You are reading the article How To Boot Into & Use Recovery Mode On Android updated in December 2023 on the website Bellydancehcm.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested January 2024 How To Boot Into & Use Recovery Mode On Android
If you have an Android device, you may likely want to customize it to a great extent showing your creativity and making the device as truly yours as possible. By default, you have lots of options to customize the device but there’s even more options if you use the recovery mode.
All Android phones ship with a mode called recovery mode that, although built for helping you recover your device when things go wrong, also helps you tweak a number of options on the phone. You can also use the recovery mode if there’s an issue with your system and you think your device could use some help.
Table of Contents
Regardless of how you want to use the mode, here’s how you get into the mode and what you can do with each option available in there.
Reboot Your Device Into Recovery ModeThere are multiple ways to reboot an Android device into recovery mode. Each method uses a unique approach to help you get into the mode and so you should choose the one that you think works for you.
Using Key CombinationsThe easiest method is to use a dedicated key combination. Each Android device has a key combination that, when pressed, allows your device to reboot into recovery mode.
Here are the key combinations for some of the popular Android device manufacturers:
Samsung: Power + Home + Volume Up
Nexus: Power + Volume Up + Volume Down
LG: Power + Volume Down
HTC: Power + Volume Down
Motorola: Power + Home
Sony: Power + Volume Up OR Volume Down
Pixel: Power + Volume Down
Huawei: Power + Volume Down
Xiaomi: Power + Volume Up
OnePlus: Power + Volume Down
Remember that your device must be turned off when you use these key combinations.
Using ADBADB has a number of commands to perform various actions on your Android device and one of these commands lets you reboot into recovery mode.
Provided you have the ADB toolkit set up on your machine, the following is what you need to do to enter recovery mode.
Plug in your device to your computer and launch a Command Prompt or Terminal window in the ADB folder. Type in the following command and press Enter.
You’ll see your device in the list. Next up, type in the following command and press Enter.
Your device will immediately turn off and reboot into the Android recovery mode.
Using An App (Root Required)If you have access to the root on your device, you can use an app from the Google Play Store and get into the recovery mode in a single tap.
Download and install the Quick Reboot app on your device. Open the app, grant the required permissions, and tap on Reboot Recovery.
You’ll quickly reboot into the recovery mode.
How To Use Android’s Recovery Mode OptionsIf you’re using the Android recovery mode for the first time, you may not be aware of the functionality of each option.
Although most options are self-explanatory and you’ll know what they do by their names, it’s good to have more information about each of them. That way you’ll know when to use what option.
Install from internal storage – this allows you to install a zip file from the internal storage of your device. It’s usually used when you have downloaded a recovery flashable file from the Internet and you wish to flash it on your device.
Install from ADB – this option lets you use the ADB toolkit in the recovery mode on your device. You can add, modify, and remove stuff using ADB with this option.
Wipe data and cache – as the name implies, it lets you clear data as well as cache files from your device. It has three sub-options:
Reset system setting – this lets you reset your device to the factory settings.
Wipe cache – it erases all the cache files from your device.
Erase everything – use this if you’d like to delete everything on your device.
Advanced – this has two sub-options in it:
Reboot to fastboot – it reboots the device into fastboot mode. It’s a mode just like recovery mode but allows you to flash custom files using ADB and fastboot.
Reboot to recovery – it reboots your device into the recovery mode.
How Can You Customize Android With Recovery Mode?Just knowing what each option does in recovery mode won’t help much with customizing your device. You’re going to need to learn about various files that your Android device uses for customization.
Here are some of the file types you can flash using the recovery mode to tweak your device:
Custom ROMsA custom ROM is a customized version of the Android operating system for your device. It may or may not have all the stock apps, may have some extra features, and so on.
Flashing it replaces the stock Android you are running on your device.
Custom RecoveryWhat you accessed above was the stock Android recovery and you also have the option to replace it with a custom recovery that brings more features with it.
