You are reading the article How To Fix “Insufficient Output Amount” On Pancakeswap updated in March 2024 on the website Bellydancehcm.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested April 2024 How To Fix “Insufficient Output Amount” On Pancakeswap
Are you getting an “Insufficient Output Amount” error on PancakeSwap?
Here’s the full error message, “The transaction cannot succeed due to error: PancakeRouter: INSUFFICIENT_OUTPUT_AMOUNT”.
Followed by, “This is probably an issue with one of the tokens you are swapping”.
Many users have faced this issue before when they’re swapping a token on PancakeSwap.
As a result, they are unable to swap the token until the error is resolved.
Fortunately, the error can be fixed in two easy steps.
In this guide, you’ll learn why you’re getting an “Insufficient Output Amount” error on PancakeSwap and how to fix it.Why am I getting an “Insufficient Output Amount” error on PancakeSwap?
You’re getting an “Insufficient Output Amount” error on PancakeSwap because your slippage tolerance is too low.
When your slippage tolerance is too low, your order may fail to execute because the price movement is too high.
Slippage tolerance allows you to set the maximum percentage of price movement you’re willing to take.
For example, if your slippage tolerance is 5%, it means that your order will not execute if the price movement is more than 5%.
Cryptocurrencies are extremely volatile, and slippage tolerance counters them.
Without slippage tolerance, you’d be swapping tokens at market order.
However, setting a low slippage tolerance may prevent your order from getting executed.
By default, the slippage tolerance on PancakeSwap is 0.8%, which is very low.
PancakeSwap states that the “Insufficient Output Amount” error is caused by one of the tokens that you’re swapping.
In most cases, the slippage tolerance is the cause of the error.How to fix “Insufficient Output Amount” on PancakeSwap
To fix “Insufficient Output Amount” on PancakeSwap, you need to increase your slippage tolerance to 12%.
After you’ve increased your slippage tolerance to 12%, you’ll be able to successfully swap your tokens.
Keep in mind that “12%” is just a benchmark that you can follow.
When you face the “Insufficient Output Amount” on PancakeSwap, it’s highly recommended that you increase your slippage tolerance by increments of 1%.
For example, every time you receive the “Insufficient Output Amount” error, increase your slippage tolerance by 1%.
Repeat the process until you’re able to successfully swap your tokens.
By doing this, you’ll be swapping your tokens at the best rate.
Here’s how you can fix the “Insufficient Output Amount” error on PancakeSwap in 2 steps:1. Tap on the Settings icon on PancakeSwap
Firstly, open PancakeSwap on your device.
Then, select the tokens that you want to swap on the exchange.
On the “From” field, select the token that you want to use to swap.
On the “To” field, select the token that you want to swap to.
Next to the “Exchange” header, you’ll see a Settings icon.
Tap on the Settings icon to open the PancakeSwap settings.2. Increase the slippage tolerance to 12%
After you’ve tapped on the Settings icon, the “Settings” pop-up will open.
On the settings pop-up, you’ll see three headers including “Slippage tolerance”, “Transaction deadline”, and “Audio”.
Under “Slippage tolerance”, you’ll see three percentages that you can choose from, including “0.1%”, “0.5%”, and “1%”.
By default, the slippage tolerance on PancakeSwap is 0.8%.
In most cases, a 0.8% slippage tolerance is too low and will cause your order to fail.
To fix this, you can increase your slippage tolerance to 12% on the “%” field.
After you’ve done so, you may get a “Your transaction may be frontrun” error.
Ignore the error message, close the pop-up, and try swapping the tokens again.
This time, you should be able to swap your tokens on PancakeSwap without getting an error.
Alternatively, you can increase your slippage tolerance by increments of 1% each time you get the “Insufficient Output Amount”.
By doing this, you’ll be swapping your tokens at the best rate.
You’ve successfully fixed the “Insufficient Output Amount” on PancakeSwap!Conclusion
The “Insufficient Output Amount” is a very common issue on the PancakeSwap exchange.
As mentioned in the article, the error is mainly caused by a low slippage tolerance.
