Trending December 2023 # How To Make Any Wired Printer Wireless In 6 Different Ways # Suggested January 2024 # Top 18 Popular

You are reading the article How To Make Any Wired Printer Wireless In 6 Different Ways updated in December 2023 on the website Bellydancehcm.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested January 2024 How To Make Any Wired Printer Wireless In 6 Different Ways

In the old days, most people who owned a computer had only one in the entire house. If they also had a printer, it was attached to that computer. If you wanted to print something, you’d have to bring those files to that local PC.

Now, each household is filled with networked devices that all have the ability to print. That means it becomes impractical and inconvenient for everyone to access the printer when needed.

Table of Contents

Most new printers these days offer a WiFi connection, but what if you have a wired printer without WiFi? You don’t have to go out and buy a whole new printer. Because (depending on what hardware you have) there’s a way to make virtually any wired printer wireless.

1. Get a Wireless Adapter for Supported Models

This is the most obvious, but possibly the most expensive option. Many printer manufacturers sell a wireless adapter or module that can upgrade your current wired printer to one that can use WiFi or perhaps Bluetooth.

So the first thing you should do is check whether there is an official (or compatible third-party) wireless adapter for your printer. You shouldn’t necessarily buy it right away, but weight up its asking price while you evaluate the other options on the table.

Also, keep in mind that it’s mainly older models of printers that still have this option, so there’s a good chance an official adapter that works with modern Windows probably doesn’t exist for your printer if you bought it recently.

2. Connect It to a Router via USB

Check the back of your internet router. Does it have a USB port? Many routers can now act as a USB host. In most cases that means you can connect an external USB drive and the router will offer it as network-attached storage to devices on the network. Such routers usually also have the ability to work as wireless print servers.

This means you can plug your printer into that USB port, but you most likely have to open up the router’s settings page and toggle the USB port from mass storage to print server duties. Refer to your specific router on how to do this. If you want NAS mass storage functionality, one downside of this method could be that your router can’t do both at the same time.

3. Connect It to a Router via Ethernet

Even though your printer doesn’t have WiFi, it may have an Ethernet port. If that’s the case, you can just connect it with a cable via any of the open Ethernet ports on the back of your router. If you make use of a powerline Ethernet extender, you can connect the printer to your router from virtually anywhere in your home.

Just bear in mind that you’ll most likely need to configure the printer to work properly over Ethernet. That might be something you can do on the printer itself using its screen and buttons. Alternatively, you might have to configure it using software on your PC and a USB connection, or perhaps by logging into the printer over the network.

4. Share Your Printer Through a PC

Most operating systems, including Windows, let you share a printer connected to the computer with other devices on the network. In this situation, the PC that has the printer attached acts as a print server, in addition to whatever else it’s doing.

Assuming that your printer is connected to the computer and working, it’s not hard to share it:

Pick the printer in question and select Manage.

Open Printer Properties, then switch to the Sharing tab.

Now, select Share this printer.

If you like, you can also change the share name of the printer at this point. This is the name that everyone else sees when looking for a network printer to use.

This is probably the fastest and cheapest way to make a wired printer wireless, but it does have significant drawbacks. First of all, your computer has to stay on all the time, otherwise the printer won’t be available.That’s not the most energy-efficient solution, if you care about that aspect of things.

WIth lower-end computers, handling print requests can also affect the performance of that computer, which might not be what you want to happen in the middle of something else.

If you have a printer with an Ethernet port and don’t want to use the powerline adapter method, you can make use of an Ethernet to WiFi adapter. The only catch here is that you will have to connect the printer to a PC first in order to make sure that all the network settings are correct before using the WiFi adapter.

If none of the solutions above work or just don’t suit you, there’s a relatively affordable and reliable solution. You can simply buy a dedicated print server box. This is a little box with a USB connection on one side and an Ethernet port on the other. Inside is a small dedicated computer that has the sole task of accepting network print jobs and then handing them to the printer.

While this does mean your printer has to be connected to the router via Ethernet, it instantly allows all network devices to share that printer. The dedicated print server uses very little electricity and is always available.

