Trending February 2024 # Fix: Asus Bandwidth Limiter Not Working # Suggested March 2024 # Top 3 Popular

You are reading the article Fix: Asus Bandwidth Limiter Not Working updated in February 2024 on the website We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested March 2024 Fix: Asus Bandwidth Limiter Not Working

FIX: Asus bandwidth limiter not working




The Asus bandwidth limiter not working problem is usually triggered due to incorrect network configuration.

IPv6 can cause this problem, so you might have to adjust your settings to fix this this issue.

For better network monitoring and bandwidth usage control features consider using specialized network monitoring software.

If QoS is not working on Asus router, you might have to check your firmware and update it.



To fix Windows PC system issues, you will need a dedicated tool

Fortect is a tool that does not simply cleans up your PC, but has a repository with several millions of Windows System files stored in their initial version. When your PC encounters a problem, Fortect will fix it for you, by replacing bad files with fresh versions. To fix your current PC issue, here are the steps you need to take:

Download Fortect and install it on your PC.

Start the tool’s scanning process to look for corrupt files that are the source of your problem

Fortect has been downloaded by


readers this month.

Most of the Asus routers come with a built-in bandwidth limiter feature out of the box. However, several users have reported the Asus bandwidth limiter not working issue when setting up the feature.

The bandwidth limiter allows the user to control and monitor Internet traffic. This issue can occur on new and existing Asus routers, and the reasons can vary, including incorrect network configuration and hardware failure.

In this article, we take a look at a few troubleshooting steps to help you resolve the Asus bandwidth limiter not working problem quickly.

How do I fix the Asus bandwidth limiter not working? 1. Use a third-party bandwidth limiter 

While the built-in bandwidth limiter offers basic network monitoring and traffic control features, specialized bandwidth limiter software like PRTG Network Monitor is an excellent tool for network monitoring and traffic management.

PRTG Network Monitor specializes in capturing networking traffic in multiple ways. It uses protocols such as SNMP, packet sniffing, and NetFlow to help you manage and monitor your network.

PRTG Network Monitor

Limit your bandwidth and monitor your network like a pro with PRTG Network Monitor software.

Free trialVisit website

2. Disable IPv6 on Asus router

Expert tip:

According to Asus, the network bandwidth limiter stops working if you turn on IPv6. This is due to the bandwidth limiter not supporting IPv6 for the router.

3. Disable NAT Acceleration 

After the reboot is complete, reconnect your router and check if the Asus bandwidth limiter not working problem is resolved.

NAT acceleration is a set of hardware tools and software features to speed up a fast Internet connection on NAT routers.

Asus routers support both QoS bandwidth limiter and NAT acceleration functions. However, these two functions cannot work at the same time. So, if you want to use a bandwidth limiter, make sure NAT acceleration is disabled.

The Asus bandwidth limiter not working issue in your router can occur due to several reasons. First, make sure the NAT acceleration is disabled, and turn off IPv6 as it is not supported by the bandwidth limiter feature.

Still experiencing issues?

Was this page helpful?


Start a conversation

You're reading Fix: Asus Bandwidth Limiter Not Working

Fix: Steam Captcha Not Working

Steam is one of the most popular and widely used gaming apps out there, and for good reason too. Not only can you play games there but also create them. While some games are free, others are to be paid for. In order to access games on Steam, you have to have a Steam account. While signing into your steam account, there’s a captcha prompt that you have to fill in. Several users have reported the captcha not working, declaring the correct captcha response as invalid. The error’s message says:

Your response to the CAPTCHA appears to be invalid. Please re-verify that you’re not a robot below.

In this article, we will discuss what you can do if that’s the case for you too.

Fix Steam Captcha not working

If you face this issue, do the following:

Clear browser cookies and site data

Change your browser

Flush DNS Cache & Reset Winsock

Disable Proxy or VPN server

Create an account from the Steam server

1] Clear browser cookies and site data

It may help you to get rid of the cookies and clear the cache data before retrying the captcha verification. Here’s how you can do that on Google Chrome:

From the page that this option subsequently opens, select the Advanced tab. Here, select the time range to be ‘All Time’ and check-mark the ‘Cookies and other site data’ and ‘Cached images and files’ boxes.

