Trending February 2024 # Laptop Wifi Works, But Only If Close Or Right Next To The Router # Suggested March 2024 # Top 2 Popular

You are reading the article Laptop Wifi Works, But Only If Close Or Right Next To The Router updated in February 2024 on the website Bellydancehcm.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested March 2024 Laptop Wifi Works, But Only If Close Or Right Next To The Router

Some users report the issue, where while using a Wi-Fi connection on their laptops, they need to sit very close to the Router, otherwise, Wi-Fi doesn’t work. If you are also facing the issue where the Wi-Fi works, but only if close or right next to the Router, then this article is for you.

In this issue, when the user sits very close or next to a Wi-Fi router, the connection, and internet work smoothly. However, the moment the laptop is moved away from the router or kept in a different room, it will disconnect and throw an error that there is no Wi-Fi.

What causes poor or no Wi-Fi Signal?

One of the possible reasons for poor Wi-Fi Signal can be the router itself. The location of the router and the position of its antennas determines the signal strength. The router’s position also affects the range of the connectivity. Hence, you should try to place the router at the center of your house or office, so that it offers a better coverage area.

The interference is caused due to metals, power cables, or even electrical components. Hence, try to consider these things when placing the router. Sometimes the problem in which Wi-Fi works, but only if close or right next to the Router, occurs when you change the router. Hence, try to re-do the settings of the router. Another possibility could be hardware issues with the laptop’s receiver or a driver.

Wi-Fi works, but only if close or right next to the Router

Set up the network drivers

Check the wireless card or module

Disable the Power Off option for the adapter

Reset the TCP/IP settings on your PC

Run the Network troubleshooter

Let us look at these solutions in more detail.

1] Set up the network drivers

Before you start with this process, make sure that there are no microwaves or air-conditioners working in the vicinity. These devices interfere with the wireless signal and cause it to drop the signal.

Now follow the next steps:

      Now, check the box in front of Delete the software for this device.

      Restart your PC and update the BIOS chipset and Wi-Fi drivers again. While updating the drivers, use Ethernet.

      This should resolve the issue of Wi-Fi not working.

      2] Check the wireless card or module

      If updating the network drivers does not work, then the wireless card may be corrupted. To ensure this, you can run a wireless module test on it.

      Sometimes the wireless module may be faulty. In this case, you would need to get a wireless USB dongle and plug it into one of the USB ports of the computer. Now, connect the wireless USB dongle to the router to connect to the internet. This workaround often resolves the issue. And this is indeed a cost-effective and economical solution.

      Read: Things in your home that can block or obstruct Wi-Fi signal

      3] Disable the Power Off option for the adapter

      One of the solutions for the improper functioning of laptop Wi-Fi is to disable the Power Off option for the adapter. When your PC goes into power-saving mode, it automatically turns off the Wi-Fi adapter. To disallow PC to do so, follow the next steps:

      Open Device Manager by pressing Windows Key and then typing Device Manager in the search box.

      When the Device Manager opens, expand the Network adapters

      In this tab, uncheck the box in front of Allow the computer to turn off this device to save power.

      After you make these changes, test the wireless modem again.

      4] Reset the TCP/IP settings on your PC

      If your Laptop Wi-Fi works, but only if close or right next to the Router, then resetting the TCP/IP settings on your PC may also resolve this issue. Follow the next steps to reset the TCP/IP:

      From the options suggested on the left side pane, select Run as administrator.

      When the Command Prompt window opens, type the following command:

      netsh int ip reset resetlog.txt

        Press Enter.

        Now, restart the laptop and test.

        5] Run the Network troubleshooter

        Sometimes, running the troubleshooter resolves the issue. To run the Network troubleshooter, follow the next steps:

        Press the Windows key, and type Settings in the search bar.

        When the Settings window opens, go to Update and Security

          Follow the steps in the troubleshooter and check if that fixes the problem.

          You can read more about resetting networking components in this article:

          If you need more ideas, perhaps these posts will help you:

          Why does my WiFi only work when I’m close to the router?

          There could be several reasons why your WiFi works only when you’re close to the router. To increase the range of a router to some extent. You can try some of the following ways.

          Check the signal strength by running a speed test.