There are also wireless dedicated print server devices as well, but they tend to cost a little more than the Ethernet-only variety. So you’ll have to decide if the extra few dollars are worth it.

You're reading How To Make Any Wired Printer Wireless In 6 Different Ways

How To Add A Printer To Any Mac

Printers are a necessary evil. A lot of businesses and government entities still require you to use physical documents. Plus, a lot of people own photo printers where they print off priceless memories. Printers can be finicky, though, and we suspect that’s why you’re here. We’ll do a rundown on how to add a printer to any Mac so you can get your documents or photos printed. For those that also have iPhones laying around, we have a guide on how to install a printer on an iPhone as well.

Make sure your printer is turned on, set up as per the manufacturer’s instructions, and connected to your network.

On your Mac, hit the Apple Logo in the top left corner.

Select System Preferences. Then, select Printers & Scanners.

On the next screen, under the blank white window on the left, hit the Plus button.

Your printer should come up in the next window. Please select it and wait for your Mac to gather printer information.

Once done, hit the Add button.

The printer should now be connected to your Mac, and you should be able to print as needed.

Again, make sure your printer is turned on, set up as per the manufacturer’s instructions, and ready to go.

On your Mac, hit the Apple Logo in the top left corner and select System Preferences.

Next, select Bluetooth. A window should open. Leave it alone for now.

Now, go back to your printer and put it into pairing mode. Each Bluetooth-enabled printer is different, so you may need your owner’s manual to figure out how that works.

Once your printer is in pairing mode, return to your Mac. Turn on Bluetooth in the window you opened earlier.

Your printer should appear under the Devices list on the Bluetooth screen.

Hit the Connect button (or Pair button on older Macs).

Once successfully paired, your Mac should be able to print what you need.

Connect printer wirelessly with its IP address

Joe Hindy / Android Authority

This method is only useful if the Wi-Fi method doesn’t work. It requires a bit of know-how, so don’t get too frustrated if this takes you a second to figure out.

Make sure your printer is set up as per the manufacturer’s instructions, connected to your network, and ready to go.

Next is the hard part. You’ll need to log in with your router and find your printer’s IP address. Each router manufacturer does this differently, so this step might take you a second.

Once you find the IP address of your printer, return to your Macbook.

Hit the Apple Logo in the top left corner.

Select System Preferences. Then, select Printers & Scanners.

Hit the Plus button on the lefthand side of the window.

Enter your printer’s IP address in the first box and select the appropriate Protocol.

Enter the name, location, and use boxes as necessary. Finally, hit Add.

Note — If you don’t know the proper protocol, try first with the default option, which is IPP. If that doesn’t work, try each one until it works. There are only three.

Please note that your printer must be on and connected to your Mac either by Wi-Fi or by Bluetooth in order to print. Also, connecting to your printer may take a minute or two. If you can’t connect, try rebooting your printer and Mac. Then try again.

Note — Apple requires your software to be up to date in order to use this method. Make sure your Mac is up-to-date before continuing.

Additionally, ensure your printer is on, set up as per the manufacturer’s instruction, and ready to go.

Connect your Mac to your printer with a USB cable.

From here, one of two things will happen. Your Mac may ask you to install the printer’s software. Follow the instructions (they vary per printer) and your printer should be good to go when you’re done.

Select Printers & Scanners.

In the next window, hit the Plus button underneath the white section on the left side of the window.

Your printer should be connected and ready to go. Make sure your printer is connected via USB before attempting to print anything.

Connect a printer to a Mac with an ethernet cable

This method is virtually identical to the Wi-Fi method.

Make sure your printer is set up as per the manufacturer’s instructions and ready to go.

Connect your Mac to the printer with your ethernet cable.

On the next screen, select Printers & Scanners.

Hit the Plus button under the white section on the left side of the window.

Your printer should be listed on the next screen. Select it, wait for your Mac to gather printer information, and hit the Add button.

Your printer should be ready to go. Make sure the ethernet cable is plugged in before attempting to print anything.