However, there isn’t a hard-and-fast rule to deal with slippage as there are multiple factors that you need to consider.
For example, you need to consider the volatility of the prices, liquidity, and more before making a decision.
However, if you don’t mind swapping your tokens at a large price difference, then you can increase your slippage as much as you want.Further Reading
How to Buy Spore Finance (SPORE)
How to Transfer Crypto from Coinbase to Binance
3 Ways to Contact Coinbase
You're reading How To Fix “Insufficient Output Amount” On Pancakeswap
In this article, we will see some solutions to fix the Insufficient system resources exist to complete the API error on a Windows 11/10 computer. This error code is associated with the hardware, either the laptop’s touchpad or a USB device. The users who experienced this error have stated that their laptop’s touchpad and some of the USB devices connected to their systems have stopped working suddenly. On viewing the Properties of the device driver in the Device Manager, they saw the following error message:
This device cannot start. (Code 10)
Insufficient system resources exist to complete the API.
The most common cause of this error is corrupted or outdated device drivers. Apart from this, there are some other causes of this error, like insufficient or low disk space. In this article, we have listed some solutions that may help you get rid of this problem.Insufficient system resources exist to complete the API in Windows 11/10
As explained above, low memory or disk space can also trigger this error. Therefore, first, close all the running programs to free up some RAM. If this does not fix the problem, try to free up some disk space. You can move your data from your computer’s hard drive to an external hard disk or you can upload your data to free cloud storage services, like Google Drive, OneDrive, etc.
If you see this error message in the Device Manager, you can try the solutions explained below to fix the problem.
Run the Hardware and Devices Troubleshooter
Update your device driver
Install the driver in Compatibility mode
Use another USB port
Troubleshoot in a Clean Boot state
Perform a System Restore
Reset your PC
Let’s see all these fixes in detail.1] Run the Hardware and Devices Troubleshooter
You can run the Hardware and Devices Troubleshooter and see if it fixes the problem. In the earlier version of Windows 10, the Hardware and Devices Troubleshooter was available in the Settings app. But in the later versions, Microsoft has removed it from the Settings. But you can still run this troubleshooter on your Windows 11/10 device by executing the following command in the Command Prompt.msdt.exe -id DeviceDiagnostic 2] Update your device driver
As explained earlier in this article, the most common cause of the problem is the corrupted or outdated device driver. Therefore, we suggest you update your device driver from the Device Manager. The steps for this are explained below:
Select the driver of the device you are experiencing the issue with.
Now, select the Search automatically for drivers option.3] Install the driver in Compatibility mode
If updating the device driver did not fix your problem, you can try installing the driver in the Compatibility mode. First, uninstall the driver from your Device Manager. After uninstalling the driver, open the location on which you have downloaded the driver from the manufacturer’s website. Now, follow the steps below:
Enable the “Run this program in compatibility mode for” checkbox.
Select the older version of Windows from the drop-down list.4] Use another USB port
If you are experiencing an issue with your USB device, connect it to another USB port and check if the problem persists. For some users, connecting the USB device to USB 3.0 instead of the USB 2.0 port fixed the problem. If you have already connected your device to the USB 3.0 port, disconnect it from that port and connect it to the USB 2.0 port.5] Troubleshoot in a Clean Boot state
The problem might be occurring due to some conflicting programs installed on your device. You can check this by troubleshooting your system in a Clean Boot state. If you find a problematic program on your system, uninstall it and then check if the problem disappears.6] Perform a System Restore
The System Restore has fixed the problem of some users. It is a tool developed by Microsoft that helps users protect and repair their computers. When you run this tool, it creates a snapshot of the Windows System Image files and Windows Registry and saves them as a restore point. If any problem occurs on a Windows computer, the System Restore Point helps users to take their systems to the previous working state without reinstalling the Windows operating system.
If you have created a system restore point, running the System Restore can help you fix this problem.7] Reset your PC
If the System Restore tool did not fix the issue, you can reset your PC to fix this problem. Before resetting your PC, backup all your data on a hard drive.What is Code 10 in Device Manager?
