You are reading the article Can’t Connect Airpods To Windows? 11 Fixes To Try updated in March 2024 on the website Bellydancehcm.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested April 2024 Can’t Connect Airpods To Windows? 11 Fixes To Try
Windows 11’s recent release has brought along numerous changes and one of them has been how the OS handles Bluetooth profiles in general. This has improved the compatibility with Airpods which now allow you to use your mic and control playback using gestures right out of the box.
Sadly, the connection between the two is as finicky as ever and if you have been facing connection issues on Windows 11, then you are not alone. Here’s all you need to know about fixing the Airpods connection issues on Windows 11.
What has changed for Airpods in Windows 11?
The process of switching, however, is still in the testing phase, to say the least with glitches occurring now and then when you need to switch between profiles the most. A good example of this is how the Airpods are used and show up when making video calls on your PC. In our cases, the buds would switch to Mono Audio for mic use and simply refuse to switch back to Stereo audio. The only fix for this was to reconnect, put the buds back in the case and take them out a few seconds later, or to simply keep using Mono Audio in video calls.
How to fix Airpods connection issues with Windows 11 or 10
1. Connect Airpods again manually
Before we get on to the fixes, we recommend you read more about how you should be reconnecting your Airpods to Windows 11 once you have paired them. As you might have noticed, Airpods now efficiently reconnect to Windows 11 whenever the case is opened, however, this is only until you connect Airpods to another device. Once connected, Airpods will no longer connect with your Windows 11 device even if you have the case open and try to connect manually.
The trick here is that you need to enter pairing mode on your Airpods and then hit ‘Connect’ in the Settings app. Hold down the Setup button at the back of your Airpods with the lid open until you see a flashing white light. This means you have entered the pairing mode and you can now hit ‘Connect’ on your PC.
You won’t have to remove and re-pair Airpods every time on your PC when reconnecting, but you will have to enter pairing mode on Airpods to reconnect. In addition to this, if you do not connect Airpods to another device, then you can simply enjoy an automatic connection when you open the Airpods lid with Bluetooth turned on, on your PC.
2. Re-pair your Airpods
To re-pair your Airpods make sure you have restarted your PC and Bluetooth is turned on, on your PC. Now open the lid of your Airpods case and hold down the ‘Setup’ button at the back until the light starts flashing ‘White’. This means you have entered the pairing mode on your Airpods and you can now use the guide below to pair them with your PC.
Your buds should now be automatically paired and if everything worked as intended, then you should now be able to use Airpods with your Windows 11 PC without any issues.
3. Ensure the correct output and input devices have been selected
Let’s ensure that you have the correct output-input devices selected in Windows 11 when you have your AirPods connected to your PC. This is a simple check, but if you use multiple Bluetooth and Audio output devices with your system then this could be an issue for you.
Similarly, select ‘Airpods’ under your ‘Input’ section if you have multiple Input devices connected to your system. If not, the Airpods mic should be selected by default.
Now launch the Start menu, search for ‘Control Panel’ and launch the same from your search results.
If Airpods were your default device in all these places then you have passed this check and continue with the guide. However, if Airpods weren’t selected as the default device, then we recommend you do the same and try using your Airpods before proceeding with the guide.
4. Ensure that Airpods show up in Devices and printers
Despite Microsoft’s numerous efforts, somehow Devices and Printers remains the Settings page where you can properly manage all your connected devices without any issues. A common issue affecting BT devices in Windows 11 is where the devices will show up as connected in the Settings app but won’t be available on the Devices and Printers page. A restart usually fixes this issue but if your Airpods fail to show up indefinitely, then you could be facing driver or pairing issues. We recommend you use the guide below to check for Airpods.
Launch the Start menu, search for Control Panel, and launch the same from your search results.
Now switch to the ‘Hardware’ tab and check for any conflicting driver. You should see a ‘?’ or a hazard sign beside each conflicting driver.
If you find any such issues then you will have to completely remove Airpods from your system and re-pair your device.
If however, Airpods show up without any driver conflicts then you can use the other fixes in this list to fix your issue. We recommend you try a re-pair nonetheless as it is known to fix most connection issues on Windows 11.
5. Remove hidden entries
We now recommend you remove any hidden entries for Airpods from the Device Manager. This was a known issue in Windows 10 which still seems to exist in Windows 11. Removing hidden entries should help your OS default to the correctly installed device which should help you get everything back up and running on your system again. Use the guide below to get you started.
