Trending November 2023 # Cpu Is Not Running At Full Speed Or Capacity In Windows 11/10 # Suggested December 2023 # Top 12 Popular

You are reading the article Cpu Is Not Running At Full Speed Or Capacity In Windows 11/10 updated in November 2023 on the website We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested December 2023 Cpu Is Not Running At Full Speed Or Capacity In Windows 11/10

Almost on any Windows laptop or desktop, the speed at which the CPU runs varies. You should know that the CPU doesn’t run at full speed all the time. It depends on how the OS distributes the load, and it works accordingly. However, if the CPU is not running at full speed in Windows 11/10, even on a heavy workload, then the situation needs some attention. If you want to verify, you can run any CPU stress test tool to check if the speed stays low.

CPU is not running at full speed or capacity

This scenario occurs more often in laptops as they run on battery. Intel Processor uses Speed Stepping Technology. It means when you are, doing small tasks the speed of the processor is reduced.

However, if this happens when using a heavy application, it can be because of a low charge on the battery. Windows will try its best to keep the computer running as long as possible. It does it by reducing the processor or CPU speed. However, at times, you are ready to sacrifice battery to make sure the work completes on time.

1] Set the processor state to the maximum in Power Options

Type control in the search box. It will reveal the classic Control Panel along with popular options.

Select 100% when it’s on Battery and Plugged in.

Next, expand the System cooling policy option, and make sure to set it as Active. This will make sure there will no overheating.

Apply this change to all the profiles of power management.

This way, your CPU will run at maximum power all the time.

2] Update or disable the Intel Power Management Driver

Intel-powered computers have dedicated software that controls CPU speed, and Fan speed when it needs to save battery. You can try to disable it, temporarily and check if the CPU fan speed changes.

Restart the computer by holding the SHIFT key to boot the computer into Advanced Startup Options screen.

Change directory to C:WindowsSystem32driver.

Rename Intelppm file by using this command:

ren chúng tôi intelppm.sys.bak

Reboot the computer.

In case you cannot find the drivers in C:WindowsSystem32driver, check if they are available under C:DriversIntelPPM.

The CPU speed should change now with the Intel driver missing from the system. If you want to enable it, follow the same steps, and rename the file again.

3] Disable IPPM via Registry or Command Line

Type regedit in the Start search box and hit Enter.

Navigate to:


Close the Registry Editor and restart your computer.

Alternatively, you may execute the following in an elevated command prompt:

sc config intelppm start= disabled

Sc config command modifies the value of a service’s entries in the registry and the Service Control Manager database.

These tips should ensure that the CPU runs at maximum power at all the time.

Why is my CPU running slower than it should?

The causes can be many – May you are using a high-CPU consuming program, your PC is infected with malware, your Power Plan may not be helping the CPU, and so on.

How do I fix low CPU usage and make my CPU run at full speed?

Some basic steps you can carry out are – Restart your computer and see, Update your Windows PC, Full scan your system for malware, reduce startup items, disable Battery Saver Mode, and run Windows in High-Performance Power Mode. If they do not help, the one of the above suggestions will surely help you.

While it is fine to do it on desktops, make sure to use it wisely when using laptops.

You're reading Cpu Is Not Running At Full Speed Or Capacity In Windows 11/10

Full Fix: Windows 10/11 Photo Enhancer Not Working

Full fix: Windows 10/11 Photo Enhancer not working




If you’re dealing with a severe case of enhance your photo not working, your creative flow will get disrupted for sure.

The way we see it, with Windows photos enhance not working, you get more than a disturbance in the force – it is a good opportunity to consider more modern photo editing alternatives.

If you’re not so eager to ditch the built-in tools, you can always run the built-in troubleshooter.

A Windows 10 photos auto enhance missing case can also be an indicator that you’re lacking some important updates and that’s always a path worth exploring.

Windows (Microsoft) Photos would be a great photo-editing app if there weren’t so many bugs.

There are many things going for it, but it seems that, when it comes to stability, this app falls short for many users.

But, it seems that this nifty retouching tool stopped working recently.

If you’re dealing with a severe case of enhance your photo not working, worry not as we prepared a list of available solutions.