The Device Manager shows Code 10 when Windows cannot start hardware or a USB device connected to the computer. Code 10 is among the Device Manager error codes. You can experience this error with your laptop’s touchpad or any other USB device you connect to your computer, like a speaker, keyboard, mouse, etc. Due to this error, the hardware device does not work. The main cause of this problem is outdated or corrupted device drivers. However, some other causes can also trigger this error.
Drivers are the software that develop a connecting link between the hardware and the operating system. If drivers get corrupted, the communication link between an operating system and the hardware device breaks due to which the hardware device does not work.Why do we have insufficient system resources? How do I fix Insufficient system resources exist to complete the API?
You may see this error message in the Device Manager when your hardware or external USB device connected to your computer stops working. The main cause of the error is the corruption in device drivers. Hence, to fix this problem, you have to update or reinstall your device drivers.
Hope this helps.
Read next: Insufficient system resources exist to complete the requested service.
How to Change Default Sound Output Device in Windows 11/10
There are four different ways using which you can change the default sound output device on Windows 11/10.
In the Taskbar Corner Overflow
In the Settings app
In the Control Panel
In the Game bar
Let’s get into the details of every way you can change the default sound output device.Easily switch between Headphones and Speakers 1] In the Taskbar Corner Overflow
To change the default sound output device,
2] In the Settings app
To change the default audio output device in the Settings app,
Open Settings app
You will see the list of available output devices under the Output panel
3] In the Control Panel
To change the default audio output device in the Control Panel,
Open Control Panel from the Start menu
Change the view to Small icons in the Control Panel
It opens a Sound pop-up window. You will see the list of available sound output devices under the Playback tab4] In the Game bar
To change the default audio output device in the Game bar,
Open Game bar using Win+G shortcutHow to set Audio device as default in Windows 10
We can change default Sound Output Device in Windows 10 in 4 quick and easy ways. We’ll explore this topic under the methods outlined below in this section:
Via Volume icon on Taskbar
Via Settings app
Via Control Panel
Via Game Bar
Let’s take a look at the description of the step-by-step process in relation to each of the method.1] Change Default Sound Output Device via Volume icon on Taskbar
To change Default Sound Output Device via Volume icon on Taskbar in Windows 10, do the following:
Note: You will not see an expansion arrow if you do not have multiple audio playback devices.
2] Change Default Sound Output Device via Settings app
To change Default Sound Output Device via Settings app in Windows 10, do the following:
Press the Windows key + I to open Settings.
Note: You will not be able to choose if you do not have multiple audio playback devices.
Exit Settings when done.3] Set Audio device as default via Control Panel
To change Default Sound Output Device via Control Panel in Windows 10, do the following:
Press Windows key + R to invoke the Run dialog.
In the Run dialog box, copy and paste the command below and hit Enter to open Sound settings.rundll32.exe shell32.dll,Control_RunDLL mmsys.cpl,,0
To set the default playback/sound output device, do one of the actions below:
Select a playback device, and either:
Exit Sound settings panel.4] Change Default Sound Output Device via Game Bar
To change Default Sound Output Device via Game Bar in Windows 10, do the following:
Press Windows key + G to open Game Bar.
Select the default audio output device you want.
Note: You will not be able to choose if you do not have multiple audio output devices.
Exit Game Bar when done.
These are the different ways using which you can change the default audio output device on Windows 11/10.
Related read: No Audio on computer; Sound is missing or not working on Windows.How do I change the default audio output in Windows 10?
There are four different ways using which you can change the default audio output device on Windows 11/10. They are from the Settings app, Taskbar Corner Overflow or System tray, from the Control Panel, and the Game bar.How do I switch between headphones and speakers in Windows 11?
System Restore is a Windows utility to restore your settings and system files. Most users use it to troubleshoot system issues and create registry backups. So, as long as you have appropriate restore points, you can install third-party apps or make other changes to your system free of worry.
If System Restore is not progressing even after four hours, the process is likely stuck. It usually happens on initialization or while restoring registries.
Fortunately, you can often fix this issue with startup repair or running System Restore on safe mode.
Here are the reasons for System Restore getting stuck on your PC:
Temporary issues with your disk.
