Trending February 2024 # Fix Windows Upgrade Error Code 8007001F – 0X3000D # Suggested March 2024 # Top 8 Popular

You are reading the article Fix Windows Upgrade Error Code 8007001F – 0X3000D updated in February 2024 on the website We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested March 2024 Fix Windows Upgrade Error Code 8007001F – 0X3000D

When upgrading, if the Windows Setup fails with Error Code 8007001F – 0x3000D, then technically, it means that there is a problem with the user profile migration on the computer. The exact cause in technical terms is:

The installation failed in the FIRST_BOOT phase with an error during MIGRATE_DATA operation.

During installation, Windows goes through multiple phases during boot up, and this failure happens in the first boot phase.

Windows Upgrade Error Code 8007001F – 0x3000D

If you know how to analyze log files, you need to determine the files or Registry entries that are blocking data migration. Usually, this error occurs when there is a problem with user profiles. Registry corruption can make Profile user entries invalid.

In short, you need to figure out User Profiles that are either duplicate or should not have been there.  At times when a previous upgrade did not finish, invalid profiles might exist in the Windows.oldUsers directory. You should delete accounts or related entries from the Registry.

These specific files and profiles casing the error will be listed in the Windows Setup Log files. Look for “setuperr.text” file in C:Windows. Open, and look for mention of user profiles. The log messages are in this format:

Date/Time : 2024-09-08 09:23:50

Log level:    Warning MIG

Component Message :  Could not replace object C:UsersnameCookies. Target Object cannot be removed.

Make sure to create a system restore point before deleting files. In case something goes wrong, you have a way to restore it to a working condition.

Delete Invalid Users from Registry

Type regedit in the Run prompt, and hit enter.

Navigate to:

HKLMSOFTWAREMicrosoftWindows NTCurrentVersionProfileList

Find out the list of profiles that are invalid.

Delete it.

Delete Invalid User Folders

Go to the drive where Windows is installed. (Assuming C here)

Navigate to C:Users and find invalid profiles that should not have been here.

Delete it and empty the Recycle Bin as well.

This method should resolve the Error Code 8007001F – 0x3000D. Let us know if this worked for you.

How do I Fix any Windows Upgrade Error?

At times, Windows Upgrade is known to create problems as well. It’s primarily because of the compatibility between devices and updates, or there can be minor issues. That said, if you get an upgrade error before the updates start, you can run the Windows Troubleshooter, clear the files from the software distribution folder, and try updating again. If you are facing issues after the upgrade, the only way out is to check if there are fix released for the issue, or you can always roll back to the previous version in 10 days.

What is the difference between Windows Upgrade and Windows Update?

While they sound similar, they are unique. Windows Upgrade occurs when there is a significant change in the OS, while the update is when Windows Team rolls out fixes to the platform reported by users. Windows 10 has substantial feature updates, but Windows 11 is an Upgrade. Another criterion during the upgrade is a change in hardware requirement. Windows 11 needed TPM 2.0 to upgrade PCs from Windows 10; if you did not have one, the only way out was to buy new hardware.

Related errors:

You're reading Fix Windows Upgrade Error Code 8007001F – 0X3000D

Fix Xbox Error Code 0X80073Cf6

In this post, we will talk about the ways to fix Xbox error code 0x80073cf6. Usually, this error occurs after updating the Xbox app or Windows 11/10 app. However, you may also see this error message in other scenarios. Some users encountered the error 0x80073cf6 while installing a game. If you see this error on your Windows 11/10 computer or Xbox Console, you can try the solutions provided in this article.

Fix Xbox error code 0x80073cf6

The following solutions may help you fix Xbox error code 0x80073cf6.

Check Xbox Live Status

Power Cycle Xbox Console

Run appropriate troubleshooters

Reset Microsoft Store

Clear persistent storage on your Xbox Console

Delete other games that you don’t need

Factory reset your Xbox Console

Let’s see all these fixes in detail.

1] Check Xbox Live Status

The first thing that you should do is to check Xbox Live Status. Sometimes users receive different error messages due to Xbox Server outage issues. If Xbox Live Status shows server outage, you have to wait till Microsoft resolves this issue. Usually, the errors occurring due to the server outage will get fixed automatically after some time.

