You are reading the article How To Connect Your Galaxy Nexus To Ubuntu And Enable File Transfer updated in November 2023 on the website Bellydancehcm.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested December 2023 How To Connect Your Galaxy Nexus To Ubuntu And Enable File Transfer
Why is this so?Most older Android phones are using the USB block mode to connect to your computer. In this mode, the computer will see your phone’s SD card as a USB device and mounts it as one. The bad thing about this USB block mode is that once your SD card is mounted in the computer, it won’t be functional in the phone. Any app that depends on the SD card will fail to work during the time when your device is connected to the computer.
Ubuntu doesn’t come pre-installed with support for MTP, that’s why you can’t get your computer to see the phone after you have plugged it into the USB port.
gMTP is a simple MP3 and Media player client for MTP-based device. It provides a GUI for you to mount your Galaxy Nexus and transfer files in/out of it. We will need to compile some code in the process. Follow the steps below and you will be fine.
1. Open a terminal. Install libusb-dev
sudo
apt-get install
libusb-dev2. We are going to need a copy of the libmtp file. The version in the Ubuntu repo is outdated, so we need to download the latest version of libmtp here. (For your info, I am using libmtp-1.1.2.tar.gz).
3. Extract the libmtp file to your Home folder. Back to the terminal:
cd
libmtp-1.1.2 ./
configure--prefix
=/
usrmake
sudo
make
install
This will compile and install the libmtp file.
4. Lastly, install gMTP
sudo
apt-get install
gmtpNow, plug in your Galaxy Nexus and open gMTP. Press the Connect button. If successful, you should see the SD card folder of your Galaxy Nexus. You can now transfer files using the Add/Download button.
Note:
1. Even if it is connected in gMTP, your device won’t appear in the File Manager. You can manage your files transfer only in the gMTP GUI.
2. When attempting to download files from your phone, it will return an error saying the file is not found. This is because the default Download path has been to set to “/” (root) and you have no permission to write to the root folder. To change this, simply open the Preferences and change the Download path to “/home/username” or any other path that you desire.
That’s it.
Damien
Damien Oh started writing tech articles since 2007 and has over 10 years of experience in the tech industry. He is proficient in Windows, Linux, Mac, Android and iOS, and worked as a part time WordPress Developer. He is currently the owner and Editor-in-Chief of Make Tech Easier.
Subscribe to our newsletter!
Our latest tutorials delivered straight to your inbox
Sign up for all newsletters.
By signing up, you agree to our Privacy Policy and European users agree to the data transfer policy. We will not share your data and you can unsubscribe at any time.
You're reading How To Connect Your Galaxy Nexus To Ubuntu And Enable File Transfer
How To Allow Guests To Connect To Your Wi
When guests come to your house, you can share your Wi-Fi password without actually telling them the network name and password. This is made possible by converting your Wi-Fi credentials into a QR code that your friends and family can quickly scan to connect to your Wi-Fi. No speaking the password and no typing the password!
The entire process is uncomplicated, and in this tutorial, we guide you through all the necessary steps.
How to generate a Wi-Fi QR code for your guests
Using a browser-based website, you can generate a QR code that will automatically connect your friends and family to your Wi-Fi network when scanned. Simply print this QR code and leave it in a drawer or maybe in the guest bedroom of your house.
This is particularly helpful if, like me, you have many guests visiting your home, and you don’t want to leave your Wi-Fi password on a post-it note for everybody to see. Plus, if it’s a big gathering, say a holiday dinner, manually telling or typing the password for dozens of people trying to get online can get tiresome. Thankfully, sharing your Wi-Fi password is a charm in this age of QR codes.
Follow these steps to share your Wi-Fi password and let people join your Wi-Fi network using a QR code:
Visit QiFi.org in a web browser.
Enter your Wi-Fi network’s name in the SSID (Service Set IDentifier) field.
For Encryption, make sure WPA/WPA2/WPA3 is selected as most routers use this.
In the Key field, type your Wi-Fi password.
You can export this QR code as a PNG image, screenshot it, or print it.
