Trending December 2023 # Fix Boot Device Not Found Error In Windows 11/10 # Suggested January 2024 # Top 16 Popular

You are reading the article Fix Boot Device Not Found Error In Windows 11/10 updated in December 2023 on the website Bellydancehcm.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested January 2024 Fix Boot Device Not Found Error In Windows 11/10

What does the Boot device not found error mean?

When you install Windows on a drive, it becomes the boot device. When a computer boots, the BIOS or UEFI looks for the OS installed on that drive, and continues the process further. You can read about how Windows boots here. Coming back to the error code, when the BIOS or UEFI doesn’t find any device from which it can boot, it gives the error saying the boot device cannot be found.

Boot Device Not Found

These are the troubleshooting tips you can follow to overcome the Boot Device Not Found error. It could be a physical issue or a software issue.

Check connection with the boot drive

Change Boot Order

Fix Boot Record from Recovery

Check if Primary Partition is active

Make sure to prepare a bootable Windows USB drive. The last two option requires you to boot into Advanced Recovery Mode to execute commands.

1] Check connection with the boot drive

If you are using a custom PC that comes with a cabinet, we suggest you open it. Remove any connected power supply and check on the wires. Drives are connected with the motherboard through a cable. Check if both ends are connected well, and it’s not lost. It’s a good idea to detach and reattach and see if the boot works.

If you are using a laptop. You have two options. If you have the skills which help you open the laptop, and check for loose connection, go ahead. If not, take it to a service center if none of the other tips work.

2] Change Boot Order

When the computer boots, the BIOS or UEFI looks at the boot order. The order tells were to first look for a boot drive. If for some reason, a USB is connected to your computer, and the first boot device is USB, then you have sorted your problem. You can remove the USB and boot or get into the BIOS and change the Boot order.

If you are all good on the hardware, let’s try to fix it through the software. Use the bootable USB drive, boot into Advanced Recovery Mode, and open the Command Prompt.

3] Fix Boot Record Not Found from Recovery

In the Command Prompt, we will use the bootrec command to rebuild BCD or otherwise known as Boot Configuration Data. It contains boot configuration parameters on how to start your Windows. If it is corrupted, then BIOS will not be able to find the boot drive. You can use bootrec /rebuildbcd.

Read our detailed post on how to Repair Master Boot Record, where we use the following command options:

bootrec /fixmbr bootrec /fixboot bootrec /scanos bootrec /rebuildbcd

Once done, when you boot the computer, it will detect the boot drive, and load Windows OS.

4] Check if Primary Partition is active

On a hard drive which has multiple partitions, the one where you install Windows is called a Primary Partition. Apart from being Primary, it needs to be an active partition. You need to use the DiskPart tool to activate the partition. Since we cannot access the GUI, we will execute it from the Command Prompt.

DiskPart list disk select disk 0 list volume select volume X (where x is the volume where Windows is installed) active exit

Once done, the primary drive will be active, and you will be able to boot into the computer without any problem. Make sure to select the right volume; else you will have to come back, and change it again.

TIP: Disabling Local Security Authority protection is known to have helped many resolve this issue.

Hope this helped.

You're reading Fix Boot Device Not Found Error In Windows 11/10

Fix The Application Is Not Responding Error On Windows 11/10

The application is not responding error is one of the many issues users encounter when using Windows computers. This issue is quite annoying as it just shuts down programs without warning, which may, as a result, cause you to lose unsaved work and other things like that. In addition, numerous people have been spotted reporting this problem on other platforms, including the Microsoft forum and others.

Most often, people choose to close the software by hitting the End Process option on the error message. However, this never fixes the problem and only causes your computer to hang. So, you should be aware of the numerous factors that could be causing this problem on your computer. Hence, this post will offer seven solutions to the application is not responding error in Windows 11/10, as well as some additional information.

Reasons for “The application is not responding” error

There are just a few potential causes of this error message if it appears on your computer while you are using a software or a built-in feature like the Task Manager. Typically, if your computer doesn’t have enough memory to run a program, the application will crash and that could be the cause of the application not responding issue on your Windows computer.