2] Power Cycle your Xbox Console

If the error is occurring while installing a game on Xbox Console, you should Power Cycle it and see if it resolves the issue. The steps to power cycle Xbox Console are listed below:

Press and hold the Xbox button for about 10 seconds to turn off the Console.

Disconnect the power cable from the wall socket.

Wait for a few minutes.

Connect the power cable again and turn on your Console.

Now, check if the issue is fixed. If not, try the next potential fix.

3] Run appropriate troubleshooters 4] Reset Microsoft Store

This solution has worked for some users. You can also try it and see if you get the error code 0x80073cf6 after resetting Microsoft Store. The following steps will guide you on this:

Open Windows 11/10 Settings.

Scroll down the list of installed apps and locate Microsoft Store.

The above action will delete your app’s data. Therefore, before resetting Microsoft Store, make sure that you have backed up your game data to the cloud.

5] Clear persistent storage on your Xbox Console

If Xbox Console is displaying the error message while installing the game from a disc, clearing the persistent storage on your Xbox Console may help. The “Clear persistent storage” option applies to the Blu-ray discs. After performing this action, you will get rid of leftover junk memory and cache files.

The following steps will help you clear persistent storage on your Xbox Console:

Press the Xbox button to open the guide.

Select Persistent Storage.

Now, select Clear persistent storage.

6] Delete other games that you don’t need

Sometimes, errors occur due to conflicting apps or games. If your library still has the games that you don’t need or play, you can uninstall those games. This will also free up some space on your disc.

7] Factory reset your Xbox Console

If none of the above solutions worked for you, reset your Xbox Console to factory default settings. When you perform this action, Xbox will show you two options, remove everything and keep your data. You can select the desired option. The steps to factory reset the Xbox Console are listed below:

Press the Xbox button to open the guide.

Select Reset console and select any one of the following options:

Reset and remove everything.

Reset and keep my games & apps.

If you select the latter option, your data will not be deleted.

This should help.

Read: Fix Xbox error code 8015DC01.

What does error code 0x80073cf6 mean?

The error code 0x80073cf6 occurs due to the failure of an update or installation process. You may see this error message after updating an app or game from Microsoft Store or installing a game on Xbox or Xbox Console. Apart from that, you may also see this error if Xbox Server is down. In this case, the error will be fixed automatically after some time. We have described some troubleshooting tips in this article that will help you fix the Xbox error code 0x80073cf6.

How do I fix error code 0x80073cf6?

You may see the error code 0x80073cf6 while installing or updating apps from Microsoft Store or installing games on Xbox or Xbox Console. If the error occurs while installing or updating apps from Microsoft Store, you can run Windows Store Apps Troubleshooter, Windows Update Troubleshooter, rename the Software Distribution folder, etc. If this error occurs on Xbox Console, you can try power cycling your Xbox Console or clearing the persistent storage on your Xbox Console. If this does now help, factory reset your Xbox Console.

I hope this helps.

Read next: Xbox Game error 0xa3e903ed on EA Play app.

Fix Mcafee Installation Error Code 0 On Windows Pc

On your Windows 11 or Windows 10 computer, you may get Error Code 0 when you attempt the installation of the McAfee Security Suite. This post offers the most suitable solutions affected PC users can apply to effortlessly resolve the issue and ensure their PC stays protected!

When this error occurs on your system, the installer displays a red banner with either of the following error messages.

Unable to Continue Installation. We are having trouble completing your McAfee software installation because of this error: 0

Something went wrong with the installation. We are having trouble installing your McAfee software. Contact McAfee Support and mention problem code 0.

What is problem code 0?

Usually, error code 0 means there is no response. If McAfee is not installing on your Windows PC, it might be because your PC is infected with a virus. If your computer is infected with a virus or malware, you might be prevented from installing any security software. So, you can run a scan using any of the free Standalone On demand Antivirus Scanners for Windows 11/10 and afterward try the software installation again.

Listed below are a few of the common reasons you may encounter the error code when installing McAfee on your device:

Incomplete application download or installation.

Malware or virus infection is already present in the system.

