Trending December 2023 # How To Enable Xmp In Bios # Suggested January 2024 # Top 18 Popular

You are reading the article How To Enable Xmp In Bios updated in December 2023 on the website We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested January 2024 How To Enable Xmp In Bios

XMP is a feature for anyone looking to gain a slight performance edge for free. RAM speeds have a noticeable FPS increase in many games, especially when it comes to eliminating game stuttering and freezing.

Anyone with an INTEL CPU and compatible motherboard can check if the feature is supported for their specific setup. The same applies to any AMD motherboards and the DOCP RAM setting.

How to Check if XMP Is Already Enabled?

There are many ways to check if this function is enabled, you can do so from the BIOS, third-party software, or through the task manager. If you are unsure how to, we have a separate detailed guide on how to check if this function is enabled.

How to Enable XMP in My BIOS?

You can reach the XMP settings only via the BIOS interface that comes with your motherboard. XMP settings come with various profiles, each offering varying boost options and modes. 

The exact steps might slightly vary, depending on the motherboard you have. Here is the most common way to enable XMP through your motherboards BIOS settings:

How to Enable DOCP in BIOS?

The way to enable DOCP for non-Intel CPUs is quite similar on AMD’s motherboards. Again, depending on your specific motherboard manufacturer and BIOS version, the steps could vary slightly or the options might use different names. 

Now comes the moment of truth: If you have done everything correctly up to this point, congratulations; you just gained free performance with no downsides.

How to Check RAM Speed After XMP Is Enabled?

After you have enabled the XMP mode, it’s vital also to double-check if the actual RAM speeds have increased. The best way to do so is to download the popular utility software called CPU-Z.

It gives users a clear overview of all CPU and RAM-related data. Navigate to the SPD tab and look for the SPD Ext box to find the exact version of the XMP, and the RAM speed will be shown under the Max Bandwidth option.

However, to check your current actual RAM speeds in real-time, you can make use of the task manager. Here’re the steps you need to follow:

FAQ Can I Enable XMP on DDR5 Ram?

XMP is entirely on all DDR5 memory kits and compatible motherboards. Most of the DDR5 memory kits are specially designed for best-in-class speeds and thus often come factory set with the XMP 3.0 profile. 

Is Ram Overclocking Safe?

Overclocking of RAM compared to GPU or CPU speeds is much safer and easy to get right. You will know beforehand the maximum potential of your RAM speeds to run in a stable manner, so you won’t need to experiment with different overclocks. 

Better yet, the XMP overclocking technology works automatically in real-time, giving you the best possible RAM speeds. So once the setting is enabled, you don’t need to worry if your RAM is running at the most optimal settings.

How to Know My Maximum RAM Speed?

The only way to check this is to go to your RAM manufactures webpage or refer to the packaging of your RAM. You will find the exact speed (from 1000 – 6000 MHz) and type of Memory (DDR3, DDR4, or DDR5) you have on your current RAM sticks. 

How Will XMP Affect My Gaming FPS?

Having XMP enabled will certainly impact your in-game FPS. The most noticeable difference will be that your games overall min-FPS and average FPS will go up. However, the biggest determinant of your in-game FPS will be your GPU and CPU, followed by your RAM. 

You're reading How To Enable Xmp In Bios

How To Get To Bios On An Msi Motherboard

Your computer’s BIOS displays your current hardware configuration and other related information. You can also change such settings on the BIOS. 

You can only access BIOS on legacy hardware. But all modern MSI motherboards have UEFI (Unified Extensible Firmware Interface) instead of BIOS.

There are two ways to access BIOS/UEFI on an MSI motherboard. Before Windows 8, you could only go to BIOS using the key. But now, you can either use the BIOS key or access BIOS from the Advanced Startup. 

The most convenient method of accessing BIOS on your MSI PC is to press the BIOS key on startup.

If you are using a USB keyboard, the connected USB port may not allow loading BIOS by pressing the BIOS key. Only certain ports allow this shortcut on a PC. So, reconnect the keyboard to other ports and try again in such scenario.

The necessary steps to access BIOS using the BIOS key are as follows:

In some PCs, the BIOS key is F2 instead of Del, but it’s rare.

You can also access the UEFI/BIOS on the MSI motherboard from the Advanced Startup or Windows Recovery Environment. It is the diagnostic environment you can change your startup settings. You can also repair system errors without logging in to a user account from this environment. 

