You are reading the article Fix: Windows Was Unable To Install Your Base System Device updated in December 2023 on the website Bellydancehcm.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested January 2024 Fix: Windows Was Unable To Install Your Base System Device
Fix: Windows was Unable to Install Your Base System Device Outdated or faulty drivers are the chief causes of this issue1
Share
X
The W
indows was unable to install your base system device error message can be down to an outdated driver.
The first thing you need to do to fix this issue is to update and restart your PC.
Another excellent solution is to update your drivers manually or with an automated tool.
X
INSTALL BY CLICKING THE DOWNLOAD FILE
To fix Windows PC system issues, you will need a dedicated tool
Fortect is a tool that does not simply cleans up your PC, but has a repository with several millions of Windows System files stored in their initial version. When your PC encounters a problem, Fortect will fix it for you, by replacing bad files with fresh versions. To fix your current PC issue, here are the steps you need to take:
Download Fortect and install it on your PC.
Start the tool’s scanning process to look for corrupt files that are the source of your problem
Fortect has been downloaded by
0
readers this month.
Often you might be faced with a situation where you encounter Windows was unable to install the base system device message. This mainly occurs after installing or upgrading to Windows 10.
The problem is compounded by the fact that you aren’t sure what the base system device stands for, while the only clue you have is the yellow exclamation mark in Device Manager.
However, the problem is easy to deal with, and we will show you how to fix it in this guide.
What does Windows was unable to install your base system device error mean?Windows was unable to install your base system device error means that your PC could not find the problematic device’s official driver to connect to. A yellow exclamation mark usually denotes this, and the faulty device is listed chiefly under Other devices.
This issue can be down to the two major factors listed below:
Faulty or outdated driver: The primary cause of the base system device doesn’t have a driver issue is a faulty or outdated driver. The quick way out here is to reinstall or update the driver.
Outdated PC: If you have not installed the latest Windows update, you might get the base system device driver error Windows 10 HP system and other products. The solution here is to download and install the latest updates.
How can I fix Windows was unable to install your base system device?Windows updates are essential in keeping your PC running smoothly. They can also help install driver updates.
Hence, if you have not updated your PC in a while, you might get the Windows was unable to install your base system device error. Updating and restarting your PC should fix the issue.
Expert tip:
Alternatively, you can use a dedicated driver updater in Outbyte Driver Updater to update your drivers automatically. This tool scans for outdated, missing, and corrupt drivers and installs the updated version from its database.
With this, you can focus on other things while Outbyte Driver Updater takes care of everything driver on your PC.
A trustworthy tool with which you can update all your drivers in a second with the newest versions.
Free Trial Download now
3. Reinstall the driverIf updating your PC does not eliminate the Windows was unable to install your base system device error message, you need to uninstall and reinstall the faulty driver. Going to your PC manufacturer’s website is the quickest way to do this.
There you have it: Everything you need to fix the Windows was unable to install your base system device error message. You only need to follow the steps carefully, and things should be back to normal.
In the same vein, if you are unable to install drivers on Windows 10, check our detailed guide to solve the problem.
Still experiencing issues?
Was this page helpful?
x
Start a conversation
You're reading Fix: Windows Was Unable To Install Your Base System Device
Gta V Error, Unable To Detect Windows Media Player On Your System
Are you experiencing the “Unable to detect Windows Media Player on your system” error while playing the GTA V game? A lot of GTA V players have experienced the error while launching the game. Some users have even faced this error while installing the game When triggered, here is the full error message that is prompted:
Unable to detect Windows Media Player on your System. Please Install Windows Media Player, then try launching Grand Theft Auto V again.
You might also get this error message while installing the game:
Unable to detect Windows Media Player on your System. Please Install Windows Media Player, then retry the installation
As the error message suggests, it is triggered if Windows Media Player is not installed on your system. However, there can be some other underlying reasons for the error. It is most likely to be caused by earlier versions of Windows including Windows 10.
Now, if you are facing the same error, this guide is for you. In this post, we are going to show you fixes that will help you resolve the error.
What causes the Unable to detect Windows Media Player on your system error on GTA V?Here are the potential causes of the Unable to detect Windows Media Player on your system error on GTA V:
It is highly to be caused because of missing or disabled Windows Media Player on your PC. Hence, try enabling Windows Media Player to fix the error.