Corrupted registry files.

Restrictions for the pre-existing antivirus.

Fix McAfee installation Error Code 0

If the evolution of malware and viruses is anything to go by, once your computer or laptop is infected or compromised, the malware/virus can steal your data, encrypt it so you can’t access it, or even erase it. For this reason, you must always use antivirus software and keep it up to date to protect your data and devices. So, if you prefer not to use the inbuilt Microsoft Defender, and when installing the McAfee Security Suite on your Windows 11/10 PC you get the Error Code 0, then the suggested fixes presented below should help you fix the problem on your device.

Run the McAfee Pre-Install Tool

Run the McAfee Removal Tool and redownload the McAfee installation package

Resolve any DNS issues

General troubleshooting for app/program installation issues on PC

Install and use another AV solution

Let’s look at the description of the process as it relates to each of the listed solutions.

1] Run the McAfee Pre-Install Tool

Every other thing being equal, this is the simplest and most common fix to the McAfee installation Error Code 0 that is triggered on your Windows 11/10 device. You can use the McAfee Pre-Install Tool to help prepare your Windows computer to download and install McAfee products and you will have to verify that your computer meets the minimum requirements to use this tool.

Do the following:

Download the Pre-InstallTool directly from McAfee.

Restart your PC once the procedure completes.

On boot, you can try to install your McAfee security software again. If the installation fails again, continue with the next solution.

2] Run the McAfee Removal Tool and redownload the McAfee installation package

You may have downloaded a corrupted McAfee installer package and running the installation deposited corrupted registry files for the software in the Windows registry hence the botched installation and failure to continue or complete. In this case, to resolve the issue, you can download the Antivirus Removal Tool for McAfee and use it to completely uninstall McAfee. Run the tool and reboot when prompted. On boot, download the McAfee Windows Security Suite installation package again and retry the installation using the newly downloaded package.

3] Resolve any DNS issues

Installation issues might occur if name resolution (DNS) is slow. In this case, changing the DNS setting on your network card to a public server might help to resolve these issues. Likewise, if the DNS settings are corrupted, it can prevent certain applications from making contact with the internet which could be the case here for the McAfee software installation failing on your Windows 11/10 computer. In this case, you can flush the DNS.

4] General troubleshooting for app/program installation issues on the PC

Corrupted operating system files or configuration or interference by third-party software can potentially cause problems with some program installations, McAfee Security Suite in this case. The general troubleshooting in the guide Cannot install or uninstall programs includes running the handy Program Install and Uninstall Troubleshooter that will automatically diagnose any problems that you may be facing while installing or uninstalling programs or software on your device. This tool will help you fix problems that block programs from being installed or removed.

5] Install and use another AV solution

If none of the McAfee installation issue-specific solutions or the general troubleshooting for software/program/app installation issues on Windows 11/10 PC as presented above did not work for you in resolving the error you’re currently dealing with, then you can consider installing and using another AV solution on your device — or better still, configure the inbuilt Windows Defender to your requirement. If you are unable to or cannot start Windows Defender, then one of the suggestions provided in this guide is sure to help you!

Hopefully, this post helps you!

Read next: Error 5, Access is Denied while installing software

Is McAfee not compatible with Windows 11/10?

Read: Your Antivirus protection has expired. What next?

Fix Windows 10/11 Error Code 0Xc0000034 With These Solutions

Fix Windows 10/11 error code 0xc0000034 with these solutions






Try Outbyte Driver Updater to resolve driver issues entirely:

This software will simplify the process by both searching and updating your drivers to prevent various malfunctions and enhance your PC stability. Check all your drivers now in 3 easy steps:

Download Outbyte Driver Updater.

Launch it on your PC to find all the problematic drivers.

OutByte Driver Updater has been downloaded by


readers this month.

Most of us often encounter the annoying Blue screens of death problems on our different versions of Windows.

You will see that the screen will simply turn blue or the system will completely fail to boot. 

What causes error 0xc0000034?

1. Bad sectors on Hard drive

All the critical system files will not be readable if you have bad sectors on your hard drive.

2. Corrupted Windows installation

You might have a corrupted installation of Windows as your OS crashed due to a malware or other reasons.

