Trending December 2023 # How To Fix The “Remote Procedure Call Failed” Error In Windows # Suggested January 2024 # Top 20 Popular

You are reading the article How To Fix The “Remote Procedure Call Failed” Error In Windows updated in December 2023 on the website Bellydancehcm.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested January 2024 How To Fix The “Remote Procedure Call Failed” Error In Windows

“Remote Procedure Call,” or RPC, in Windows is a way that programs communicate with one another across a network. But sometimes things can go wrong with the procedure. For instance, if you’re trying to open an app, and it fails to start, your system might display the “Remote Procedure Call Failed” message instead. This tutorial walks you through what you can do to remove this error from your system.

Good to know: learn how to reset Group Policy settings in Windows.

Fixing the “Remote Procedure Call Failed” Error

When encountering the “Remote Procedure Call Failed” error, an issue with a Windows service or application is typically to blame Although hardware failures are also a potential source for the error, they are significantly less common than software problems. Such an error message may appear, for instance, if a client and server are unable to establish a connection.

Causes related to software include corrupt system files, malware infection, and issues with the Remote Procedure Call service. Start by going through these troubleshooting procedures to help narrow down the source of the issue to hopefully fix it.

1. Boot Into Safe Mode With Networking

If the problem is caused by malware, outdated drivers, or conflicting background processes, restarting in Safe Mode with Networking should resolve it. But if you want to learn how to stop background apps and processes from running in Windows, read on.

When you boot into Safe Mode, Windows will load with the minimum set of drivers and applications. If the problem goes away when you switch to Safe Mode, you can conclude that the error is most likely due to a malfunctioning program or driver. If that’s the case, you can use System Restore to revert to a Windows installation when the error was not manifesting.

A virus or malware could also be the source of this error. In this instance, booting into Safe Mode will allow you to execute an SFC scan without malware interfering.

FYI: learn how to use Focus Mode in Windows to boost your productivity levels.

2. Refresh the RPC Service

As explained above, the RPC (Remote Procedure Call) service in Windows manages how processes communicate with one another. It facilitates program collaboration and task completion by coordinating requests and responses.

If, for whatever reason, the service gets corrupted, it may result in the Remote Procedure Call Failed error. Restarting the RPC service could be a possible solution.

Press Windows + R to open a Run dialog.

    Type services.msc in the box that appears.

        Attempt the operation that previously resulted in the RPC failed error.

        3. Run the Windows Store Apps Troubleshooter

        If the problem occurs while you’re trying to run a program from the Microsoft Store, you may want to run the Windows Store Apps troubleshooter.

        Open Settings with the Win + I key combination.

            Select “Other troubleshooters” from the menu.

                Wait for it to detect the problems so that you can apply them.

                  Good to know: learn how to enter BIOS.

                  4. Restart the DCOM Server Process Launcher

                  The DCOM Server Process Launcher (DcomLaunch) service is in charge of managing many Windows services and processes, including the Remote Procedure Call (RPC) service. As a result, you can see if relaunching the DCOM Server Process Launcher helps.

                    Open the Services app as shown above.

                      Select “Restart” on the menu that appears.

                        If the “Restart” option is grayed out, select “Refresh” instead.

                        5. Repair the Faulty Program

                        There’s a chance the program you’re attempting to run is corrupt. To eliminate the error, attempt to repair it using the built-in tool in Windows. If repairing the program doesn’t work, try resetting it. Note that not all apps and programs offer the repair option, but most built-in ones do.

                          Find the program that you were trying to run and press on the three dots next to its name.

                          Select “Advanced options” from the little pop-up menu that shows up.

                            Choose “Repair” from the list that appears – if it is an option.

                              If you can’t find it, select “Reset.”

                              Tip: seeing the chúng tôi BSOD error on your PC? Learn how to solve it.

                              There is no shortage of errors in Windows, and we’ve detailed some of the most common and their fixes. At the same time, keep in mind that Windows updates can also cause errors. Check out this guide to learn about the most recent ones and any possible fixes.

                              Image credit: Freepik. All screenshots by Oluwatokiloba Folami.

                              Oluwatokiloba Folami

                              Oluwatokiloba is a skilled writer and editor who is goal-oriented and innovative. Seeing how far he can go to find new, creative ways to address problems motivates and fascinates him. He likes to workout and listen to music when he is not tinkering.

                              Subscribe to our newsletter!

                              Our latest tutorials delivered straight to your inbox

                              Sign up for all newsletters.

                              By signing up, you agree to our Privacy Policy and European users agree to the data transfer policy. We will not share your data and you can unsubscribe at any time.

