection between your mouse and the computer is weakened or prevented by some problem. There are a few different sources of interference to consider.

Distance is a significant source of interference. If you try to use the mouse too far from the computer, the wireless connection simply won’t happen. While some mice can operate with 30 feet between the device and the computer, that distance is often shortened by other sources of interference.

Physical barriers are another significant source of interference. Walls, metal surfaces, and other impediments can keep the signal from reaching your computer. If you have a large metal desk that you keep the computer under, that metal might be the reason why the mouse isn’t connecting to the computer.

Interference also comes from overcrowded wireless bands. Most devices, including mice, still operate on the 2.4 GHz band, even though 5 GHz and 6GHz bands are becoming increasingly popular.

Even household devices with wireless connectivity can use the 2.4 GHz band; some refrigerators connect to grocery shopping apps or Twitter, for example. The more of these devices you have, the more difficult it is for a mouse on the same band to have a clear connection.

To determine whether interference is the source of your wireless mouse woes, try to eliminate as many of them as possible. 

Place the computer on a solid flat surface with space for your mousepad. 

Turn off all other wireless devices in the area and those that work on the same band as your mouse. 

Plug the USB dongle into the computer.

Turn the computer on.

Turn the mouse on.

Attempt to use the mouse on the computer. If it’s working now when it wasn’t before, try it with different placement in your usual setup.

Unfortunately, problems with interference might require you to move your entire computing setup. There isn’t much you can do to mitigate the problem if that’s the root of your wireless mouse issues because the signal must reach the computer.

Experiment with different positioning until you find something that suits your space and still works with your mouse. If there aren’t too many wireless devices, the distance is close, and the barriers have been resolved, it’s probably another issue. 

Connection Problems

Connection problems can also come from an improperly connected dongle or mouse set incorrectly. You’d be surprised how often people forget they have to turn on their wireless mice! Check the mouse itself and the dongle that you put into the computer to make sure they’re ready to work. 

Flip your mouse over and make sure it’s switched on.

Remove the dongle from the computer.

Shut down the computer.

Plug the dongle into a working USB slot.

Restart the computer.

Try to use the mouse again.

You want to double-check that you’re seating the USB dongle firmly in the computer’s USB slot. A weak or shaky dongle can prevent your wireless mouse from working. Don’t shove it in hard, but do make sure it’s inserted before attempting to use your mouse. 

Power and Charge

Another issue that wireless mice experience is power and charge issues. Different brands use different power sources, but all wireless mice are rechargeable or run on batteries. If your battery charge is low, it might keep the mouse from working.

Don’t just grab batteries from a nearby remote and switch them into your mouse. Some devices can run on low battery power and still work even if the battery charge won’t give you the best performance in another machine. The best thing to do is replace the batteries with fresh ones to test whether that’s the issue.

If your wireless mouse is rechargeable, turn it off and place the charger in the port. Wait until it gets to 100 percent charge before you attempt to use it again.

Sometimes built-in rechargeable batteries start to lose their ability to retain a charge. If you’ve noticed that your mouse is working less and less between charges, it might be time to replace another one. At the very least, start shopping when the charge frequency gets inconvenient. 

Windows Settings Adjustments

There are two main things to concern yourself with on Windows regarding your wireless mouse. First is the driver installation and upkeep, and second, the mouse settings. A problem in either can cause your wireless mouse not to work.

Driver Installation and Upkeep

When you first connect your USB dongle to your computer and turn on your mouse, Windows should start to install the drivers. However, that isn’t always something that triggers exactly when it’s supposed to.

If you have the drivers on removable media or downloaded from the manufacturer’s website, install them. If not, follow these steps to have Windows search for a new device and drivers.

You can also scroll down to the listing for your wireless mouse in the Device Manager and search for new drivers. Out-of-date drivers can often create problems for peripheral devices.

If your mouse isn’t appearing in the Device Manager at all, it might not be connected to the computer. Every device Windows detects should be accessible there. 

Mouse Settings in Windows

You should also check your mouse settings, especially if your problem is related to erratic mouse movement. Sometimes adjusting your settings can improve its behavior or fix issues you didn’t know settings could create.

If you have misconfigured options, it might feel like your wireless mouse isn’t working right. At the very least, checking the settings gives you the peace of mind to know they’re correct. 

Computer Hardware Problems

Sometimes the problem with a wireless mouse is a computer hardware problem. I experienced this one, and it was very annoying to solve because it didn’t occur to me right away.

The motherboard on the computer I was using was never connected to the front USB ports on the computer tower. They weren’t getting any power. However, I didn’t realize that because it wasn’t a computer that I built myself. I plugged in a USB dongle and had no response from my wireless mouse or computer.

If any of your USB ports aren’t working for any reason, it can stop your wireless mouse from making the connection. Check your ports by connecting to other devices. Try different ports.

Each time, give your computer a chance to check for drivers and detect the mouse. You may find a port that works even if a few of them are damaged or disconnected. 

You can also try the wireless mouse on another computer to see whether it works or is broken. 

Common Problems with Wireless Mice Brands

Certain troubleshooting tips only apply to specific wireless mouse brands.

Logitech

The best way to manage your Logitech mouse is with G Hub, the brand’s peripheral device management software. Make sure to open G Hub and check to see that the software detects the wireless mouse. If you don’t have G Hub, download it from the Logitech Website to manage your mouse. 

Make sure you’re running the latest firmware in G Hub too. In 2023, a firmware update wasn’t pushed directly to G Hub users, and they had to download it manually. Doing so fixed a variety of problems with their products. 

If the Logitech mouse you’re using has a reset button, try to use it before troubleshooting the mouse. Hold the reset button for five seconds with the mouse on before attempting to use the mouse again. 

Razer

One fix Razer recommends for wireless mice that aren’t working is cleaning the tracking sensor on the bottom of the mouse with a q-tip dampened with isopropyl alcohol. Make sure to remove the dongle from the computer and turn off the mouse before starting.

They also recommend plugging in the dongle directly to the PC and not into a USB hub. 

If you’re having a calibration issue with a Razer wireless mouse, try to reset it.

Once you’re done, the mouse should be recalibrated. This is particularly good at fixing issues that feel like a laggy connection or something similar. 

Corsair

Corsair has a process you can use to reset a wireless mouse experiencing issues.

Frequently Asked Questions How Do I Reset My Wireless Mouse?

That depends on the brand. Not every wireless mouse has a reset protocol. Check your documentation or the manufacturer’s website for your specific model to see what options are available for you.

Why Aren’t Batteries Working in My Wireless Mouse?

If you’re using new batteries and it still isn’t working, check to ensure the battery area is clean and free of corrosion. Clean it off when the surface is dirty and let it dry thoroughly before inserting new batteries. If it still doesn’t work, you might have to start shopping for a new mouse. 

Can a Wireless Mouse Go Bad?

A wireless mouse will eventually stop working even if you treat it gently and don’t use it very often. The harder and more often you use it, the quicker it will reach the end of its life. 

What Is the Lifespan of a Wireless Mouse?

Update the detailed information about Macbook Pro Is Slow After Update? Try These 5 Solutions • Mactips on the Bellydancehcm.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!