2] Change your browser

If clearing the browsing data was of no help, then you can try changing your browser. Most people use Steam via Chrome and since Steam’s captcha verification is done via a Chrome fork, it is possible that Chrome is causing the issue.

If that is the case, you can try switching to a different browser, one that isn’t based on Chrome. Examples of that include Microsoft Edge, Firefox, etc.

3] Flush DNS Cache & Reset Winsock using Command Prompt

The DNS cache is a temporary database of some of the most recent visits to websites made on your computer. It is stored by your PC’s Operating System and you can try clearing it using the command prompt to rid yourself of the Steam Captcha error. Here’s how:

Launch the Command Prompt as administrator

In the command prompt window, type the following command line and press Enter to execute it

ipconfig /flushdns netsh winsock reset

The latter command will reset Winsock.

4] Disable Proxy or VPN server

Here’s how you can disable the proxy server on your PC:

Open the Run command box by pressing the Windows and ‘R’ keys together and in the blank space type ‘ms-settings:network-proxy’. This will open the Proxy settings

Under the Manual Proxy setup head, toggle off the ‘Use a proxy server’ option

Log into Steam and check if the issue has been resolved

Since VPN is a third-party application, simply disabling or uninstalling it will also do the job for you.

5] Create an account from the Steam server

Another thing you can try doing is making a Steam account on their server and not the website via your PC. Steam’s server link is chúng tôi Fill in the required credentials like your e-mail ID, country of residence, etc and you’re set. Signing up via the server doesn’t require you to go through a captcha verification, so in this way, you can sidestep it.

How do I automatically fill Captcha?

In all possibilities, there may be some of you out there who don’t want to spend time deciphering what the captcha code means. 0’s and O’s can get confusing, and you may get the letter-case wrong since most captcha codes are case-sensitive. Lucky for those, there are several web browser extensions that can help automate this verification process. These extensions help you auto solve the captcha codes, thus saving you time.

Some of the most popular browser extensions to auto-fill captcha codes are AntiCaptcha, Buster, and ReCaptcha Solver.

How to bypass Google ReCAPTCHA Images?

Google ReCAPTCHA quiz is where you have to answer where a certain object is, for example, a bus or bike, in a set of pictures. They can get a little tricky and also seem to be very unnecessary. There are certain things you can try in an attempt to bypass it successfully such as:

Use a VPN

Use ReCAPTCHA Bypass Bots

Use Sign-in Google Search

We hope that this post was able to clear all your doubts concerning Steam’s Captcha verification code and how you can get out of that problem.

Fix: Touchpad Not Working On Windows 10

Work your way through the troubleshooting tips below to fix issues with touchpad not working in Windows. Meanwhile, you could connect an external mouse or activate Mouse Keys to navigate the operating system.

Table of Contents

1. Turn On the Touchpad

Your laptop may have a special key that enables and disables the built-in touchpad. It’s usually mapped to a function key (such as F7 on Acer laptops), and you could’ve toggled it by accident. Press it and check if you can then move the cursor around.

If you use an external trackpad device with your Windows 10 computer, look for a power switch and make sure it’s set to On. Additionally, if the device uses a wireless connection, you must ensure that it’s fully charged.

2. Enable Touchpad in Windows 10

You’ll also find an option capable of turning your touchpad on and off within the Windows 10 settings. Check it out.

2. Select Devices.

3. Select Touchpad on the sidebar. Then, make sure that the switch underneath Touchpad is active.

Additionally, the Touchpad settings screen features Leave touchpad on when a mouse is connected. If your computer deactivates the touchpad whenever you connect a mouse, make sure to enable it.

3. Review/Reset Touchpad Settings

The Settings app in Windows 10 contains a slew of additional settings that help you determine how the touchpad works. If the device is responsive but not the way you want, review them and make necessary modifications.

2. Scroll down to the Taps, Scroll and zoom, Three-finger gestures, Four-finger gestures sections, and ensure that nothing is amiss.