Press Windows + X on your keyboard and select ‘Device Manager’.
Select ‘Show hidden devices’.
The selected device will now be uninstalled from your system. Repeat the steps above to remove any other greyed-out devices related to Airpods from your PC.
As a precaution, look for other Bluetooth devices and adapters on your PC as well especially if you use external Bluetooth adapters. If you find any then repeat the steps above for any Airpods related devices installed on your PC.
Once removed, restart your system for good measure. You can now try using/reconnecting Airpods again and they should work as intended without any issues.
6. Remove device completely
If removing hidden entries did not work for you or if you did not find any hidden entries for Airpods, then we now recommend you completely remove and re-pair Airpods on Windows 11. Use the guide below to get you started.
6.1 Remove from Devices and Printers
Launch the Start menu, search for Control Panel and launch the same from your search results.
Airpods will now be removed from your device. We now recommend you remove all subsequent Airpods entries from the Device Manager using the guide below.
6.2 Remove from Device Manager
Let’s remove Airpods from Device Manager on your system. Use the guide below to get you started.
Press Windows + X on your keyboard and select ‘Device Manager’.
Select ‘Show hidden devices’.
Audio inputs and outputs
Sound, Video and Game controllers
Xbox 360 Peripherals
Once removed we recommend you move to the next step and restart your PC.
6.3 Restart your PC
At this point we recommend you restart your PC. This will help remove any cached drivers, refresh and restart BT services as well as clean up all the necessary data from Airpods stored on your PC. Once you have restarted your PC, you can re-pair Airpods using the guide below.
Bluetooth exploits are quite common nowadays and apple releases multiple firmware updates for all their devices regularly as well. This means that you might be facing a driver and firmware conflict where the current firmware of your Airpods is incompatible with your older Bluetooth driver version.
8. Disable Wireless iAP service
Wireless iAP service allows you to use Voice Commands and speech recognition with Windows 11. However, this uses large amounts of bandwidth and is a known cause of connection issues on Windows 11. If you do not use Voice Commands with your PC then we highly recommend that you disable the Wireless iAP service using the guide below.
Launch the Start menu and search for the Control Panel to get you started.
Select ‘Airpods’ and hit Alt + Enter on your keyboard.
Disable ‘Wireless iAP’ service by unchecking the same.
9. Disable Remote Control
Windows 11 now has native playback support for all Airpods gestures and this is great news. In our initial testing, we were able to control playback in all popular web apps for media consumption like YouTube, Twitch, Discord, and more. The controls also worked well with native apps for Spotify, Apple Music, Deezer, and more. However, these playback controls run a Remote connection service that causes connection issues on Windows 11 especially if you own Airpods (Gen 1) or Airpods (Gen 2). Use the guide below to disable these services and fix connection issues on your system.
Note: Needless to say, you will lose out on the ability to use playback gestures with Windows 11.
Launch the Start menu, search for ‘Control Panel’, and launch the same from your Search Results.
Now select Airpods and hit Alt + Enter on your keyboard.
Now uncheck the boxes for the following services.
Remotely Controllable Device
We now recommend you restart your PC just to be safe and test your Airpods again. If everything went correctly, then you should no longer face connection issues with Airpods on your Windows 11 PC.
11. Disable Telephony Service (if you want Audio Output only)
Launch the Start menu, search for ‘Control Panel’ and launch the same from your Search results.
Uncheck the box for ‘Handsfree Telephony’.
The audio should now automatically switch and start using the Stereo audio which should help you get high-quality audio when using Airpods.
12. Disable Absolute Volume
If you are facing low-volume issues or intermittent connection when using Airpods, then we recommend you disable Absolute Volume for BT devices on your system. This setting helps with proper control of the volume for BT audio devices remotely on modern devices but it causes issues with certain unique devices that use different or older protocols much like the Airpods. Disabling Absolute Volume should help solve connection and volume issues on your system. Here’s how you can disable it on your system.
Press Windows + R on your keyboard, type in the following, and hit Enter.
Locate the following location in the registry editor. You can also copy-paste the path given below in your address bar at the top.
Set the ‘Value data’ as ‘1’.
Absolute Volume is now disabled on your system and we now recommend you restart your system at the earliest. You can then re-pair Airpods with Windows 11 and you should no longer face connection issues on your system.