First, you need to access the Windows Recovery Environment (WinRE). There are many ways of doing so, such as:

With Force Shutdowns

Force shutdown your PC thrice in a row. You can perform a force shutdown by pressing the Power key for a few seconds until you hear a sound. The fan should turn off, and all LED lights should go off. Also, don’t forget to power up the computer before doing the subsequent shutdowns.

From Windows Settings

To go to Advanced Startup or WinRE from your Settings,

Using Shift + Restart Shortcut

The CLI command shutdown /r /o /f /t 00 or shutdown /r /o also allows you to restart your PC to WinRE. The flags indicate the following:

You can use this command on the Command Prompt, PowerShell, Run (Win + R). Or you can create a shortcut and use the command as the location.

Using a bootable drive is the best option to access WinRE if you have severe system or boot errors. If your system is fully functional, the previous methods are more convenient. Here are the necessary steps:

After accessing the Windows Recovery Environment, it’s time to go to the UEFI settings. Follow the instructions below to do so:

There are many changes you can make from the BIOS/UEFI settings. The BIOS settings specify how your system controls and manages the hardware components. Some important configurations you can alter are as follows:

Boot device order.

Processor, fan, or RAM speed.

System date, time, and language.

Enable or disable Virtualization.

Secure boot and TPM settings.

If you haphazardly change the BIOS settings, your system may suffer from certain issues. At such times, it’s better to reset your BIOS to the default settings. On the MSI BIOS, press F9 and select Yes to do so.

After changing BIOS setting, press F10 and select Yes to save the changes and restart your PC.

If you can’t go to BIOS settings using one of the methods we have provided, try the other. You should always be able to reach BIOS from the Advanced Startup as long as your OS is fully functional. But if you want to use the key shortcut but can’t, there are a few things you can try.

First, try changing the USB port if you are using a USB keyboard as we mentioned earlier.

You should also disable fast boot on your PC. Fast boot significantly decreases the startup time, so you might miss the time limit to press the BIOS key. You need to turn it off for both OS and MSI BIOS settings. For the former, we have a dedicated article on How to Disable Fast Startup on Windows. Check it out to learn the necessary steps.

And the easiest way to disable the MSI fast boot is to reset your BIOS. You can do so by removing and reinserting the CMOS battery.

How To Enable Cookies On Iphone

Web browsers feed your iPhone with cookies every time you visit different web pages. Cookies streamline your online experience by saving browsing preferences and personal information on your device, so you don’t have to repeat certain tasks. It’s one of the technologies through which websites obtain your information.

Websites save different types of cookies on your device. Jump to the sections below to learn the different types of cookies and how to enable cookies on your iPhone. This post highlights the steps for managing cookies in Safari, Google Chrome, Microsoft Edge, and Mozilla Firefox. 

Table of Contents

First-Party vs. Third-Party Cookies

The cookie management options on many web browsers will depend on the type of cookie you’re dealing with. Cookies are grouped into two major categories based on their source and purpose.

Many websites often display a dialog box prompting you to grant them access to create cookies on your device. First-party cookies are responsible for preferences and customizations like language, passwords, usernames, billing address, etc., on your browser.

If you revisit a website and you didn’t have to re-enter your login credentials or redo some customizations you made on your first visit, that’s because the site saved its (first-party) cookie on your device.

Advertisers often use third-party cookies (also known as Tracking Cookies) to track your online activity across multiple websites. Therefore, do configure your browser to block third-party cookies automatically.

Enable Cookies in Safari on iPhone

Some sites require you to enable cookies on your browser to enjoy the best user experience. You might encounter difficulties accessing content on certain websites if your browser isn’t saving cookies to your iPhone. To enable cookies in Safari, close the browser and follow these steps:

Open the Settings app and select Safari on the list of applications.

Scroll to the “Privacy & Security” and toggle off Block All Cookies.

With this option turned off, you’ve successfully configured Safari to allow websites to save cookies on your iPhone.

Enable Cookies on iPhone for Google Chrome

Unlike Android, Chrome’s cookie management in iOS is quite restrictive. For context, the Android version of Google Chrome boasts of several cookie management options that let you block or allow cookies in regular and incognito mode.