How will my guests connect to my Wi-Fi using the QR code
Guests using iPhone or iPad
From now on, visitors coming to your home with an iPhone or iPad running iOS 11 (released in 2023) or later will simply have to open the built-in Camera app, be in PHOTO mode, and point the camera at the QR code. Next, tap Join “Your Wi-Fi Name” Network and confirm by tapping Join.
For more:
Guests using Android
As for your guests using an Android phone, they will have to download a bar code scanner app from the Play Store. QiFi recommends Barcode Scanner by ZXing, but feel free to use any. However, if your guest’s Android phone runs Android 10 (released in 2023) or later, just like iPhone, they can simply open the built-in Camera app to scan the QR code and join your Wi-Fi network.
Guests using MacBook or Windows PC
The webcam on a MacBook or Windows laptop doesn’t read QR codes. There are apps like QR Journal for Mac and QR Code for Windows 10, and I tried the former on my MacBook, but it didn’t successfully scan the Wi-Fi QR code using the built-in camera. However, there is another way to address this.
FAQs
Is it safe to share your Wi-Fi password with this web app?
Yes. According to the developer, this web app will “render the code in your browser, on your machine, so the Wi-Fi stays as secure as it was before.” The developer also invites people to read the web app’s code, which is available on Github, for extra peace of mind.
Is it safe to share this QR code with my guests?
Let’s put it this way; it’s probably safer to share a QR code with one of your guests than to share the actual password to your Wi-Fi network in plain text.
What if I change my Wi-Fi name or password?
You will have to follow the above steps again and generate a new QR code if you change your network’s SSID (name) or password.
Other ways to effortlessly share your Wi-Fi password with friends and family
Use built-in iOS Wi-Fi sharing
iOS, iPadOS, and macOS have a built-in feature that shares your Wi-Fi password when someone known to you, like a friend or family, is nearby and they try connecting to your Wi-Fi. All you have to do is tap Share Password. You can learn more about this in our dedicated tutorial: How to easily share access to your Wi-Fi network without revealing the password
Use your Android phone’s built-in Wi-Fi sharing
Given the diversity of the Android world, it won’t be true to say all current Android phones, but several Android phones make it a child’s play to share Wi-Fi passwords. My wife uses a four-year-old Android phone, and to share the Wi-Fi password, all you have to do is:
Tap the connected Wi-Fi name where it says Tap to share password. Instantly it will show a QR code that others can scan to join this network. I can even screenshot or print this QR code for later use!
I hope by now you know how to turn your Wi-Fi credentials into a QR code and have guests scan it. So, when you have several visitors this holiday season, make sure you print your Wi-Fi QR code and hang it in the living room.
Check out next:
Fix: Teamviewer File Transfer Doesn’t Start
FIX: TeamViewer file transfer doesn’t start [Easy Guide]
836
Share
X
If the TeamViewer file transfer doesn’t start for you, these solutions will surely help you.
Using reliable and secure remote control software is the best way to avoid issues like this one.
Restarting your remote session and both client and remote PC can help with this problem.
In case the TeamViewer file transfer is stuck, make sure that background applications aren’t interfering with it.
Whenever you have a complicated problem with your PC, the best solution would be to have a specialist come down and see the PC for himself. However, this is not always possible, so alternative methods need to be used.
This is precisely the scenario where a program like TeamViewer can come in handy. This tool is basically a RAT (Remote Access Tool) which you can use to enter another PC via the Internet and gain almost full control over it.
Besides this, TeamViewer can also be used for file transfers. However, some users have reported having issues with the file transfer component:
From this morning the service to transfer files on works. I can’t even close the session. I have tried on 3 different hosts.
This issue isn’t all that common, but it does block a lot of TeamViewer’s functionality. That is why we decided to create this step-by-step guide to show you exactly what needs to be done.
How do I fix the TeamViewer file transfer issue? 1. Start a new TeamViewer sessionIf you are connected to someone else’s PC and the TeamViewer file transfer doesn’t start, try opening another session. Simply terminate the one you are currently on, and start a new one.