It could also be caused due to outdated Windows OS. So, update your Windows and check if the error is resolved.
You might also face this error if you are dealing with corrupted or missing game files. Hence, if the scenario is applicable, try verifying and repairing the game files to fix the error.
The corrupted installation of the game can also cause this error. So, you can try reinstalling the game to fix the error.
Fix GTA V error, Unable to detect Windows Media Player on your systemHere are the fixes you can try to resolve the Unable to detect Windows Media Player on your system error on GTA V:
Reboot your system.
Make sure your Windows OS is updated.
Enable Windows Media Player.
Update Windows Media Player.
Verify the integrity of game files.
Troubleshoot in a clean boot state.
Reinstall GTA V.
Let us discuss the above fixes in detail.
1] Reboot your systemThe first thing you should do to fix this error is to restart your PC. This error might be facilitated due to some temporary glitch in your system or even the game. In that case, a simple restart should fix the problem for you. Hence, try rebooting your PC and then launch the game to check whether or not the error is fixed.
If restarting your system doesn’t work, you can try some other troubleshooting methods from this post.
2] Make sure your Windows OS is updatedYou are likely to face this error if you are using an outdated version of Windows. Hence, you need to ensure that your Windows is up-to-date to avoid such errors. To update Windows, you can follow the below simple steps:
Firstly, press Windows + I to open the Settings app.
Now, go to the Windows Update tab and press the Check for updates button. Windows will now detect all the available updates that you can install.
After you are done updating your PC, it will restart. You can then try opening the game and check if the error is now resolved or not.
Read: Fix Grand Theft Auto V Launcher has stopped working.
3] Enable Windows Media PlayerThis error could be caused if Windows Media Player is disabled on your system. Hence, you need to enable it to fix the error at hand. For that, you can follow the below steps:
Firstly, open Control Panel from the taskbar search.
Next, from the left-side pane, tap on the Turn Windows features on or off option.
In the Windows Features dialog window, scroll down to the Media Features category.
After that, make sure that the checkbox associated with the Windows Media Player option is enabled.
Finally, press the OK button and try opening the GTA V game to see if the error is fixed or not.
If the error still persists, try the next potential fix to resolve the problem.
RELATED: Fix GTA V Error Code 1000.50 on Steam.
4] Update Windows Media PlayerOutdated applications are known to cause errors on PC. If you are using an outdated version of Windows Media Player, it is recommended to update the app and then try running the game. To update Windows Media Player, you can follow the below steps:
Firstly, open Microsoft Store from the taskbar search option.
Now, go to the Library section from the left-side panel.
Next, press the Get updates button to let it scan and download the available updates for installed apps.
Once done, reboot your PC and check if the error is resolved or not.
If you still get the same error, try the next fix to resolve it.
Read: Fix Error Code 134 in GTA V on Windows PC.
5] Verify the integrity of game filesIn many cases, various game launch errors like the error at hand are triggered because of corrupted or broken game files. So, this error could very well be facilitated if there are corrupted, broken, or missing game files of GTA V. Hence, if the scenario is applicable, all you have to do to fix the error is to verify the integrity of the game files and repair the bad ones.
If you are using Rockstar Games Launcher, you can follow the below steps to verify and repair the game files of GTA V:
Now, navigate to the My installed games section which is available in the left-hand side pane, and choose the GTA V game.
Next, tap on the Verify Integrity button available under the Verify game file integrity option. The launcher will now verify and repair your game files.
Once the verification process is finished, you will get a popup message.
Finally, you can reopen the GTA V game and check if it runs properly without the error at hand.
In case you play the GTA V game on Steam, you can try the below steps to verify the integrity of the game files:
Firstly, open the Steam client and move to LIBRARY.
After that, tap on the Properties option from the appeared context menu.
Once the game files’ verification is done, relaunch the GTA V game and check if the error is resolved now.
If the problem still persists, you can try the next potential fix to get rid of the error.
Read: Fix GTA 5 online not working on Windows PC.