Bad disk sectors.
Corrupt boot and system files.
Conflicts with your services or software.
Problematic restore point.
If your PC is stuck on System Restore for a prolonged period, the first thing you should do is refresh the process. A refresh fixes the minor issues with the process and you can do so by power cycling your PC.
Whether you are initiating the System Restore from Advanced Startup or inside your account, you need to force shutdown your PC to get out of the System Restore.
Then, power cycle your PC using the steps below:
Disconnect your power cord, laptop battery, and all peripherals.
Press and hold the power button for 20 seconds to drain any capacitor charge.
Reconnect the power cord, laptop battery any essential peripherals (like keyboard or mouse, not others).
Then, power up your PC and try performing System Restore again. If it gets stuck again, apply the possible solutions we have provided below:
It is also possible that the restore point you are using to revert your system has become corrupt. In this case, you need to try another restore point if it’s available.
To do so, after starting the System Restore utility,
It is also possible that the disk sector where the System Restore is mapping your snapshot image has gone bad. You can run the Check Disk utility to account for this scenario. It’s better to run this tool from the Advanced Startup options.
You can access the Advanced Startup or Windows Recovery Environment in many ways, such as:
Then, to run Check Disk,
The corruption of your system files is another possible reason for the issue. The System Restore executable file rstrui.exe itself is a system file in the %WinDir%System32 directory. It also depends on other protected files. To scan and repair corrupt system files, you can run the System File Checker (SFC) and Deployment Image Servicing and Management (DISM). Here are the commands you can run on Command Prompt to use these tools:
DISM /Online /Cleanup-Image /RestoreHealth chúng tôi /LimitAccess (Replace E: with your Recovery drive. The source file may also be chúng tôi instead of install.wim)
If you want to know more about these diagnostic tools or encounter some issues, you can check out our article on How to Repair Corrupted Windows Files.
If you are running System Restore from inside your account, it is possible for the process to get stuck due to interference from incompatible software or services.
If System Restore continues getting stuck, you need to run the process from Advanced Startup to avoid any conflicts. You can also use this method if you can’t log in to your account after a hard reboot.
Then, try restoring your system directly from the Advanced options. To do so,
Executing this method with the Windows Recovery or Installation Drive gives the highest success rate. Since you want to restore your system, your system or boot files likely have some issues. So, using a Recovery Drive, with its own boot and system files, is the more effective solution.
You can also try running this process in safe mode. Here’s how you can do so:
If the Advanced Startup System Restore gets stuck on initialization, it indicates errors on your boot manager. You need to run Startup Repair to resolve this issue. Here’s how you can do so:
If Startup Repair doesn’t resolve the issue, you can rebuild your BCD and rerun Startup Repair.
If the previous solutions were ineffective, your last resort is to reset or reinstall Windows. First, try resetting your PC while keeping your files. Follow the steps below for this purpose:
If resetting doesn’t resolve the issue, make a clean reinstall of Windows using an installation media.
It usually takes about 30-45 minutes to complete a system restore. And it can take up to 1.5-2 hours if your PC is running slow.
However, the process can also temporarily get stuck if there are any issues with your disk. To be safe, we recommend waiting up to 4 hours before trying to troubleshoot this issue.
System Restore reverts your PC to the state of the restore point. To do so, it rolls back any changes you have made and deletes all recently installed apps and drivers. All your personal files except the user application settings remain untouched.
You can also check for affected apps on the System Restore GUI before finalizing the process.
This problem could be caused by connectivity issues, such as a faulty wire or a dead battery. If the mouse settings are misconfigured, this can also cause the mouse to freeze. This is very likely if you are using a mouse control software.
The causes of mouse freezes can be numerous and difficult to identify at first glance. Today, we will discuss those causes as well as their relevant fixes.
Misconfiguration of Pointer Speed
Issues with the Mouse Drivers
System Files Corruption
Malware and Virus Infection
Here are some preliminary troubleshooting measures that you can take to resolve this issue:
Use a smooth surface to operate, ideally a mouse pad, and also clean the mouse.