Some users might not have updated their Windows recently, which means the computer may have bugs or other problems. This could be the cause of some programs crashing on these types of computers. Additionally, malware is widely known for causing issues like these. After correcting the problem with one of the fixes we’ll cover in the following section of this article, you must take note of these causes to keep it from happening again on your PC. The causes are listed below:

Malware issues

Insufficient memory

Outdated drivers

Bug in the program

Fix The application is not responding error in Windows 11/10

We’ve gathered a number of solutions to resolve the application is not responding error in Windows 11/10 here:

Restart your computer

Update Windows as well as the program

Run Antivirus

Run Memory Check

Run System Maintenance Troubleshooter

Check-in Clean Boot State

Increase RAM

Now, let’s cover how you can perform each of these workarounds effectively.

1] Restart your computer

If you happen to have been using your computer for a long hour, restarting the computer will help clear the memory as well as restart its services. Hence, your computer will operate more effectively as a result, and the problem you were having will be resolved. If this approach doesn’t work, though, try the next.

Read: Task Manager is not responding

2] Update Windows as well as the program

Windows 11

Press Windows + I keys to open Settings on your computer.

If there are any available Optional or Driver updates, install them.

Windows 10

Go to Settings on your computer.

Select Updates & Security.

Then check available Optional or Driver updates and install them if there are any.

If this issue is due to a pending Windows Update, this approach will help fix it.

You should also manually check if any updates are available for the program that is creating issues, and install them if they are available.

3] Run Antivirus

Having malware on your computer will have a negative impact on its performance in every regard you could imagine. So, getting this error message may also be as a result of malware. You should therefore run a malware scan using Windows Defender or any other antivirus software you may have installed on your computer.

4] Run Memory Check

Another thing you can do to resolve the “Application is not responding” error is to run a memory check. This approach will help out if your computer is having a memory leak or any other memory issue to know whether that’s the reason for the glitch you are facing or not. To run a memory check, do this:

Press Windows + R to open Run Command Box.

Type chúng tôi and select OK.

On the resulting window, pick any of the two options depending on which one is convenient for you.

If you choose to restart now, then wait for the test to run.

5] Troubleshoot in Clean Boot State

You can also perform a clean boot on your computer to determine what’s causing the problem. If the issue does persist after the clean boot troubleshooting, it indicates that a third-party process is the root of the problem, and you may need to run a troubleshooter on your computer. Furthermore, troubleshooting in a clean boot state involves a number of steps, all of which entail restarting your computer. In essence, the activities consist of turning off a few services and checking to see if the problem persists. This is only being done to identify and fix the glitch’s underlying cause.

6] Run System Maintenance troubleshooter

After trying other solutions, the issue is still happening; you can also try running the System Maintenance troubleshooter. To do that, follow these steps;

Press Windows + I to open Windows settings.

Afterward, restart your computer and check if the issue has been resolved.

7] Increase RAM

You may need to increase the RAM. This is sure to help you.

You could also optimize the computer for performance and Clean up Disk Space.

Similar: Programs not responding in Windows

What do I do if a program is completely unresponsive in Windows 11/10?

Read: How to kill a Not Responding process in Windows

Why is my application saying Not responding in Windows 11/10?

If your program stops responding on a Windows computer, most of the time, it can be traced to insufficient RAM. This means the program isn’t getting the amount of memory for it to run efficiently. More so, it can be due to a bug or malware on your computer.

Fix: Config Initialization Failed Error In Windows 10/11

FIX: CONFIG INITIALIZATION FAILED error in Windows 10/11

932

The config initialization failed Windows 10 error BSoD can be caused by both hardware and software problems.

To avoid the

security initialization failed Windows 10 error, it is important to constantly install the Windows updates.

For a stable system and free from BSoD errors, be sure to update your drivers with the newest compatible versions.

Certain hardware issues can also cause this

BSoD error, therefore make sure you check all of your PC components.

INSTALL BY CLICKING THE DOWNLOAD FILE

Try Outbyte Driver Updater to resolve driver issues entirely:

This software will simplify the process by both searching and updating your drivers to prevent various malfunctions and enhance your PC stability. Check all your drivers now in 3 easy steps:

Download Outbyte Driver Updater.

Launch it on your PC to find all the problematic drivers.

OutByte Driver Updater has been downloaded by

readers this month.

Blue Screen of Death errors can be caused by faulty hardware or incompatible software, and sometimes it’s difficult to pinpoint the exact problem.