6] Troubleshoot in a clean boot stateIf none of the above solutions helped you fix the error, you can try performing a clean boot. There might be some third-party app conflicts that are causing the error at hand. Hence, restarting your PC in a clean boot state should help you fix the error. Here is how to do that:
First, evoke the Run dialog using Win+R and then type msconfig in its Open field.
Then, press the Enter button to open up the System Configuration window.
Now, move to the Services tab and check the Hide all Microsoft services option.
After that, move to the Startup tab, press the Open Task Manager option, and then disable all the startup programs in opened Task Manager.
Finally, restart your Windows PC and check if the error at hand is resolved or not.
7] Reinstall GTA VThe last resort to fix the error is to reinstall the GTA V game. In a few instances, this error could also be caused due to some corrupted installation files of the game. Hence, you can try uninstalling the game and then reinstall it to fix the error.
How do I fix the GTA 5 launcher error?If you are unable to launch GTA 5 on your PC, you can try running the game as an administrator. If that doesn’t work, verify the integrity of GTA 5 game files, update your graphics driver, reinstall Visual C++, delete the cache files, disable your antivirus, or disable your NVIDIA device. Other than that, you can also try reinstalling the Rockstar Games Launcher and Social Club applications to fix the problem.
Hope this helps!
How do I fix Media Player error?The fixes to resolve a Windows Media Player error depend upon the error you are receiving. For example, if you are experiencing the Server Execution Failed error in Windows Media Player, you can try running Video Playback Troubleshooter or disable the WMP Network Sharing service.
Now read:
Fix Error 3002 On Your Magicjack Device
Fix error 3002 on your MagicJack device
799
Share
X
The MagicJack error 3002 that you are seeing is a sign that you need to check the Internet connection and make certain adjustments.
In that regard, you can simply try to restart your router by using the procedure described below.
The error 3002 on your MagicJack may also be related to certain security permissions, so check out some firewall settings.
If you’re still looking for a solution to this MagicJack error 3002, remember that you need to do your best to prevent unstable network connections.
As a voice over Internet Protocol (VoIP), MagicJack provides the same services as a phone does, only that instead of an actual phone line it uses an Internet connection.
Many users have recently complained about getting the 3002 error on their MagicJack device. This error usually appears when trying to plug the device into a modem trying to use it on Windows 10.
Fortunately, there’s a way to fix this error, and today we will explore in this article how you can do it in just a few easy steps.
How to fix error 3002 on MagicJack? 1. Restart your routerIn order to see if you are dealing with a IP/TCP inconsistency, the first thing to do is to restart your router and recreate the connection.
Many users reported that this is a common issues, especially at the first try of attempting to configure the device.
In case the 3002 error code is the result of an issue regarding network inconsistency, then this action will flush the DNS IP and also clear the temp data which may have something to do with the error.
To perform this action, locate the Power button, turn it off and wait for 30 seconds before powering it back on. Next, restart both the router and your device and check if the error is still there.
2. Disable the firewall
Press Windows key + R keyboard shortcut to open up a Run dialog box.
Next, type chúng tôi inside the text box and press Enter.
In the Programs and Features menu, locate the security program and choose Uninstall.
Follow the given indications to complete the process.
Finally, restart your device and reconnect your MagicJack device.
To get more answers, check out this quick guide dedicated to users who want to know for sure if Windows Firewall is blocking a port or a program.
This could be the case too, so don’t hesitate to follow the above procedure and disable the firewall if it’s indeed the culprit.
Isn’t the Windows key working? Then, count on us to solve the issue in no time!
3. Check your Internet connectionLow Internet connection speeds or unstable network connections can easily cause the 3002 error. In order to avoid this from happening, we recommend a minimum upload speed of 3 Mbps.
In case you don’t have this kind of Internet connection speed, then adjusting it is essential. After doing this, make sure to check once again if the MagicJack error 3002 is still there.
If you have completed all the above steps and you still experience the issue, then another solution we recommend is to contact the MagicJack customer care service.
On their support page you will need to select the category, where the issue you are experiencing fits and further you will have the option for Live support from their side.
Not being able to use MagicJack can be a problem, but we hope that you found this guide helpful and that you managed to fix this issue.