          Change your router location. Generally, a centrally placed router offers better signal strength than one placed in a corner.

          Change the position of the router antennas to increase the Wi-Fi range.

          Check for any obstructions such as metals, power cables, or even electrical components.

          If nothing works, you need to possibly upgrade to a new router.

          Why I can’t connect my Wi-Fi within the whole house?

          Wi-Fi signal strength depends on a number of factors. Thick walls and distance from the router affect the signal strength majorly and causes it to reduce. As a result, the Wi-Fi signal needs a booster when it has poor strength. Hence, check if the signal is getting blocked by some obstacle or needs a booster in your home.

          You're reading Laptop Wifi Works, But Only If Close Or Right Next To The Router

          How To Close Game Or App On Ps5

          In order to enjoy smooth and lag-free gameplay on PS5, closing games after finishing is mandatory.

          It’s true that when you shut down the PlayStation, all the running games and apps turn off automatically. But it’s not the right way. By continuously doing this, a random bug will create without your knowledge, which will freeze your game while you play.

          Here, I will explain two proper methods to shut down a game or app.

          So, tag along.

          How to Close Games and Applications on PS5

          To close any games or apps on PS5, press the PS button on your Playstation 5 Dualsense controller. Highlight or go over to the game or application you want to close. Press the Options button on your controller and select the Close Game or Close App option.

          Looks easy, right? However, you can check the steps below, where I have provided the steps with images.

          The problem may occur if the games are stuck or freeze. Don’t worry. There is a way to close the game in that situation. I have explained that later in this article.

          Now, let’s see how to close games with the PS5 controller.

          Here are the methods to turn off a game & application on PS5:

          1. From the PS5 Home Menu

          Press the PS Button on your controller to return to the home menu.

          Go over the game or app you want to close.

          Press the Options button on your controller.

          Select the Close Game or Close App option.

          The games or apps will close.

          Here’s a complete guide on how to fix PS5 not downloading games.

          2. From The Switcher Function

          Press the PlayStation button to open the quick menu.

          Select the Switcher option. There you can see which games and apps are still active and have recently been used.

          Go to the game or apps you want to close.

          Press the Options button.

          Select Close Game or Close App.

          The games and applications that are running in the background will be closed. When you open another game from the switcher or turn off your PS5, it automatically turns off other running games.

          But if you keep the PS5 in Rest Mode, it won’t close your recently played games. You may resume playing a game where you left off by keeping it in Rest Mode.

          The two methods work when the PS5 is running. You must also know how to shut down the PS5 games when it freezes or gets stuck.

          In that case, you can’t shut down any games or apps using your controller. You have to do it from the PS5 console.

          Press and hold the power button of the console until it shuts down. 7 to 10 seconds should be enough to shut down the console. Don’t remove the pressure from the power button until you hear the beeping twice. Once you hear the beeps, both the console and the game will shut down.

          Once it’s off, give it a rest for a while. Turn it back on by pressing the power button. Now your PlayStation 5 should run without any drawbacks.

          Quickly check our epic post on PS5 1080p 120hz not working.

          Final Thought

          As you can see, it doesn’t take more than ten to fifteen seconds to close any game. So, don’t turn off your PS5 while there is a game still running. It can negatively affect both the console and the games.

          I hope you successfully close all the games and other applications without complications.

          Comment below if you have any questions.

          Peace!

          9 Ways To Fix Android Connected To Wifi But No Internet

          The first thing you shall do is disconnect and reconnect to the WiFi network. It may sound very basic, but it fixes about half the Wifi-related problems on Android. So, if your phone is not connecting to the internet even after having an active WiFi network, turn the WiFi toggle off and on again to see if it fixes the problem.

          This solution is just an upgraded version of the above fix and works most of the time. All you have to do is forget the WiFi network you are connecting to and then try connecting back to it again.

          3. Tap Forget and to forget and disconnect the WiFi

          Now, connect back to the WiFi network. Ensure that you enter the correct password; otherwise, it’ll keep showing “Connecting, Saved” and won’t connect to the WiFi. If you can’t remember the password, here’s how to see the connected WiFi passwords.

          All internet providers have a web-based dashboard or an app to connect and manage your Wireless broadband account. You can see if the connection is active or not by login into your dashboard. In my case, you can see that the Excitel service and connection are active.

