Trending February 2024 # How To Sync An Xbox One Controller # Suggested March 2024 # Top 8 Popular

You are reading the article How To Sync An Xbox One Controller updated in February 2024 on the website We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested March 2024 How To Sync An Xbox One Controller

Last Updated on May 19, 2023

Knowing how to sync an Xbox One controller – indeed any Xbox controller – is essential to kicking off your gaming journey.

With the Xbox One you can turn on the console without one, but to do anything beyond that you do need a certified and official Xbox One controller. If you don’t have one, you can’t even move through the menu.

So here’s a short and simple-to-follow guide on how to sync your Xbox One controller, as well as a few things to keep in mind about the handheld device.


How To Sync An Xbox One Controller Wirelessly

This is the standard and easiest method to connect an Xbox One controller to the console. Once you have done this method once, it’s likely you’ll remember how to do it from that point on.



Turn On Your Console

First, turn on your console. This can be done on the body of the console. There should be a big button on the front panel next to the disk drive. Press it and it should turn on.



Grab Your Controller

Once the console is on, grab your controller. On the front of the controller, there’s a big button with the Xbox logo on it – in the middle of the controller above the joysticks. Push and hold this button until it begins to flash. When this flashes, it means the controller is turning on.




On the console, there is a ‘Pair’ button. Pressing this button allows the controller to sync with the console. In most cases, this is a small button either next to the disk drive or the on button of the console.



Pair Button

Once the Pair button has been pressed on the console, you need to find the pair button on the controller. This is on the top of the controller, in between the LB and RB triggers.

Press and hold this button. It will flash and then turn a solid color. Once it has turned a solid color, the controller is synced and connected.

Once this process has been completed, then you are free to control and play the games on the console as you like.

Xbox One controllers have a pair button near the middle of the back of the controller


Using A Cable To Sync A Controller

You may also use a cable to sync a controller to the Xbox One console. This method is slightly easier, but it does require the hassle of getting and using a cable.



Turn On Your Console

Turn on your console by pressing the main power button.



Get Your Controller

Grab your controller and connect the cable to the outlet in the top of the controller. Once done, put the other end of the cable into the USB port on the Xbox. This will be near the disk drive or power button.



Sync Your Controller

Press the Xbox button and hold it until the controller syncs with the Xbox.

Once the controller is synced, you actually don’t need the cable anymore, and you can disconnect it from both the controller and the Xbox. The controller will stay synced, and you can play to your heart’s content.

Things to keep in mind

People sometimes have problems connecting their Xbox Ones and their controllers, but these issues are often the result of factors outside the electronics themselves.

As such, here are some things to keep in mind before assuming your controller or console is broken. 

Controllers need batteries or charging, both of which can run out. If your controller doesn’t turn on, check the batteries on the back of it. If you use disposable batteries, try replacing them. If you use a single rechargeable battery, possibly check whether it has run out of charge. 

Syncing is only effective for a limited range. Most wireless products, like Wi-Fi, have an effective limited range of about 20 to 30 feet. This is also true of wireless syncing. Therefore, keep the controller close to your console when trying to sync otherwise it may not work. 

Wireless devices interfere with one another. If you have a lot of wireless devices on at once in a room, it can interfere when you introduce a new one, like when syncing a controller. Make sure that other potentially conflicting devices are off and not transmitting when you try to sync the controller. 


Connecting a wireless controller to your Xbox One should not be too hard, and it definitely shouldn’t be a hassle. It is one of those things that is really easy to do once you have done it once.

Finally, don’t forget, you can also use Xbox One controller on PC if you have games that would benefit from a controller over mouse and keyboard.

You're reading How To Sync An Xbox One Controller

How To Fix Xbox One Sync Button Not Working

In most cases, it is only when your Xbox One controller stops syncing that you realize how important it is. Without a controller to interface with it, your gaming console is nothing more than an expensive piece of techno-art.

Sure, you can use Xbox Smartglass or connect a mouse and keyboard to it, but that won’t afford you the full Xbone experience. You may as well play Xbox 360 games on your PC. But you don’t have to do anything that drastic. You can solve Xbox One sync button and controller issues without contacting a Microsoft specialist. The following guide will show you how. 