Connect a spare mouse and see if it also freezes. This also helps to identify if the problem is with the mouse or the system itself.
Restart the computer to ensure that the problem is not caused by temporary glitches in the Operating system.
Signal interference can affect how a wireless mouse functions. Maintain close proximity to your computer to combat this.
If these troubleshooting measures do not work for you, follow these fixes to get your mouse functioning normally. While attempting these fixes, you can navigate through the Windows Settings using the Keyboard.
The majority of the time, Mouse freeze does not occur due to issues with the mouse or its drivers. Background processes that consume resources contribute to system slowdown and can cause the mouse to freeze.
Follow these steps to end such background processes.
Press Ctrl + Shift + Esc to open the Task Manager.
In the Processes section, search for the processes or applications with High CPU usage.
Navigate to the process and press the Menu key on your Keyboard.
Select the End Task and close the Task Manager.
Now, use the mouse to see if it is working normally.
This feature enhances the mouse acceleration by adjusting the DPI. It automatically changes the DPI when the mouse cursor is moved. If the system does not handle this adjustment correctly, this might slow down the mouse cursor, which may look like a mouse freeze.
Here’s how to disable this feature.
Press Windows Key + I to open Settings.
Go to the Pointer Options tab.
Under the Motion section, uncheck the Enhance pointer precision option.
Select Apply to save changes.
If you use mouse control software to customize the controls of your mouse, try resetting the mouse settings to default. Control misconfigurations also can cause the mouse to freeze.
There are varieties of mouse control software available online. For your reference, we will guide you on how to reset the Logitech’s software.
Open the Logitech Options Software.
Go to the Mouse Section.
Close the software and then check if the mouse is working fine.
Most of the time, the fault is with the mouse drivers. If the mouse drivers are outdated or have some underlying issues with it, it can cause a mouse malfunction such as this. To overcome this, users can update the mouse drivers and see if this solves the issue.
Press the Windows key + R, type devmgmt.msc, and hit enter to open the Device Manager.
Navigate to Mice and other pointing devices to expand the list of devices under it.
Select the device and press enter.
Go to the Driver tab and select Update Driver.
Select Search automatically for drivers and follow the prompts to update the mouse drivers.
If updating the driver gives you no resolution, sometimes reinstalling can work as well. If the drivers are corrupted, this method can fix them and make the mouse function normally.
Go to Device Manager.
Use your keyboard to navigate to the Mice and other pointing devices, and press the right-arrow key to expand the list.
Select the mouse driver you want to reinstall and hit enter.
Go to the Driver tab and select Uninstall Device.
Give you a confirmation to uninstall the device driver.
Restart the computer. When the computer boots up, it will automatically install the generic mouse driver.
Finally, check if the mouse is working as intended.
If you see any conflicting drivers that might be affecting the mouse’s performance, you can uninstall those too, using this method. For the mouse that uses third-party OEM drivers, you can download them from the manufacturer’s respective website and install them manually.
There is a possibility of system file corruption or similar issues that migh be contributing to this mouse issue. The SFC and DISM scans diagnose and recover such files to bring stability to the system.
Press Windows Key + X.
Select Terminal (Admin) to launch the command prompt with elevated privileges.
Viruses and Malware can cause serious problems for your system. They are well-known for causing system malfunctions (including mouse freezes) and even stealing your data. To get rid of these and even prevent future infections, install antivirus software and perform manual scans on a regular basis.
For your reference, here is how you can run such scans on Windows defender.
Press Windows Key + R, type windowsdefender://threat/, and hit enter.
Navigate using your Keyboard and go to Scan options.
Mouse freezes are obvious if you have set the Pointer speed to low. Technically, the mouse does not freeze in this case, but it does slow down the overall acceleration of the mouse cursor, making it appear stuck.
In this case, you can easily change the pointer speed on windows using these steps.
Press Windows Key + I to open up Settings.
Many users have reported experiencing this problem after the Windows updates. Users can resolve this by uninstalling the most recent updates and reverting to the previous working state.
Press Windows + I to open the Windows Settings.