At least one of those should help you address the matter at hand, so don’t hesitate to try our fixes to solve the Windows photos enhance not working.

How can I fix Enhance your photo mode issues in Windows 10? 1. Download Adobe Photoshop

If your Photo Enhance is not working in Windows 10, the easiest solution is to use an alternative. The best photo enhancement and editing tool available on the market right now is Adobe Photoshop.

This software tool has a wide range of features and options.

It can be downloaded and installed in just a couple of steps, without the hassle of a complex process with confusing steps.

Photoshop is the first choice of beginners and professionals, mainly because of its plethora of editing tools and ease of use.

A large number of brushes, filters, and photo effects add to the complete experience that Photoshop offers.

Besides that, the customizable workspace with lots of easy-to-use options is another big plus.

Frame tools, slicing tools, magic wand, symmetry mode, white balance, color gamma, and color correction are just some of the many features in Photoshop that can help you enhance your photos.

Adobe Photoshop

If the Photos app is failing, the most cherished photo editing software will definitely enhance your artwork!

Free trialVisit website

2. Run the built-in troubleshooter

Here’s how to run the dedicated troubleshooter and try fixing the Photos app and the Enhance your photo mode:

The first troubleshooting step is the built-in part of Windows 10. Since the Photos app is an integral part of the Windows 10 workflow, there’s the dedicated troubleshooter which deals with app issues.

The idea was for UWP apps to take over, but even the built-in ones, like Photos and Mail & Calendar, fall short. This is where the Store Apps troubleshooter comes into play.

3. Update Windows 10

Here’s the whole route:

The number of times Microsoft changed the Photos app since its inception on Windows 8 can barely count.

Expert tip:

Now you’ll need to apply this to every individual photo. And even that, obviously, won’t function as initially intended. If this was a minor problem, Microsoft might’ve put it under the rug.

However, since there were (and still are) lots of complaints, they had to do something. And, seemingly, they did.

That’s why we encourage you to check for the latest updates. In addition, make your way to Microsoft Store and check for updates there, as well.

4. Reset the app

Here’s how to reset the Photos app in Windows 10:

As you’re probably aware, one can’t uninstall the Photos app. It’s a successor to Windows Photo Viewer and the main competition to Google Photos.

You can, on the other hand, reset the app to factory values. This won’t meddle with your photos, so don’t worry about it.

It’ll just clear all pilled-up cache and, basically, refresh everything as it’s the first time you’re starting the app.

5. Reinstall Windows Photos

Follow these steps to reinstall Windows Photos in Windows 10:

Yes, we said you can’t remove Windows Photos. But that doesn’t exclusively mean the app can’t be reinstalled. Of course, this requires a more complex approach than the previously suggested solution.

In order to reinstall the Windows Photos app (or any built-in app, for that matter), you’ll need to use PowerShell as shown above.

6. Try sticking to local photos only

Here’s how to disable OneDrive for Windows Photos:

You can, without downloading, access all photos stored in OneDrive. However, there are some reports that this causes the slowdowns and additional issues with Windows Photos.

Especially if you’ve changed the default OneDrive locale on your PC or the photos are only online-stored.

Because of that, we recommend unlinking the OneDrive and Windows Photos (if this link isn’t a dire need). You could still access all photos on your local storage.

Also, leave there any other questions or suggestions that you may have.

Was this page helpful?


Start a conversation

Skype Audio Or Microphone Not Working In Windows 11/10

While Windows 11/10 is one of the most loved operating systems today, there are some issues still bothering the users. The internal Skype Microphone issue is one of such common issues faced by Windows 11/10 users.

The microphone of your Windows can stop working due to many different reasons, and some of the very commonly reported reasons are incorrect settings, broken or obsolete drivers, or some hardware issues. If your built-in Microphone or Skype Audio is not working in Windows 11/10/8/7, then this post shows how to fix the Mic.

Skype Audio or Microphone not working

Check if Microphone is ON

Broken or outdated driver

Adjust the Microphone Setting

Restart Windows Audio Service.

1] Check if Microphone is ON

If your microphone is not working after upgrading to Windows 10, probably it is turned OFF.