3. Missing boot files

Damaged BCD is a possible cause of the 0xc0000034 error. It occurs because your boot-related files are either corrupt, missing, misconfigured and damaged.

4. Compatibility Issues

Some of the users face the error because the recently changed hardware or software has compatibility issues with their PCs.

If you are a Windows 10 user you will see the following error message on your blue screen:

Press ESC for UEFI Firmware Settings.

How to get rid of  

Windows 10 error code 0xc0000034?

1. Run Windows automatic repair

Expert tip:

Windows provides an Automatic Repair tool that uses the Windows installation media (DVD, CD or USB drive) to fix the issue in a few steps. Here are some simple steps that you need to follow:

Insert the Windows 10 DVD or USB stick and restart your system.

Make sure to boot your system using the Windows installation media instead of your hard drive. You need to constantly press the specified key (F8 or F11 key depending upon your system) and choose the correct boot device.

You will see a list of operating systems, select the one you currently have. A repairing process will start to check your Windows for problems and fix them.

Wait patiently until the end of the process.

If the first solution fails to fix the error, try the next solution. 

2. Manually repair the error

This method requires a Windows 10 setup bootable media, so you can fix the error by following these steps.

First, plug in Windows 10 DVD or USB stick after starting your PC. The system will prompt you to select your keyboard and language settings.

Select the Repair your computer option.

As soon as you see a Command Prompt window, enter the following commands and press Enter key after entering each of them.

bootrec /fixMBR

bootrec /fixBoot


bootrec /rebuildBCD

At this step add the installation to the boot list by typing A and pressing the Enter key.

In the end, you will proceed to the Windows 10 home screen.

As you have finished the entire process the Windows 10 Error Code 0xc0000034 should be fixed and your system should boot normally. If the problem still persists try the next solution.

3. Refresh Your PC

When you are unable to repair your PC using any of the above-mentioned solutions you can use Windows Recovery Environment (WinRE) to perform Automatic repair.

Please follow the following steps to refresh your Windows 10 PC:

At the first step, you have to Reboot your PC.

Next, you need to hit the F8 or F11 key (depending upon your system) to

 open Advanced boot options.

On the next screen select Troubleshoot and then Refresh your PC. 

Follow the instructions to complete the process.

How can I avoid the error in the future?

You have to care about the health of your Windows OS if you want to avoid this error in future. You should avoid downloading any suspicious programs that can be potentially harmful to your system. In case your system gets infected with any malware, scan your PC with antivirus software.

Most importantly, regularly updating your PC is the best solution to keep your system bug-free. Microsoft regularly releases updates including bugs and fixes to protect your PC. Following these simple steps can protect your PC from unnecessary damage and future issues. 


Was this page helpful?


Fix League Of Legends Error Code 900 On Windows Pc

You may get the error code 900 when you attempt to log into or while playing League of Legends game on your Windows 11 or Windows 10 gaming system. If so, the suggested solutions provided in this post are intended to help affected users fix the error.

You’re likely to encounter this issue on your gaming system due to one or more of the following triggers;

Widespread server issue.

LoL game client or launcher inconsistency.

Corrupted Internet Options cache.

Corrupted League of Legends installation.

Antivirus or Firewall interference.

Account related issue.

Fix League of Legends Error Code 900

If the League of Legends Error Code 900 has occurred on your Windows 11/10 gaming PC, you can try our recommended solutions presented below and see if the error is fixed on your gaming system.

Initial checklist

Check Riot Games server status and your Internet connection

Reinstall League of Legends

Contact Riot Games Support

Let’s take a look at the description of the process involved concerning each of the listed solutions.

1] Initial checklist

Reset Internet Options. The LoL launcher uses Internet Explorer dependencies. Some temporary files generated by the Store component might end up creating this error code. In this case, you should be able to fix this problem by resetting Internet Options and as well clear browsing data on your gaming device.

Check your AV and Firewall. The issue you’re currently facing might be due to interference by Windows Firewall (not or less likely to be the culprit) or your third-party antivirus firewall or dedicated firewall. All the same, make sure to allow the LoL client through Windows Firewall and you can also whitelist the app. For third-party security software, refer to the manual or check the software settings menu; and you may have to temporarily disable the security software.