          Alternatively, you can also check the indicator lights on the router to see if something’s abnormal. There can be downtime from the internet service provider as well. Call your ISP’s customer care to check if there’s any problem with their services in your area.

          Restart the Router

          Turn Off Traffic Control

          Open the browser on your computer and navigate to the router’s dashboard. Go to the Advanced tab and select Traffic Control. Disable it if turned on and check if the internet starts working on your phone.

          Reset the Router

          The other option is to reset the router. Doing so will reset all existing settings and configurations and start it with the factory defaults. Usually, the routers have a reset hole where you can insert a SIM ejector tool to trigger the reset.

          Update the Router Firmware

          Is there a firmware update available for your WiFi router? If yes, log in to your WiFi dashboard and allow the software update. Doing so may fix router-specific connectivity and performance issues or bugs that have been identified by the manufacturer.

          Related- 6 Ways to Fix Android Can’t Connect to Wifi But Says Saved, Secured

          DNS servers help translate the website links into IP addresses. If the internet is not working on your Android phone despite being connected to WiFi, it could be an issue with the domain server of your internet service provider.

          Switch to Google DNS

          1. Open Settings on your phone.

          2. Head to Network & Internet.

          5. Next, enter dns.google in the hostname field. Tap Save.

          Switch to Cloudflare DNS

          Alternatively, you can switch to Cloudflare DNS by entering chúng tôi or chúng tôi . You can also use the Cloudflare app to enable it:

          1. Install the 1.1.1.1 app from Google Play Store or App Store.

          3. Tap the Menu and select 1.1.1.1.

          4. Then, go back and enable the toggle.

          Change DNS Settings for WiFi

          Changing the DNS using the above methods will also override for WiFi. However, you do have the option to change DNS in WiFi settings separately. This can fix the WiFi connected but no internet connectivity message. To do so:

          1. Go to WiFi settings and tap the WiFi name.

          3. You can now enter a custom DNS address in DNS1 and DNS2.

          Another thing that you should check is the date and time on your phone. Incorrect data and time settings may cause issues. To fix it:

          1. Open Settings on your Android phone.

          Your phone will automatically sync and adjust the time based on your network and location.

          For some users, enabling MAC Address Randomization in Developer Options fixed the WiFi connected no internet issue on Android. When you turn it on, your Android’s MAC address will change every time you connect to a network.

          To enableMac Address Randomization:

          4. Enable the toggle for WiFi Non-persistent MAC Randomization.

          Android 12 comes with a shortcut to reset the internet on phone. Using it, you can quickly reset your current connection settings and refresh your Wi-Fi network, as shown below:

          Your Android phone will now refresh the WiFi and mobile data connectivity on your phone and then reconnect to the most recently used or preferred local network.

          Here’s how to do it:

          4. Tap Reset Settings to confirm.

          Your saved WiFi passwords, Bluetooth connections, and mobile network settings will be reset. You will now have to reconnect to the WiFi network.

          Uninstall or pause any app which modifies or tweaks network settings on your phone- including VPN, firewall, or DNS-changing apps.

          Factory reset your Android phone. It will reset all the data including personal files, so make sure to take a prior backup.

          Check if other devices are experiencing the same problem. If yes, contact your ISP.

          This is how you can diagnose the situation where your phone is connected to Wi-Fi but has no internet. These fixes will most probably fix anything wrong with your network devices but if none of those worked for you then you have to contact your internet provider for help.

          You can also follow us for instant tech news at Google News or for tips and tricks, smartphones & gadgets reviews, join GadgetsToUse Telegram Group, or for the latest review videos subscribe GadgetsToUse Youtube Channel.

          How To Decide If An Lms Is The Right Fit For Your Business

          Several business functions had to start working on the cloud overnight, all thanks to the International emergency that has confined everyone to their homes. 

          While many business functions were also disrupted, there were also those that were delayed owing to the absence of the right tools in place. 

          If you are reading this article, chances are, employee training was one such function in your case. 

          Whether you are a corporate training administrator or simply someone trying to do something productive with their time, if you have just started accumulating the tools you need to deploy online training, there are some pressing decisions to be made.

          One such decision is choosing the right learning management system (LMS).