2. Reset your Airpods
This can be inconvenient as you will have to re-pair your Airpods with every device you own however, this is a known fix for most issues that you might be having with Audio or Connection on Windows. Resetting your Airpods will allow you to start afresh and pairing them first with Windows should help get everything working as intended. Use the guide below to reset your pair and then connect it to Windows using the guide above.
Note: Make sure you remove Airpods from your PC as a device. We recommend you use the guides in this post to remove it from the Control Panel first and then subsequently from the Device Manager (if it shows up).
Resetting Airpods is a fairly simple process, place your Airpods in the case and leave it alone for a few minutes. Now come back, open the lid and hold down the Setup button at the back of your Airpods for around 15 seconds. You should then see the light flash Amber and then white. Now close the lid, enter pairing mode and try connecting them to your Windows 11 PC as a fresh device. If everything goes correctly, you should have audio and connection working on your device. You can now use the guide above to configure your Airpods as intended.
If you’re still facing Connection issues with Airpods then it’s time we try some troubleshooting. We first recommend you perform the checks below to ensure that everything has been set up properly on your system.
Note: We recommend you have your Airpods connected and paired to your PC to perform these troubleshooting fixes as intended.
Facing issues in Video calls? Here’s all you need to know
This is quite finicky and depends on your BT driver version and whether you are using Windows 11 or Windows 10. If you are using Windows 10 then Airpods will show up as two different devices, one called ‘Airpods hands-free’ and the other called ‘Airpods stereo’. If you have the latest PC compatible with Windows 11 running the same, then in most cases Airpods will now show up as one device with smart switching already enabled. However, if you have an older BT adapter or older BT drivers then it will indeed show up as two devices on your system as well.
The trick here is to select ‘Airpods hands-free calling’ when trying to use Airpods in video conferencing apps if you have two devices. If you have one, then you re-enable the Telephony service if you had disabled it earlier. Subsequently, you will have to increase your Mic levels to get manageable audio quality on your system. We tested the following video conferencing apps with Airpods (Gen 1) and here’s how the experience went.
We tested Google Meet first where Airpods showed up as three different devices, for both audio and video. Selecting either did absolutely nothing. The audio output and input defaulted to the right earbud and no amount of tinkering got either the input or output to switch over.
We then tested Microsoft Teams and things were similarly disappointing. Teams does a great job of automatically switching between stereo and mono audio on its own when you speak or listen, that is until it doesn’t happen too often. The mic then simply stops working and toggling the Mute button does seem to fix this after the first or second try. In the worst cases, you will have to put the buds back in the case, wait a few seconds, and wear them again to get everything working. This doesn’t sound bad, but if you’re having to do this every 10 minutes then the Airpods aren’t simply worth using. It would be better to have a single bud that works flawlessly than having two buds that rarely work. We’re sure that this is fairly new and Microsoft is looking to improve this over time.
You're reading Can’t Connect Airpods To Windows? 11 Fixes To Try
If you use Microsoft Excel frequently, you might have run into the error where you can’t type anything into an Excel sheet. Luckily, this is a pretty common problem—alongside other Excel responsiveness issues—and there are several ways to solve the issue.
If you’re wondering, “Why can’t I type in Excel?” We’ve got six fixes to try.
Table of Contents1. Enable Editing
Next to this, there’s a gray button marked “
You should then find you’re able to type in text and save the sheet with your changes.2. Unprotect Your Sheet or Workbook
It might be that the sheet or workbook you’re trying to type in is protected. If this is the case, Excel won’t let you type any data into the sheet and will display a message letting you know. It’s easy to unprotect a sheet or workbook so you can enter data, although if the sheet or workbook is password protected, you’ll need the password from whoever created it.
If the sheet or workbook you’re trying to type in is protected, you should see options to
To enter text into a protected sheet or workbook, just select
You should now be able to enter text into the sheet or workbook and save your changes.3. Disable NumLock
It might sound obvious, but are you trying to type numbers into an Excel sheet or workbook using the separate numeric keypad on the right side of your keyboard? If this is the case and you can’t enter any numbers, it might be that NumLock is on.
Here’s how to disable it.
Look for the
on your keyboard. Some keys will have an LED that illuminates to show NumLock is on.
Press the NumLock key to turn NumLock off (or on).