Continue with the rest of the solutions proper below if the initial checklist didn’t pan out.

2] Check Riot Games server status and your Internet connection

Most reported cases of the League of Legends Error Code 900 points to internet connection issues. So, first, you can check if Riot Games is currently dealing with a widespread server issue or outage at the official status page chúng tôi If you have successfully confirmed that you’re currently dealing with a server issue, there’s nothing much you can do but wait for the issue to be resolved by Riot Games developers.

On the other hand, if you determine that the website is not down and this is not a server problem, it could be regional. In this case, you can try using a VPN/GPN (if already connected via VPN, disconnect from the service) and see if that sorts the connection issue. In addition, to rule out general connectivity issues on your gaming PC, you can check and fix potential network and internet connection problems.

Read: League of Legends ping spikes on Windows PC

3] Reinstall League of Legends

This is a viable solution to the issue at hand, as you might be dealing with some kind of corrupted game files possibly after a security scan ended up quarantining some items belonging to the game (or some game dependencies). So, you can restore the quarantined items (if any) and see if that helps. Otherwise, you need to uninstall the LoL game; preferably use a third-party software uninstaller for a clean uninstall to remove all residual files that might be leftover which can interfere with a fresh install. Once the uninstall is complete, you can head over to the official Riot Games website, log in with your Riot ID and download the latest version of League of Legends to reinstall on your Windows 11/10 gaming PC.

4] Contact Riot Games Support

Hope this post helps you!

Related post: Fix League of Legends Error Code 003 on Windows PC

How do you repair League of Legends?

To repair LoL game, you can use the League of Legends Repair Tool to repair your game files. Here’s how:

Open the League of Legends Launcher.

What is Hextech Repair Tool?

Specifically designed for League of Legends, the Hextech Repair Tool is a simple application that can fix your LOL problems at the software level by optimizing game and PC settings using automated troubleshooting.

Error Code (0X8007042B) On Windows: Solved

Error Code (0x8007042b) on Windows: Solved Corrupt system files might stop you from getting the latest updates




The update error code 0x8007042b on Windows 10/11 can be caused by broken or corrupt system files.

Disabling third-party antivirus software is a quick and effective way to get past the error code.

Another effective solution is to run Windows Update multiple times or install the latest version via Media Creation Tool.



To fix Windows PC system issues, you will need a dedicated tool

Fortect is a tool that does not simply cleans up your PC, but has a repository with several millions of Windows System files stored in their initial version. When your PC encounters a problem, Fortect will fix it for you, by replacing bad files with fresh versions. To fix your current PC issue, here are the steps you need to take:

Download Fortect and install it on your PC.

Start the tool’s scanning process to look for corrupt files that are the source of your problem

Fortect has been downloaded by


readers this month.

Windows 10 and 11 offer various improvements over their predecessors while keeping prominent features. Nonetheless, with more than a few upgrades, we also encountered a large portion of issues.

Some of those issues are not addressed and are related to Windows update features. As we all know, the latest operating systems depend highly on updates.

And if you can’t obtain a particular update, you can’t expect to have up-to-date protection and features. 0x8007042B is one of those issues.

It prevents users from installing the latest build and occurs after the second boot phase while migrating data. This makes your PC vulnerable, as you won’t be able to use the latest security patches.

Just like we did with the Windows update error 0x800f0900, we will also show you proven ways to fix the error code: (0x8007042b) as well.

What does the error 0x8007042b mean?

There are a series of reasons for the Windows update error 0x8007042B. Below are some of the variations of the error and possible causes:

Failed to install 0x8007042b – Sometimes Windows Update process can fail due to this error. However, you can fix the issue simply by disabling your antivirus.

0x8007042b Windows 10 upgrade – This error commonly occurs when installing a new Windows 10. If you keep getting this error, you might want to try downloading and installing the update manually.

Windows 10 error code 0x8007042b 0x2000d/0x3000D/0x4001e – In some cases, this error message is followed by an additional error code. If this happens, try repairing your files and check if that solves the issue.

