Trending March 2024 # How To Set Static Ip Address On Windows 10 # Suggested April 2024 # Top 3 Popular

You are reading the article How To Set Static Ip Address On Windows 10 updated in March 2024 on the website Bellydancehcm.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested April 2024 How To Set Static Ip Address On Windows 10

Alternatively, you can configure a static IP address from Command Prompt, PowerShell, and Control Panel.

On Windows 10, setting a static IP address to a computer is a configuration you may need to set up in many scenarios. For instance, if you plan to share files, a printer on a local network, or configure port forwarding.

If you don’t assign a static IP address, services or a port forwarding configuration may eventually stop working. The reason is that, by default, connected devices use dynamic IP addresses assigned by the Dynamic Host Configuration Protocol (DHCP) server (usually the router), which can change anytime, as soon as you restart the machine or after the dynamically assigned configuration lease expires.

This guide will teach you the steps to set a static IP (version 4) address to a Windows 10 device when providing a service on the network or simply configuring port forwarding to your device on the router.

Set static IP address on Windows 10

To assign a static IP address on Windows 10, use these steps:

Using the drop-down menu, select the Manual option.

Turn on the “IPv4” toggle switch.

Set a static IP address to use by the Windows 10 computer.

Specify a “Subnet prefix length” (subnet mask). If the subnet mask is 255.255.255.0, the subnet prefix length in bits is 24.

Specify a “Default Gateway” address.

Specify a “Preferred DNS” address.

Specify an “Alternate DNS address” (if applicable).

After you complete the steps, you can test your settings using your web browser to open a website.

Set static IP address on Windows 10 from Control Panel

To assign a static IP from Control Panel on Windows 10, use these steps:

Open Control Panel.

Select the “Internet Protocol Version 4 (TCP/IPv4)” option.

Select the Use the following IP address option.

Assign the static IP address – for example, 10.1.2.220.

Specify a Subnet mask. Typically, on a home network, the subnet mask is 255.255.255.0.

Specify a Default gateway. (Usually, your router’s IP address. For example, 10.1.2.1.)

Under the “Use the following DNS server addresses set Preferred DNS server” section, set the Preferred DNS server address, usually your router’s IP address or server IP address providing DNS resolutions (for example, 10.1.2.1).

(Optional) Specify an Alternative DNS server, which the computer will use if it cannot reach the preferred DNS server.

Once you complete the steps, you can open your web browser and load a website to see if the configuration works.

Set static IP address on Windows 10 from Command Prompt

To set a static IP address on Windows 10 from Command Prompt, use these steps:

Open Start on Windows 10.

Type the following command to see your current networking configuration and press Enter:

ipconfig /all

Under the network adapter, note the name of the adapter as well as the following information in these fields:

IPv4

Subnet mask

Default Gateway

DNS Servers

Type the following command to assign a static IP address on Windows 10 and press Enter:

netsh interface ip set address name="Ethernet1" static 10.1.4.220 255.255.255.0 10.1.4.1

In the above command, replace Ethernet0 with the name of your network adapter. Change 10.1.4.220 255.255.255.0 10.1.4.1 with the device IP address, subnet mask, and default gateway address corresponding to your network configuration.

Type the following command to set a DNS server address and press Enter:

netsh interface ip set dns name="Ethernet1" static 10.1.4.1

In the command, make sure to change Ethernet0 with your adapter’s name and 10.1.4.1 with the DNS server address of the network.

Type the following command to set an alternate DNS server address and press Enter:

netsh interface ip add dns name="Ethernet1" 8.8.8.8 index=2

In the command, replace Ethernet0 with your adapter’s name and 8.8.8.8 with an alternate DNS server address.

After you complete the steps, you can test the new configuration using the ping command (for example ping chúng tôi to see if the internet is working. Alternatively, you can open a website to see if the configuration works.

Microsoft is in the process of retiring netsh from Windows 10. As a result, you should start using the “NetTCPIP” networking module available in PowerShell instead.

Set static IP address on Windows 10 from PowerShell

Windows 10 also includes the PowerShell command line platform that allows you to use the “NetTCPIP” module to manage networking settings, including the ability to change the IP address settings of your computer.

To set a static IP address with PowerShell, use these steps:

Open Start.