Note: Many modern keyboards don’t have a separate numeric keypad, therefore won’t have a NumLock key.4. Clear Data Validation Rules
Data validation rules can restrict what values users can input — for example, you can provide a range of specified values, such as whole numbers from 0 to 100. If you try to type in any other value, this will result in an error message.
There are two options here: Either you can stick to the data validation restrictions or contact the sheet creator if you’re not sure what input value is required. Or you can remove the data validation restrictions. Here’s how to do that.
Select the cells where the data validation restrictions are applied.
You should now be able to enter any value into cells.5. Disable Add-Ins
If you’ve recently installed new add-ins in Excel, this could be the reason you can’t type in Excel. By launching Excel in safe mode, you can figure out if an add-in is causing this problem. Launching Excel in safe mode is also a good solution if Excel is not responding.
How to launch Excel in Safe Mode
Here’s how to launch Excel in safe mode.
Close your current Excel document — make sure to save any changes first.
Press the Windows Key + R.
In the Run box, type
into the Open field.
Excel will launch in safe mode.
Try typing into the sheet to see if the issue is fixed.
Still can’t type in Excel? Now you know that an add-in is causing the problem, the only question is, how do you know which add-in is the culprit?
First, you’ll need to identify which add-in is the problem, then remove it. Here’s how to do that.
Open Excel and go to the
At the bottom next to
choose COM Add-Ins from the drop-down menu.
A list of installed add-ins should appear.
Check the box for one add-in and leave the others unchecked.
Try typing into your sheet. If you’re able to type, you know this add-in wasn’t the problematic one.
Repeat steps 1 through 9 to identify which add-in is causing the problem.
Restart Excel and try typing — hopefully, you now shouldn’t have any issues entering text.6. Adjust Editing Options
Go to the
dialog box, select
, ensure the
Allow Editing Directly in Cells
box is checked.
You should now be able to type into any cell to edit formulae.
As you can see, there are a number of things that could be causing the issue if you can’t type in Excel. Luckily, there are also a number of quick and easy fixes to try if you’re experiencing this problem, so you should be up and running again in no time.
Several issues come up on Windows 11/10 computers, and one of the most frustrating ones is that Windows can’t connect to this network error. This error appears with no obvious indication of what’s causing it or how to fix it, making it tough to debug for many people. And we all know how vital our computer’s network connection is. So, if you’ve tried connecting your Windows PC to the network but it’s not working, we’ve got you covered. Most of the time, the cause of this problem can be traced to a few factors, which we’ll go over in this post, along with the best ways to fix Windows that can’t connect to this network error. Do stick with us to the end.What should you know about Windows can’t connect to this network error?
However, using the approaches we’ll discuss in this article, it’s still something that can be fixed. But, before we get into that, here are the most likely causes of the error:
Wrong Network Configuration
Modem/Router issuesFix Windows can’t connect to this network
If you keep getting the Can’t connect to this network error whenever you try to access the internet on your computer, the first thing you should do is restart the computer as well as the router/modem and then try connecting to the network again. This can help you determine whether the problem is a minor one or one that will necessitate some computer tweaking to be resolved. If it doesn’t solve the problem, move these fixes.
Update Windows/Uninstall Windows Update
Run Network Troubleshooter
Change Network Adapter Settings
Update Network Driver
Make sure your network source is near
Make sure WiFi physical switch is on
Flush DNS and Reset IP
Now, let’s dive into discussing the fixes in full detail.1. Update Windows Windows 11
Press Windows + I keys to open Settings.
Select Windows Updates.
If there are any updates available, install them and try connecting your internet once again.Windows 10
Open Settings on your computer.
Check for any available updates and install them.
If conflicting updates on your machine cause the issue, this should help you resolve it. Furthermore, if your computer’s network adapter isn’t compatible with the most recent Windows update, and you probably recently updated your computer before the problem appeared, you may need to remove Windows Update to resolve the Windows can’t connect to this network issue.
Read: PC won’t connect to internet but other devices will2. Run Network Troubleshooter
The Windows Network troubleshooter can be used to resolve general network issues. This operation will assist you in identifying the issue and guiding you on how to fix it.
In Windows 11/10 you can access the built-in Troubleshooters via the Settings Troubleshooters page. You can also run the Troubleshooters from the command line. Now as far as troubleshooters to fix Network-related issues are concerned, they are as follows:
Shared Folders Troubleshooter
Network Adapter Troubleshooter
Internet Connections Troubleshooter
Incoming Connections Troubleshooter
Connection to Workplace using DirectAccess Troubleshooter.