Unlike Xbox 360 controllers, Xbox One controllers use Bluetooth. This allows them to be compatible with the ever-popular Xbox Series X. However, this also means that you may run into pairing issues. Usually, when the Xbox One controller experiences any connectivity issues, it will start flashing and disconnecting. 

However, there are rare occasions when your Xbox-One controller will simply refuse to sync/pair without any indication of what is causing the issue. This may lead you to believe that there is something wrong with the Xbox’s sync button. 

However, just because your controller seems to be fine, doesn’t mean it is. Thus, in order to ascertain the cause behind your sync problems, we first need to confirm that it’s not actually controller-related.

Thus, essentially, we need to figure out which point in the connection is malfunctioning. Is the issue related to your controller or the actual console sync button? So in this guide, we’ll explore troubleshooting methods that address both issues. 

The Xbox One’s wireless controller range is 6-9 meters (19-28 ft). Make sure you’re not too far from the console when you’re trying to sync your controller to it. Again, the sync button and pairing function may not be the issue here. You may be simply too far for the Xbox to detect your controller.    

As we’ve stated previously, your Xbox and its controller use Bluetooth to interface with each other. As such, they can be susceptible to interference from other devices that emit radio waves in the same range and frequency. 

Thus, if you have any other Bluetooth-enabled devices near your Xbox, you should relocate them before attempting to use the sync button again. To play it safe, we suggest that you move any devices that emit Wi-Fi or cell phone signals too.

If you have any other peripherals such as keyboards or mice connected to your Xbox One, remove them. Even if the said peripheral is connected via USB, it may still interfere with your Xbox One’s sync function.

In the same way rebooting your computer can solve most operating system-related issues, rebooting your Xbox One can solve console sync issues too. Again, software-related errors may be behind your Xbox’s sync button problems. Sometimes, power cycling may also solve some hardware failures.  Nevertheless, to fully reboot your console do the following: 

Once this is done, try resyncing your controller to your Xbox One using the Xbox One’s sync button.

If you have multiple Xboxes in your house, your Xbox One controller may already be synced to one of them. This may also be the case if you’ve previously connected your Xbox controller to a PC. 

Nevertheless, try checking if your controller is not already synced to another device before you attempt to sync. 

Under normal circumstances, the Xbox controller should have a persistent white light to indicate that it is synced. While the Xbox One may allow for eight simultaneous controller connections, the gamepad can only connect to one device at a time. And thus, while it may seem as if your sync button is behind your connectivity issues, it’s actually because your controller is already connected to another device.     

If restarting or power cycling your console didn’t work, maybe applying the same solution to your controller will. To power-cycle your Xbox One controller, do the following:

Once you’re done power cycling your controller, you can try resyncing the Xbox One.

Sometimes your Xbox One controller’s battery pack isn’t connected correctly. If the contacts between the controller and battery pack aren’t interfacing correctly, this may cause the controller to turn on and off. Furthermore, sometimes this ebb and flow are almost imperceptible, and you may not notice it at first.

Nevertheless, first, ensure that your battery pack is connected. If you’re fairly certain that your battery pack is connected, ensure that it has sufficient power. Try charging or replacing the batteries with fresh ones. In doing so, you may find that your battery pack is faulty and needs to be replaced.

Once you sort your battery issues out, you can try connecting your controller again. If this step doesn’t work, it means that the likelihood of your sync button being behind your pairing issues is high. 

As a last resort, until you can find an official Microsoft Xbox One technician, you can temporarily connect your controller to your Xbox One using a micro-USB cable. All you need to do is run the cable from your controller to one of the USB ports on the Xbox One console. This will help you bypass any syncing issues, whether related to your controller or the sync button. 

On rare occasions when some software fault may be behind your Xbox One’s malfunctioning sync button, you can factory reset it to return it to default settings. Since you’re probably incapable of connecting your controller wirelessly, you’ll need to connect it via USB (see the solution above).

Of course, this assumes that your controller is fully functional too. Once you have your controller hooked up, you can factory reset your Xbox one using the following steps:     

The Xbox One will then erase all operating system data and restart. If your sync button still isn’t working after the factory reset, you can try working through the process again. But instead of choosing the Reset and keep my games & apps option, you should choose the Reset and remove everything option this time. 

In Summary

If none of the above solutions worked for you, then the reason your sync button isn’t working may be due to a hardware-related fault. While you can try to fix it yourself, we do not recommend this. It will most likely void your warranty.