Since these errors will crash Windows 10 and restart your computer frequently, it’s important that you fix them, therefore today we’re going to show you how to fix CONFIG INITIALIZATION FAILED error.

It is important that you follow the steps thoroughly, so make sure you do that since we will be using the Command Prompt and other methods.

How can I fix CONFIG INITIALIZATION FAILED BSoD error? 1. Use a system restoration tool

Manually finding out the root of the problem and trying to solve it is not the best and most reliable way to fix such problems. Moreover, it can be quite confusing for those who don’t have the necessary knowledge.

Therefore, we suggest installing specialized software that will scan your computer for you and download all the necessary files to repair it and bring it back to perfect condition.

Fortect is an application that specializes in Windows repair. It scans and diagnoses your damaged PC, then repairs it using technology that not only repairs your Windows Operating System but also reverses the harm done with a full database of replacement files.

Fortect is regarded as a complement to antivirus software, restoring the harm caused by malware after it has been isolated or removed by antivirus.

⇒ Get Fortect

2. Update your Windows

In order to avoid BSoD errors it’s crucial that you download and install Windows updates.

Certain hardware or software might have issues with Windows 10, and since hardware and software issues can create these types of errors, it’s extremely important that you update Windows 10 as often as you can.

In addition to many bug fixes, these updates bring improved stability, security as well as new features.

3. Update your drivers

Another common cause for BSoD errors can be your drivers. Drivers allow Windows 10 to recognize and use certain hardware.

And if particular driver is outdated or not compatible with Windows 10, you will most likely get CONFIG INITIALIZATION FAILED error.

In order to make sure that your system is stable and free from BSoD errors, be sure to update your drivers frequently.

To update a certain driver you just need to visit your hardware manufacturer’s website and download the latest drivers for your device.

Alternatively, you can download all the necessary drivers by using the Device Manager.

Some users claim that using Device Manager to update your drivers isn’t as effective as downloading them directly from the manufacturer’s website.

Device Manager sometimes won’t be able to download the latest drivers, so if you wish to have the latest drivers, you might have to search and download them manually.

Update drivers automatically

Using an automatic driver updater will certainly save you from the hassle of searching for drivers manually, and it will always keep your system up to date with the latest drivers.

⇒ Get Outbyte Driver Updater

4. Run the BSOD Troubleshooter

Now, let’s turn to troubleshooting tools. The very first troubleshooter we’re going to try is Windows 10’s built-in BSOD troubleshooter.

Hopefully, this tool can deal with the CONFIG INITIALIZATION FAILED error, as well.

5. Run the SFC scan

Go to Search, type cmd, and open Command Prompt as an administrator.

Enter the following line and press Enter: sfc/scannow

Wait until the process finishes (it’s a long one).

If the tool finds a corrupt system file, it will automatically repair it.

Now, close the Command Prompt and restart your computer.

Another troubleshooting tool we’re going to try here is the SFC scan. The system file checker is a command-line tool that basically scans through your system searching for potential issues.

If a corrupted system file is a problem, this tool will automatically repair it, and the problem will be resolved.

6. Run the DISM scan

And the third troubleshooter we’re going to try here is DISM. This tool re-deploys the system image, and resolves potential issues along the way.

So, it’s possible that running DISM will also resolve the CONFIG INITIALIZATION FAILED error.

Expert tip:

With the Windows installation media

7. Check the hard drive

To perform these commands, you need to know drive letters for all your hard drive partitions.

In Command Prompt you should enter the following (but remember to use the letters that match your hard drive partitions on your PC): chkdsk/r c: chkdsk/r d:

This is just our example, so keep in mind that you have to perform chkdsk command for every hard drive partition that you have.

Restart your computer afterward.

A broken hard drive is alarming. And the first warning messages come in the form of BSOD issues. So, go and check the current state of your hard drive.

To do that, you should run the chkdsk command. This command will scan your partitions, and apply solutions, if possible.

8. Disable caching on your motherboard

A Few users reported that disabling the caching on the motherboard has fixed the REFMON INITIALIZATION FAILED Blue Screen of Death error.

You can disable caching from BIOS, but for detailed instructions on how to do it, be sure to check your motherboard manual.

Since every motherboard is different, so is its interface. Make sure you find out your motherboard’s model and look for your instructions manual that came in its box. There, you’ll most likely find all the information you need.