3. If everything looks okay, but you still keep encountering issues, scroll down to the Reset your touchpad section and select Reset. That helps remove any corrupt configurations. Then, readjust the settings.

4. Restart Laptop or Desktop Device 5. Disconnect/Reconnect Touchpad

If the issue occurs with an external touchpad, just remove and plug the USB cable or wireless receiver back in (preferably to a different USB port) and check if the issue recurs. If possible, avoid connecting it to any USB hubs.

If the touchpad relies on Bluetooth for connectivity, you must remove the device from Windows 10  and repair it with your computer.

2. Select your touchpad and select Remove device.

3. Select the Add Bluetooth or other device option to pair the touchpad.

6. Check the BIOS/UEFI

You could fix an unresponsive or malfunctioning touchpad by visiting your laptop’s BIOS/UEFI. Locate the touchpad setting and reconfigure it as needed. The procedure differs among laptop models, so you may want to refer to a user manual or online documentation for specific instructions. But here’s a general rundown.

1. Restart your laptop and press the relevant function key to enter the BIOS/UEFI—e.g., F2, F9, F10, or F12.

2. Locate the setting related to the touchpad using the arrow keys. For example, it could be listed as Touchpad or Internal Pointing Device.

3. Make sure that it’s set to Enabled or Advanced. If not, press the Enter button and adjust.

Important: If you’ve made changes, go to the Exit menu and save them before exiting the BIOS/UEFI.

7. Uninstall and Reinstall Device Manager

Try uninstalling and reinstalling the touchpad driver via the Device Manager to help rule out issues with driver corruption.

2. Locate and select the touchpad device driver under Human Interface Devices or Mice and other pointing devices.

4. Select Uninstall again to remove the driver.

5. Restart your computer to reinstall the touchpad driver automatically.

8. Update Drivers & Install Support Software

Your next shot at fixing the issue involves double-checking that Windows 10 has installed the latest drivers for the touchpad. 

If Windows 10 fails to procure newer drivers, search for updates via Windows Updates or download the latest drivers from your laptop manufacturer’s site—e.g., Dell, HP, Lenovo—and use the Browse my computer to install the driver options.

Your touchpad may also require additional driver software to work correctly. Look up the manufacturer’s website and download if available—e.g., Logitech Options.

9. Check Computer for Malware

Computer viruses can hijack critical system settings and prevent devices such as the touchpad from working correctly. If none of the above fixes work, we recommend downloading and installing a dedicated anti-malware remover such as Malwarebytes. Then, perform a system-wide scan for malware.

10. Update Windows 10

Finally, it’s a good idea to update the operating system. Touchpad problems can be system-related, and the latest Windows 10 updates often address many known issues.

1. Open the Start menu and select Settings.

2. Select Windows Update.

3. Select Check for updates to check for and install the latest Windows 10 updates. 

Also, select View optional updates (if you see the option within the Windows Update screen) and install any touchpad-specific drivers.

Contact Laptop or Touchpad Manufacturer

Fix: Microsoft Xps Document Writer Missing/Not Working

Fix: Microsoft XPS Document writer missing/not working






To fix Windows PC system issues, you will need a dedicated tool

Fortect is a tool that does not simply cleans up your PC, but has a repository with several millions of Windows System files stored in their initial version. When your PC encounters a problem, Fortect will fix it for you, by replacing bad files with fresh versions. To fix your current PC issue, here are the steps you need to take:

Download Fortect and install it on your PC.

Start the tool’s scanning process to look for corrupt files that are the source of your problem

Fortect has been downloaded by


readers this month.

By default, Microsoft is using two virtual print drivers: Microsoft Print to PDF and Microsoft XPS Document Writer. Now, based on these two drivers and on their functionality you will be able to customize the printing process right from your own Windows 10 system.

So, if, for example, the Microsoft XPS Document Writer is missing or it’s not working, you might not be able to print your docs and files and that might be a real problem.

Anyway, if you know that this virtual driver used to work without issues and that something recently went wrong, don’t panic. The troubleshooting steps from below should help you fix the Microsoft XPS Document Writer is missing or is not working problem.