Furthermore, if you don’t know what you’re doing, you could cause more damage and make things worse. Instead, we suggest that you initiate a service request with Microsoft Device Support. If your warranty has expired, you’ll need to pay for the repairs out-of-pocket. 

How To Rollback Xbox Controller Firmware Update

How to rollback Xbox Controller firmware update

Generally, controller firmware refers to the program code that enables the controller to perform all the automation tasks required by the gaming system it operates. A new firmware update for a controller provides new features and comes with fixes and updates that deliver performance improvements.

If your controller is having Bluetooth-related issues after a firmware update, you can choose to revert your controller to an earlier firmware version to correct the problem. You should only revert your controller firmware if your controller is having frequent problems with connections to non-Xbox devices. You can easily roll back Xbox Controller firmware update in either of two ways via PC or Console.

Let’s see the steps involved concerning each of the method. Keep in mind that the option to revert the firmware may not be available for some older model controllers.

Rollback Xbox Controller firmware update on PC

Before you try the procedure, make sure you’re running the latest Windows version/build on your computer and update the Bluetooth driver and Xbox controller driver via Device Manager on your PC and see if that helps. To update the Xbox controller driver via Device Manager on your PC, do the following:

Make sure your Xbox controller is connected to the PC.

Press the Windows key + R to invoke the Run dialog.

In the Run dialog box, type chúng tôi and hit Enter to open Device Manager. Alternatively. press the Windows key + X to open the Power User Menu, and then tap the M key on the keyboard.

Choose Browse my computer for driver software.

Choose the driver named Microsoft Xbox Controller.

Once the driver installation completes the issue should be solved and you won’t need to roll back the Xbox controller firmware update. However, if you’re still having issues with your controller on your PC or other non-Xbox devices, you can proceed with the instructions below to roll back the Xbox Controller firmware update on PC.

On your Windows device, make sure the Xbox Accessories app is installed. The app is available at chúng tôi if you don’t have it.

Next, press the Windows key + E to open File Explorer.

Next, copy and paste the link below into the File Explorer address bar and hit Enter.


This will open the controller firmware reversion screen in the Xbox Accessories app on your device. Alternatively, you can open the Run dialog box and paste in the link above, and hit Enter.

Follow the instructions to revert the firmware.

Rollback Xbox Controller firmware update on Console

To rollback Xbox Controller firmware update on Xbox console, follow these steps:

Press the Xbox button to open the guide.

On the right side, under the My controller has connection issues after the last update, select Check controller firmware to open the controller firmware reversion screen in the Xbox Accessories app.

Follow the instructions in the app.

That’s it!

Read: Xbox Accessories app stuck at 0% Applying update on Controller

What firmware version should my Xbox controller be?

You should always ensure your Xbox controller firmware version is the latest. The latest Xbox controller device firmware whenever available on your console or Windows PC, usually includes fixes and updates that deliver performance improvements to Xbox One controllers with Bluetooth support, Xbox Elite Wireless Controller Series 2, and the Xbox Adaptive Controllers.

Read: How to update Xbox One controller firmware & drivers on PC

Is Xbox or PS5 controller better?

To start with, Xbox controllers don’t have motion sensors, so there’s no way of implementing gyro aiming with the current Xbox controller design. The current verdict is that for modern features, the PS5 DualSense is the best option, but for versatility and battery life, nothing is better than the Xbox Gamepad. However, it all comes down to user preference and there is no clear winner here.

Read: Windows not detecting PS5 Controller.

How To Link An Xbox Account To Microsoft Edge

Microsoft’s Edge browser recently introduced a new dedicated section for Gaming in the news feed. It allows you to keep up with the latest news while also staying up to date with the news about the games you’re currently playing. 

Microsoft has also added a dedicated Xbox widget to the news feed which allows you to track your latest achievements and stats. You can even launch your recently played games through this widget and here’s how you can link it to your Microsoft account to do the same on your PC.

How to link your Xbox account to Microsoft Edge

You will need to be signed into the Xbox app with your Microsoft account. Additionally, there are a few more requirements to make the most of this feature. You can use the section below to get familiar with the requirements and subsequently use the guide to link your Xbox account to Edge. Let’s get started.