How to Fix Limited WiFi on Windows 10/11
Wi-Fi connectivity is essential on any Windows machine. In this article we tackle some of the issues that can result in limited connectivity and how to tackle them in a fast and effective manner.
Although you might think that limited connectivity is related to signal strength, it has more to do with the connection between your Windows computer and the network.
if you want to learn more about Wi-Fi and educate yourself more on the topic, then you can browse more Wi-Fi topics here.
INSTALL BY CLICKING THE DOWNLOAD FILE
To fix various Windows 10 errors, we recommend Fortect:
This software will repair common computer errors, protect you from file loss, malware damage, hardware failure and optimize your PC for maximum performance. Fix PC issues and remove virus damage now in 3 easy steps:
Download and Install Fortect on your PC
Launch the tool and Start scanning to find broken files that are causing the problems
Fortect has been downloaded by
readers this month.
INSTALL BY CLICKING THE DOWNLOAD FILE
Try Outbyte Driver Updater to resolve driver issues entirely:
This software will simplify the process by both searching and updating your drivers to prevent various malfunctions and enhance your PC stability. Check all your drivers now in 3 easy steps:
Download Outbyte Driver Updater.
Launch it on your PC to find all the problematic drivers.
OutByte Driver Updater has been downloaded by
readers this month.
The limited connection issue often occurs even when the WiFi signal is good (4 or five bars or signal displayed and still no connection available) so, you will be tempted in reconnecting your Windows 8 device to your WiFi adapter, or even in uninstalling the network adapter. Well, these operations might or might not solve your problem, so if you really want to address the WiFi issues, then you should take a look over the guidelines from below.
Read Also: Fix: ‘Bluetooth Won’t Turn on’ in Windows 8, Windows 8.1
Fixing limited WiFi in Windows 8 / Windows 8.1 implies various troubleshooting methods, though below I will detail only the best solutions that you can anytime apply on your device – also these procedures can be easily completed even by a newbie.How to Fix Limited WiFi on Windows 10, Windows 8.1/8? Reset TCP/IP Stack
You might experience limited WiFi connection due to some problems with your TCP/IP stack. Well, in order to fix this issue you should use the Windows 8 Netsh utility. By using this default Windows feature you will be able to address the limited WiFi connection by resetting TCP/IP address, so let’s see how to manage these things:
First of all, open a Command Prompt Window with administrator rights on your Windows 8 / Windows 8.1 based device – in order to do so, from your Start Screen press “Wind + x+ a” keyboard keys.
In the cmd window type: “netsh int ip reset C:resetlog.txt”.
Press Enter and close the cmd box.
Restart your computer and that’s it, your WiFi connection should be working properly now.Disable your Network Adapter Sleep Mode
If the above-explained method only temporarily resolves your WiFi issues try to check your Network Adapter settings. In some cases, you might see that the Adapter is conserving energy by using a so-called “sleep mode”. Well, for fixing your problems you should disable this mode, thus follow the next steps in order to achieve the same:
From your Start Screen press dedicated keyboard keys “Wind +W”.
The Settings search panel will be then displayed on your Windows 8 / Windows 8.1 device.
Now, on the search box type “Network and Sharing Center” and press Enter in the end.
Select your WiFi network and go ahead and pick the “Proprieties” option.
Select “Configure” and go to “Power Management” tab.
Uncheck the box dubbed as “Allow the computer to turn off this device to save power”.
Done.Disable Autotuning for TCP/IP stack
Then, on the same window type (press Enter after each command): “netsh int tcp set heuristics disabled”; “netsh int tcp set global autotuninglevel=disabled”; “netsh int tcp set global rss=enabled”.Change the used driver (Broadcom 802.11 users)
For many users with Broadcom 802.11 card, there’s an easier solution that they can use in order to fix WiFi issues on their PC’s – changing the driver. Here’s how to do it:
Open Device Manager
Select ‘browse my computer for driver software’
After ‘Select ‘Let me pick from a list of device drivers on my computer’
Try to connect to WiFi network
Was this page helpful?
Update the detailed information about How To Fix “Insufficient Output Amount” On Pancakeswap on the Bellydancehcm.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!