Two of the most popular custom recoveries are ClockworkMod Recovery and TWRP Recovery.
Custom KernelsA custom kernel is usually flashed on an Android device when you want to overclock your device’s CPU. Only do it if you know what you’re doing or you’ll end-up bricking your device.
Stock ROMsA stock ROM is the stock version of the Android OS for your device. It’s the one that your device came preloaded with. You should use this if your device goes haywire and you have no other way to fix it.
ConclusionThe recovery mode is a powerful hidden feature that lets you unleash the true power of your Android device.
Once you’ve got used to it, you’ll find yourself bricking and unbricking the device again and again, and eventually having a completely custom Android experience that no one else has.
You're reading How To Boot Into & Use Recovery Mode On Android
How To Boot Into Xolo Q2500Tboot / Bootloader Mode
What is Fastboot?
Fastboot allows you to re-flash partitions on your Android device. It works through PC command line and connects over a USB connection with your device. Not every Android device manufacturer allows Fastboot access to end-users, but thankfully Xolo does. With Fastboot, you can flash/modify system or recovery images or completely wipe device’s data easily using the command line on your PC.
Also, if you ever come across the term ‘Bootloader mode’ than know that it’s the other name of Fastboot mode. Both these modes are one and the same thing.
There are multiple methods to boot your Xolo Q2500 in Fastboot mode. The most handy (and hardware coded) method is about pressing a particular hardware button while connecting the device to PC . Others are software based, let’s have a look at them below.
1) Boot into Xolo Q2500 Fastboot Mode Using
HARDWARE BUTTONS
This method is a fail-proof method that’ll always work for you, unless you’ve broken one of hardware keys. In such a case you’d be left with only the other two methods discussed on this page.
Power off your device and wait 4-5 seconds after lights go off.
[ad1]
2) Boot into Xolo Q2500 Fastboot Mode Using
ADB
[ad1]
ADB stands for Android Debug Bridge, a tool used to send terminal commands to a Android device via a PC command line. ADB requires a bit of setup, but it gets the job done with much lesser effort than hardware buttons, so pretty useful in cases when you’ve to boot into Fastboot Mode frequently. Also, if (for some reason) your hardware buttons aren’t working than this is a very good alternative to boot into Fastboot Mode.
And make sure you’ve proper drivers installed for your device.
Extract the file (ADB files for Fastboot chúng tôi you downloaded from the link above to a separate folder on your computer
Prepare your phone
Enable developer options: Go to your phone’s Settings » select About phone » Scroll to the bottom and tap on “Build number” seven times to enable developer options
Enable USB Debugging: Open phone’s Settings » select Developer options » Tick the “USB debugging” checkbox (under Debugging section)
└ If the script shows any error than that means either your device is not connected or you don’t have proper driver for your device installed on your PC.
For your information, the ‘Boot into Fastboot Mode.bat‘ script file that we used above to boot your device into Fastboot Mode only uses one line of command:
adb reboot bootloaderIf you already have ADB setup on your computer and you know how to use it, then you may just use the command given above to boot into Fastboot Mode.
3) Boot into Xolo Q2500 Fastboot Mode Using
Quick Boot (Reboot) APP
Yes! There’s an app for rebooting your phone into Fastboot Mode, and it’s the most easier of the methods we discussed above. But it won’t work unless you’ve root access on your Xolo Q2500, and since not everyone roots their device, we’ve put this as the last method here.
ROOT ACCESS REQUIRED
Open the app and grant Root Access
Select ‘Bootloader‘ from the list of options and it’ll boot your device into Fastboot Mode
That’s all.
FEEDBACK US
How To Boot Into Xolo Q2000L Recovery Mode
What is Recovery?
A recovery is a separate bootable partition on your Android device that you can use to install system updates and repair (factory reset) your device. A lot more can be done using a custom recovery, but the stock recovery that comes pre-installed on your Android device is limited to these features only. And FYI, these features are integrated into the Android OS as well — when you chose to factory reset your device from device settings or install an OTA update, your device reboots and boots into the stock recovery to finish the job.