Was this page helpful?
x
Start a conversation
How To Fix Windows Stuck On System Restore
System Restore is a Windows utility to restore your settings and system files. Most users use it to troubleshoot system issues and create registry backups. So, as long as you have appropriate restore points, you can install third-party apps or make other changes to your system free of worry.
If System Restore is not progressing even after four hours, the process is likely stuck. It usually happens on initialization or while restoring registries.
Fortunately, you can often fix this issue with startup repair or running System Restore on safe mode.
Here are the reasons for System Restore getting stuck on your PC:
Temporary issues with your disk.
Bad disk sectors.
Corrupt boot and system files.
Conflicts with your services or software.
Problematic restore point.
If your PC is stuck on System Restore for a prolonged period, the first thing you should do is refresh the process. A refresh fixes the minor issues with the process and you can do so by power cycling your PC.
Whether you are initiating the System Restore from Advanced Startup or inside your account, you need to force shutdown your PC to get out of the System Restore.
Then, power cycle your PC using the steps below:
Disconnect your power cord, laptop battery, and all peripherals.
Press and hold the power button for 20 seconds to drain any capacitor charge.
Reconnect the power cord, laptop battery any essential peripherals (like keyboard or mouse, not others).
Then, power up your PC and try performing System Restore again. If it gets stuck again, apply the possible solutions we have provided below:
It is also possible that the restore point you are using to revert your system has become corrupt. In this case, you need to try another restore point if it’s available.
To do so, after starting the System Restore utility,
It is also possible that the disk sector where the System Restore is mapping your snapshot image has gone bad. You can run the Check Disk utility to account for this scenario. It’s better to run this tool from the Advanced Startup options.
You can access the Advanced Startup or Windows Recovery Environment in many ways, such as:
Then, to run Check Disk,
The corruption of your system files is another possible reason for the issue. The System Restore executable file rstrui.exe itself is a system file in the %WinDir%System32 directory. It also depends on other protected files. To scan and repair corrupt system files, you can run the System File Checker (SFC) and Deployment Image Servicing and Management (DISM). Here are the commands you can run on Command Prompt to use these tools:
DISM /Online /Cleanup-Image /RestoreHealth chúng tôi /LimitAccess (Replace E: with your Recovery drive. The source file may also be chúng tôi instead of install.wim)
SFC /ScanNow
If you want to know more about these diagnostic tools or encounter some issues, you can check out our article on How to Repair Corrupted Windows Files.
If you are running System Restore from inside your account, it is possible for the process to get stuck due to interference from incompatible software or services.
If System Restore continues getting stuck, you need to run the process from Advanced Startup to avoid any conflicts. You can also use this method if you can’t log in to your account after a hard reboot.
Then, try restoring your system directly from the Advanced options. To do so,
Executing this method with the Windows Recovery or Installation Drive gives the highest success rate. Since you want to restore your system, your system or boot files likely have some issues. So, using a Recovery Drive, with its own boot and system files, is the more effective solution.
You can also try running this process in safe mode. Here’s how you can do so:
If the Advanced Startup System Restore gets stuck on initialization, it indicates errors on your boot manager. You need to run Startup Repair to resolve this issue. Here’s how you can do so:
If Startup Repair doesn’t resolve the issue, you can rebuild your BCD and rerun Startup Repair.
If the previous solutions were ineffective, your last resort is to reset or reinstall Windows. First, try resetting your PC while keeping your files. Follow the steps below for this purpose:
If resetting doesn’t resolve the issue, make a clean reinstall of Windows using an installation media.
It usually takes about 30-45 minutes to complete a system restore. And it can take up to 1.5-2 hours if your PC is running slow.
However, the process can also temporarily get stuck if there are any issues with your disk. To be safe, we recommend waiting up to 4 hours before trying to troubleshoot this issue.
System Restore reverts your PC to the state of the restore point. To do so, it rolls back any changes you have made and deletes all recently installed apps and drivers. All your personal files except the user application settings remain untouched.
You can also check for affected apps on the System Restore GUI before finalizing the process.
Fix Onedrive Unable To Move Shortcut Error
OneDrive lets you share the folders with other users. The application actually puts shortcuts of the shared folders in the OneDrive root directory of the person it is shared with. It is, however, easy to move the folders between the directories but sometimes you may get a pop-up showing an Unable to move shortcut error message:
Unable to move shortcut – We’re currently unable to move shortcuts and moved the shortcut back to its original location.