Enable Cookies in Microsoft Edge

By default, Microsoft Edge blocks third-party websites from saving cookies to your device. If you want to enable cookies for all websites in Microsoft Edge on your iPhone, here’s how to go about it:

Open Microsoft Edge and tap the three-dot menu icon on the toolbar.

Select Settings.

Select Privacy and security.

Scroll to the “Security” section and tap Cookies.

Select Block only third-party cookies if you want Edge to save only first-party cookies generated by the website(s) you visit. Otherwise, select Don’t block cookies to instruct Edge to save both first-party and third-party cookies on your iPhone.

Close and reopen Microsoft Edge for the change to take effect.

Enable Cookies in Mozilla Firefox

Launch Firefox, tap the hamburger menu icon at the bottom-right corner, and select Settings.

In the “Privacy” section, select Data Management.

Make sure Cookies is toggled on. If disabled, toggle on the option and restart Firefox.

How to Clear Cookies On iPhone

If your browser saved third-party cookies on your iPhone, or you’re experiencing issues visiting webpages and downloading files, consider clearing all saved cookies. Note that clearing your browser’s cookies will sign you out of most websites. Likewise, you might have to re-customize your preferences and other settings when you revisit some websites.

Clear Cookies in Safari

Note that this deletes cookies saved by Safari and removes browsing history and other site data.

Clear Cookies in Chrome

Although Chrome’s cookie management isn’t flexible on iOS devices, users have the liberty to delete cookies at any time.

Tap the More icon at the bottom-right corner and select Settings.

Select Privacy.

Select Clear Browsing Data.

Check Cookies, Site Data, and tap Clear Browsing Data at the bottom of the page. Tap Clear Browsing Data again to proceed.

Clear Cookies in Microsoft Edge

Open the browser’s Settings menu and select Privacy and security.

Select Clear browsing data.

Check Cookies and site data and tap Clear browsing data. Tap Clear on the confirmation prompt to proceed.

Clear Cookies in Firefox

Open the Firefox settings menu, select Data Management, toggle on Cookies only, tap Clear Private Data, and tap OK on the prompt.

That’s pretty much all there is to know about enabling and clearing cookies on an iPhone. The steps and techniques in this guide apply to iPadOS devices. 

How To Enable Or Disable Projecting To This Pc In Windows 11

This post explains how to enable or disable projecting to this PC in Windows 11. ‘Projecting to this PC’ is a Windows feature that uses wireless technology to project the content of other devices to your PC screen and allows you to control the connected device using your mouse or keyboard. You can use this feature to project the screen of a Windows Phone, Android Phone, or another Windows PC over the same wireless network.

Projecting to this PC uses the Connect app for screen mirroring. This app is no longer available in Windows, but the functionality can still be accessed via Wireless Display, which can be installed as an ‘optional feature’ on Windows 11. In addition to this, it requires hardware support for the Miracast app. We have previously explained how you can use Projecting to this PC on Windows 11. In this post, we are going to show you how to enable this feature if you don’t have it enabled by default, and also how to disable this feature.

How to Enable or Disable Projecting to this PC in Windows 11

We will show you how to enable or disable Projecting to this PC in Windows 11 using the following methods:

Using Windows Settings

Using Registry Editor

Using Group Policy Editor

Let us see these in detail.

1] Using Windows Settings

Scroll down to the ‘Projecting to this PC‘ option under System settings.

In the topmost dropdown, select ‘Available everywhere on secure networks‘ or ‘Available everywhere‘ to enable the setting.

To disable the setting, select ‘Always Off‘ in the same dropdown.

2] Using Registry Editor

Tip: Take a backup of your Windows Registry to restore the system to its normal state in case something goes wrong.

Press the Win + R key combination.

Type regedit in the Run dialogue box and press the Enter key.

Change the Value Data from 0 to 1.

Reboot your PC.

This will enable the ‘Projecting to this PC’ setting. To disable the setting, change the value data of the ‘AllowProjectionToPC’ key to 0.

3] Using Group Policy Editor

The Group Policy Editor is only part of the Pro, Enterprise, and Education editions. If you have Windows Home, you may use this workaround to enable the missing Local Group Policy Editor.

Use the following steps to enable Projecting to this PC using the Group Policy Editor:

Press the Win + R key combination.