The stock recovery that comes pre-installed on your device doesn’t support touchscreen mechanism. You’ll have to use the Power and Volume buttons available on your device to select and navigate between options in the recovery.
There are multiple methods to boot your Xolo Q2000L in recovery mode. The most handy (and hardware coded) method is about pressing a combination of keys for a few seconds on your Xolo Q2000L . Others are software based, let’s have a look them below:
1) Boot into Xolo Q2000L Recovery Mode Using
HARDWARE BUTTONS
This method is a fail-proof method that’ll always work for you, unless you’ve broken one of hardware keys. In such a case you’d be left with only the other two methods discussed below.
Power off your device and wait 4-5 seconds after lights go off.
└ In recovery, use Volume Up and Down keys to navigate between options and Power key to select an option.
[ad1]
2) Boot into Xolo Q2000L Recovery Mode Using
ADB
[ad1]
ADB stands for Android Debug Bridge, a tool used to send terminal commands to a Android device via a PC command line. ADB requires a bit of setup, but it gets the job done with much lesser effort than hardware buttons, so pretty useful in cases when you’ve to boot in recovery mode frequently. Also, if (for some reason) your hardware buttons aren’t working than this is a very good alternative to boot into recovery mode.
And make sure you’ve proper drivers installed for your device. You can download driver from this page →
Extract the file (ADB chúng tôi you downloaded from the link above to a separate folder on your computer
Prepare your phone
Enable developer options: Go to your phone’s Settings » select About phone » Scroll to the bottom and tap on “Build number” seven times to enable developer options
Enable USB Debugging: Open phone’s Settings » select Developer options » Tick the “USB debugging” checkbox (under Debugging section)
└ If the script shows any error than that means either your device is not connected or you don’t have proper driver for your device installed on your PC. For help with driver, check this page →
FYI, the ‘Boot into Recovery Mode.bat‘ script file that we used above to boot your device into recovery mode just uses one line of command:
adb reboot recoveryIf you already have ADB setup on your computer and you know how to use it, then you may just use the command given above to boot into recovery mode.
3) Boot into Xolo Q2000L Recovery Mode Using
Quick Boot (Reboot) APP
Yes! There’s an app for rebooting your phone into recovery mode, and it’s the most easier of the methods we discussed above. But it won’t work unless you’ve root access on your device, and since not everyone roos their device, we’ve put this as the last method here.
ROOT ACCESS REQUIRED
Open the app and grant Root Access
Select ‘Recovery‘ from the list of options and it’ll boot your device into recovery mode
That’s all.
How To Boot Into Micromax Bolt A069 Recovery Mode
A recovery is a separate bootable partition on your Android device that you can use to install system updates and repair (factory reset) your device. A lot more can be done using a custom recovery, but the stock recovery that comes pre-installed on your Android device is limited to these features only. And FYI, these features are integrated into the Android OS as well — when you chose to factory reset your device from device settings or install an OTA update, your device reboots and boots into the stock recovery to finish the job.
The stock recovery that comes pre-installed on your device doesn’t support touchscreen mechanism. You’ll have to use the Power and Volume buttons available on your device to select and navigate between options in the recovery.
There are multiple methods to boot your Micromax Bolt A069 in recovery mode. The most handy (and hardware coded) method is about pressing a combination of keys for a few seconds on your Micromax Bolt A069. Others are software based, let’s have a look them below:
1) Boot into Micromax Bolt A069 Recovery Mode Using
HARDWARE BUTTONS
This method is a fail-proof method that’ll always work for you, unless you’ve broken one of hardware keys. In such a case you’d be left with only the other two methods discussed below.
Power off your device and wait 4-5 seconds after lights go off.
└ In recovery, use Volume Up and Down keys to navigate between options and Power key to select an option.