The popup usually gets triggered whenever you try to move any file/folder into or within OneDrive. Occasionally, you may get this while opening documents as well.
Why is OneDrive unable to move shortcuts?The possible reasons for getting this error are:
If the folder doesn’t have any shortcuts.
If you are trying to move the shortcut of a folder shared by another person, you may get this error message.
Sometimes OneDrive fails to remove the shortcuts of the folders unshared by other users. This may also show the error message saying- you are unable to move the shortcut.
It’s possible that the issue is with its root directory or there is double syncing on the folder.
There can also be a problem with file or folder permissions. The error can be there because you might no longer have access to the file or folder.
You might experience OneDrive sync issues if you are running an old version of the app.
You might have no storage space left on the cloud as well, and you should try to get more space.
An unreliable connection or a bad update of your OS may also cause the OneDrive not syncing issue leading to this problem.
You can easily fix these issues, but first, restart your PC and check if this resolves this error for you. Restarting the PC often resolves the temporary glitches.
Quick Fix: Re-establish the SyncIf your Microsoft OneDrive is troubling and not syncing, then this would be an easy fix if restarting the PC fails. Exit from your Microsoft OneDrive app on your PC and wait for some time. Then, restart it and check if the problem is resolved, and you can move or sync the shortcuts.
Let’s move on to the fixes now. Go through the list then decide which of the fixes you want to try first.
Restart OneDrive
Move the shortcut to its root folder
Stop syncing the folder and delete the shortcut
Delete the shortcut using OneDrive Web5
Remove shared folder shortcuts
Manually reset OneDrive
Switch off the Office Upload
Unlink OneDrive from your system
Select the folders to be synced
Manage OneDrive Storage
Contact Microsoft Support Team
OneDrive Unable to move shortcut 1] Restart OneDriveClose the OneDrive application, wait for a few minutes, and restart it. If the error is due to some temporary glitch, restarting the application will most probably solve your problem and you will be able to move the shortcuts.
2] Move the shortcut back to the root folderIt is possible that you have recently moved the problematic shortcut from OneDrive’s root directory and that is why you are getting this error. The only fix to this issue is to move the shortcut back to the root folder and then try moving it to your preferred location.
The name of the problematic shortcut is always mentioned in the error message, locate it and move it back to its default location. You can also type in the name in the search box if you cannot find it.
3] Stop syncing the folder and delete the shortcutIf moving back to the original location is not solving your problem, try deleting the shortcut but stop syncing that folder first. To stop syncing of a particular folder-
Now delete the shortcut from the folder and see if that helps.
4] Delete the shortcut using OneDrive WebIf for any reason, you are not able to delete the shortcut from the OneDrive client, you can also delete the problematic shortcut using OneDrive Web. To delete the shortcut from the OneDrive Web,
Go to the official OneDrive website and log in using your Microsoft credentials.
Look for the shortcut and if you cannot find it, you can use the search box.
Make sure you delete it from the Recycle Bin as well. You can find the Recycle Bin in the left pane.
Within a few minutes, the file explorer view of the OneDrive will also remove the shortcut.
Check if this helps in removing the error.
5] Remove shared folder shortcuts from your OneDriveIt is possible that the file or folder you are not able to move is a shared folder that is not available anymore for your account. It would be best to remove it.
Select the file or folder which is causing the problem.
On the top menu, select Remove or Remove a shortcut. or Remove from shared list.
If a folder is now not shared with you, it will be removed from your OneDrive. To get back access to that folder, ask the folder owner or an editor to share it with you again.
These steps will remove the folder from your OneDrive, but it will be accessible from the Shared list. It doesn’t affect the owner or anyone else who is sharing the folder.
6] Manually reset OneDriveIf nothing works after several above attempts, then lastly, try to reset OneDrive manually to resolve this issue. You can do this in the following two ways.
Open the Run prompt (press the Windows and “R” key together) and enter %localappdata%MicrosoftOneDriveonedrive.exe /reset.
Open the command prompt (press the Windows and “X” key and select the option Command Prompt) and enter %localappdata%MicrosoftOneDriveonedrive.exe /reset
It will rerun the setup and re-establish the connection.