2. Restart your PCSomewhat related to the previous step, sometimes a good idea to fix the file transfer error in TeamViewer is to simply reboot your PC.
This is a basic solution, but several users reported that their issue was resolved after both they and the remote PC were restarted, so we encourage you to try this.
3. Check your Internet connectionTeamViewer doesn’t take up a lot of bandwidth, to the point where activating it is almost unnoticeable. However, the same cannot be said when trying to transfer files.
Stop any processes on your PC that may be taking up bandwidth (torrents, streaming, etc), and try again.
Expert tip:
4. Close background processesAdditionally, ask the person you are trying to transfer files to do so as well.
5. Check what exactly you are trying to sendAs a security measure, TeamViewer prevents users from sending or receiving files to and from certain system directories. This is an added measure to prevent unwanted system corruption.
As a workaround, send whatever files need transferring to some other location, such as the Desktop, and then move the files from there.
This is a simple workaround, but it might be for some users if the TeamViewer file transfer doesn’t start.
However, if none of the above steps didn’t solve the issue, using Mikogo is a backup solution. It doesn’t interfere with any other background applications because you can access the tool through a web browser. No need to download anything.
Moreover, TeamViewer is not the only instrument accessible for file transfer; you can browse our list of alternative choices with the best screen-sharing software for Windows 10, and choose the one that fits your needs.
By following these steps, you should overcome any issues you may have with the file transfer function in TeamViewer.
Was this page helpful?
x
Start a conversation
How To Root Nexus 5X
We yesterday shared the Nexus 5X TWRP recovery for you, and as you must have sensed it, we too saw the root coming once TWRP was out. It only took a day for that to happen, thankfully, as we now have root access on Nexus 5X.
In order to root Nexus 5X, you are gonna need a custom kernel, a modified boot image if you feel more like it, plus installing the SuperSU package from recovery.
Our guide below covers the A to Z of this, and even if you are new and rooting an Android device for the first time, you must not find it difficult.
We hope Xposed framework support for Marshmallow 6.0 and Nexus 5X drops soon, but until then, you can use the precious root access for apps like Titanium backup, Tasker, etc.
Let’s see how to root Nexus 5X by LG and Google.
Supported devices
LG Nexus 5X, codename bullhead
Don’t try this one any other device!
Important: Check your device’s codename on free Android app called Droid Info. If you see the codename mentioned above in the app, then use this recovery, otherwise not. BTW, you can check device’s codename on its packaging box too.
Here is what we’re gonna do with the above.
We are going to install the modified boot image first, then TWRP recovery, and will then use the TWRP to flash all new SuperSU 2.50 package to acquire root access.
Warning!
Warranty may be void of your device if you follow the procedures given on this page. You only are responsible for your device. We won’t be liable if any damage occurs to your device and/or its components.
Backup!
Backup important files stored on your device before proceeding with the steps below, so that in case something goes wrong you’ll have backup of all your important files.
Nexus 5X Root Video Tutorial
Here is a video tutorial right below that shows how you can root your Nexus 5X using Chainfire’s root method, and it uses the guide below exactly.
It’s good if you watch the video and proceed with the guide. Especially if you are new to rooting and flashing stuff using fastboot commands and TWRP.
How to Root Nexus 5X
Required: Make sure you have unlocked bootloader of Nexus 5X. This will delete data, and until you have done this, you cannot root your device.
Step 1. Download the three files required for Nexus 5X root using this method.
Which means, just to be clear, download the modified boot image file(in .zip format), then TWRP file, and then the SuperSU file.
Step 2. Create a new folder called nexus5xroot, and transfer the three downloaded files into that folder.
Step 3. In nexus5xroot folder, extract the zip file to get chúng tôi file from it. Rename the TWRP recovery file to chúng tôi — this makes it easy to enter commands when installing the boot and TWRP recovery below in this guide.
So, you now have chúng tôi and chúng tôi in the folder called nexus5xroot, right? Cool.
Step 4. Install ADB and Fastboot drivers on your Windows PC.