Type the following command to view your current network configuration and press Enter:

Get-NetIPConfiguration

After running the command, note the following information: 

InterfaceIndex

IPv4Address

IPv4DefaultGateway

DNSServer

Type the following command to set a static IP address and press Enter:

New-NetIPAddress -InterfaceIndex 5 -IPAddress 10.1.4.220 -PrefixLength 24 -DefaultGateway 10.1.4.1

In the command, replace the InterfaceIndex number (5) with the corresponding number of your adapter. Change IPAddress with the static IP address you want to assign to your device. Change PrefixLength (subnet mask) with the correct bit number if necessary. Typically on a home network, the setting is 24. Also, change the DefaultGateway option with the default gateway address of the network.

Type the following command to assign a DNS server address and press Enter:

Set-DnsClientServerAddress -InterfaceIndex 5 -ServerAddresses 10.1.4.1

If you need to set a secondary DNS server address, use a comma to use the same command with another address. For example:

Set-DnsClientServerAddress -InterfaceIndex 5 -ServerAddresses 10.1.4.1, 8.8.8.8

In the command, replace the InterfaceIndex number (5) with your network adapter’s corresponding number. Also, change ServerAddresses with the DNS IP address.

After you complete the steps, you can test the new configuration by opening your web browser and navigating a website.

Whatever method you use, assigning an IP address within the network range and outside of the DHCP server scope is recommended to allow proper connectivity and avoid address conflicts. If multiple devices share the same address, this will cause a networking conflict, preventing connection to the internet.

You're reading How To Set Static Ip Address On Windows 10

How To Find The Ip Address On Your Windows Pc

An IP address, or Internet Protocol address, is a series of numbers that acts as an identification for your computer network as well as the device you are using. This IP address allows you to receive information via the internet. Your IP address also can reveal your physical location or may be connected to your ISP’s (Internet Service Provider’s) location. If you’re using a VPN, your IP address changes according to the server your PC is connected to, which changes the associated location.

If you want to be able to see what your IP address is on your Windows PC, you can find it on your desktop. In this article, we’ll show you how to find your IP address on Windows 10.

Table of Contents

How to Find Your IP Address

There are several ways to find your IP address depending on how you access the internet.

If you’re using a Wi-Fi connection, follow these steps:

Go to the

Start

menu, and then

Settings

.

Scroll down to

Properties

and look next to

IPv4 address

. Here you’ll see your IP address.

You can also find your IPv6 address here if you’d like to know that. However, your IPv4 address is commonly known as your IP address.

If you’re using an ethernet connection for the internet, here’s how you can find your IP address:

Go to

Start

, and then

Settings

.

Scroll to

Properties

and look next to

IPv4 address

to find your IP address.

If you aren’t connected to the internet through Ethernet, the Properties section will not appear. So make sure you are connected before you go to check your IP address.

Another Way to Quickly Check Your IP Address

There’s another method to find your IP address on Windows 10, which helps if you need to find it quickly. Again, it’ll be slightly different depending on if you have a wireless network or ethernet connection.

For a Wi-Fi connection:

Under the Wi-Fi network connection you’re currently connected to, select

Properties

.

Scroll down to

Properties

and find the

IPv4 address

, which lists your computer’s IP address.

For an ethernet connection:

Go to the taskbar and select the ethernet connection icon.

Select the ethernet connection.

Scroll to

Properties

, and locate the

IPv4 address

listed there for your IP address.

This method and the one above technically bring you to the same place to find your IP address, so it’s just a matter of which route you prefer to take.

How to Find Your IP Address Online

Another way to figure out your IP address on your computer is by using a browser. It can be a quick way to check if you’re already using the internet, and it won’t necessarily matter whether you’re using Wi-Fi or ethernet to connect.

Here’s how to find it:

On a web browser, head to Google search.

Type “What is my IP address” into the search bar and search.

At the top of the page, you should find your IP address listed.

If you don’t want to use a Google search, there are a number of websites where you can get your IP address, such as chúng tôi Websites like these may also show the location associated with your IP address.

Find Your IP Address Easily

For whatever reason, you want to see what your IP address is, there are many ways to do it on Windows. Keep in mind that if you’re using a VPN and it’s turned on, the IP address you see will not be the actual one associated with your ISP. So if you want your real IP address, be sure to turn any VPNs off. Otherwise, checking your IP address with a VPN can be a good way to check if it’s working.

The methods outlined above are the best for locating your IP address, allowing you to find it quickly and easily for any purpose you need.