                              You're reading How To Fix The “Remote Procedure Call Failed” Error In Windows

                              Fix: Config Initialization Failed Error In Windows 10/11

                              FIX: CONFIG INITIALIZATION FAILED error in Windows 10/11

                              932

                              Share

                              X

                              The config initialization failed Windows 10 error BSoD can be caused by both hardware and software problems.

                              To avoid the

                              security initialization failed Windows 10 error, it is important to constantly install the Windows updates.

                              For a stable system and free from BSoD errors, be sure to update your drivers with the newest compatible versions.

                              Certain hardware issues can also cause this

                              BSoD error, therefore make sure you check all of your PC components.

                              X

                              INSTALL BY CLICKING THE DOWNLOAD FILE

                              Try Outbyte Driver Updater to resolve driver issues entirely:

                              This software will simplify the process by both searching and updating your drivers to prevent various malfunctions and enhance your PC stability. Check all your drivers now in 3 easy steps:

                              Download Outbyte Driver Updater.

                              Launch it on your PC to find all the problematic drivers.

                              OutByte Driver Updater has been downloaded by

                              0

                              readers this month.

                              Blue Screen of Death errors can be caused by faulty hardware or incompatible software, and sometimes it’s difficult to pinpoint the exact problem.

                              Since these errors will crash Windows 10 and restart your computer frequently, it’s important that you fix them, therefore today we’re going to show you how to fix CONFIG INITIALIZATION FAILED error.

                              It is important that you follow the steps thoroughly, so make sure you do that since we will be using the Command Prompt and other methods.

                              How can I fix CONFIG INITIALIZATION FAILED BSoD error? 1. Use a system restoration tool

                              Manually finding out the root of the problem and trying to solve it is not the best and most reliable way to fix such problems. Moreover, it can be quite confusing for those who don’t have the necessary knowledge.

                              Therefore, we suggest installing specialized software that will scan your computer for you and download all the necessary files to repair it and bring it back to perfect condition.

                              Fortect is an application that specializes in Windows repair. It scans and diagnoses your damaged PC, then repairs it using technology that not only repairs your Windows Operating System but also reverses the harm done with a full database of replacement files.

                              Fortect is regarded as a complement to antivirus software, restoring the harm caused by malware after it has been isolated or removed by antivirus.

                              ⇒ Get Fortect

                              2. Update your Windows

                              In order to avoid BSoD errors it’s crucial that you download and install Windows updates.

                              Certain hardware or software might have issues with Windows 10, and since hardware and software issues can create these types of errors, it’s extremely important that you update Windows 10 as often as you can.

                              In addition to many bug fixes, these updates bring improved stability, security as well as new features.

                              3. Update your drivers

                              Another common cause for BSoD errors can be your drivers. Drivers allow Windows 10 to recognize and use certain hardware.

                              And if particular driver is outdated or not compatible with Windows 10, you will most likely get CONFIG INITIALIZATION FAILED error.

                              In order to make sure that your system is stable and free from BSoD errors, be sure to update your drivers frequently.

                              To update a certain driver you just need to visit your hardware manufacturer’s website and download the latest drivers for your device.

                              Alternatively, you can download all the necessary drivers by using the Device Manager.

                              Some users claim that using Device Manager to update your drivers isn’t as effective as downloading them directly from the manufacturer’s website.

                              Device Manager sometimes won’t be able to download the latest drivers, so if you wish to have the latest drivers, you might have to search and download them manually.

                              Update drivers automatically

                              Using an automatic driver updater will certainly save you from the hassle of searching for drivers manually, and it will always keep your system up to date with the latest drivers.

                              ⇒ Get Outbyte Driver Updater

                              4. Run the BSOD Troubleshooter 

                              Now, let’s turn to troubleshooting tools. The very first troubleshooter we’re going to try is Windows 10’s built-in BSOD troubleshooter.

                              Hopefully, this tool can deal with the CONFIG INITIALIZATION FAILED error, as well.

                              5. Run the SFC scan

                              Go to Search, type cmd, and open Command Prompt as an administrator.

                              Enter the following line and press Enter: sfc/scannow

                              Wait until the process finishes (it’s a long one).

                              If the tool finds a corrupt system file, it will automatically repair it.

                              Now, close the Command Prompt and restart your computer.

                              Another troubleshooting tool we’re going to try here is the SFC scan. The system file checker is a command-line tool that basically scans through your system searching for potential issues.

                              If a corrupted system file is a problem, this tool will automatically repair it, and the problem will be resolved.

                              6. Run the DISM scan

                              And the third troubleshooter we’re going to try here is DISM. This tool re-deploys the system image, and resolves potential issues along the way.

                              So, it’s possible that running DISM will also resolve the CONFIG INITIALIZATION FAILED error.