          Choosing the wrong LMS can turn out to be a pricey disaster. For starters, LMS, even the affordable ones, are generally a large investment. 

          Moreover, the LMS plays a critical role in the development and deployment of your course content. Choosing a complex LMS can cause serious delays in the delivery of your course material.

          Finally, the LMS is a significant part of the learner’s experience. Choosing a difficult to use LMS will have a negative influence over retention and engagement numbers.

          Now that we have established that choosing an LMS is a decision that is best taken diligently, let’s look at what you must look for in your next LMS:

          User-Friendliness

          If you have read this far, you must have already understood the importance of user-friendliness. An intuitive user experience in an LMS allows learning administrators to use its features to their full capability, allowing them to create immersive learning experiences that leave a lasting impression.

          At the same time, for learners, user-friendliness in an LMS allows them to focus on their course curriculum, instead of having to learn the ropes of the LMS beforehand. 

          This is crucial for businesses and course proprietors alike. For businesses, a complex LMS can mean spending paid manhours learning how the LMS functions. At the same time, for a course proprietor, a complex user experience can mean a poor customer experience, which can negatively affect their future enrollment numbers.

          A good example of a LMS with an intuitive user interface is

          Absorb LMS

          . The LMS is supported by the same team that has developed the platform and they will be happy to help you customise the experience of the user interface and dashboards. 

          Essential Features

          Modern learning management systems come loaded with a variety of features that allow course administrators and creators to make their course curriculum more engaging.

          From the ability to break long-form lessons into bite sized micro-learning modules to gamification features and features that enable social learning, modern LMS are designed keeping the needs of a modern learner in mind.

          With that said, the flexibility and utility of these features may vary between different learning management systems. Moreover, there might be cases where you make use of one particular feature or ability of an LMS, more than the others. For such cases, there are specialised learning management systems.

          A great example of the same is the

          Mindflash LMS

          that specialises in helping learning administrators create immersive video courses.

          Tracking And Reporting Abilities

          From being able to track individual students’ progress to understanding how each student interacts with each lesson, modern LMS are capable of generating insightful reports that help you understand how to help your learners/students better.

          However, not all LMS are made alike and similar, not all of them are equally capable at offering in-depth reports. For this reason, understanding the tracking and reporting capabilities of a prospective LMS becomes one of the most pressing considerations while making a purchase.

          Conclusion

          9 Ways To Fix If Laptop Won’t Shutdown On Windows

          When the shutdown function is called, Windows starts closing all the applications and unloading open handles from memory. Then, it activates the ACPI drivers to cut off power from the battery. But various causes can hinder this process from running smoothly.

          Faulty peripheral devices attached to the laptop can freeze Windows and make it unresponsive to the shutdown function.

          But other than that, some specific causes of the problem have been summarized below:

          Enabled Fast Startup 

          Misconfigured Power Plans

          Windows Update Issues

          Applications Not Closing

          Corrupted chipset drivers or ACPI drivers

          Issues with Intel Management Engine

          From unresponsive shutdown function to tedious shutdown loop scenarios, this article is just prepared for you to solve the ‘Laptop won’t shutdown’ issue.

          Before moving on, try detaching unnecessary peripherals. If the shutdown button isn’t working, try shutdown.exe /s in an elevated command prompt. Or you can try to force the shutdown of your laptop by pressing the power button for more than 10 seconds.

          If the problem persists, follow along with the solutions mentioned below:

          A power cycle can help you reset the I/O devices and the laptop’s battery. And it is also expected to fix laptops stuck within ‘shutdown is in the process loops’. You can follow the steps below to perform a power cycle:

          Detach the power source cable from your laptop.

          Press the power button to close it. If it doesn’t, press and hold the power button for more than 3 seconds to force shutdown.

          Now, take out the battery.

          Then, press and hold the power button for more than 20 seconds. It will drain all the charges from components and will help them refresh their configurations.

          Put the battery back and connect the charger to your laptop.

          Boot it up and check if it resolves the issue.

          In Windows, the control panel has options to re-assign the power button’s function. If the button is assigned to some other functions like sleep, it won’t help you shut down your laptop. Or even if it’s assigned to shut down, some other features like hibernate and fast startup might not let your laptop completely shut down.