However, the troubleshooter may not be able to identify all problems, which is why we’ve compiled the additional solutions we’ve discussed to assist you.
Fix: Network & Internet connection problems in Windows3. Change Network Adapter Settings
Making a little tweak to the network adapter setting could help in fixing Windows can’t connect to this network, and here is how:
Open Settings on your computer.
Select Network and Internet.
Hit Configure… and switch to the Advanced tab.
Select 801.11d from the Property list and change the value to Enabled.
Fix: No internet, Secured error in Windows 11/104. Upgrade Network Driver
Drivers are the software that allows your computer to communicate with any connected devices – so you need to update your Network Drivers. Thus, if your network adapter is malfunctioning, you will undoubtedly encounter difficulties when attempting to connect to a network, and this could be the source of your computer’s problem.
To update Network drivers in Windows 11/10, you have the following methods:
Using Windows Optional Update
Download from official website
Use driver update software
Using Device Manager
This issue does not identify the root of the problem, but we must try out the various solutions, and one of the first things you should do is check out:
If you visit your manufacturer’s site to check for and download the latest driver, after downloading the file, do this:
Open Device Manager.
Hit Update driver and choose to select the driver from your file.
Follow other on-screen instructions to finish the process.
After doing all these, restart your computer and try reconnecting with your network. If the issue started just after you’ve updated your network driver, then you should roll back the driver to the prior one.
Fix: Limited Network Connectivity message.5. Make sure your network source is near
If you’re using a router to connect to the internet, you’ll need to place it as close to your computer as possible to establish a connection. Some people install their router far away from where they use their computer, which could be the source of your network problem. As a result, aim to locate your internet source as close as possible to where you will be utilizing it. Some basic suggestions can help increase WiFi Speed Signal strength and coverage area.6. Forget Network
Windows computers store the WiFi profiles they’ve once connected with and forgetting some of these networks can help fix the issue you are facing while trying to connect to the internet if conflicting networks cause the problem.
Fix: Windows Connectivity issues with Hotspots and Wi-Fi adapters.7. Make sure WiFi physical switch is on
Some PCs come with a physical WiFi switch, and if this isn’t on, you won’t be able to connect to the internet with WiFi. If you are using this kind of computer, try to toggle on the switch before joining your WiFi
Read: WiFi connected, but no internet access.8. Flush DNS and reset IP
Corrupt DNS caches may also be the reason behind the inability to connect to the internet on your computer. This can, however, be fixed by releasing TCP/IP, flushing DNS, resetting Winsock, and resetting Proxy. So you can try making use of this method to fix the network issue on your computer by
You can then try connecting your network again and see if the issue has been fixed or not. If not, try the next solution.9. Disable IPv6
The IPv6 isn’t always needed on PCs, and disabling it can help resolve the network issue you are getting when trying to connect your computer. So, to disable IPv6, do this:
Navigate to Internet Protocol Version 6 and uncheck the box.
Select OK to save the changes and restart your computer afterward.10. Reset Network
Another effective way to fix network issues in Windows computers is to reset the network. Simply follow the link to perform the troubleshooting and try reconnecting to your internet source.Why does my computer keep saying I can’t connect to this network?
The Windows can’t connect to this network problem is usually caused by network adapter issues, and your computer may need to have its adapter settings tweaked or its drivers updated. However, a malfunctioning internet source could be the source of the problem, which can be confirmed by testing the router/modem with another device. It is the former if it works; if it does not, you should try another internet provider.Does running a Network troubleshooter fix Windows can’t connect to this network?
Sometimes despite having the correct server address, you may have a problem connecting to the Minecraft server.
The problem can be related to your System Settings and network.
So, if you can’t connect to a Minecraft server, follow this article to know the solutions to fix the problem.
Also read this article on what to do when Minecraft is unable to connect to world.
You need a stable network connection to connect to the Minecraft servers.
So, check that you are having a stable internet connection.
Restart your PC and the router when you are having connectivity issues.
Often a fresh restart can fix the problem and help you to access the Minecraft server.
So, turn off the PC and the router and disconnect them from the power sources.
Allow a few minutes before reconnecting the PC and the router. Turn on your PC and the router. Then relaunch Minecraft and check if you can connect to the servers now.