How to add a printer to Mac with Windows

Joe Hindy / Android Authority

This is, by far, the most complicated setup. It requires both macOS and Windows knowledge along with a Windows computer with a printer already attached to it. We can only see this being needed in a work environment or some wonky home setup where your Windows PC is connected, but your Mac isn’t.

First, the printer needs to be set up as per the manufacturer’s instructions and be ready to go.

Now that all of that is done, let’s get started.

On your Mac, hit the Apple Logo, then System Preferences, and finally Printers & Scanners.

Enter the username and password if prompted. The username and password is determined by the Windows PC owner when they set up the printer to be shared.

Note — If this doesn’t work, there are three main spots to check. You should recheck the printer, the Windows PC, and your Mac to ensure proper setup.

FAQ

The vast majority of the time, there is a sticker somewhere on the back of your printer with that information. If it’s not there, most printers have a network screen that you can view after connecting it to the network. It’ll tell you the MAC address there.

Simply go to File and then select print. A print preview pops up where you can choose to print or not.

6 Ways To Get Better Data In Google Analytics

How to use filters in Google Analytics to get more accurate data

In this article, we will explain how to receive more accurate data using filters.

For a start, keep in mind that filters in GA are designed to help you customize the data seen/viewed in GA, according to the purpose of the report you need to create. You can

Exclude data;

Include data;

Change data;

Search & replace data;

Filters are added only within the “View” menu and here you can create many views if required. A view of the website is basically a copy of the GA data with different settings applied, e.g. you can set access rules, determine the goals for your website, etc. For further information about what the view is and how to add a view check out this material.

Now, log into your GA account, select a “View” menu, and press the “Filter” button.

Select a filter type thoughtfully.

Correct: exclude IP 193.88.222.1

Incorrect: qwerty12345

Before you apply any changes, make sure to consider these details:

Don’t delete or add filters to your original view; experiment with copies of your website views because when you delete a view that particular historical perspective of data is gone.

Google Analytics applies filters exclusively to data that would be added after creating the respective filter, e.g. you cannot filter the data you already have.

Filters are applied in a particular order, in which they are set, so you should specify your selection carefully. It’s important to consider what filters to apply first, second, and so on.

Let us analyze the following example. There is a company X that works in e-commerce in Canada. It has an online store blog with lots of posts, and an active forum. They can ship their products within Canada only, but their website is visited by people from different countries, mainly the U.S. and the U.K.

The visitors from the countries other than Canada don’t convert into sales. So, it makes sense to set the filter “country” like on the image below.

Since Google is case sensitive, it’s possible to get data as shown in the following table:

Page Pageviews

/page1.html 5 → /page1.html 11

/Page1.html 4

/PAGE1.html 2

To analyze the obtained results with ease, apply the following filter in the view.

We recommend this tool developed by Simo Ahava (Google Developer Expert for GA), which allows you to identify and remove the fake hits to the website. They have an in-built database sufficient to accomplish most of these tasks. Here you can find the helpful spam filter tool.

As you probably know from using GA, you have to add a Tracking Code to your website or mobile application before you start receiving GA data, as shown in the example below:

The issue is that anybody can copy your code (accidentally or specifically) and add it on their site or application, so your Analytics will collect information from there. Let’s consider the aforementioned in our sample case and exclude such traffic to collect better data.

If you have a blog or forum on your site, you can exclude this kind of traffic by creating a filter as it is shown in the image below. Company X should definitely consider this option because they have a popular forum, which is also used by their employees.

GA offers a wide functionality and it is sensitive to details. So, a vital task during creating filters is to apply the correct settings, or else GA either will not perform any actions or will measure your data incorrectly. Follow these pro tips to win your way:

Identify and set the filter parameters with your KPIs in mind.

Discover the potential of predefined filters before you get to custom options.

Select the filter order before you start applying anything, especially if you consider using custom filters.

Hire a GA expert if you lack time to configure all the required settings, as receiving wrong data won’t allow you to make the right decisions.

Does Bitcoin Price Hitting Us$100K Make Any Sense?

As known to many, there can be a maximum of 21 million Bitcoin in the network and more and more investors are doing whatever it takes to purchase Bitcoin. With the increasing demand, what comes along is the increase in the price of Bitcoin. Well, if this is to be accounted for then Bitcoin price hitting US$100k does make sense.