How To Use Netsh Interface Ip Set Address Or Dns In Cmd

Windows Command Prompt, also known as CMD, is a versatile and powerful tool that can be used to configure and manage network settings. Among its many features is the ability to set IP addresses and DNS settings for your network interfaces using the “netsh” command. In this article, we’ll explore how to use the “netsh interface ip set address” and “netsh interface ip set dns” commands in CMD or PowerShell to configure your network settings in Windows 11 or 10.

Also see: How to Check IP Address in Windows 11

Netsh, short for “network shell,” is a command-line utility available in Windows operating systems that allows you to configure and manage network settings. It provides a convenient way to interact with Windows networking components, including IP addresses and DNS settings. The netsh interface ip command can be used to manage IP addresses, while netsh interface ip set dns is used for DNS configuration.

Speed: Command-line operations are generally faster and more efficient than GUI operations, allowing you to make changes quickly without navigating through multiple windows and dialog boxes.

Automation: CMD commands can be scripted, making it easier to automate network configuration tasks and apply settings to multiple computers simultaneously.

Remote management: Using command-line tools enables you to remotely manage network settings on other machines within the network.

Troubleshooting: The command line provides more detailed output, which can be helpful in diagnosing and resolving network issues.

Pro tip: How to Find The IP Address of a Website in Windows 10 / 11

Configuring a static IP address can be useful when you need to assign a specific IP address to a device or when setting up a server. Here’s how to set a static IP address using CMD:

Step 1: Open Command Prompt as an administrator

Step 2: View the list of network interfaces

Run the following command to display the network interfaces on your computer:

netsh interface ipv4 show interfaces

Identify the network interface you want to configure (e.g., Local Area Connection, Wi-Fi) and note its index number.

Step 3: Set the static IP address, subnet mask, and gateway

For example, to set the IP address to 192.168.1.10, subnet mask to 255.255.255.0, and gateway to 192.168.1.1 for the interface with index number 3, use the command:

netsh interface ipv4 set address name=3 source=static address=192.168.1.10 mask=255.255.255.0 gateway=192.168.1.1

Step 4: Verify the changes

To verify that the static IP address has been successfully applied, run the ipconfig command:

ipconfig

Check the output to confirm that the IP address, subnet mask, and gateway match the values you provided.

Related issue: Windows 11 Ethernet “Unidentified Network” (How to Fix)

Dynamic IP addresses are assigned by a DHCP server and can change over time. This configuration is suitable for most home and office networks. Here’s how to configure a network interface to use DHCP:

Step 1: Open Command Prompt as an administrator

Follow the same procedure as mentioned earlier.

Step 2: View the list of network interfaces

Run the netsh interface ipv4 show interfaces command to display the network interfaces and note the index number of the interface you want to configure.

Step 3: Set the network interface to use DHCP

For example, to set the interface with index number 3 to use DHCP, use the command:

netsh interface ipv4 set address name=3 source=dhcp

Step 4: Verify the changes

Run the ipconfig command and check the output to ensure that the network interface is now configured to obtain an IP address automatically.

Additional resource: Find MAC Address on Windows 11/10 with or without CMD

DNS settings determine how your computer translates domain names into IP addresses. Here’s how to configure DNS settings for a network interface using CMD:

See also: Change DNS to Google or Cloudflare in Windows 11/10

Step 1: Open Command Prompt as an administrator

Follow the same procedure as mentioned earlier.

Step 2: View the list of network interfaces

Run the netsh interface ipv4 show interfaces command to display the network interfaces and note the index number of the interface you want to configure.

Step 3: Set the primary DNS server

For example, to set the primary DNS server to 8.8.8.8 for the interface with index number 3, use the command:

netsh interface ipv4 set dns name=3 static 8.8.8.8 primary

Step 4: Set a secondary DNS server (optional)

For example, to set the secondary DNS server to 8.8.4.4 for the interface with index number 3, use the command:

netsh interface ipv4 add dns name=3 addr=8.8.4.4 index=2 Step 5: Verify the changes

Run the ipconfig /all command and check the output to ensure that the DNS servers are set correctly for the specified network interface.

To restore the default DNS settings, which allows your computer to obtain DNS server addresses automatically, follow these steps:

Step 1: Open Command Prompt as an administrator

Follow the same procedure as mentioned earlier.