Select Microphone from the left panel and turn it ON.

You can also choose the apps you want to use on your Microphone.

Also, make surer that Skype has access to the Microphone.

2] Broken or outdated driver

This is one of the most common reasons for any malfunctioning in a PC. Your Microphone won’t work properly if the drivers are broken or outdated. So you need to install or update your device driver.

Run Device Manager and go to “Sound, video and game controllers”.

3] Adjust the Microphone Setting

Select a microphone and double-tap to open the properties.

Here you can adjust the levels and adjustments like Noise Cancellation, DC Offset Cancellation, Echo Cancellation, and more.

Disabling all the sound effects also fixes the Microphone issues sometimes.

Under the Advanced tab, disable the checkbox Allow applications to take exclusive control of this device.

Some minor issues in your Windows Audio Service can also be the reason of microphone bugs and restarting it is the best possible fix. Follow the steps below to restart your Windows Audio Service.

Open Run command and type services.msc. 

This will open the entire list of Windows Services on your PC.

Skype Microphone problems are usually device-oriented. This means, one solution might not work for all. Try the fixes mentioned above and see if they help you, but if your microphone is still not working with Skype, try restarting the Skype app.

This post has some additional tips to fix Skype audio and video problems.

What to do when your mic is plugged in but not working?

If you have followed the above tutorial, and the mic still doesn’t work even though it is connected, then it’s a hardware issue i.e. you should get it to the service center, and get a replacement. If not, then get a new microphone, and set it up again.

Why did my mic suddenly stop working?

If you are using a Bluetooth microphone, then you need to check on the battery level. It is possible that you have been using it for too long, and the battery needs a recharge. If that’s not the case, check if the Bluetooth is not acting up dropping the connection.

Why does my mic cut in and out?

It is usually reported for microphones that use wire to connect to a PC. if your voice is sometimes heard and sometimes it doesn’t, then you need to change the cord. If that is not a problem, make sure to are close enough to the microphone and not moving your head too much that that causes the voice to cut in and out.

Microsoft Store Apps Not Downloading, Installing Or Updating In Windows 11/10

The other day I was trying to install an application on my Windows PC, but it failed. If Windows Store apps or games are not downloading or installing on your Windows 11/10/8 computer here are a few things you could try to make the apps will download or install successfully. This post will even help you if it installs about 50% and then just gets stuck there – with or without an error code being displayed. The error message could be something like:

Something happened and this app couldn’t be installed. Please try again. You own this app but can’t install it on this PC

Windows Store apps not downloading, installing or updating

After hours of research, I found that the solution to the problem was rather simple, and so I thought of sharing it here. There are multiple reasons why this could happen. I’ll list all of them are so that you can try each option and see which one works for you.

Cannot install Apps or Games from Microsoft Store 1] Windows Firewall is disabled 2] Incorrect Date & Time

If you have incorrect Date and Time set on your computer, you’ll have issues installing applications from Windows Store. You may even receive a message:

The time setting on your PC might be incorrect. Go to PC settings, make sure the date, time, and time zone are set correctly, and then try again.

So make sure you have the correct date, time. You can change it from Regional Settings from the Control Panel.

3] Licensing on Microsoft Store is not synced

If the licensing on the Windows Store is not synced properly, you will not be able to install apps on your Windows computer. To manually sync it – Go to Windows Store Settings and Sync Licenses

Now reboot the system and try to download again.

4] Change your Internet connection and see

Change your Internet connection and see. For some strange reason, this has been known to help. So if you are using a cabled broadband connection, use a WiFi and see – or vice versa.

Read: Unable to purchase apps from Microsoft Store.

5] Reset Windows Store cache

You may reset your Microsoft Store cache and then try to download or install the app.

6] Run Windows Troubleshooters

First, we’ll run the native Windows Update Troubleshooter to fix this issue. This has been known to help fix such issues.

After this, you should run the Windows Apps Troubleshooter.

Read: How to use authenticated Proxy Servers to fix Windows Update and Microsoft Store app Installation errors.