Type chúng tôi in the Run dialogue box and press the Enter key.

In the Local Group Policy Editor, navigate to the following path: Computer ConfigurationAdministrative TemplatesWindows ComponentsConnect

This will enable Projecting to this PC on your Windows 11 PC. If the policy setting doesn’t work, restart your PC or force an update to the configured policy by typing the following command in the elevated Command Prompt:

gpupdate /force

To disable the setting, navigate to the same path in the Local Group Policy Editor and choose Enabled.

This winds up how to enable and disable Project to this PC in Windows 11. Hope you find this useful.

How do I change the projector settings in Windows 11? How do I enable Projecting to this PC in Windows 11?

Read Next: Allow or Stop Windows from asking PIN for Projecting to the PC.

How To Enable Or Disable System Print Dialog In Chrome Browser

If the Print Dialog box is not appearing, then in this post we will show you how to print using System Dialog in the Chrome browser on Windows 11/10. For some, this box is an irritant. Understandably, Not only does it pop up whenever you wish to do a simple print job, but it also tempts users to use unwanted printer settings that may not be suitable for subsequent print jobs.

The best way to avoid Chrome’s print dialog box is to connect a single printer to your computer. However, if you have multiple printers connected to your computer, it always shows you the dialog box.

Disable System Print Dialog in Chrome 1] Disable print preview in the shortcut target

To turn off the print dialog box in Chrome, first find the Google Chrome shortcut, most likely on your desktop. If you can’t find it, press the Windows key and search for Chrome.


2] How to bypass Chrome’s Print dialog box

Another command-line switch to use for disabling Chrome’s print dialog is -kiosk-printing. With this method, the system skips Windows print preview, as well as that of Chrome. It, therefore, prints quickly.

Add the following command-line switch to the end of the Target field:


After adding this switch to the Target field, whenever you want to print out a webpage off Chrome, the print dialog box shows up briefly and then closes immediately.

Read: How to Enable or Disable Scrollable Tabstrip in Google Chrome.

Enable the System Print Dialog box in Chrome 1] Undo the shortcut Target modifications

The system print dialog box is enabled on Chrome by default. So, you don’t need to do anything to enable it, other than undoing the actions described in the previous section about disabling the modifications.

Whenever you try to print a webpage off Chrome, either with the CTRL +P hotkey or via the three dots at the top right-hand corner, the print dialog box shows up.

I can show you how to bring up the print settings even if you are not printing anything. The CTRL + SHIFT + P key combination brings up the system print dialog box, from which you can configure your default print settings and print out the page you are viewing.

2] Create a new shortcut

You can keep your modifications to the system print dialog box and still have it enabled whenever you want. Read on as I explain this.

Navigate to your preferred location and press the CTRL + V key combination to paste it there. You can also get the shortcut by searching for Chrome in the Start menu and opening the file location, as described earlier in this guide.

Move your cursor to the end of the text in this field and delete everything after chrome.exe” (don’t delete the quotes (“)).

What happens now is that the system print dialog box is left enabled when you launch the Chrome browser from the new shortcut. However, if you launch the browser from the shortcut with the modified Target, you open an instance of Chrome with the system print dialog box disabled.

3] Enable the System Print Dialog box in Chrome using Registry Editor

Using a Registry tweak to enable system print dialog for the Chrome browser is more effective than creating and using a shortcut. Once the required Registry tweak is applied, the print preview feature of the Chrome browser is disabled completely. Neither the Ctrl+P hotkey nor the Print… option present in Customize and control Google Chrome setting will work to open the print preview feature of Google Chrome. Instead, the system print dialog is opened directly. The changes are applied for incognito mode too.

You can also disable the system print dialog for the Chrome browser and re-enable the print preview feature of Google Chrome anytime you need. But, before trying this Registry tweak, we recommend you to take backup of Windows Registry. Once done, follow these steps:

Open Registry Editor window

Access the Google Registry key

Create a Chrome key

Create DisablePrintPreview DWORD value

Set Value data of DisablePrintPreview to 1

Press the OK button

Restart the Google Chrome browser.

Below is a detailed explanation of these steps.

In the very first step, open the Registry Editor window on your Windows 11/10 computer. Just type regedit in the Search box and use the Enter key or open the Registry Editor window using any other way you want.