If you’re using an SSD, be sure to update your firmware. Few users reported that they managed to fix the issue by updating their SSD firmware, so you can try that.

It’s worth mentioning that updating your firmware might delete all files from that SSD, so keep that in mind.

10. Check for problematic software

Sometimes certain software can cause CONFIG INITIALIZATION FAILED BSoD error to appear.

Almost any installed software can cause this error, and if you installed any new software recently be sure to remove it.

A common cause for BSoD errors can be your antivirus software, therefore you might want to remove it in order to fix this error.

It’s worth mentioning that almost any antivirus program can cause this error, so be sure to remove any antivirus tool that you have installed.

If removing the antivirus fixed the problem, you can now download the latest version of the same tool, or you can switch to a different antivirus software.

If you’re looking for an alternative, we wrote about best antivirus programs for Windows 10, so be sure to check them out.

If you cannot access Windows 10 at all due to CONFIG INITIALIZATION FAILED error, you can try removing the problematic applications from Safe Mode.

To access Safe Mode, do the following:

When you enter Safe Mode, try finding and removing the problematic application that is causing the BSoD error.

Bear in mind that if your computer is working without any problems in Safe Mode, the BSoD error is probably caused by a certain application or a driver, so you need to find it and remove it.

Uninstaller software is meant to swiftly delete any undesirable program along with its associated files, resulting in a safe, fast, and light PC.

Logged applications, folders, registries, and any other leftovers will be checked and displayed at a glance, allowing you to swiftly wipe up any leftovers. For stubborn software, such as antivirus, you can also use force removal to start over fresh.

11. Check for problematic hardware

BSoD errors such as CONFIG INITIALIZATION FAILED can be caused by new hardware, and if you installed any new hardware recently be sure to remove it or replace it.

Sometimes certain hardware isn’t fully compatible with your PC and that can cause BSoD error.

In addition to new hardware, faulty hardware can also cause these types of errors. RAM is the common cause for these types of errors, so be sure to test your RAM with tools such as MemTest86+.

Remember to keep testing your RAM for couple of hours in order to perform a thorough scan.

If your RAM is working properly, check other hardware such as your motherboard, hard drive, graphics card, and processor.

Was this page helpful?

Start a conversation

Fix Microsoft Store Error 0Xd000000D On Windows 11/10

Microsoft Store is excellent to browse and install apps on your Windows system in a safe and convenient manner. However, a few users have reported that they encounter Microsoft Store error 0xD000000D on their system. If you encounter the same error, please read through this article for the resolutions.

Fix Microsoft Store error 0xD000000D

The Microsoft Store error 0xD000000D occurs while trying to open the Microsoft Store or an application downloaded from the Microsoft Store. The primary cause is that a Windows update could have messed up with the settings. In this case, running the Windows Store apps troubleshooter can fix the problem. The other cause could be corruption inside the Windows Store folder. It could either be with the cache or the system files.

Try the following solutions sequentially to resolve Microsoft Store error 0xD000000D:

Run the Windows Store apps troubleshooter

Reset Windows Store settings

Clear the Microsoft Store cache

Re-register or reinstall the Windows Store

Reset your operating system

1] Run the Windows Store apps troubleshooter

The Windows Store apps troubleshooter is an excellent tool to resolve problems related to the Windows Store and applications installed through it. The procedure to run the Windows Store Apps is as follows.

From the Settings menu, go to the System tab on the list on the left-hand side.

In the right pane, select Troubleshoot from the list.

In the next window, select Other troubleshooters.

2] Reset Windows Store settings

In case you changed settings, it might cause the error in discussion while trying to download an app from the Windows Store. To isolate this probability, you can consider resetting the Microsoft Store settings. The procedure is as follows.

In the Settings window, go to Apps on the list on the left-hand side.

Now, in the right pane, go to Apps & features.

Select Advanced options.

3] Clear the Microsoft Store cache

Corrupt Microsoft Store cache can cause problems with the application including the one in discussion. To overcome the same, you can clear the Microsoft Store cache. Press Win+R to open the Run window. In the Run window, type the command chúng tôi and hit Enter to reset the cache.

4] Re-register or reinstall the Windows Store

If everything else fails, you can consider reinstalling the Windows Store. In this case, all existing files associated with the Windows Store will be deleted and when you reinstall it, the Microsoft Store will work as a new software.