Ever since Bitcoin was launched, there has been a constant debate with regard to its acceptance across nations. Though many countries are not in favour of cryptocurrencies, there are some that have opened doors for cryptocurrencies including Bitcoin. As countries continue to ease restrictions pertaining to Bitcoin, the demand for the same is increasing day by day. This is why Bitcoin’s price touching US$100k isn’t that hard to digest.

Today, Bitcoin is considered to be a safe asset against market volatility and inflation. Now that a lot of companies are converting their cash treasuries into cryptocurrency, it is quite obvious to see a surge in the price of cryptocurrencies. Well, that seems to be good enough a point to support the rising price of Bitcoin.

For investors, cryptocurrencies serve to be a store of value and a mode of exchange. Initially, they started off as a legit payment method, but with time, they have established themselves as a new asset class over the past decade. Bitcoin can be accessed very easily and the fact that investors consider it to be a better store of value and a hedge against inflation makes it one of the priciest assets that one can own.

Bitcoin is undoubtedly the favourite cryptocurrency investment. From corporate investors to retail ones, all have a soft corner for it. With the highest market capitalization, Bitcoin holds importance like no other. Over the years, Bitcoin has seen a lot of ups and downs. Despite the volatility, investors continue to invest in it for they know the returns are promising when held for a significant period. Now, the real question that arises is – Does Bitcoin price hitting US$100k make any sense? Well, simply put, the answer to this question is quite subjective as it depends on what an individual investor has to say. To understand whether the price of Bitcoin is justified enough or not, it is important to understand the factors that are responsible for determining its chúng tôi known to many, there can be a maximum of 21 million Bitcoin in the network and more and more investors are doing whatever it takes to purchase Bitcoin. With the increasing demand, what comes along is the increase in the price of Bitcoin. Well, if this is to be accounted for then Bitcoin price hitting US$100k does make chúng tôi since Bitcoin was launched, there has been a constant debate with regard to its acceptance across nations. Though many countries are not in favour of cryptocurrencies, there are some that have opened doors for cryptocurrencies including Bitcoin. As countries continue to ease restrictions pertaining to Bitcoin, the demand for the same is increasing day by day. This is why Bitcoin’s price touching US$100k isn’t that hard to digest.Today, Bitcoin is considered to be a safe asset against market volatility and inflation. Now that a lot of companies are converting their cash treasuries into cryptocurrency, it is quite obvious to see a surge in the price of cryptocurrencies. Well, that seems to be good enough a point to support the rising price of chúng tôi investors, cryptocurrencies serve to be a store of value and a mode of exchange. Initially, they started off as a legit payment method, but with time, they have established themselves as a new asset class over the past decade. Bitcoin can be accessed very easily and the fact that investors consider it to be a better store of value and a hedge against inflation makes it one of the priciest assets that one can own. To put it in simple terms, if the rising Bitcoin price has put you wary of thoughts and you end up thinking that it is probably too late to invest in Bitcoin, well it is time you realise that this is just the beginning. The coming days would see a surge in prices of not just Bitcoin but various other altcoins too.

3 Ways To Make A Yarn Pompom

Use a cup to trace a circle onto a piece of cardboard. This will create the base for your pompom maker. If you want a really big pompom, you can use a small bowl or even an old CD or DVD.[9]

Trace a smaller circle inside the first one. The circle should be ½ to 1 inch (1.27 to 2.54 centimeters) wide. The bigger your outer circle is, the bigger your inner circle should be. Avoid making the inner circle too big, however, or you’ll have a hard time tying your pompom together.

Cut the circles out using a craft blade. Cut your larger circle out first, then the smaller one. You will end up with something that looks like a doughnut. If you are a child doing this craft, ask an adult to help you with this step.