Due to the Minecraft server outage, you can also have difficulty connecting to the servers.
If the Minecraft server is down, then wait till everything becomes alright. If the services are running fine, then move on to the next solution.
If you are playing Minecraft’s Java edition, then refresh the Minecraft server.
Also check the status of your console’s network, if you are playing on a gaming console:
There are similar other websites to check the gaming console network.
If the server is down then you should wait for some time till the problem is fixed. If you still cannot connect to the Minecraft server, go to the next step.
You can also sign out of the Minecraft account and then sign in back, This can often fix temporary glitches.
So, just give it a try, If the problem persists, then flush DNS.
If you cannot connect to Minecraft server with IP then flush DNS.
This will clean all the DNS records from the cache. Sometimes due to a corrupted cache, you may get connectivity issues. So, by flushing DNS you can fix the problem.
To flush DNS, follow the steps given below:
Copy & paste the following commands in the elevated Command Prompt window one by one and press Enter.
netsh int ip reset
netsh winsock reset
After running the above commands open Minecraft and check if this has fixed the problem, else go to the next step.
Sometimes the DNS server is misconfigured, and this can be the reason why you failed to connect to the server.
So, change the DNS address and this can fix the problem. Now follow the steps to change DNS and renew IP:
Press Win + I to open Settings. Select Network & Internet option.
Select Advanced Network settings and choose Network Connection. Open its Properties.
If your network drivers are outdated then also you will have a problem connecting to the Minecraft server.
So, update the network drivers and after this, you should be able to reestablish a connection with the Minecraft servers.
Windows Firewall can interfere with Minecraft and prevent you from connecting to the game servers.
So, tweak the rules for Minecraft in the Windows Defender Firewall and solve the problem.
To do so, close all the Minecraft processes using Task Manager.
Select the End Task option. Make sure to repeat the process if there are other running Minecraft processes.
Enter Windows Defender Firewall Advanced Security in the Windows Search box and select the first option.
Select Inbound Rules from the left panel.
From the installation folder, search for the JRE-x64 folder. Then open the Bin folder.
Check all the three Private, Domain, and Public boxes in the Profile folder.
Name the rule and repeat the same steps for the chúng tôi file.
Create the same rules in the Outbound Rules.
Check all the Profiles there and then select Next. Name the rule and complete the process.
You should now be able to connect to the Minecraft servers.
Here are some frequently asked questions when gamers cannot connect to the Minecraft servers.
Why does Minecraft say can’t connect to the server?
Minecraft cannot connect to the servers mainly due to unstable network, outdated network drivers, server outage, Firewall interference, etc.
How do I fix cannot connect to the server?
Restart your device, check the gaming console’s network, check your PC’s network, flush DNS, change DNS, tweak the Firewall settings.
Why can’t I play Minecraft with my friends?
Set Minecraft world to allow multiplayer, check the servers and check your network when you cannot play Minecraft with your friends.
After performing the above steps, you should be able to connect to the Minecraft servers.
Feel free to ask us any game or tech-related questions and we will revert with solutions.
Several factors cause an application to keep stopping or crashing in Android. The problem could be corrupt cache files, poor memory management, low storage space, software bugs, device incompatibility, etc. Poor or unstable internet connection and server downtime could also trigger the “App keeps crashing” error message.
Given the diverse nature of the causative factors, you may have to try multiple troubleshooting steps to fix the problem. This tutorial covers possible ways to stabilize a crashing app on Android devices.
Table of Contents1. Force Stop the App
An Android app might keep stopping if it cannot complete a task or operation. Most times, force-stopping and reopening the app can set things back in order.
Long-press the app’s icon on the home page and tap App info or the info (ℹ) icon.
Tap Force Stop and select OK on the confirmation prompt.
Reopen the app and check if it runs without crashing. If the app keeps stopping, force-close the app again, force-close other applications, and reopen the app.2. Clear the App’s Cache and Storage Data
Over-accumulation of temporary files can also cause an app to keep crashing. Delete the app’s cache file and check if that stabilizes its performance. Otherwise, clear the app’s storage data and try again.
Select Storage & cache and tap the Clear Cache button.
Launch and use the app for a few minutes. If the problem persists, delete the app’s storage data and try again.