5] Reset your operating system

If everything else fails, you can consider resetting your operating system. While doing so, all settings you changed would be undone. There are options to save your data or delete everything. Please choose as per your convenience.

Why is Microsoft Store blocked?

Microsoft Store can be blocked either by a third-party software or using a policy on the Group Policy editor by a system administrator. In case you encounter this problem, you can ask the system administrator to disable the policy.

Where are Microsoft Store apps installed?

Microsoft Store apps are installed on the location C:/Program Files/WindowsApps. However, you can access them through the Start menu. Even more, most apps tend to create a desktop shortcut for ease of use.

Full Fix: Windows 10/11 Photo Enhancer Not Working

Full fix: Windows 10/11 Photo Enhancer not working

If you’re dealing with a severe case of enhance your photo not working, your creative flow will get disrupted for sure.

The way we see it, with Windows photos enhance not working, you get more than a disturbance in the force – it is a good opportunity to consider more modern photo editing alternatives.

If you’re not so eager to ditch the built-in tools, you can always run the built-in troubleshooter.

A Windows 10 photos auto enhance missing case can also be an indicator that you’re lacking some important updates and that’s always a path worth exploring.

Windows (Microsoft) Photos would be a great photo-editing app if there weren’t so many bugs.

There are many things going for it, but it seems that, when it comes to stability, this app falls short for many users.

But, it seems that this nifty retouching tool stopped working recently.

If you’re dealing with a severe case of enhance your photo not working, worry not as we prepared a list of available solutions.

At least one of those should help you address the matter at hand, so don’t hesitate to try our fixes to solve the Windows photos enhance not working.

How can I fix Enhance your photo mode issues in Windows 10? 1. Download Adobe Photoshop

If your Photo Enhance is not working in Windows 10, the easiest solution is to use an alternative. The best photo enhancement and editing tool available on the market right now is Adobe Photoshop.

This software tool has a wide range of features and options.

It can be downloaded and installed in just a couple of steps, without the hassle of a complex process with confusing steps.

Photoshop is the first choice of beginners and professionals, mainly because of its plethora of editing tools and ease of use.

A large number of brushes, filters, and photo effects add to the complete experience that Photoshop offers.

Besides that, the customizable workspace with lots of easy-to-use options is another big plus.

Frame tools, slicing tools, magic wand, symmetry mode, white balance, color gamma, and color correction are just some of the many features in Photoshop that can help you enhance your photos.

Adobe Photoshop

If the Photos app is failing, the most cherished photo editing software will definitely enhance your artwork!

Free trialVisit website

2. Run the built-in troubleshooter

Here’s how to run the dedicated troubleshooter and try fixing the Photos app and the Enhance your photo mode:

The first troubleshooting step is the built-in part of Windows 10. Since the Photos app is an integral part of the Windows 10 workflow, there’s the dedicated troubleshooter which deals with app issues.

The idea was for UWP apps to take over, but even the built-in ones, like Photos and Mail & Calendar, fall short. This is where the Store Apps troubleshooter comes into play.

3. Update Windows 10

Here’s the whole route:

The number of times Microsoft changed the Photos app since its inception on Windows 8 can barely count.

Expert tip:

Now you’ll need to apply this to every individual photo. And even that, obviously, won’t function as initially intended. If this was a minor problem, Microsoft might’ve put it under the rug.

However, since there were (and still are) lots of complaints, they had to do something. And, seemingly, they did.

That’s why we encourage you to check for the latest updates. In addition, make your way to Microsoft Store and check for updates there, as well.

4. Reset the app

Here’s how to reset the Photos app in Windows 10:

As you’re probably aware, one can’t uninstall the Photos app. It’s a successor to Windows Photo Viewer and the main competition to Google Photos.

You can, on the other hand, reset the app to factory values. This won’t meddle with your photos, so don’t worry about it.

It’ll just clear all pilled-up cache and, basically, refresh everything as it’s the first time you’re starting the app.

5. Reinstall Windows Photos

Follow these steps to reinstall Windows Photos in Windows 10:

Yes, we said you can’t remove Windows Photos. But that doesn’t exclusively mean the app can’t be reinstalled. Of course, this requires a more complex approach than the previously suggested solution.