Step 5. Connect the device to PC, and transfer the SuperSU file to your Nexus 5X. Remember the location of the file. Then disconnect the device from PC.
Step 6. Boot your device into bootloader mode. For this,
Power off the device. Then wait for 4-5 seconds after screen goes off.
Press and hold Volume down + Power button together to enter bootloader mode. You will see FASTBOOT written at top.
This screen should be displaying the bootloader status as Unlocked, at the bottom of the screen. If it says Locked, then you need to unlock bootloader fo your Nexus 5X first, and for that see the link right above step 1 above.
Step 7. Now, open command window in the nexus5xroot folder, in which you have the modified boot and TWRP files. For this:
Now choose Open command window here option from that.
You will see a command window open up, with location directed to nexus5xroot folder.
Step 8. Test whether fastboot is working alright. Connect the device to PC first, and then in the command window, run the following command.
fastboot devices→ Upon this, you should get a serial no. with fastboot written after it. If you don’t get fastboot written on cmd window, then it means you need to reinstall adb and fastboot drivers, or change restart PC, or use original USB cable.
Step 9. Flash modified boot image now. Use the following command for that.
fastboot flash boot boot.img(You have to use the boot image’s filename in the above command, which in our case is chúng tôi from step 2.)
Step 10. Boot into TWRP recovery now to be able to flash SuperSU on next steps. Use the following command for that.
fastboot boot twrp.img→ Once you are in TWRP, allow it to mount system as read/write.
We are using the boot command above, which doesn’t installs TWRP recovery actually, but allows us to boot into it using the TWRP image on PC. This way stock recovery is retained upon root, which is required for installing OTA updates.
If you want install TWRP permanently, then use the following command
fastboot flash recovery twrp.img(You have to use the recovery image’s filename in the above command, which in our case is chúng tôi from step 2.)
Step 11. When done, simply reboot to Recovery mode now. (SKIP this step if you used the boot command above, as you are already in TWRP.)
For this, disconnect the device. Now, use Volume up/down button to bring up RECOVERY menu, and then use Power button to select it.
You will boot into recovery mode now, and will see TWRP recovery.
→ Once you are in TWRP, allow it to mount system as read/write.
Step 12. Now’s the time to root your Nexus 5X. Install SuperSU now.
In TWRP, tap on Install, and then select the SuperSU file. Next, do the swipe action at bottom of the screen to flash the SuperSU file.
Tip: BTW, if you can’t install SuperSU as said above, then first wipe data of your device using Wipe menu of TWRP. (Tap Wipe button and then do the swipe action as bottom.) And then reboot the Nexus 5X.
Now, try installing SuperSU using Install menu again.
Step 13. When done, tap on Reboot System button to restart the device.
That’s it. Your Nexus 5X is now rooted wit Chainfire’s root trick.
Need help?
Via
How To Enable And Access Skyrim Crash Logs
The Elder Scrolls 5: Skyrim is a great game. It hit the shelves in 2011, and it’s still going strong since. Part of this success is the game’s inherent support for mods and player-created content. But with player-created content, always comes a level of instability.
Skyrim itself is already a game prone to crashes. Bethesda isn’t known for its engineering capabilities, and it shows. Glitches and crashes are frequent when playing Skyrim. Most of the time, the issue fixes itself, and you revert to your old save.
But what about when your game refuses to open or crashes at a specific location all the time? This scenario is where crash logs can help.
Crash logs are files generated by a program when it encounters a problem and shuts itself off. These files contain vital data about what happened in the moments of the crash. It is the software equivalent of a black box on an airplane.
Looking at this data is a crucial step in troubleshooting software issues. Crash logs are used by almost all programs these days to help figure out bugs and coding errors.
If your Skyrim installation keeps crashing constantly, understanding crash logs is essential. Especially if you have a heavily modded game, crashes can be frequent and common on modded configurations.
These crashes can be game-breaking, and you might not know which mod, in particular, is causing the issue. Looking at the log files will help figure out what is going on.
Skyrim uses something called the Papyrus engine to describe and record log data. Papyrus Crash Logging is not enabled in Skyrim by default. These are the steps to enable it.