[ad1]
2) Boot into Micromax Bolt A069 Recovery Mode Using
ADB
[ad1]
ADB stands for Android Debug Bridge, a tool used to send terminal commands to a Android device via a PC command line. ADB requires a bit of setup, but it gets the job done with much lesser effort than hardware buttons, so pretty useful in cases when you’ve to boot in recovery mode frequently. Also, if (for some reason) your hardware buttons aren’t working than this is a very good alternative to boot into recovery mode.
And make sure you’ve proper drivers installed for your device. You can download driver from this page →
Extract the file (ADB chúng tôi you downloaded from the link above to a separate folder on your computer
Prepare your phone
Enable developer options: Go to your phone’s Settings » select About phone » Scroll to the bottom and tap on “Build number” seven times to enable developer options
Enable USB Debugging: Open phone’s Settings » select Developer options » Tick the “USB debugging” checkbox (under Debugging section)
└ If the script shows any error than that means either your device is not connected or you don’t have proper driver for your device installed on your PC. For help with driver, check this page →
FYI, the ‘Boot into Recovery Mode.bat‘ script file that we used above to boot your device into recovery mode just uses one line of command:
adb reboot recoveryIf you already have ADB setup on your computer and you know how to use it, then you may just use the command given above to boot into recovery mode.
3) Boot into Micromax Bolt A069 Recovery Mode Using
Quick Boot (Reboot) APP
Yes! There’s an app for rebooting your phone into recovery mode, and it’s the most easier of the methods we discussed above. But it won’t work unless you’ve root access on your device, and since not everyone roos their device, we’ve put this as the last method here.
ROOT ACCESS REQUIRED
Open the app and grant Root Access
Select ‘Recovery‘ from the list of options and it’ll boot your device into recovery mode
That’s all.
How To Boot Into Xolo X1000 Fastboot / Bootloader Mode
What is Fastboot?
Fastboot allows you to re-flash partitions on your Android device. It works through PC command line and connects over a USB connection with your device. Not every Android device manufacturer allows Fastboot access to end-users, but thankfully Xolo does. With Fastboot, you can flash/modify system or recovery images or completely wipe device’s data easily using the command line on your PC.
Also, if you ever come across the term ‘Bootloader mode’ than know that it’s the other name of Fastboot mode. Both these modes are one and the same thing.
There are multiple methods to boot your Xolo X1000 in Fastboot mode. The most handy (and hardware coded) method is about pressing a particular hardware button while connecting the device to PC . Others are software based, let’s have a look at them below.
1) Boot into Xolo X1000 Fastboot Mode Using
HARDWARE BUTTONS
This method is a fail-proof method that’ll always work for you, unless you’ve broken one of hardware keys. In such a case you’d be left with only the other two methods discussed on this page.
Power off your device and wait 4-5 seconds after lights go off.
[ad1]
2) Boot into Xolo X1000 Fastboot Mode Using
ADB
[ad1]
ADB stands for Android Debug Bridge, a tool used to send terminal commands to a Android device via a PC command line. ADB requires a bit of setup, but it gets the job done with much lesser effort than hardware buttons, so pretty useful in cases when you’ve to boot into Fastboot Mode frequently. Also, if (for some reason) your hardware buttons aren’t working than this is a very good alternative to boot into Fastboot Mode.
And make sure you’ve proper drivers installed for your device.
Extract the file (ADB files for Fastboot chúng tôi you downloaded from the link above to a separate folder on your computer
Prepare your phone
Enable developer options: Go to your phone’s Settings » select About phone » Scroll to the bottom and tap on “Build number” seven times to enable developer options
Enable USB Debugging: Open phone’s Settings » select Developer options » Tick the “USB debugging” checkbox (under Debugging section)
└ If the script shows any error than that means either your device is not connected or you don’t have proper driver for your device installed on your PC.
For your information, the ‘Boot into Fastboot Mode.bat‘ script file that we used above to boot your device into Fastboot Mode only uses one line of command:
adb reboot bootloaderIf you already have ADB setup on your computer and you know how to use it, then you may just use the command given above to boot into Fastboot Mode.