7] Reboot the system in Selective Startup or Diagnostic Startup

The next method is to rule out any third-party Firewall or application conflict. To do so you need to reboot the system in Selective Startup or Diagnostic Startup.

To reboot the system in Selective Startup or Clean Boot State.

Press Win + R to open Run and type in MSCONFIG

In General tab select “Selective Startup” and


on “Load Startup items”.

If you’re not sure which is your WiFi adaptor then press Win + R to open Run and type in MSINFO32.

Once it’s complete you can switch it back to “Normal Startup”

Check this if you are Unable to Install Apps from Windows Store.

To reboot the system in Selective Startup or Clean Boot State.

On Desktop press Windows + R. This opens the run window

Type in MSConfig and press Enter

Under General tab uncheck on “Load Startup items.”

Now reboot the system and try to install it again.

Read: Microsoft Store is not opening after reset

8] Check the status of Microsoft Store Install Service

Open the Services Manager and locate the check the status of Microsoft Store Install Service. This service provides infrastructure support for the Microsoft Store. This service is started on demand and if disabled then installations will not function properly.

So you need to ensure that it is not disabled and that Here ensure that its Startup type is set to Manual.

Press the Start button and then see if your issue has been resolved.

9] Do not save encrypted pages to disk

Now try and see.

Once your job is done, remember to reverse the change made here.

10] Reset Windows PC

To Refresh or Reset the PC also referred to as Repair Install, you can follow this article on how to Cloud Reset Windows 11/10.

We have already written a few articles that will help you troubleshoot Windows Store app problems:

Steam Games Not Launching Or Opening On Windows 11/10

Are you unable to launch or open your Steam games on your Windows 11/10? Steam is one of the most popular universal game launchers for Windows PC. It contains most of the free and paid video games that users can download & install and play on their PCs. However, several Steam users have reported that they can’t launch any or some of their installed games via the Steam client. While the Steam app is opening and working properly, the games just won’t load or launch.

This issue could be caused because of various reasons. Here are the potential causes:

This issue might be caused if Steam or the games lack essential permissions to run properly.

If you are trying to open some older games, there might be a compatibility issue which is why the game is not launching.

Outdated Windows OS and graphics drivers can be another reason for the same issue.

A corrupted Download cache on Steam can also trigger this issue at hand.

If there is an interruption by your security suite, the game might not launch.

In case the installation of the Steam app is corrupted or faulty, this issue can occur.

Now, if you are facing the same problem, this post will interest you. We will mention all the working fixes for the “Steam games not launching” problem. You can apply a suitable fix and get rid of the issue.

Before using any of the fixes, make sure your computer meets the minimum system requirements to run the games in question. If your PC is too old to run new Steam games, you will have to upgrade your hardware to be able to launch the games. Also, reboot your computer and then try launching Steam games. It could be some temporary glitch causing the issue at hand. If that doesn’t work, follow the below-mentioned fixes.

Steam Games not launching or opening on Windows 11/10

If your Steam Games are not launching or opening on your Windows 11/10 PC, you can use the below methods to fix the issue:

Launch Steam and the game as an administrator.

Run older games in compatibility mode.

Install pending Windows updates.

Update/ reinstall your graphics driver.

Update DirectX.

Verify all game files.

Delete the Steam Download Game Cache files.

Disable antivirus/ firewall temporarily.

Reinstall the Steam client.

Perform a system restore.

1] Launch Steam and the game as an administrator

The first thing you should do is to run Steam and the game as an administrator. It might be the case that you lack the necessary permissions to launch Steam and your games. And thus, Steam games are not opening or loading on your PC. Hence, if the scenario is applicable, you should be able to fix the issue by launching Steam and the games with admin rights. Here’s how:

Now, select the Properties option from the context menu.

Next, go to the Compatibility tab and check the Run this program as an administrator option.

Repeat the above steps (2), (3), and (4) for the game executable.

Finally, open Steam and then try running the game and see if it opens or not.

If the problem is resolved, do the same for all your Steam games. However, if the issue remains the same, move on to the next potential fix.

Read: Fix Steam needs to be online to update error on Windows PC.