Failed to deserialize/execute Pre oobeboot operations Error 0x8007042B – Windows 10 installation failed in the second boot phase with an error during migrate_data operation

The process terminated unexpectedly 0x8007042b

How can I fix the error code 0x8007042B?

1. Remove additional USB peripherals

If you use the Media Creation Tool to install updates or upgrade your OS, you can have occasional USB conflicts. To prevent that, pull out all other devices except the system drive.

Some users reported this as a solution for this issue. Once they removed peripheral devices, the second boot failure stopped and the system updated as intended.

If you can’t download or install updates due to error 0x8007042B, you might be able to circumvent this error by installing the update manually.

Since you’re downloading and installing the update manually, you won’t encounter the error message, but the core problem might still be there and appear while downloading future updates.

3. Use a third-party software

4. Disable or uninstall antivirus

If you have problems with the update error 0x8007042B, you might want to try disabling certain antivirus features and check if that solves the problem. If the issue is still there, your next step would be to disable your antivirus entirely.

In some cases, disabling the antivirus won’t help, so your next step would be to uninstall your antivirus completely. Once the antivirus is removed, check if the issue reappears.

If removing the antivirus solves your problem, you might consider switching to a different antivirus solution. There are many great antivirus tools available.

5. Clear Recent items list

According to users, sometimes your Recent items list can cause the update error 0x8007042B to appear.

It seems that Windows might have some issues with the Recent list. You need to clear items from the Recent list to fix the problem.

After that, try to install the update again and check if the problem is resolved.

6. Perform DISM and SFC scans

According to users, the update error 0x8007042B can sometimes appear due to file corruption. In this case, you need to run an SFC scan to repair the files.

Expert tip:

If you could not run an SFC scan or if it didn’t fix the problem, your next step would be to perform a DISM scan.

To do that, you need to start Command Prompt as administrator and run the command below: DISM /Online /Cleanup-Image /RestoreHealth

DISM scan will now start, so be patient while it repairs your PC. The scan can take up to 20 minutes, so don’t interfere with it. Once the scan is finished, check if the problem is still there.

If the problem is still there, or if you couldn’t run the SFC scan before, repeat the SFC scan once again, and the issue will be permanently resolved.

Open Command Prompt as administrator.

When Command Prompt opens, type the following commands and press Enter after each: net stop wuauserv net stop cryptSvc net stop bits net stop msiserver ren C:WindowsSoftwareDistribution chúng tôi ren C:WindowsSystem32catroot2 chúng tôi net start wuauserv net start cryptSvc net start bits net start msiserver pause

According to users, if you’re having this issue, you might be able to solve it by resetting Windows Update components.

Your system relies on certain services to work correctly, and if these services are bugged, you’ll encounter the update error 0x8007042B. After running these commands, check if the problem is resolved.

Lastly, if you don’t want to run each command manually, you can always create a Windows Update reset script and run it to reset all Windows Update services quickly.

8. Perform System Restore

If you keep getting the update error 0x8007042B, you might be able to solve the problem by performing System Restore. Once your PC is restored, try to perform the upgrade again and check if the issue is still there.

If any of the previous workarounds haven’t helped you solve the update error 0x8007042B, you should move on to performing a clean install. If there’s corruption or other issues with system files, the only way to get rid of them is to reinstall your system.

Once it’s done, you can perform updates and resolve the code error. Note that this fix helps to install the latest Windows version without tampering with your files and applications. So, you can continue where you left off.

Also, you may have accidentally turned off this service and will simply need to reenable it.

Broken or faulty system files mainly cause the update error 0x8007042B on Windows 11. You can fix this by running the SFC and DISM scan, as shown in this guide.

Also, you might need to reset some of the Windows components to get past this error. As a matter of fact, all the solutions in this guide work well on Windows 10 and 11.

The update error 0x8007042B can be frustrating, as it stops you from getting beneficial updates. Fortunately, it is not the most challenging issue to fix, as shown in this guide.

Are you facing other issues like the Windows update error 0x800703f9? Then, check our detailed guide to fix it quickly.

Still experiencing issues?

Was this page helpful?


Start a conversation

Update the detailed information about Fix Windows Upgrade Error Code 8007001F – 0X3000D on the website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!