6 ways to fix Microsoft XPS Document Writer missing / not working

Solution 1 – Apply any pending Windows 10 updates.

Solution 2 – Fix Windows 10 update problems.

Solution 3 – Uninstall a recently applied system update.

Solution 4 – Update printer drivers.

Solution 5 – Manually reinstall Microsoft XPS Document Writer virtual driver.

Solution 6 – Check for system malfunctions.

You might have problems while trying to access and use Microsoft XPS Document Writer if your system is not running on the latest available update patch. So, first of all, make sure that there aren’t any pending updates waiting for your approval. You can check for updates and apply new system patches by following:

If the problems appeared right after you installed a new Windows 10 update, you need to verify if problems occurred during the flashing process. So, in that matter, you have to run a dedicated troubleshooter. Don’t worry, you won’t have to use a third-party app or any other similar risky app, but an official program developed and offered by Microsoft.

Thus, go ahead and download the Microsoft update troubleshooter engine from this page – just run the executable file and follow on-screen prompts if that’s required (if problems are found everything should be automatically fixed).

If the official troubleshooter engine cannot repair your Windows 10 system, so if you still cannot use the Microsoft XPS Document Writer software, a better idea will be to uninstall the update package that caused the problem in the first case. Here is how you can complete this particular process:

During certain updates or while a new app is installed, some of your drivers might require some attention. Shortly, you need to refresh the Microsoft XPS Document Writer drivers if problems are experienced – maybe the drivers just need to be updated, situation during which you will have to follow:

Expert tip:

The driver updater program is handy for automatically updating Windows drivers. Otherwise, doing it manually takes time and requires extensive knowledge of the drivers you’re looking for.

⇒ Get Outbyte Driver Updater

5. Manually reinstall Microsoft XPS Document Writer virtual driver

In other situations, updating the virtual drivers might just not be enough. In those cases you will have to manually reinstall Microsoft XPS Document Writer:

So, through the steps from above you managed to uninstall Microsoft XPS Document Writer from your computer; now, let’s see how you can reinstall it:

6. Check for system malfunctions

If the steps from above aren’t solving your problems you should check for system errors – if a process got corrupted or if similar malfunctions were caused due to different other reasons, you should scan your Windows 10 PC by using a built-in Microsoft feature. The scan process will look for problems and if something is detected the software will also try to automatically fix the issues; anyway, here is how this troubleshooting solution can be applied on your device:


The steps from above should solve the Microsoft XPS Document Writer is missing or isn’t working issues. Of course, if you are still experiencing the same problems, return here and try to describe the errors you receive in detail.

Still experiencing issues?

Was this page helpful?


How To Fix Clownfish Voice Changer Not Working

How to Fix Clownfish Voice Changer not working 100% Working Fixes For Clownfish Voice Changer App Not Working

1. Get The Latest Version Of Clownfish

One of the reasons why Clownfish voice changer is not working could be because you have an outdated version of the application. Simply, updating the application can help resolve the issue. Here is how you can update the application –

In the Windows search bar type Control Panel and press Enter

Go to the official website of Clownfish Voice Changer

Download and install the latest version of the Clownfish Voice Changer app

Restart the application and check the app

2. Check If Clownfish Voice Changer App Is Installed In The Default Folder

3. See If Your Microphone is Working Fine

Clownfish Voice Changer app uses your microphone. So, it could be that there are some issues with the microphone settings. First, check if the microphone settings of your computer are fine or not. Check the same for the microphone attached to your computer. You may also have to check if the microphone is correctly installed in the Clownfish Voice Changer app whether in Discord, Skype, or any other platform. Here are the steps to do the same –

Run the Clownfish Voice Changer application

Restart your computer and check if the application is working properly or not

There are times when Microphone settings might not be the issue, instead, it could be that you have an outdated or incorrect microphone driver. You can either go to your microphone’s official website and then install the correct driver. This again leaves a lot of scope for errors as you might stumble upon an incorrect driver. So, instead, you can use driver updater software like IObit Driver Booster 8.