2] Run older games in compatibility mode

If you are trying to run older games that are designed for an earlier version of Windows, you might be dealing with a compatibility issue. So, you can launch them in compatibility mode and see if the issue is fixed. Here’s how you can do that:

Firstly, open File Explorer using Win+E and go to the installation directory of your Steam games.

In the Properties window, move to the Compatibility tab and tick the checkbox called Run this program in compatibility mode for and choose an older version of Windows to run the game.

If running in the compatibility mode works for you, repeat the above steps for all other games.

3] Install pending Windows updates

This issue can be caused if your Windows OS is outdated. Hence, update Windows by downloading and installing all the latest Windows updates. Open Settings, go to Windows Update, and press Check for updates to scan and download pending updates. Then, reboot your computer and see if you are able to launch Steam games or not.

See: Steam Service Error: Steam Service requires some maintenance.

4] Update/ reinstall your graphics driver

If updating doesn’t work, it is quite possible that your graphics driver is corrupted. And thus, your Steam games are not launching. Hence, uninstall your graphics driver and then reinstall it to fix the problem at hand. However, if you still face the same problem, go ahead and apply the next fix.

5] Update DirectX

The next thing you can do to fix the problem is to update DirectX to its latest version. A lot of games require the latest DirectX to run properly. Hence, you should ensure that you have installed the most recent version of DirectX on your PC. If it is missing from your computer, download and install the latest version and then check if the problem is resolved.

Read: FATAL ERROR: Failed to connect with local Steam Client process.

6] Verify all game files

It is quite possible that your game files are corrupted and damaged which is why no Steam game is launching on your PC. This might have happened due to malware or virus present on your PC that infected all your game files. Hence, to counter the problem, you must run an integrity verification check on your game files and fix the broken ones. Steam provides a dedicated feature to do that. Here’s how:

First, open the Steam app and go to LIBRARY.

Now, go to the Local Files tab and press the Verify the Integrity of Game Files button to start verifying and repairing the bad game files.

Finally, when the process is successfully complete, try launching the game and see if the problem is fixed or not.

You can repeat the same procedure for each problematic game. If you still can’t launch Steam games, move on to the next solution.

See: Fix Steam Missing File Privileges error on Windows PC.

7] Delete the Steam Download Game Cache files

The corrupted download cache stored in your Steam app can be one of the reasons that you are unable to launch your games. Hence, if the scenario is applicable, you can delete the Download Game Cache files and then try launching the games. To do that, here are the steps to follow:

You can now try launching your games and see if the problem is resolved.

Read: Fix MISSING DOWNLOADED FILES error on Steam.

8] Disable antivirus/ firewall temporarily

Many antiviruses and firewalls are known to cause issues in the launching or working of various games. Hence, try disabling your antivirus or firewall temporarily and then check if you can launch the games on Steam or not. If yes, the main culprit is your security suite.

Now, we don’t recommend keeping your PC’s security at stake by turning off antivirus protection. Hence, to fix the issue permanently, allow the game through your antivirus and firewall. To add an exception for your games, you can open the main settings of your antivirus and then move to the Exceptions/ Exclusion/ Whitelist settings. After that, add the main excitable of your games to the list and save the new settings.

To allow the game through Windows Firewall, here are the steps to use:

Now, from the right-side panel, tap on the Allow an app through firewall option.

Next, tick the checkboxes associated with your games and enable both the Public and Private networks checkboxes.

Finally, try opening Steam games and see if the problem is fixed.

9] Reinstall the Steam client

If none of the Steam games is opening, there must some corruption with the installation of the Steam client. Hence, the last resort to fix the problem is to uninstall Steam from your PC completely and then install a clean copy of it on your computer. Before uninstalling Steam, it is recommended to create a backup of your games folder and other important data.

Read: Can’t sign into Steam with the correct password.

10] Perform a system restore

There might be some system corruption which is why you can run Steam games on your PC. If the problem just occurred recently after making some changes to your computer, you can perform a system restore to a previous point where you were able to open Steam games. Here’s how you can do that:

Firstly, open the Run command box using Win+R and enter rstrui in the Open box to launch the System Restore window.

Next, choose a restore point and press the Next option.