What do you need

Microsoft Edge v103.0 or higher

The Xbox app

Your Microsoft account credentials

Step-by-step guide

Related: How to Use Sync on Microsoft Edge: Getting Started and Tips

Step 1: Sign in to the Xbox app (Optional)

Now sign in with your credentials.

Once signed in, you will be taken to the Xbox app homepage. Verify that you’re signed in with the correct account by checking for the current account in the top left corner.

And that’s it! You should now be signed into the Xbox app. You can now use the next step to link your account to Microsoft Edge.

Step 2: Link your Xbox account to Edge

There are two ways to link your Xbox account to Microsoft Edge. You can either use the Xbox widget in your Edge content feed or use your Content feed personalization settings to do the same. Use either of the guides below depending on your preferences. 

Method 1: Using the Xbox Widget

Select either of the following options to enable content on your new tab page based on your preferences.

Content visible: Content will be visible on your new tab page and will occupy most of the screen space.

Content partially visible: Content will be partially visible on your new tab page with 1/3rd of the screen occupied by it.

Headings only: Only headings for the content categories that you subscribe to, will be available at the bottom of your screen.

And that’s it! Your Xbox account should now be connected to Microsoft Edge. 

Method 2: Using Content personalization settings

Now enable the following toggles on your right under Connect to Xbox.

Link Xbox account to Microsoft Edge to personalize my feed

Show recently played Xbox games card in my feed

Restart Microsoft Edge for good measure and your Xbox account should now be linked to Edge.

What happens when you link your Xbox account to Edge in Windows 11?

Once your Xbox account is linked to Edge your news content feed in the Gaming section will be automatically personalized based on various factors. This includes suggestions and personalizations based on your achievements, interests, age, game library, currently played games, and more.

This helps deliver a more personalized experience in your news feed to ensure that you get content and news about gaming that is relevant to you.


Xbox One Randomly Ejects Disc

Xbox One is the most popular gaming console as this provides you with all the online gaming services you look for.

With such an amazing gaming service like Xbox, you can enjoy gaming online, pick-up shooters, or play for long hours.

Xbox 360’s strong library provision is another reason to enhance its popularity. It well meets the requirements of modern gamers than the other competing gaming consoles available in the market.

But sometimes you may face problems when Xbox one randomly ejects disc, and this may give birth to some additional issues.

When you use the physical copies of the games, you need not depend on the internet service for installation and playing titles.

The collectors get overwhelmed with the boxed copies. But when the users get to meet the Xbox one randomly ejects disc error, they wish to move on to the Digital copies.

Sometimes there may be some system bugs to generate the issue that can be addressed by a hard reset. Another reason may be due to persistent storage. Once you clear it, your problem may get solved.

Whatever may generate the issue with the Xbox one, through this article, we will try to address them with proper solutions.

This old simple trick may work wonders to fix many problems related to your gaming console.

Many of the problems related to your Xbox gets easily and effectively resolved using the Power Cycle Trick.

So, if your Xbox misbehaves, try to perform a hard reset or choose the Power Cycle to check the error. There may be a System bug that is creating the Xbox one ejecting disc randomly issue.

Here, I am providing you a guideline to address the error. Follow the steps:

Step 1: First of all, select the Power Button and hold it for at least 10-15 seconds.

Step 2: Then you will have to wait till the console gets shut down completely. Make sure you do not operate any function in between.

Step 3: Allow a few minutes and then restart your Xbox and check if there is any improvement.

When you are muddling with Xbox One Eject Disc By Itself, give your Xbox One a fresh restart.

When you restart your Xbox One if there is any problem with the gaming console it might get resolved instantly. To execute the process, follow the steps described below:

Step 1: Go to the back of your router and remove the plug of the power cable. Keep like that for a couple of minutes.

Do not perform any work in between and let it sit for at least five to ten minutes before you proceed. Then give your Xbox One console a fresh restart.

Step 2: Now open the guide and go to settings. From there choose to Restart Console.

Step 3: When the notification is given, confirm to Restart your Xbox by pressing Yes and after the process starts, allow it to get completed properly.

Step 4: After a few minutes, when the process gets finished, plug in the modem and wait patiently till it gets started.

Next set the connection of the multiplayer once again and check if you get connected to the internet now. Then see whether the prevailing problem got resolved this way.