Cut a ½-inch (1.27-centimeter) wide slit into the doughnut. The slit needs to go from the outer edge straight down to the inner edge. This will make wrapping the yarn around your doughnut easier.[10]

Use your doughnut to trace and cut a second one just like it. Stack the doughnuts one on top of the other, and make sure that the slits are aligned. You will be treating these as one doughnut until the very end.[11]

Start wrapping the yarn around your doughnut. The easiest way to do this would be to start at one edge of the slit, going all the way around your doughnut, and finishing at the other edge of the slit.

Keep wrapping the yarn, back and forth, across your doughnut until the center hole is full. Try to wrap as evenly as you can, and not so tightly that the cardboard starts to twist and warp.[12] If you’d like, you can switch yarn colors to create a more interesting-looking pompom.[13]

Cut the yarn. Snip off the excess yarn first, then slid your scissors between the yarn and the cardboard. Pull your scissors towards the edge of your doughnut, and start cutting through the yarn. Hold your yarn together, and don’t let it come apart.

Cut a long piece of yarn, and tie it around the middle of your yarn bundle. Separate your two cardboard doughnuts enough so that you can slide your yarn in between them. Tie the ends of your yarn into a tight knot. Wrap them back in the opposite direction, then tie them into a tight, double knot.[14]

You can choose to snip off the excess pieces of yarn, or you can tie the ends into a loop so that you can hang it.

Carefully pull the cardboard doughnuts off of your pompom. If you need to, you can tear them to make things easier, but keep in mind that if you do that, you won’t be able to reuse them.

Fluff up the pompom. You can do this by gently going through it with your fingers. You can also roll it between your palms instead. Don’t worry if a few pieces of yarn come out.

Neaten and even your pompom out. Your pompom might still have some scraggly bits coming off of it, especially after all that fluffing. Rotate the pompom between your fingers, and snip off any long pieces of yarn that stick out.

6 Ways To Remove Watermark From Video

2. Once the video is uploaded and is on the timeline, drag the selection tool to select the watermark area.

3. Now, you can download a short 5 seconds clip to see, if everything is fine.

4. If you are unsatisfied with the result, you can again follow the steps above to remove the watermark properly.

2. On the next page, inside the editor window, drag the selection tool and adjust its size to fit the watermark. You can add multiple Selection Boxes and videos on this tool.

3. Once the video is uploaded and you will be presented with the video editor window.

6. Set the duration of the watermark from the video from the right pane.

8. On the next page, you need to log in to your Wondershare account or you can create one if you do not have one.

1. Install the Video Eraser App from Google Play Store on your Android phone, and launch it.

2. Allow the required permissions when prompted.

3. Once on the app’s home screen, tap the Remove Video Watermark option.

4. On the next page, drag the selection area to fit the watermark and act as a mask. You can choose from three masking effects to conceal the watermark.

5. Now, tap the Done button at the top right, to export and save the video on your Android phone.

Another Android app you can use to remove the watermark from your video is the Watermark Remover app. It comes with a much cleaner User Interface, with less set of video editing features. Here’s how to use Watermark Remover App.

2. Grant the required permissions when prompted.

3. From the app’s home screen, tap the Remove Watermark option.

5. Now, tap the Export Button to save the final output to your phone. The free version supports up to 720p resolution, for 1080p video export you need to buy the premium plan.

If you are looking for a dedicated app on your Windows and Mac machine, then the MarkGo App from iMyFone can help you remove watermarks from your videos. It offers AI detection for easy removal of any watermark in your video. However, do note that it requires subscribing to a monthly, or yearly plan to export the video, which is not the case with the free online tools listed above.

4. Now, on the editor window, you can switch between AI Removal mode or Manual Removal Mode.

AI Removal Mode – The AI Algorithm automatically Identifies and Removes watermarks, you need to type the text of the watermark.

Manual Removal Mode – Best suited for complex watermarks, as you need to manually select the watermark area.

I found the Manual mode to be more effective for the test watermark in our case, as the AI mode was not able to detect the text watermark from the video.

5. Now, in the case of manual mode, drag the selection tool over the watermark area.

6. Since the software is paid, you need to purchase at least the monthly plan to export the video, which is a downside.

A: There are a bunch of free online tools and apps like chúng tôi video eraser, and more, that you can use to remove a watermark from videos for free.