                              Expert tip:

                              With the Windows installation media

                              7. Check the hard drive

                              To perform these commands, you need to know drive letters for all your hard drive partitions.

                              In Command Prompt you should enter the following (but remember to use the letters that match your hard drive partitions on your PC): chkdsk/r c: chkdsk/r d:

                              This is just our example, so keep in mind that you have to perform chkdsk command for every hard drive partition that you have.

                              Restart your computer afterward.

                              A broken hard drive is alarming. And the first warning messages come in the form of BSOD issues. So, go and check the current state of your hard drive.

                              To do that, you should run the chkdsk command. This command will scan your partitions, and apply solutions, if possible.

                              8. Disable caching on your motherboard

                              A Few users reported that disabling the caching on the motherboard has fixed the REFMON INITIALIZATION FAILED Blue Screen of Death error.

                              You can disable caching from BIOS, but for detailed instructions on how to do it, be sure to check your motherboard manual.

                              Since every motherboard is different, so is its interface. Make sure you find out your motherboard’s model and look for your instructions manual that came in its box. There, you’ll most likely find all the information you need.

                              If you’re using an SSD, be sure to update your firmware. Few users reported that they managed to fix the issue by updating their SSD firmware, so you can try that.

                              It’s worth mentioning that updating your firmware might delete all files from that SSD, so keep that in mind.

                              10. Check for problematic software

                              Sometimes certain software can cause CONFIG INITIALIZATION FAILED BSoD error to appear.

                              Almost any installed software can cause this error, and if you installed any new software recently be sure to remove it.

                              A common cause for BSoD errors can be your antivirus software, therefore you might want to remove it in order to fix this error.

                              It’s worth mentioning that almost any antivirus program can cause this error, so be sure to remove any antivirus tool that you have installed.

                              If removing the antivirus fixed the problem, you can now download the latest version of the same tool, or you can switch to a different antivirus software.

                              If you’re looking for an alternative, we wrote about best antivirus programs for Windows 10, so be sure to check them out.

                              If you cannot access Windows 10 at all due to CONFIG INITIALIZATION FAILED error, you can try removing the problematic applications from Safe Mode.

                              To access Safe Mode, do the following:

                              When you enter Safe Mode, try finding and removing the problematic application that is causing the BSoD error.

                              Bear in mind that if your computer is working without any problems in Safe Mode, the BSoD error is probably caused by a certain application or a driver, so you need to find it and remove it.

                              Uninstaller software is meant to swiftly delete any undesirable program along with its associated files, resulting in a safe, fast, and light PC.

                              Logged applications, folders, registries, and any other leftovers will be checked and displayed at a glance, allowing you to swiftly wipe up any leftovers. For stubborn software, such as antivirus, you can also use force removal to start over fresh.

                              11. Check for problematic hardware

                              BSoD errors such as CONFIG INITIALIZATION FAILED can be caused by new hardware, and if you installed any new hardware recently be sure to remove it or replace it.

                              Sometimes certain hardware isn’t fully compatible with your PC and that can cause BSoD error.

                              In addition to new hardware, faulty hardware can also cause these types of errors. RAM is the common cause for these types of errors, so be sure to test your RAM with tools such as MemTest86+.

                              Remember to keep testing your RAM for couple of hours in order to perform a thorough scan.

                              If your RAM is working properly, check other hardware such as your motherboard, hard drive, graphics card, and processor.

                              Was this page helpful?

                              x

                              Start a conversation

                              Fix Multiversus Launch Error, Failed To Get The Process’ Path

                              Are you getting Launch Error – Failed to get the process’ path while trying to play MultiVersus on your PC? MultiVersus is a recent free-to-play crossover fighting game that is developed by Player First Games. It is already getting popular amongst gamers and a lot of users love to play the game. But, some users have reported experiencing Launch Error with the error message Failed to get the process’ path.

                              This error could be triggered due to various reasons. It could occur if you are missing administrator rights to launch the game. Another common reason for this error is the corrupted Easy Anti-Cheat (EAC) software. Besides that, antivirus interference, outdated graphics drivers, corrupted game files, enabled VPN, and third-party application conflicts can be some other reasons causing the error at hand.

                              Now, if you are one of the affected users experiencing the same error when launching MultiVersus on your PC, this post is curated for you. Here, we will be mentioning fixes that will help you fix the Failed to get the process’ path error on MultiVersus.

                              Fix MultiVersus Launch Error, Failed to get the process’ path

                              If you receive Launch Error “Failed to get the process’ path” when trying to play MultiVersus, you can try the below fixes:

                              Reboot your system.

                              Launch MultiVersus as an administrator.