7] Switch off the Office UploadIt is noticed that the automatic office upload option can interfere with the current functioning of OneDrive.
Switch to Office Tab
Remove the selection of the option “Use Office to sync Office files that I open” and save it by pressing the “Ok” button.
Restart Onedrive again to fix this sync issue.
8] Unlink OneDrive from your systemIf you are still getting the “Unable to move shortcut” message or OneDrive sync issues after resetting it, then you must unlink it from your PC.
To perform this action visit the Settings option on OneDrive
Select the Accounts tab.
There, choose “Unlink OneDrive” or “Unlink this PC” and save the changes.
Later, restart your PC and select the folders you wish to sync with OneDrive manually
9] Select the folders to be syncedA pop-up window will appear. This time choose fewer folders to sync, and also uncheck the folder with which you have a problem. Save and let OneDrive sync. Repeat the same steps, but this time, make sure to sync the folder with which you have issues. Save and Sync again. Check if the problem is resolved.
10] Manage OneDrive StorageIf you don’t have sufficient space on OneDrive, OneDrive may not sync files properly. This situation calls for cleaning up some files from your account, and the best way is to clean up using the OneDrive web.
The storage information is available at the bottom left of the OneDrive web. If you notice the storage space is almost full, it’s to delete some of the files. I would suggest downloading these files on your PC and reuploading them once the problem is resolved.
Along with that, make sure that your hard disk also has enough space. Locate the drive where your OneDrive is installed. Then go to This PC and check if the storage is running out of space. If that’s the issue, you can remove some of the files from the PC and download them on demand.
11] Check with Microsoft SupportAll the best.
8 Ways To Fix Windows 10 If It Won’t Install On Your Pc
8 Ways to Fix Windows 10 if It Won’t Install on Your PC Go through the solutions below to install Windows 10 successfully
3
Share
X
Windows 10 installation has failed
error can be caused by driver errors.
The problem could also either arise due to an interrupted upgrade process from accidentally restarting your PC, or being out of charge.
To fix this, try performing the installation again, and this time make sure your PC is plugged in and stays on through the process.
X
INSTALL BY CLICKING THE DOWNLOAD FILE
To fix Windows PC system issues, you will need a dedicated tool
Fortect is a tool that does not simply cleans up your PC, but has a repository with several millions of Windows System files stored in their initial version. When your PC encounters a problem, Fortect will fix it for you, by replacing bad files with fresh versions. To fix your current PC issue, here are the steps you need to take:
Download Fortect and install it on your PC.
Start the tool’s scanning process to look for corrupt files that are the source of your problem
Fortect has been downloaded by
0
readers this month.
If you’re having trouble trying to install Windows, you’ll be relieved to know there are working solutions to get you out of the rut. When Windows 10 installation has failed, first you’ll have to determine the cause.
To understand why you cannot perform a Windows 10 install, here is a list of the commonly experienced errors that hinder the installation:
Driver errors such as incompatibility with Windows 10 upgrade
A file needed by Windows Update is missing or is damaged
Interrupted upgrade process due to restarting your PC or you’re signed out
Your PC couldn’t connect to Windows Update servers
Not enough free space in the System Reserved partition
Your PC doesn’t have the required updates installed
Incompatible apps installed block the installation
Your PC doesn’t meet the minimum requirements to install Windows 10
Your PC doesn’t have enough space to install Windows 10
Why won’t windows 10 install?This warning can indicate that your computer is missing certain essential updates that have not been installed.
Before attempting the upgrade, you should first double-check that your computer has all of the necessary updates loaded.
Lack of storage space, third-party VPN or antivirus software, or other incompatible applications are other typical contributing factors.
Why can’t I install Windows 10 on any partition?Users have reported that if the SSD disk on your computer isn’t clean, installation issues with Windows 10 might arise.
Why can’t I install Windows 10 from USB?If this happens, it’s possible that a media driver is missing on your PC. This isn’t the only problem, and many reported that Windows cannot be installed to this disk message.
If this happens, check your hard drive and its settings in BIOS and make sure that everything is in order. Hard drives aren’t the only problem, and few users reported that they can’t install Windows 10 to SSD.