          It is because a fast startup, along with hibernation, won’t let a computer properly stop all the kernel functions. Although both come enabled with Windows by default, sometimes they can show noticeable impacts. So, you can disable them with the following steps and resolve the issue:

          Press Windows + R to open Run.

          Type powercfg.cpl and hit Enter to open Power Options (Control Panel).

          Expand the When I press power button: dropdown menus.

          Now open Run, type cmd for Command Prompt, and hit Ctrl + Shift + Enter.

          Many other power settings of Windows can alter how the computer behaves on shutting-down process. Narrowing down specifically would not be feasible if you aren’t aware of the changes.

          So, just to make sure no other settings are causing the issue, you can try to restore the default power schemes with the command. The steps to follow would include the following:

          Open Command Prompt in elevated mode.

          Many of us have definitely experienced delayed shutdowns because of system updates. In ideal situations, it would take some time to update Windows and restart afterwards.

          But if Windows updates run into some trouble, the system gets stuck into restart loops. To fix this, you can run the Windows update troubleshooter:

          Press and hold the power button to force shut down the laptop.

          Boot it up and press Windows + I to open Settings once it starts.

          Follow along with the onscreen steps to complete.

          If that doesn’t fix your problem, you should reset the Windows update components by deleting the downloaded update files and instructions, as well as the state of the update. To do so, follow the steps:

          Open an elevated Command Prompt.

          Your laptop should be able to shut down without a problem.

          Before shutting down, Windows opts to stop every open process on the dynamic memory. So, it asks to close the open app/service or confirms and closes them itself. But, if any application/service doesn’t unload memory while closing, the OS won’t shut down.

          To figure out if any third-party app or service is causing issues, you can enter safe mode. The app/service hindering Windows from shutting down in normal mode won’t cause problems in safe mode because it won’t run at all. To Enter safe mode, you can follow the steps below:

          Hit Apply, and then OK.

          You will Enter the safe mode once the laptop restarts. But, if the laptop doesn’t restart, force restart it three times consecutively with the power button (press and hold). It will load the Windows Advanced startup options.

          Check if it shuts down in Safe boot mode or not. If it does flawlessly, some app/service might be causing problems in normal boot mode, as already mentioned. 

          Now, to figure out which app or service is causing the issue, you will have to go back to the normal boot mode. To do so, follow the same steps as above but untick the Safe boot checkbox and restart the laptop. 

          Now, manually close the open apps/services and try to shut down the laptop. The steps for which have been listed below:

          Press Ctrl + Shift + Esc to open Task Manager.

          Repeat with all the open apps and processes you don’t recognize.

          Now, to disable the processes, Open Run, type msconfig and hit Enter.

          Check and select all the services listed if they aren’t already.

          Hit Apply and then OK.

          Reboot once (mandatory) and try to shut down your computer.

          If it does, try to isolate the problematic app/services. To do so, shut down your computer after opening services on by one. However, this fix would only work after a reboot. If rebooting doesn’t happen as desired, try to force a shutdown by pressing and holding the power button.

          Corrupt Windows systems and Image files may also be responsible for this issue. So, just to give a quick check, you can run the sfc and dism commands. System File Checker and Deployment Image Servicing and Management will repair/replace any damaged system files. You can follow the steps below to run them:

          Open the elevated Command Prompt.

          Intel Management Engine is a system driver and ever-running program that comes along with many intel chipsets. It has access to some protected areas of the system memory, which is sometimes mismanaged due to bugs causing the laptop to be unresponsive to the shutdown command.

          If nothing above fixed your problem on your Intel-powered laptop, try to Uninstall the Intel Management Engine Interface driver from the Device manager.

          Now, try to Shut down your laptop. And if it does flawlessly, the culprit was the very driver. 

          ACPI (Advanced Configuration and Power Interface) drivers are the BIOS extensions or sometimes WindowsOS components for Battery and Power management. When you press the power button, ACPI driver should come into action to provide power to all the electronics by enabling the power supply from the battery. 

          And as already mentioned, during the shutdown, it should do the opposite by cutting off the power supply from the battery. But, if its misconfigured, you can end up to the problem like the one discussed. To fix it, you can reinstall the ACPI drivers by following the steps mentioned below:

          Open Device Manager.