After opening the Registry Editor, access a Google name Registry key. Here is the path to access it:


If for some reason, this Google key is not present, then first create a new Registry key, and name it Google. Under the Google key, create a new key, and name it Chrome (as visible in the image added above).

Finally, restart the Chrome browser if you have opened it. Now whenever you will try to take a print of a webpage, the system print dialog will open.

To enable the print preview feature of Google Chrome again, simply follow the above steps, and either delete the Chrome key or the Google key. Restart your Google Chrome browser to successfully apply the changes.

Similar: How to disable the new Mozilla Firefox Print UI

What is Print using System Dialog?

Print using system dialog helps to take print of a webpage using the system print dialog box for browsers like Chrome, Firefox, and Microsoft Edge. Using that box, you can select a printer, set page range, number of copies, page layout, etc., before you print a page.

By default, when you try to take a print of a webpage, the print preview feature of the web browser is opened. But, if you want, you can also use the system print dialog to take print of a webpage in Chrome, Firefox, and Edge browsers. For this:

Open the print preview dialog box of a browser

Access the More settings section

How do I turn off the Print Dialog in Chrome?

If you are using Windows 11/10 computer, then you can turn off the print dialog box or print preview feature of the Chrome browser using any of these two options:

Using the Google Chrome shortcut icon

Using Registry Editor.

While the first option works only when you open the Chrome browser using its shortcut icon, the second option works no matter whether you open Google Chrome from the taskbar, Start menu, or using the shortcut icon.

Both the options with step-by-step instructions are covered in this post above. After using any of these options, when you will use the print command for a webpage in Google Chrome, the system print dialog will open directly and you won’t see the print dialog box of Google Chrome at all.

Read next: How to change the Default Print Settings in Chrome.

How To Enable Offload Unused Apps In Ios To Save Storage Space Automatically

If you frequently run out of storage space on an iPhone or iPad, you will appreciate a new feature in iOS that automatically saves storage for you. Called Offload Unused Apps, the toggle allows the iPhone or iPad to perform housekeeping and delete apps that have gone unused for a while, just as the name implies. Offloading used apps can noticeably help to reduce storage constraints on a device, since most of us have a handful of apps that may not be getting any usage but are taking up storage space on an iOS device anyway.

The ability to use Offload Unused Apps is limited to modern versions of iOS on iPhone and iPad, meaning you will need to have iOS 11 or later to have this feature available to you.

How to Offload Unused Apps on iPhone and iPad

A simple iOS settings adjustment will enable this feature on an iPhone or iPad:

Open the “Settings” app and visit the ‘iTunes & App Store’ section

Scroll down to locate “Offload Unused Apps” and toggle to the ON position

Exit out of Settings as usual

Once the feature is enabled, apps that are going unused will be removed when the devices storage is running low. For example, maybe you have Garageband, Keynote, and Pages on your device but you have never used any of them, then those apps would be removed automatically to make sufficient storage available.

You’ll notice that while the feature will remove the app, it will maintain data and documents related to the applications that are offloaded. This allows for the app to be re-downloaded again in the future and for all existing settings and app data to be preserved, allowing to resume where you left off if you do want to use the app again down the road. In case you were wondering, that means you would need to manually intervene with the app in question if you wanted to clear the Documents & Data for that app from iOS too, which can often be the source of significant storage usage as well.

This basically helps to automate a common recommendation for freeing up storage in iOS, which is to delete apps that are old and unused or just no longer needed. Now you don’t need to spend much time thinking about what apps to delete, since with this feature enabled the apps will be deleted automatically.

If you can’t recall when you want to get an idea of what apps will be deleted when this is enabled, you can open the storage settings on the iPad or iPhone and look for apps that are labeled as “Never Used”.

Users will find the “Offload Unused Apps” feature will also be a frequent recommendation in the iPhone Storage or iPad Storage section of your device under the “Recommendations” list. When it is listed as a recommendation, it will also tell you exactly how much storage will be saved by enabling the feature, and it’s often multiple GB at a minimum.

Keep in mind that any offloaded unused apps can be re-downloaded again at any time, assuming they’re available on the iOS App Store anyway.

Give this feature a try if you’re running low on storage, or if you frequently see those annoying “Storage Almost Full” messages on your iPhone or iPad.


Update the detailed information about How To Enable Xmp In Bios on the website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!