Step 2: View the list of network interfaces

Run the netsh interface ipv4 show interfaces command to display the network interfaces and note the index number of the interface you want to reset.

Step 3: Reset the DNS settings

For example, to reset the DNS settings for the interface with index number 3, use the command:

netsh interface ipv4 set dns name=3 source=dhcp

Step 4: Verify the changes

Run the ipconfig /all command and check the output to ensure that the network interface is now configured to obtain DNS server addresses automatically.

How To Find The Ip Address Of Your Wifi Printer On Windows And Mac

Every WiFi printer will have an IP address assigned to it that will allow the printer to connect to your home or office network successfully. If you’re having issues printing to your WiFi printer, knowing the IP address can be helpful when you start troubleshooting. It’s also useful to know the IP address if you need to install the printer on a different computer. 

There are a few ways you can go about finding the IP address of your WiFi printer on your computer. If the printer has a display, you can usually get the IP address by printing a configuration page via the printer’s control panel. 

Table of Contents

If your printer doesn’t have a display, you’ll need to connect it to your Windows PC or Mac to find the IP address. Below are the steps you’ll need to take to find your printer’s IP address on Windows and macOS. 

How to Find a Printer IP Address on a Windows PC

On a Windows PC, you can find your IP address via the Windows Control Panel, Command Prompt or via Windows Settings.

Find a Printer IP Address on Windows Using the Control Panel

The Control Panel is a collection of tiny programs or applets that allow you to view and configure various Windows system settings. You can use the Control Panel to find your printer’s IP address in a few quick steps. 

Open Control Panel. 

Select Web Services.

Check for your printer’s IP address below the Troubleshooting Information panel. 

Find a Printer IP Address Using Command Prompt

If you can’t find your printer’s IP address via the Control Panel, you can use the Command Prompt instead. 

Type CMD in the search box, press Enter and select the Command Prompt option from the search results. 

Type ipconfig and press Enter.

Find the IPv4 address.

Type ping followed by a space and the IPv4 address and press Enter. 

Next, type arp -a and press Enter. This will load the dynamic and static connections that use the IPv4 address.

Copy the dynamic IP address you got from the arp command. Open your web browser, paste the IP address and press Enter. If you see a printer setup page with the manufacturer’s logo and other printer information like ink levels or printer status, it means the address you pasted is your printer’s IP address. 

Alternatively, you can enter netstat -r in the command line and press Enter. 

You’ll see all the network devices connected to your PC and your printer’s IP address.

Note: You can also find your printer’s IP address by checking for the 12-digit number that appears next to the printer’s physical or MAC address. 

Find a Printer IP Address Via Windows Settings

You can also find your printer’s IP address via the Windows Settings app.

Next, select Devices.

Select Printers and Scanners on the left pane.

Select Printer Properties.

Check for your printer’s IP address next to the Location field.

How to Find a Printer IP Address on a Mac

You can find your printer’s IP address on a Mac via System Preferences, via connected devices on your router or online using the Common Unix Printing System (CUPS). 

Find a Printer IP Address on Mac Via System Preferences

System Preferences on a Mac is where you personalize your Mac’s settings. You can use it to find your printer’s IP address using the steps below.

Next, select Printers and Scanners. 

Select your printer from the left pane. 

Check for the printer’s IP address next to Location.

Find a Printer IP Address on Mac Via Connected Devices on Your Router

You can also find your printer’s IP address on a Mac via TCP/IP settings in the System Preferences menu. 

Next, select Advanced.

Select the TCP/IP tab. 

Copy the default gateway next to Router, open your web browser and paste it into the address bar. 

Log in to the router with your admin ID and password, and then select Connected Devices.

Note: The information listed will be different depending on the router you’re using. However, you can check for words like connected device list, network map, network topology or similar terms. 

Select your printer in the host name field and then check for your printer’s IP address in the IPv4 address section.

Find a Printer IP Address on Mac Using CUPS

CUPS is an open-source, modular printing system for UNIX-like operating systems that allow your computer to act like a print server. You can use CUPS to find your Mac’s IP address as follows.

Next, select Terminal. 

Enter this command in Terminal: cupsctl WebInterface=yes and press Enter. This will enable the CUPS web interface.

Next, open your web browser, type localhost:631/printers in the address bar and press Enter.

Look for your printer’s IP address in the Location column. 