Skyrim stores all of its game configuration on a “.ini” file in your user folder. Unless you are using special software like Mod Organizer 2, you can find your chúng tôi file in:
And if you have the special edition:
Once you find your chúng tôi file, you need to make some edits to it. I heavily recommend installing Notepad++ for this. The program is handy in the navigation of any .ini or config files.
Search and look for a [Papyrus] section in the file. If you do not find any, add these lines to the end of the ini.
These are the commands that will activate Papyrus.
If you already have a [Papyrus] section, check to see if these terms are there and the values match. If not, edit it to look like the text above without touching any other settings.
Congratulations! You have now enabled Papyrus Crash Logging for Skyrim. Skyrim should start generating crash logs every time it crashes now. If not, redo the steps given above.
The next part of your troubleshooting should be to take a look at these logs.
Script Folder Location
You can find the generated logs in the same folder you found your chúng tôi file in the above section. Go to the chúng tôi folder and open the new folder called logs. Inside it will be another folder called script. This folder is where Skyrim generates the logs.
It should look something like this:
The Papyrus.0 file will always be the latest crash log. It will not always be the one that should interest you. The file with the same generation time as your game crash is the one you should pay attention to. Configure your explorer to show timestamps if you have difficulty finding the required log file.
Go ahead and open the log with the matching timestamp. Again, I recommend using Notepad++. It will open up the file in a much more manageable way.
Scroll to the bottom. It should show you the last thing the game recorded before it shut off. This place is where you’ll find the culprit behind the crash.
Look for error messages in the last significant timestamp inside the file. The list of possible messages is vast. The best thing to do now is to copy the error message and look it up on a search engine.
Chances are someone else with the same issue has made a post in a forum of a particular mod. There are thousands of mods out there, and everyone’s error messages will vary.
Common examples of error messages are missing .esm/esp files or driver issues. If you see that you are missing something called Dragonborn.esm, chúng tôi or Dawnguard.esm, you might not have the required DLC installed.
The best thing to do then is to reinstall the game and the DLC. Missing DLC is usually the most common error.
If the crash logs do not help you figure out the problem, the next best thing is to optimize your load order.
This is where LOOT comes in. LOOT stands for Load Order Optimization Tool. It can troubleshoot what mods are conflicting with each other or if there are mods with missing masters.
Download and run LOOT. Select Skyrim at the section shown above. You can install it anywhere in your system. Running it will provide you with the list of mods you have installed and show you any problems with the modlist.
Pressing the three lines beside your game title automatically sorts your mods for you. Your game will run better and smoother than before and might stop crashing entirely.
If nothing works, pray to Todd. I’m joking. If you still get crashes, post your log file to an online forum like the Skyrim mods subreddit or the Mod Nexus. The community will be glad to be of help!
How To Connect Power Supply To Motherboard
If you are not a regular PC builder, it might be daunting to see the profusion of tangled wires inside the CPU casing. However, it is much simpler than it appears to assemble and connect the power cables to the motherboard. You just have to find the correct ports and that’s all.
It is obvious that the hardware requires power in order to function. But the power is not directly supplied to them. Most of the essential hardware components are embedded into the motherboard with printed circuits between them. The motherboard acts as the bridge to supply power to several internal hardware in a computer.
Only the CD drive, HDD, and some other hardware receive power directly from the power supply unit. For others, you need to link the power connectors to the motherboard and attach the components to the respective port on the board.
With this comprehensive guide, we are going to learn how to connect the power supply to the motherboard.
When you bring the power supply unit or PSU out of the box, you will see a number of wires with connectors at the end. Each of the connectors is meant to supply power for different hardware. It is quite confusing to find the right one for each of them.
So, let’s start to connect the power supply to the motherboard step-by-step by arranging a screwdriver set and the will to do the work.
The first thing to do is to place the PSU in the CPU casing. Most of the casings have a box-shaped empty space at the top to keep the PSU. If you have modified your system and have bought a custom casing, then you will have to look at its manual to find the space.