                              Repair Easy Anti-Cheat (EAC).

                              Disable your antivirus.

                              Make sure your graphics driver is up-to-date.

                              Verify your game files.

                              Disable your VPN.

                              Troubleshoot in a clean boot state.

                              Reinstall MultiVersus.

                              Let us discuss the above-mentioned solutions in detail.

                              1] Reboot your system

                              The first thing you should do to fix the error is to restart your PC. There are some temporary glitches or errors in your system triggered by outdated cookies, cache, etc. In that case, restarting your system should fix it. Hence, simply reboot your computer and then try launching MultiVersus to check if the problem is gone or not.

                              If you still receive the same launch error, there might be some other cause of the error at hand. So, you can try the next potential fix to resolve the error.

                              Read: Rockstar Games Launcher Error Code 7002.1 with GTA 5 and RDR 2.

                              2] Launch MultiVersus as an administrator

                              If rebooting your PC doesn’t work for you, try launching the game with administrator privilege. You might be getting the error due to a lack of sufficient permissions to run the game. Hence, if the scenario is applicable, you should be able to fix the error by launching the game as an administrator. In addition to that, you can try launching the game launcher (Steam) with admin rights and see if the error is resolved.

                              Here is the procedure to make Steam and MultiVersus run as an administrator always:

                              Firstly, make sure you have closed Steam and related processes.

                              Then, press Win+E to open File Explorer and then move to the Steam installation directory. You will find it at the following location by default: C:Program Files (x86)Steam

                              In the appeared Properties window, navigate to the Compatibility tab.

                              After that, you need to locate the executable file of MultiVersus which you will find in its installation directory. You will most likely find the application at the following location: C:Program Files (x86)Steamsteamapps

                              Now, repeat steps 4 and for the MultiVersus game.

                              Finally, try launching the game and see if the error is fixed or not.

                              If you still get the same error, you can try the next potential solutions to resolve the error.

                              RELATED: Fix Battlefield 2042 Easy Anti-Cheat Error Code 10011.

                              3] Repair Easy Anti-Cheat (EAC)

                              There are some chances that this error might be triggered because of your Easy Anti-Cheat (EAC) software or the corruption associated with it. EAC is basically used to reduce cheating in online gaming. However, corrupted EAC software can cause a lot of errors and issues in your games. In that case, you can try repairing EAC and see if the error is gone or not.

                              You can follow the below steps to repair EAC:

                              Firstly, open Steam and go to LIBRARY to open your games list.

                              Next, follow the onscreen instructions to complete the repair process.

                              Once done, reboot your PC and run Steam and MultiVersus, and check whether the error is resolved or not.

                              If repairing EAC doesn’t work for you, try the next potential fix to resolve the Failed to get the process’ path error.

                              Read: Valorant Vanguard anti-cheat has encountered an error.

                              4] Disable your antivirus

                              Your overprotective antivirus suite can be the main culprit behind the Failed to get the process’ path error in MultiVersus. It might be blocking the game from launching and triggering the error at hand. So, to check that, you can try disabling your antivirus temporarily and then launch the game. If the error doesn’t appear again, you can be sure your antivirus was causing the error.

                              Now, disabling your antivirus while playing the game is not recommended as it might invite viruses and malware to your system. Hence, you can try adding the MultiVersus game executable to the exception, exclusion, or whitelist of your antivirus. This will prevent your antivirus from blocking the game or related process.

                              If your antivirus is not the problem, you can move on to the next potential fix to resolve the error.

                              Read: Lost Ark Launch Error Code 23, Game client encountered an application error.

                              5] Make sure your graphics driver is up-to-date

                              You can also use the Device Manager app using which you can update all your device drivers manually. Other than that, you can also get the latest version of your graphics driver from the official website of the device manufacturer and then install it on your system. Even using a free third-party driver updater to automatically update graphics and other device drivers is a good option.

                              Once you are done updating your graphics driver, reboot your PC and then try launching MultiVersus to check if the error is fixed or not.

                              6] Verify your game files

                              You might experience the error at hand if the game files are corrupted, broken, or missing. So, if the scenario is applicable, all you have to do is verify and repair the MultiVersus’s game files. Steam provides a dedicated function to verify the integrity of game files. It will check for infected files and replace them with the clean ones available on the servers.

                              To verify and repair game files of MultiVersus on Steam, follow the below steps:

                              First, open the Steam app and move to its LIBRARY section to open up the list of your installed games.

                              Steam will initiate the game files’ verification process.

                              When the process is complete, you can try relaunching the game and see if the error is gone.

                              If the Failed to get the process’ path error still appears when launching MultIVersus, you can try the next potential fix to resolve it.