IObit Driver Booster has a database that spans over 4500000 drivers and can be downloaded and installed both online and offline. Here are some of the other features of IObit Driver Booster 8 –

The software shows you when exactly was a driver last updated

Offline driver update functionality in case you don’t have access to the internet

Real-time quick driver updates relieve you of constantly worrying about drivers now and then

You can backup, rollback and uninstall drivers right from within the application

Auto-update and auto-backup facility

How to Update Drivers With IObit Driver Booster 8?

If your microphone driver is outdated, it will be listed

Download IObit Driver Booster 8

Let’s assume that you use Clownfish on Discord and that is where you are facing the issues. So, to update the Discord, you do not have to necessarily shut down the app, instead follow the steps mentioned below –

While the Discord app is running, maximize the window

Press Ctrl + R shortcut. This will refresh the user-interface

If there is a pending update, the application itself will detect and download it

The next time you will open the application, it will be updated

Wrapping Up

Do let us know if the above-mentioned fixes helped you resolve the Clownfish Voice Changer not working issue. For more such updates, keep reading Tweak Library. You can also connect with us on Facebook, YouTube, Flipboard, Pinterest, Instagram, and Tumblr.

Next Readings:

How To Install Drivers Without Internet Connection

Cool And Harmless WhatsApp Pranks

How To Update Keyboard Driver For Windows 10

Quick Reaction:

About the author

Sarang Bhargava

Fix: Share My Location Not Working On Iphone

Fix: Share My Location Not Working on iPhone

So, before we go to the solutions/fixes to the problem, let us see the reasons causing this error.

Reasons Causing Share My Location Not Working On iPhone

A shared location may not function correctly on your device for several reasons. I’ve included a few typical causes here that you should be aware of.

You have the incorrect Date & Time on your iPhone.

You are using outdated Maps.

Maybe “Share My Location” is disabled.

Internet connection problem.

Not signed in with your Apple Id.

Location Services are off.

So, these are some common reasons you are facing this share my location on iPhone not working error. And with these out of the way, let’s jump on the possible fixes for this error.

How To Fix iPhone Share My Location Not Working

Follow these fixes step-by-step to get rid of the problem.

Fix 1: Enable The Location Services

Open “Settings” on your iPhone.

Now scroll down until you see the “Privacy” option and tap on it.

Under privacy settings, look for and tap on “Location Services.”

Look for the “Toggle” switch in front of the location services. Enable it by just tapping on it if it is disabled.

Fix 2: Ensure That Share My Location Is Enable

Open “Settings” on your iPhone.

Tap on your “Apple Id” from the top.

Tap on Find My.

Now look for “Share My Location” and tap on it.

Hit the toggle button in the right front of “Share My Location” to turn it on.

Fix 3: Change Content & Privacy Restrictions On Your iPhone.

Modifying certain Content & Privacy Restrictions is the next solution for the issue with iPhone Share Location not working. The steps listed below will help you determine what needs to change:

Open “Settings” on your iPhone.

Look for and tap the “Screen Time” option on the settings page.

You will need our Apple ID credentials and a 4-digit pin to open the screen time option.

On the screen time page, scroll down and tap on the “Content & Privacy Restrictions” option.

On the “Content & Privacy Restrictions” page, tap on Location Services to allow under the Privacy section.

Now enter your passcode to confirm.

After that, tap Share My Location and turn it on by hitting the toggle button.

Fix 4: Restart Your iPhone.

You may quickly fix any temporary issues and have a fully functional device by restarting it. So to restart your iPhone, follow the steps below:

Hold down the power button for a few seconds.

Select Restart Device by tapping it.

You can fix the iPhone share location not working error by restarting your phone.

Fix 5: Update Your Device

Last but not least, updating the iPhone OS is another straightforward method you can try to resolve the share my location not working problem. To do so, follow the steps below:

Open the “Settings” app on your iPhone.

Scroll down a bit and choose “General.”

On the general settings page, look and tap on “Software Update.”

Read Also: What is Lockdown Mode In iOS 16? How To Enable Lockdown Mode On iPhone

To Wrap This Up

Quick Reaction:

About the author

Sourabh Baghel

Update the detailed information about Fix: Asus Bandwidth Limiter Not Working on the website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!