Find a Printer’s IP Address Using Your Printer’s Built-in Menu

Your printer’s built-in menu is another method you can use to quickly find your printer’s IP address. 

Note: For most printers, the steps below should help you find the IP address, but you can refer to your printer’s manual for exact instructions.

Press the printer’s Home button to display the printer menu.

Select either Wireless Settings, Preferences or Options and then check for your printer’s IP address at the top of the box that appears.

Note: If you don’t see the IP address, select View wireless details and check for the IP address there. Some printers may use headings like WiFi Status, Network Status or TCP/IP.

How to Find a Printer’s IP Address Via the Network Configuration Page

If you’ve tried the above steps and still can’t find your printer’s IP address, you can go to the printer’s Settings or Setup page and print it from the network configuration page.

Note: The steps will vary depending on the make and model of your printer. For this guide, we used an HP Deskjet 2600 series printer. 

Press the Wireless and Information buttons simultaneously.

The wireless network test report and network configuration page will be printed out. You can check for your printer’s IP address from the network configuration page. 

Find Your Printer’s IP Address Easily

Now that you know how to find your printer’s IP address, you can set up your printer to your network or fix any connection issues you may be experiencing. 

How To Set Up Wireless Network Connection On Windows Pc

Wireless networks allow you to work independently – without the tension of plugging in long wires that not only look bad in the house but also are a safety hazard. Since wireless signals travel in all directions and travel fast, you can use a wireless network to work from your bedroom or the porch of your home. This article explains how to set up a wireless network connection in Windows 11/10/8/7.

Inventory required to Set Up Wireless Network Connection

Since we are talking of a completely wireless network, we need the following items to set up a wireless network connection:

An operating system that supports wireless networking. Windows is a good operating system that allows you to create wireless networks without any problems.

A fast Internet connection: You can go for either a DSL or cable broadband. In most cases, the cable or DSL router (see point 3 below) is provided by the ISP who also sets up an Internet connection. Normally, the connection from the wall jack (in the case of DSL) and hub (in the case of cable) is wired to the router from where wireless signals take over for communication.

A wireless router: Since we need a wireless network, we will need a wireless router. Check to see if your ISP can give you one. If not, you can get a wireless router from any computer market. Make sure you buy a reputed product for better results. Routers are available in different technologies. I suggest 802.11g or 802.11n for better connectivity and good signals. Routers using the mentioned technologies are more compatible with network adaptors of different companies. Make sure that you are buying a wireless router and not wireless access points. The latter is used to expand existing wired networks and does not serve the purpose of wireless routers.

Wireless Adaptors: Most computers now come with built-in wireless adaptors. They are usually towards the front of laptops and computers and carry a switch that you can turn on and off to enable and disable network connectivity. If your computer does not have one, you can buy wireless adaptors from a computer store. I suggest that you buy USB wireless adaptors as they are quick and easy to install. Also, you can use them with different computers, unlike the card-type adaptors that need to be installed on the motherboards. Also, when buying wireless network adaptors, make sure they match the network technology of the router you are using in the network. That is, if you are using an 802.11n router, your network adaptors should also be 802.11n. This ensures better connectivity.

To check if your computer has wireless network adaptors, proceed with the following steps:

Open Control Panel

If your computer has a wireless network adaptor, it will show you a network icon saying Wireless Network Connection.

Setting Up Wireless Internet Connection on Windows PC

Most ISPs set up an Internet connection when you take a new connection. If your ISP did not set up the Internet for you, follow these steps (assumes your modem includes a wireless router):

Plug one end of the phone wire into the phone jack provided on the router’s back

Plug the other end of the phone wire into the wall jack of the phone connection. If you are using a splitter, connect this end of the phone wire to the splitter socket that says DSL. You can then use another phone wire to connect the splitter to the wall jack of the phone

Plug the router into an electrical socket.

Turn on the main computer that you will use to set up admin privileges.

Open Control Panel. If it is not in the Icon view, switch to the Icon view.

If your modem is different from a wireless router, you will need to connect a phone wire – one end into the modem and another end into a phone jack or splitter. You can then connect the modem to a wireless router using a network cable. You can then follow steps 4 to 7 mentioned above. It should look somewhat like the image below.

At this point, your main computer should be able to connect to the Internet. If it is not connecting to the Internet, the connections must be wrong. Check the Network and Sharing window in Control Panel to see if Windows 7 can detect the wireless network (see figure 1 above). If not, make sure the modem/router is properly connected and switched on.