After that, follow the onscreen instructions and reboot your PC.

Finally, open Steam and try launching your games to check if the problem is resolved.

Hopefully, you will now be able to open Steam games.

Why is Steam not working Windows 11?

If the Steam client is not working on your Windows 11/10 PC, it might be the case that Steam servers are not available or are down at the moment. Besides that, a lack of admin permissions, outdated device drivers, corrupted Steam Cache, overclocked GPU/ CPU, antivirus and firewall interference, and third-party software conflicts can be some other reasons that the Steam app is not working on your PC.

Why is Steam not letting me launch games?

If you are unable to launch games on Steam, the problem might be caused due to faulty and broken game files that are infected by malware or virus. Hence, you should try verifying the integrity of the game files of the problematic games and then launch them. Apart from that, missing administrator privileges, interruption caused by your antivirus/ firewall, outdated device drivers (especially graphics drivers), and compatibility issues can also cause the same issue.

Related read: Fix Steam Friends List not working on Windows PC.

Windows 11/10 Photos App Not Working Or Crashing (Fix)

The Photos app is a useful feature in Windows 10 and Windows 11, but it’s not always reliable. Some users have reported issues with the app, such as it not working, not opening, or crashing randomly. Other problems include displaying blurry images even if they are of high quality.

In this article, we have outlined several solutions that you can use to fix issues with the Photos app in Windows 10 and Windows 11.

Also see: How to Hide Photos on Windows 11 Photos App

How to fix Windows Photos App not working issue

Before diving into specific solutions, it’s important to ensure that your Windows operating system and the Photos app are both up to date. Check for updates through the Windows Update section in the Settings app and update the Photos app from the Microsoft Store. If you have already ensured that your system is updated and you’re still experiencing issues with the Photos app, try the following solutions to resolve the problem.

Sometimes, simply closing the Photos app is not enough to solve the issue. The app’s background process may still be active on your computer. To fully restart the Photos app, you will have to terminate its background process. Here’s how to do it:

In the Settings app, select Apps, then Apps & features from the left pane.

After terminating the process, retry opening the Photos app and see if it works.

If restarting the background process doesn’t resolve the Photos app not working problem, the next step is to reset the app. This should solve most issues regarding the Windows 10 and Windows 11 Photos app.

Restart your computer and try opening the Photos app again. Verify if your issue is resolved. If not, try the next solution.

If the above solutions don’t work, reinstalling the app may help solve the issue. There is no exe installer for the Photos app, so we’ll have to use Windows PowerShell by executing a few commands.

In the Windows PowerShell, enter the following command: Get-AppxPackage Microsoft.Windows.Photos

Look for and copy the entire line of PackageFullName. When you have it copied, enter the following command with the copied Package Full Name: remove-AppxPackage Microsoft.Windows.Photos_2023.18041.15530.0_x64__8wekyb3d8bbwe

Note that the package full name shown here is just an example. You may have a different version of the Photos app’s package full name. Be sure to copy your version of it. Entering this command will uninstall the entire Windows 10 or Windows 11 Photos app.

Restart your computer and see if it resolves your issue with the Windows 10 or Windows 11 Photos app.

Performing a System File Check (SFC) is a built-in Windows utility that scans your system files for corruption and replaces them with a cached copy. The SFC utility helps to ensure the integrity and stability of the Windows operating system by repairing any corrupted or missing system files that may cause issues with applications like the Photos app.

Performing an SFC scan can help to fix issues with the Photos app that may be caused by corrupted system files. This may include issues such as the app not working or crashing. By repairing the corrupted files, the SFC utility may be able to restore the functionality of the Photos app and other Windows components that rely on those system files.

To perform an SFC scan, follow these steps:

In the Command Prompt, enter the following command: sfc /scannow

Wait for the scan to complete. This may take some time.

After the scan is complete, the SFC utility will display a message indicating whether it found any issues and whether it was able to repair them. If it was unable to repair some of the files, you may need to perform additional steps to repair them or consider reinstalling Windows.

Update the detailed information about Cpu Is Not Running At Full Speed Or Capacity In Windows 11/10 on the website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!