                              See: Unable to start the game on Ubisoft Connect.

                              7] Disable your VPN

                              If you are using a VPN, try disconnecting it and then check if the error is resolved. Your VPN and Easy Anti-Cheat software might not go well together and thus, cause the error at hand. Hence, if the scenario is applicable, you should be able to fix the error by disabling your VPN. If the error still appears, you can move on to the next potential fix.

                              8] Troubleshoot in a clean boot state

                              Another cause of the error could be third-party software conflicts. Hence, if the scenario is applicable, you can try performing a clean boot state and check whether it resolves the error or not. You can follow the below steps to perform a clean boot on Windows 11/10:

                              Firstly, press Win+R to open the Run dialog box and enter msconfig inside the Open box to bring up the System Configuration window.

                              Now, go to the Services tab and make sure to checkmark the Hide all Microsoft services checkbox. This will ensure that you do not disable any essential Microsoft services.

                              Lastly, reboot your computer and try opening MultiVersus to see if the error is fixed or not.

                              If the error still appears, we have one more fix for you. So, move on to the next potential solution.

                              9] Reinstall MultiVersus

                              If none of the above fixes help you get rid of the error, you can try reinstalling the MultiVersus game to fix the error. This launch error might be triggered because of the corrupted installation of the game. Hence, uninstalling and then reinstalling the game should fix the error. You can follow the below steps to do so:

                              Firstly, open the Steam client and open LIBRARY.

                              Next, complete the uninstallation process by following the prompted guide.

                              When done, reinstall MultiVersus on Steam and launch it to check if the error is resolved.

                              Hopefully, this will fix the error for you.

                              Read: BLZBNTBNA00000012 Error has occurred while launching Call of Duty Warzone Pacific.

                              Why is MultiVersus not launching or opening?

                              MultiVersus might not launch if your PC doesn’t meet the minimum system requirements. Apart from that, missing required administrator permissions can also cause the launch issue. Other than that, outdated Windows OS and graphics drivers can also be one of the reasons why MultiVersus is not launching. Other reasons for the same could be in-game overlays, weak internet connection, antivirus interference, and corrupted game files.

                              How to fix MultiVersus not launching?

                              If MultiVersus is not launching, ensure that your PC fulfills the minimum system requirements to launch the game. You can also try opening the game as an administrator and see if the problem is resolved. Apart from that, update graphics drivers, make sure there is no internet problem, verify the integrity of your game files, disable the overlay apps, or disable your antivirus to fix the problem.

                              Why is MultiVersus down?

                              MultiVersus servers might be down if there is a server outage issue. Or, it might be the case that the servers are under maintenance and thus, are down at the moment. So, to play the game, you will have to wait for the servers to be up and running again.

                              That’s it.

                              Now read: Elden Ring Easy Anti-Cheat Launch Error, Failed to initialize the game launcher.

                              Fix Uninstallation Error 0X80073Cfa, Removal Failed On Windows 11/10

                              When trying to uninstall a Microsoft Store App, a lot of Windows users are seeing Uninstallation Error 0x80073CFA, Removal failed. In this post, we will discuss the same issue and see what you can do to resolve the issue and uninstall the redundant app.

                              The following is the error code users are getting.

                              The error code is 0x80073cfa, in case you need it

                              Some other users are seeing the following error.

                              Package removal failed. You may get this error for failures that occur during the package uninstall.

                              Let us go to the troubleshooting guide.

                              Resolve Uninstallation Error 0x80073CFA, Removal failed on Windows 11/10

                              If you encounter Uninstallation Error 0x80073CFA, Removal failed on your computer, try the following solutions.

                              Run Windows Store App Troubleshooter

                              Reset Windows Store

                              Uninstall in Clean Boot

                              Use a third-party app to remove pre-installed Store apps

                              Repair Windows using Installation Media

                              Let us talk about them in detail.

                              1] Run Windows Store App Troubleshooter

                              Let us start by putting some workload on Windows. Windows Store App Troubleshooter is a built-in Windows utility that lets you scan and repair issues related to Windows Store Apps. And since you are unable to uninstall these apps, this tool can do the job for you. Follow the prescribed steps to do the same.

                              Windows 11

                              Open Settings.

                              Windows 10

                              Launch Settings.

                              Go to Updates & troubleshooter.

                              Hopefully, this will do the job for you.

                              2] Reset Windows Store

                              If the troubleshooter didn’t work, let us try running the reset tool to reset Windows Store. This will not just resolve the issue if it is caused by any kind of misconfiguration, but will also do the job if there is some corrupted cache. This tool not just resets the Store, but also removes the cache. The removed cache will be created again as you restart the Store.