3) Boot into Xolo X1000 Fastboot Mode Using
Quick Boot (Reboot) APP
Yes! There’s an app for rebooting your phone into Fastboot Mode, and it’s the most easier of the methods we discussed above. But it won’t work unless you’ve root access on your Xolo X1000, and since not everyone roots their device, we’ve put this as the last method here.
ROOT ACCESS REQUIRED
Open the app and grant Root Access
Select ‘Bootloader‘ from the list of options and it’ll boot your device into Fastboot Mode
That’s all.
FEEDBACK US
How To Boot Into Sony Xperia S Recovery Mode
A recovery is a separate bootable partition on your Android device that you can use to install system updates and repair (factory reset) your device. A lot more can be done using a custom recovery, but the stock recovery that comes pre-installed on Android devices is limited to these features only. And FYI, these features are integrated into the Android OS as well — when you choose to factory reset your device from device settings or install an OTA update, your device reboots and boots into the stock recovery to finish the job.
The recovery installed on your device may not be touch-friendly. You’ll have to use the Power and Volume buttons available on your device to select and navigate between options in the recovery.
There are multiple methods to boot your Xperia S in recovery mode. The most handy (and hardware coded) method is about pressing a particular hardware button a couple of times while booting up your Xperia S. Others are software based, let’s have a look at them below.
NOTE
Sony Xperia devices don’t ship with a pre-installed recovery. So unless you’ve installed a custom recovery like CWM or TWRP on your device, you won’t be able to boot into recovery mode.
1) Boot into Xperia S Recovery Mode Using
HARDWARE BUTTONS
This method is a fail-proof method that’ll always work for you, unless you’ve broken one of hardware keys. In such a case you’d be left with only the other two methods discussed on this page.
Switch off your Xperia S first
Switch it back on and the time when you see your phone’s LED notification light turn Pink! (or changes to any other color) — start pressing either the Volume UP or Volume Down button a couple of times to make your phone boot into recovery mode
Once you’re in recovery mode. Use Volume buttons to navigate Up and Down between options and Power button to select an option in recovery.
[ad1]
2) Boot into Xperia S Recovery Mode Using
ADB
[ad1]
ADB stands for Android Debug Bridge, a tool used to send terminal commands to a Android device via a PC command line. ADB requires a bit of setup, but it gets the job done with much lesser effort than hardware buttons, so pretty useful in cases when you’ve to boot into recovery mode frequently. Also, if (for some reason) your hardware buttons aren’t working than this is a very good alternative to boot into recovery mode.
And make sure you’ve proper drivers installed for your device.
Extract the file (ADB chúng tôi you downloaded from the link above to a separate folder on your computer
Prepare your phone
Enable developer options: Go to your phone’s Settings » select About phone » Scroll to the bottom and tap on “Build number” seven times to enable developer options
Enable USB Debugging: Open phone’s Settings » select Developer options » Tick the “USB debugging” checkbox (under Debugging section)
└ If the script shows any error than that means either your device is not connected or you don’t have proper driver for your device installed on your PC.
FYI, the ‘Boot into Recovery Mode.bat‘ script file that we used above to boot your device into recovery mode only uses one line of command:
adb reboot recoveryIf you already have ADB setup on your computer and you know how to use it, then you may just use the command given above to boot into recovery mode.
3) Boot into Xperia S Recovery Mode Using
Quick Boot (Reboot) APP
Yes! There’s an app for rebooting your phone into recovery mode, and it’s the most easier of the methods we discussed above. But it won’t work unless you’ve root access on your device, and since not everyone roos their device, we’ve put this as the last method here.
ROOT ACCESS REQUIRED
Open the app and grant Root Access
Select ‘Recovery‘ from the list of options and it’ll boot your device into recovery mode
That’s all.
Update the detailed information about How To Boot Into & Use Recovery Mode On Android on the Bellydancehcm.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!