Clear your Persistent Storage to check the Xbox One Eject Disc By Itself error. First, clean the storage and then perform the Power Cycle once again.

Many users have reported that this process fixed their problem. This seemingly fixed the issue for many users. In case the problem is related to the software, this step is highly recommended to solve the issue.

In case the issue is related to the hardware it will require some replacement and repairing job.

Here, I am describing the entire procedure to clean the Persistent Storage. Follow the steps to execute the process:

Step 1: First of all, turn on your Xbox One Console.

Step 2: Then go to the Home button to open the Menu. From there go to Settings.

Step 3: Now, choose Disc & Blu-ray from the displayed options and then move on to the Persistent Storage.

Step 4: Now, clear the Persistent Storage. Repeat the clearing process three times.

Step 5: Now, select the Power Button and hold it for at least 10-15 seconds.

Step 2: Wait till the console gets shut down completely. Make sure you do not operate any function in between.

Step 3: Allow few minutes and then restart your Xbox One and then place the console on Standby. Check if the problem is resolved.

So, I hope by now, you can find out a suitable solution to Xbox one randomly ejects the disc.

Feel free to shoot us a mail with your ideas or suggestions. We always look forward to hearing back from you.

How To Control Your Xbox One With Google Assistant In Google Home App

How To Control Your Xbox One With Google Assistant in Google Home App

Have a look, Xbox one S vs Xbox one X: Which one is the best Xbox Gaming Station?

Let’s see how you can connect Xbox One with Google Assistant and then use to control media:

How to Enable Connection Between Your Xbox One to Google Assistant?

The integration of Xbox and Google Assistant is a Beta level feature. Since it’s not a mainstream feature, there are a few steps that you need to go through and connect and ultimately control Xbox One with Google Assistant, adding one more integration to Assistant features.

Read More: Best Free Xbox 360 Games to Play

Step 1: Visit this link to proceed for connecting your Xbox One with Google Assistant ?

Xbox for Google Assistant Beta.

Step 3: Confirm the joining in the next step.

Step 4: Now Turn On your Xbox device. Ensure your sign in Microsoft Account is the same one you want to connect to Google Assistant.

Step 5: In your Xbox, head to System.

Step 6: The follow the path Settings ?Devices and Streaming ? Digital Assistants.

Step 7: Here, select the Enable Digital Assistants button.

Read More: All about Xbox Game Bar

Connecting Xbox One to Google Assistant App

Following the completion of the above steps, and making the settings up and notched for a stable connection, follow the steps below:

Step 1: Open the Google Home app.

Step 2: There’ll be an option popping up saying Connect Microsoft Xbox. If not, then tap the (+) icon from the top-left corner to scan and add it.

Step 3: Tap on Set up Device.

Step 4: Select – Have Something Already Setup?.

Step 5: Search and select Xbox when the search is complete.

Step 6: Proceed through the steps ahead until you’re asked to sign in to the Microsoft Account. This should be the same account as linked to your Xbox. Sign-in to it.

Step 7: Confirm the connection by verifying through a link sent by Microsoft to your email.

Step 8: Assign a name and room to your Xbox, and you’re set.

What can you Control via Google Assistant Post-Setup?

– Launch operations -Turn Off/On.

– Reboot

– Launch Game.

– Launch Xbox Applications

– Switch to Television or Dual Mode

– Record

– Screenshot

– Volume Controls including Mute/Unmute

– Pause/Resume Game

– Rewind/Fast-Forward

You can always change the name of your Xbox and then use the new name for the command. The feature, but still, the features are quite effective and add a pinch of further automation to Xbox One. It is also possible to connect more than one Xbox to the Google Assistant via the same app.

Google Home connects many smart devices allowing for voice automation control and helping you sustain a brilliant home. Win Xbox One Integration, you now make your gaming experience more automated than before. The settings explained in this piece can be carried out on both Android and iPhone via Google Assistant.

You May Also Like:

How Google Assistant is Better than Apple Siri and Alexa

Shape-up your life With these Google Assistant Settings

OK Google, It’s Over Now! How to Deactivate Google Assistant?

Tips to protect Your Google Home Assistant 

How to Fix Xbox One Controller Not working!

Quick Reaction:

About the author

Abhishek Sharma

Update the detailed information about How To Sync An Xbox One Controller on the website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!