                              3] Uninstall in Clean Boot

                              If there is a third-party application interfering with the uninstallation process, you can uninstall the program in Clean Boot. Clean Boot allows you to stop all the processes but the one you want. So, boot your computer in Clean Boot and uninstall the app. It should do the job for you.

                              Fix: 0x80073cf1 Uninstall error, Package was not found

                              4] Use a third-party app to remove pre-installed Store Apps

                              Users who are getting the error message when trying to remove the pre-installed Windows Store Apps can try to do the same using 10AppsManager. This is a free application that has a simple interface and can be used to remove bloatware from your computer.

                              5] Repair Windows using Installation Media

                              If nothing worked, then there is a high chance that your OS is corrupted. There are various methods to repair Windows, but we would recommend you try repairing your system using Installation Media. It is the most effective method and can be to resolve the issue in question. After repairing your OS, retry uninstalling the program and your issue will be resolved.

                              Hopefully, you are able to fix the error code 0x80073CFA using the solutions mentioned in this post.

                              Read: Completely Uninstall all Windows Store apps using PowerShell script 

                              How do I force uninstall a Program in Windows 11?

                              Read: How to Install or Uninstall Microsoft Store Apps in Windows

                              How do I uninstall appx packages?

                              To uninstall appx packages you need to use PowerShell. So, open PowerShell as an administrator, to do the same, search the app from Start Menu. Once the app is launched, execute the following command.

                              A list of all installed apps and their PackageFullName information will be displayed. You need to note the PackageFullName of the app you want to remove

                              Now execute the following command.

                              You need to replace PackageFullName with the PackageFullName that you noted earlier.

                              These commands will do the job for you.

                              That’s it!

                              Also Read: How to uninstall Pre-Installed Microsoft Store Apps in Windows 11/10.

                              Config List Failed Error On Windows Pcs

                              CONFIG LIST FAILED error on Windows PCs [FULL FIX]

                              925

                              Share

                              X

                              The config list failed is an error many users are familiar with when using Windows 10.

                              We studied the config list failed error on Windows PCs and gathered the best solutions to fix it.

                              Since a few years ago, updating your drivers fixed the config list failed error even in Windows XP.

                              Try a professional driver software and fix the config list failed to boot error once and for all.

                              Although computer errors are relatively common and harmless, certain errors such as CONFIG LIST FAILED BSoD error can be a major problem on Windows 10.

                              These types of errors can be rather troublesome, therefore it’s crucial that you know how to fix them. We have prepared the most efficient solutions, so read the next section.

                              How can I fix CONFIG LIST FAILED BSoD error? 1. Keep Windows 10 up to date

                              Blue Screen of Death errors can be caused by faulty hardware or a certain software that isn’t fully compatible with Windows 10.

                              Therefore sometimes it can be hard to find and fix the cause of CONFIG LIST FAILED error.

                              In order to avoid getting BSoD errors, it’s important to download and install the latest Windows 10 updates.

                              By using Windows Update you’ll download the latest security patches, and many of these patches will also fix various hardware and software issues.

                              By installing the latest patches, you’ll make sure that your computer is stable and safe from BSoD errors.

                              2. Update your drivers

                              Drivers are an integral part of every operating system since they allow your PC to recognize and use your hardware.

                              If a certain driver isn’t compatible with Windows 10, you’ll encounter a BSoD error such as CONFIG LIST FAILED and your computer will crash.

                              Fortunately, updating drivers is rather simple, and in order to do it, you just need to visit your hardware manufacturer’s website, locate your device and download the latest drivers for it.

                              Bear in mind that in order to fix the CONFIG LIST FAILED error, you’ll have to update all major components.

                              This software detects all outdated, missing, or damaged drivers from your computer. Once the scanning is done, you receive a detailed report with all your drivers.

                              In addition, the tool allows you to create a backup for the updated drivers, and ensure the restore point in case you encounter some issues.

                              The last step you have to take is to choose what are the drivers you wish to download and install using Outbyte Driver Updater.

                              3. Run the BSOD Troubleshooter 

                              The next thing we’re going to try is running Windows 10’s built-in troubleshooter. This tool can be used for addressing all kinds of different problems, including BSOD issues.

                              So, it could also resolve the CONFIG LIST FAILED error.

                              4. Run the SFC scan

                              Go to Search, type cmd, and open Command Prompt as Administrator.

                              Enter the following line and press Enter: sfc/scannow

                              Wait until the process finishes (it’s a long one).

                              If the tool finds a corrupt system file, it will automatically repair it.

                              Close the Command Prompt and restart your computer.

                              Another troubleshooting tool we’re going to try here is the SFC scan.