          Windows will automatically reinstall the ACPI drivers.

          If nothing is helping to fix this issue for your laptop, you can perform a system restore to bring back your OS to some healthy point in the past. This will help clear corrupt registry entries and many more. You can do so by following the steps below:

          Open Run.

          Odds are, you may not have previously created any restore point, or the restore point may have deleted while updating, or the issue may not resolve even after restoring the system. In such cases, you can repair upgrade Windows.

          What’s The Better Buy: A Consumer Or A Business Laptop?

          Laptop makers such as Dell, HP, and Lenovo carefully label and target their laptops for either “business users” or “home users,” which implies that they’ve done their homework for you and selected the best models for your type of usage.

          I compared similarly configured consumer and business laptop offerings from several major laptop vendors, and found several good reasons for home users to consider business laptops–including more configuration options and better warranties.

          But it isn’t always a cut-and-dried decision. Here’s what you need to keep in mind when selecting your next laptop.

          Six Reasons to Consider a Business Laptop

          Better durability and build quality: Business laptops are designed to take a beating, literally in some cases. Lenovo’s ThinkPad line of business laptops are military-spec-tested to endure heat, humidity, pressure, shock, and other extremes so that the laptops can survive anything business travelers and outdoor workers toss at them. (Seriously, Lenovo testers even throw laptops out of airplanes.)

          The company’s IdeaPad consumer laptops don’t get that same extreme treatment, because regular laptop users supposedly don’t torture their laptops as much.

          Even if you don’t plan on working in severe conditions, a business laptop’s more rugged design may help you get more long-lasting value out of your laptop, thanks to the use of premium materials. The HP ProBook 4530s laptop for professionals, for example, might look quite similar to the silver HP Pavilion dv6t in the consumer line, but the ProBook 4530s is constructed of “high-strength precision-formed aluminum” while the dv6 simply has a metallic finish. The ProBook’s aluminum is deeply anodized to be scratch-, smudge-, and wear-resistant.

          For instance, Asus reinforces its business-oriented B23E laptop with metal hinges and metal brackets to cushion the hard drive, and tests both the hinges and the panels beyond consumer standards. Here’s some information on how Asus tests.

          More build-to-order options: You’ll find many preconfigured laptop models to choose from in the home/consumer site of any major laptop manufacturer, but if you want to fine-tune a laptop’s specifications to a greater extent, head to the business side.

          Select the business-oriented Lenovo ThinkPad T420 model, on the other hand, and you can opt for a higher-resolution display, swap in a discrete graphics card, upgrade the hard drive, add a fingerprint reader, and much more–at additional cost, of course.

          Longer warranties and better support: If you want more protection for your laptop, business laptop warranties typically trump consumer ones. The Toshiba, Dell, and Asus business laptops I looked at, for example, came with standard three-year warranties, versus a one-year warranty on the consumer models.

          The ThinkPad was configurable for up to a four-year warranty, while the IdeaPad warranty only went up to three years. Each year of additional protection and support is worth between $50 and $100 dollars, and gives you more peace of mind should your laptop break down beyond a one-year period.

          Additional security built in: Because lost business laptops are a huge liability and concern for business owners and IT departments, security features that consumer laptops don’t get are practically standard here. All of the business laptops I looked at offer at least the option to add a fingerprint reader, and many come with TPM (Trusted Platform Module) Embedded Security chips to encrypt your laptop’s data. HP touts its own suite of security tools (“ProtectTools”) that promises to wipe your drive remotely, shred files, check credentials on boot-up, and more.

          More expansion and connectivity options: Want to quickly plug in or unplug your laptop from an external monitor and the many peripherals you own? A business laptop is more likely to have a matching docking station or port replicator, perhaps because business users are more likely to want a setup both at the office and at home, or because they need quick connectivity if they travel often.

          Matte screens: Finally, consumer laptops tend to come with glossy displays that may show vibrant colors but also are subject to terrible glare. Business laptops generally have antiglare displays or at least antiglare options. These screens are easier on the eyes, easier to view outdoors, and have better viewing angles.

          Update the detailed information about Laptop Wifi Works, But Only If Close Or Right Next To The Router on the Bellydancehcm.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!