You can follow the instructions given below to assemble the PSU to the casing.
Now that you have assembled the PSU successfully, let’s move on to connect the cables.
This cable is one of the biggest connectors and provides the juice to run your entire motherboard and its components.
The reason we are writing the pin as 20 (+4) is that the connector has a bigger portion with 20 pins and a separate one with 4 pins. The reason behind this is to facilitate the older motherboards that had only 20 holes to insert the pins.
Since it is the biggest port on the motherboard, except for the RAM and graphics card slot, you should not miss it.
Let’s see how you can install the connector to your motherboard.
Now, let’s look at the way to connect other power pins to the motherboard.
Another cable that your will find coming out of the power supply is a 4 (+4) pin CPU power connector. This cable supplies power to run your processor.
But it does not matter how big the connector is. The process to connect it is the same. Here is how you do it.
Your processor can work with just a 4-pin connector even if it has a port requiring 8-pins. However, it might malfunction due to insufficient power and I would not recommend doing that.
But for the higher-end board with two 8 pins requirement, you can just insert one and it will do the job. You need to insert the remaining if you want to do extra pieces of stuff such as CPU overclocking.
Now that you have powered your motherboard and CPU, let’s go to know about the other connectors.
Earlier, we did not have heavier programs and we worked out with no or lower capacity video cards. These graphics cards could power themselves up by taking the elixir directly from the motherboard.
However, as our desire increased, the capacity and hence the power required for the video card has risen. The graphics card that we use today may require power directly from the PSU. For that reason, the PSU manufacturers provide us with a cord with 6 pins and removable 2 pins to power up the video card.
Similar to the processor, the power required for the graphics card also varies according to the type. Some require 6 pin while some require 8 pins to run it. Here is the way to connect either of them to the right port.
Furthermore, there can be two different connectors, one for the video card and another for the CPU, having 8 pins on both. To differentiate which one belongs where you just have to look at the structure. The connector for the CPU has split in the middle and others mostly have split making 6 and 2 separate pins.
Let’s see what job the remaining cables have on your computer.
Among the Hardware in your computer that requires direct power from PSU, Hard Disk Drive, SSD, CD/DVD-Drive, etc. are some of them. These hardwares uses the mentioned SATA connector to receive the power.
If you learned how to connect other connectors, then it is also equally simple. Here is the way to do it.
These cables are optional to use except for the HDD or SSD. You generally get atleast 2 SATA connectors. You can leave the remaining ones untouched if you do not have additional hardware needing these.
If you have become perfect at connecting the SATA cable to different hardware, let’s learn about its older brother, the Molex connector.
Remember the older Hard drives that had a number of pins behind it? You must also have immediately thought about the cable to power up the HDD through PSU. That cable is the Molex connector.
Nowadays, the Molex connector does not have much use. However, the manufacturers of PSU like to stay on the safe side providing these cables to the unit. If some users still use the older HDD and motherboard, it is best to have at least one Molex connector in the PSU.
This works similarly to the SATA cables. The SATA cables can be said as the replacement of the Molex connector.
Let’s see how to recognize the Molex connector and the way to connect it.
Find a connector with 4 holes on it with no extra parts.
It is the simplest of all that powers the HDD or CD/DVD drives or sometimes a casing fan.
You will see a slightly curved surface and a complete rectangular surface on the connector.
Find a port on the back of the respective hardware.
Keep the orientation of the connector such that it goes inside the port easily.
It also can be linked only in a single way as other connectors.
There can be an additional small 4-pin connector coming out of the PSU. This pin is similar to a Molex connector but only smaller. This pin is there to supply power to a Floppy Disk Drive.
The process to connect the pin for an FDD is similar to other connectors. Most of the systems, at present, have no FDD in them and this connector is mostly rendered useless now.
You have now learned the way to connect all the power cables to different parts on a motherboard with hardware. If you manage the cables cleanly with zip ties or some process, you can easily assemble all the connections in your computer.
Update the detailed information about How To Connect Your Galaxy Nexus To Ubuntu And Enable File Transfer on the Bellydancehcm.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!