                              The system file checker is a command-line tool that basically scans through your system searching for potential issues.

                              If a corrupted system file is a problem, this tool will automatically repair it, and the problem will be resolved.

                              5. Run DISM

                              And the third troubleshooting tool we’re going to try is DISM. Deployment Image Servicing and Management (DISM) is a tool that re-deploys the system image and resolves potential issues along the way.

                              So, it could be helpful when addressing the CONFIG_LIST_FAILED error, as well.

                              Expert tip:

                              Standard way With the Windows installation media

                              And the third troubleshooting tool we’re going to try is DISM. Deployment Image Servicing and Management (DISM) is a tool that re-deploys the system image and resolves potential issues along the way.

                              So, it could be helpful when addressing the CONFIG_LIST_FAILED error, as well.

                              We have shown you both procedures: standard and the one that utilizes the installation media.

                              6. Run chkdsk

                              If you cannot access Windows 10 due to CONFIG LIST FAILED error, you can run the chkdsk by following these steps:

                              BSoD errors can be caused by corrupted files on your hard drive.

                              7. Uninstall problematic software

                              Certain software can cause a CONFIG_LIST_FAILED error to appear, and in order to fix it, you’ll need to find and remove the problematic software.

                              If you installed or updated any new software recently, be sure to remove it and check if that fixes the problem.

                              It’s worth mentioning that when you uninstall an antivirus, it can sometimes leave certain files and registry entries, and it’s crucial to remove them as well.

                              Many antivirus companies have dedicated uninstaller tools for their software, so be sure to download one of these tools and use it to completely remove your antivirus program.

                              8. Change your hard drive mode from AHCI to ATA

                              While your computer boots, keep pressing F2 or Del. It might be a different F key on your computer, so you’ll have to repeat this process a few times until you find the correct key.

                              In BIOS, find hard drive settings and change the hard drive mode from AHCI to ATA.

                              After you’re done, save changes and restart your computer.

                              According to users, CONFIG LIST FAILED can appear if your hard drive mode is set to AHCI. In order to fix this error, you need to enter BIOS and change it just like we have shown above.

                              9. Run Automatic Repair / Reset Windows 10

                              If the problem still persists, you might want to perform Automatic Repair.

                              If Automatic Repair doesn’t fix the problem, you might have to perform a Windows 10 reset.

                              By performing Windows 10 reset you’ll delete all files from your C drive, so be sure to back them up. After you create your backup, do the following:

                              When the reset process is completed, you’ll have a freshly installed Windows 10 without any applications that can cause the BSOD error.

                              If the problem still persists, it means that it’s caused by your hardware.

                              10. Check your hardware

                              A relatively common cause for CONFIG LIST FAILED BSOD error can be your hardware, so be sure that your hardware is working properly.

                              A most common cause can be your RAM, but almost any major component can cause this error to appear.

                              In addition, if you installed any new hardware recently, be sure to remove it or replace it, since it might not be fully compatible with your PC.

                              CONFIG LIST FAILED BSoD error can be problematic, but users reported that they managed to fix the error by updating their drivers or by changing the hard drive mode.

                              If these solutions don’t work for you, feel free to try other solutions from this article.

                              Was this page helpful?

                              x

                              Start a conversation

                              Fix Valorant Failed To Launch On Windows Pc

                              Does VALORANT fail to launch on your Windows PC? Here are the working fixes to resolve this issue. Valorant is a first-person hero shooter video game which is developed by Riot Games. It is a free-to-play game. Like any other program, it has its shares of errors and issues that are discovered by users over time.

                              VALORANT failed to launch

                              Something happened while trying to launch VALORANT. Try closing and restarting. If the problem persists, contact us at Riot Support.

                              Earlier, we covered VALORANT Vanguard error codes 128, 57, VALORANT Connection Error codes VAN 135, 68, 81, etc. Now, some users have reported being experiencing the “VALORANT failed to launch” error when trying to open the Valorant program on PC. If you are also experiencing the same problem, this post should help you fix it up. In this article, we are going to list some working solutions that will guide you to resolve this issue.

                              Why is my Valorant not opening correctly?

                              Although, there is no clear cause why Valorant is not opening correctly for you. However, it still is a new game, and a lot of its features are in the beta phase. So, you might experience various errors while playing this game. Now, the problem that Valorant is not starting correctly on your PC might be caused due the following reasons:

                              You might be unable to open Valorant correctly due to some Valorant launcher bug.

                              Make sure your PC meets the minimum requirements for Valorant. If it doesn’t, Valorant won’t open correctly.

                              It might occur due to software glitches, like outdated graphics drivers, incorrect installation of the program, etc.

                              If your account is logged in to some other device, it might cause this error.