Keep in mind that this issue affects all versions, and many reported that they can’t install Windows 11 due to these problems. However, there are a couple of solutions that can help you with this issue.
Each of these errors has a solution, so you need not worry about upgrading or getting to finally install Windows 10.
How do I fix Windows 10 not installing? 1. Fix Driver errorsSometimes you can’t install Windows 10 because of driver errors such as incompatibility with Windows 10 upgrade.
This solution helps fix the driver errors so you can try the installation again.
How to fix driver errors before performing a Windows 10 install
Ensure your computer has enough space, at least 16 GB, to upgrade a 32-bit operating system, or 20 GB for a 64-bit OS
Run Windows Update to download and install available updates including software, hardware and third-party drivers.
Check for third-party drivers and download any updates available. You can find these on the manufacturer’s website.
Unplug excess hardware such as external storage device and drives, docks, and any other hardware not necessary for basic functioning of your computer.
Check Device Manager for drive errors by doing the following:
Remove third-party security software, and use Windows Defender to protect your computer
Repair hard-drive errors by doing the following:
It is known that Windows 10 has drivers compatibility and this problem is not resolved yet. So, the reason why you can’t install Windows 10 might be your driver.
You need to update all your drivers, but doing it manually could be very annoying, so we recommend you to download a dedicated third-party tool to do it automatically.
Here’s how to do it:
Download and install the Outbyte Driver Updater app.
Launch the software.
Wait for the app to detect all incompatible drivers.
Afterward, it will show you a list of the drivers found to select the ones to Update or Ignore.
Restart your PC to ensure the applied changes.
Outbyte Driver Updater
Use this software and solve all driver-related issues from your PC.
Free trial Download now
Disclaimer: You may need to upgrade the app from the free version to perform specific actions.
2. Keep your PC on and try installing againWhen you can’t install Windows 10, it could also either be due to an interrupted upgrade process from accidentally restarting your PC, or you could also be signed out.
To fix this, try performing the installation again but make sure your PC is plugged in and stays on through the process.
3. Turn off VPN software and increase the size of System Reserved partitionPerforming a Windows 10 installation can also fail when the computer can’t connect to Windows Update servers.
Not having enough free space in the System Reserved partition also causes difficulty installing Windows 10.
If you’re using a VPN connection to connect to a work network, disconnect from the network then turn off the VPN software.
To fix the limited space issue, you can use a third-party software to increase the size of the System Reserved partition.
Try installing Windows 10 again.
4. Check for pending updatesExpert tip:
If you cannot install Windows 10 on your PC, you should check to ensure all your computer’s important updates are installed.
Use this solution when your PC doesn’t have the required updates installed.
Here’s how to check and install Windows Update (manually):
1. Go to Start.
2. In the search field, type Windows Updates.
4. Press on Check for updates.
5. Install the latest Windows Updates.
5. Uninstall incompatible appsThis solution works when incompatible apps installed block the installation.
Check to ensure you’ve uninstalled incompatible apps before trying to install Windows 10 again.
In order to find incompatible apps, check Device Manager by using these steps:
Once you identify any incompatible apps, uninstall them by doing the following:
Check if you’re able to install Windows 10 after uninstalling the incompatible apps.
ALSO READ: How to remove software leftovers
6. Check if your computer meets the minimum requirementsUse this solution when your PC doesn’t meet the minimum requirements to install Windows 10.
Go to this link to get more information about the minimum requirements for installing Windows 10.
7. Free up space on your hard driveThis solution works when your PC doesn’t have enough space to install Windows 10.
Free up some space on the drive then try to install Windows 10 again.
Follow these steps to check the available disk space:
8. Run DISM toolIf you still cannot install the OS, run the DISM tool, or Deployment Image Servicing and Management tool.
The DISM tool helps fix Windows corruption errors when Windows Updates and service packs fail to install due to corruption errors, like if you have a damaged system file.
Here’s how to run the DISM command on your PC to check if it helps you when you can’t install Windows 10:
Once the repair is complete, reboot your computer and try to the installation again.
Still experiencing issues?
Was this page helpful?
x
Update the detailed information about Fix: Windows Was Unable To Install Your Base System Device on the Bellydancehcm.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!