Related: How to add a new Wi-Fi Network Profile in Windows.

Securing The Network

Assuming that the main computer is now able to connect to the Internet, we will go ahead and configure the network for security.

The wizard will walk you through a series of steps to configure your network

Copy the security key to some safe place so that you can use it when setting up other computers in the network. You will also need it later when you wish to make changes to the network

Setting Up Other Computers On The Network

Select your network (recognized by the name you provided in the wizard above)

Windows will ask you for the password. Enter the password you saved in step 7 above.

Setting Up Sharing On The Network

You have to turn on sharing on all computers, including the ones having devices such as printers and scanners so that you can use them from any computer on the network. The following applies to each computer on the network

Note that you can share files by copying them into Public folder in Windows 7. The Public folder is available in C:Users folder.

Related read: How to set up a Broadband (PPPoE) connection in Windows.

How To Remap Keys On Windows 10

There are a couple of reasons why you might want to remap keys on Windows 10—the layout might feel wrong or the keys might be broken. Unfortunately, Windows doesn’t allow you to remap keys directly. You can map them by altering the registry yourself, which we wouldn’t recommend, or by using third-party software.

One of the easiest keymapping software to use on Windows is SharpKeys. This free and open-source software allows you to map one or multiple keys to another key, although it only supports keyboard keys as mouse or touchpad keys aren’t supported. Here’s how to remap keys on Windows 10 using SharpKeys.

Table of Contents

Installing SharpKeys on Windows 10

A Windows installer file for SharpKeys is available on the SharpKeys GitHub repository, as is a portable version you can download to use on flash storage drives to take your SharpKeys installation with you. SharpKeys is open source, so you can choose to download the source code and compile it yourself if that’s your preference.

To remap your keys on Windows 10, download and install the latest version of SharpKeys from the releases section of the SharpKeys GitHub repository. The installer file is listed as an MSI installer file, or you can download and extract a portable ZIP version.

Once SharpKeys is installed, open it from your Windows Start menu or run the executable file from the extracted folder for the portable version. SharpKeys will warn you that using it will modify the registry, adding a single key to it to remap your keys. Press OK to accept the warning and allow SharpKeys to do this.

The main SharpKeys window will open once the warning has been accepted.

Remap Keys on Windows 10 Using SharpKeys

Once SharpKeys is installed, you can use it to begin remapping your keyboard keys. Before you start, however, you should check whether your keyboard locale is correctly set for your location. This might resolve issues when the at sign keys and quote keys on your keyboard are swapped over, for instance.

If your locale is correct and you still need to remap other keys, you can start using the SharpKeys software. 

You can repeat the above step to map multiple keys. To edit any of the choices you’ve made, select them from the list in the SharpKeys main menu, then press the Edit button. 

Select an item and press the Delete button to remove that particular key mapping from your SharpKeys list. To remove all your key mappings at once, press the Delete All button instead.

The key mappings you create, edit, or delete using SharpKeys won’t apply until you write them to the registry. To do that, press the Write to Registry button in the main SharpKeys window.

Exporting Your SharpKeys Configuration to Other PCs

You may wish to export your SharpKey settings to other Windows 10 PCs if you want to use your remapped keys on multiple devices. You might want to do this before you reset and reinstall Windows on a PC using SharpKeys, too.

In the Save SharpKeys Key List window, select a suitable location to save your SharpKeys configuration file. Give it a memorable name, then press Save to save the file.

Transfer the SharpKeys configuration file (in the SKL file format) to another Windows PC with SharpKeys installed. Open SharpKeys on that PC, then press the Load Keys button in the main window.

Locate your SharpKeys configuration file in the Open SharpKeys Key List window and select it. Press Open to load the configuration file and add the new keys to SharpKeys.

The exported configuration will be imported into SharpKeys, with the key list updating to show the new key mappings. Press the Write to Registry button to write this updated list to the registry.

Using Your Keyboard With Windows 10

If you remap keys on Windows 10, you can bypass broken keys or a poor layout, but that isn’t the only way you can use your keyboard more effectively. One method is to try using keyboard shortcuts, reducing your reliance on your PC mouse or trackpad.

Update the detailed information about How To Set Static Ip Address On Windows 10 on the Bellydancehcm.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!