In order to reinstall the Windows Photos app (or any built-in app, for that matter), you’ll need to use PowerShell as shown above.

6. Try sticking to local photos only

Here’s how to disable OneDrive for Windows Photos:

You can, without downloading, access all photos stored in OneDrive. However, there are some reports that this causes the slowdowns and additional issues with Windows Photos.

Especially if you’ve changed the default OneDrive locale on your PC or the photos are only online-stored.

Because of that, we recommend unlinking the OneDrive and Windows Photos (if this link isn’t a dire need). You could still access all photos on your local storage.

Also, leave there any other questions or suggestions that you may have.

Was this page helpful?

Start a conversation

Fix Windows 10/11 Error Code 0Xc0000034 With These Solutions

Fix Windows 10/11 error code 0xc0000034 with these solutions

INSTALL BY CLICKING THE DOWNLOAD FILE

Try Outbyte Driver Updater to resolve driver issues entirely:

This software will simplify the process by both searching and updating your drivers to prevent various malfunctions and enhance your PC stability. Check all your drivers now in 3 easy steps:

Download Outbyte Driver Updater.

Launch it on your PC to find all the problematic drivers.

OutByte Driver Updater has been downloaded by

readers this month.

Most of us often encounter the annoying Blue screens of death problems on our different versions of Windows.

You will see that the screen will simply turn blue or the system will completely fail to boot.

What causes error 0xc0000034?

1. Bad sectors on Hard drive

All the critical system files will not be readable if you have bad sectors on your hard drive.

2. Corrupted Windows installation

You might have a corrupted installation of Windows as your OS crashed due to a malware or other reasons.

3. Missing boot files

Damaged BCD is a possible cause of the 0xc0000034 error. It occurs because your boot-related files are either corrupt, missing, misconfigured and damaged.

4. Compatibility Issues

Some of the users face the error because the recently changed hardware or software has compatibility issues with their PCs.

If you are a Windows 10 user you will see the following error message on your blue screen:

Press ESC for UEFI Firmware Settings.

How to get rid of

Windows 10 error code 0xc0000034?

1. Run Windows automatic repair

Expert tip:

Windows provides an Automatic Repair tool that uses the Windows installation media (DVD, CD or USB drive) to fix the issue in a few steps. Here are some simple steps that you need to follow:

Insert the Windows 10 DVD or USB stick and restart your system.

Make sure to boot your system using the Windows installation media instead of your hard drive. You need to constantly press the specified key (F8 or F11 key depending upon your system) and choose the correct boot device.

You will see a list of operating systems, select the one you currently have. A repairing process will start to check your Windows for problems and fix them.

Wait patiently until the end of the process.

If the first solution fails to fix the error, try the next solution.

2. Manually repair the error

This method requires a Windows 10 setup bootable media, so you can fix the error by following these steps.

First, plug in Windows 10 DVD or USB stick after starting your PC. The system will prompt you to select your keyboard and language settings.

Select the Repair your computer option.

As soon as you see a Command Prompt window, enter the following commands and press Enter key after entering each of them.

bootrec /fixMBR

bootrec /fixBoot

bootrec/scanos

bootrec /rebuildBCD

At this step add the installation to the boot list by typing A and pressing the Enter key.

In the end, you will proceed to the Windows 10 home screen.

As you have finished the entire process the Windows 10 Error Code 0xc0000034 should be fixed and your system should boot normally. If the problem still persists try the next solution.

3. Refresh Your PC

When you are unable to repair your PC using any of the above-mentioned solutions you can use Windows Recovery Environment (WinRE) to perform Automatic repair.

Please follow the following steps to refresh your Windows 10 PC:

At the first step, you have to Reboot your PC.

Next, you need to hit the F8 or F11 key (depending upon your system) to

open Advanced boot options.

On the next screen select Troubleshoot and then Refresh your PC.

Follow the instructions to complete the process.

How can I avoid the error in the future?

You have to care about the health of your Windows OS if you want to avoid this error in future. You should avoid downloading any suspicious programs that can be potentially harmful to your system. In case your system gets infected with any malware, scan your PC with antivirus software.

Most importantly, regularly updating your PC is the best solution to keep your system bug-free. Microsoft regularly releases updates including bugs and fixes to protect your PC. Following these simple steps can protect your PC from unnecessary damage and future issues.