                              Overclocking graphics cards can be another reason for this error.

                              There might be some Vanguard anti-cheat system glitch.

                              How To Fix Valorant Couldn’t Start Error VALORANT failed to launch on PC

                              Here are the fixes that you can try to fix Valorant failed to launch error on Windows PC:

                              Restart your PC.

                              Check your PC’s specifications.

                              Run Valorant in compatible mode.

                              Run Valorant as Administrator.

                              Update your Graphics Driver.

                              Close CPU Intensive Tasks.

                              Uninstall and Reinstall Valorant and Riot Vanguard.

                              Clean Install the Game and Vanguard.

                              Let us discuss the above-listed solutions in detail now!

                              1] Restart your PC

                              Most of the time a simple restart resolves the problems on your PC caused due to some temporary glitch. Hence, before trying something else, restart your PC and then check if you are able to launch Valorant and see if the problem is resolved. If not, try some other method to fix the issue.

                              2] Check your PC’s specifications

                              Do check whether your PC meets the minimum specs to run Valorant or not. In low-end PCs, you might face a lot of problems including this one while running Valorant. As per its official website, the minimum requirements and recommended to run Valorant on PC are as follows:

                              Minimum specs for Valorant (30 FPS):

                              Operating System: Windows 10/8/7 64-bit

                              RAM: 4GB

                              VRAM: 1GB

                              CPU: Intel Core 2 DUO E8400

                              Graphics Card: Intel HD 4000

                              Recommended specs for Valorant (60 FPS):

                              Operating System: Windows 10/8/7 64-bit

                              RAM: 4GB

                              VRAM: 1GB

                              CPU: Intel Core i3-4150

                              Graphics Card: NVIDIA GeForce GT 730

                              If your PC meets the minimum requirement and you still fail to launch Valorant on your PC, then try some other fix from this post.

                              3] Run Valorant in compatiblity mode

                              Try running Valorant in compatibility mode and see if the program launches properly or not. In case Windows update is conflicting with Valorant or there is some VALORANT game client compatibility issue, this might fix it up. You can try running the Program Compatibility Troubleshooter and see if it resolves the problem.

                              4] Run Valorant as Administrator

                              See: How to make Program always Run as Administrator.

                              5] Update your Graphics Driver

                              If you are using outdated graphics drivers, it might cause problems in launching Valorant on your PC. Many users have reported that they were unable to launch Valorant due to their out-of-date graphics drivers. So, update all your graphics drivers and then restart Valorant to check it launches properly or not.

                              Read: Fix VALORANT game client error codes 43, 7.

                              6] Close all Riot Process and CPU Intensive Tasks

                              If a Riot process is not running properly, you might experience the Valorant launch error. So, try shutting down all the Riot-related processes and relaunch Valorant.

                              Also, you might not be able to launch Valorant on your PC if there are multiple CPU-intensive processes or tasks running on your computer. If there are some other heavy-duty programs that are taking up memory space, you can try terminating all CPU-intensive tasks to fix this up.

                              To terminate all Riot Process and CPU Intensive Tasks, try the below steps:

                              Check for processes or tasks consuming more than 25% of CPU space and Rio processes, and select them.

                              Tap on the End Task button.

                              Try launching Valorant and see if the issue is fixed.

                              Tip: How to kill multiple Processes or end several Tasks at once.

                              7] Uninstall and Reinstall Valorant and Riot Vanguard

                              If none of the above solutions work for you, reinstalling the program might work. So, first, uninstall Valorant and Rio Vanguard programs completely. It is recommended to use a third-party uninstaller to completely remove these programs with their residual files. And then, go to the official website of Valorant and download its latest version. Run the installer and follow the onscreen installation instruction to install the program on your PC.

                              See if this fixes up the problem for you.

                              8] Clean Install Valorant and Vanguard

                              If simple reinstalling the programs doesn’t work, you might need to clean install Valorant and Vanguard programs. To do that, you can follow the below-listed steps:

                              Firstly, disable and end all tasks related to Valorant running on your PC. So, open Task Manager and select Valorant processes, and tap on the End Task button.

                              Now, completely uninstall the Valorant and Vanguard and Riot Valorant and Vanguard programs as discussed in method (7).

                              Next, run the Command Prompt as administrator.

                              After that, enter the following command: sc delete vgc

                              Then, type the sc delete vgk command and press the Enter button.

                              Finally, restart your computer and then install the latest version of the Valorant program.

                              Start the Valorant program and hopefully, you won’t see the Valorant failed to launch error anymore.

                              That’s it!

                              Update the detailed information about How To Fix The “Remote Procedure Call Failed” Error In Windows on the Bellydancehcm.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!