Return to the app’s “Storage & cache” page (see step #3 & #4) and select Clear Storage. Select OK on the confirmation prompt to proceed.3. Update Android System Webview
A buggy version of the Android System Webview once caused apps to crash unexpectedly on Android devices. Google has since released a stable version of the system component that fixed the app crash issue.
Although Google automatically installed the stable version on affected devices, the company also recommends updating Android System Webview manually.
Check the Android System Webview page in Play Store (open Play Store and search for “Android System Webview”) and tap the Update button.4. Update the App
An app might exhibit different forms of malfunction if it’s outdated, poorly developed, or filled with software bugs. App developers work round-the-clock to fix bugs and other issues, so update the app if there’s a new version available.
Force-close the app and follow the steps below.
Go to the application’s detail page and expand the “Advanced” drop-down option.
Scroll to the “Store” section and select App details.
That’ll launch the Play Store app and redirect you to the app’s page.
Tap Update and reopen the app when the update is complete.
Alternatively, open Play Store, type the app’s name in the search bar, select the app, and tap the Update button. If the app isn’t available on the Play Store, download and install the latest version of the app from safe and reputable APK websites.5. Check the App’s Permission Settings
Apps may keep crashing if it doesn’t have permission to use some crucial device components (storage, camera, microphone, location, etc.). Go through the app’s settings and ensure it has access to the necessary permissions.
Select any crucial permissions in the “Denied” section and change the access status to Allow.
Note that you don’t have to grant the app all permissions on the page. There are some permissions you should never accept. Read our compilation of 30 app permissions to avoid on Android for more details.6. Check Your Internet Connection
Network-related problems are sometimes responsible for app instability on Android devices, especially if the app requires an uninterrupted internet connection. Or if the app is unable to establish communication with the required servers.
Try using other applications and check if they have internet access. Otherwise, put your phone in and out of airplane mode to refresh your cellular connection. If you’re using a Wi-Fi connection, restart your router and try again. Reset the router or contact your internet provider if the problem continues.7. Restart Your Phone
Shut down your phone and power it back on if the app keeps stopping or crashing despite these troubleshooting steps. Performing a soft reset will free up your device’s RAM, terminate unneeded background apps/processes, and fix minor system errors causing apps to malfunction.
Press and hold your phone’s power or lock button and select Restart on the power menu.
When your device comes back on, open the affected app before any other app. If the app keeps stopping, contact the developer to report the problem.8. Reinstall the App
Uninstall the app from your smartphone or tablet if it keeps freezing, stopping, or crashing. The steps to uninstall an app will vary based on the model of your smartphone and Android OS version.
Press and hold the app icon on the Home Screen or app launcher and drag the icon to the Uninstall section in the top-right corner of the screen and select OK on the confirmation prompt.
Reinstall the app from the Play Store or use its APK file and check if it works without any issues. If the app keeps stopping, restart your phone and check again.9. Downgrade the App
If an app begins to crash after an update, that could be because the new version is incompatible with your device’s hardware or operating system. It’s also possible that the update contains some bugs. Sideload the older/stable version of the app instead. There’s no built-in technique to downgrade an app in Android. You’ll have to manually download and install the APK file of the older version.10. Free Up Storage
Your smartphone and some apps may malfunction if it’s running low on storage space. Check your phone’s storage management interface and free up some space if it’s running low on storage.
If your device runs the stock Android OS, use the Google Files app to remove duplicate files, old pictures, unused apps, and other large files consuming storage space. Transferring files to an external SD card is another way to free up internal storage space in Android.11. Update or Downgrade Android
There could be a problem with your device’s operating system if all applications crash when you open them. Check your device’s update section and install any update available for your smartphone.
Downgrade your Android OS version if the app keeps crashing after an OS update.Contact the App Developer
Your phone is up-to-date, other applications are working correctly, internet connectivity is up-and-running, there’s enough memory and storage to go round, but one particular app keeps stopping. What do you do? Contact the app developer if you’ve tried all the troubleshooting steps listed above.
Open the app’s details page in the Play Store, expand the “Developer’s contact” section, and send a report to the email address or phone number on the page. Contact Google Play Help if the affected app is a Google app.
For the most part, macOS is a well-behaved operating system that rarely experiences irritating day-to-day glitches, but now and then, you may find that your volume controls or even your sound output as a whole aren’t working correctly.
There are several reasons why this may happen. We’ll walk you through both rare and common Mac sound issues to help you fix the problem.
Table of Contents1. Check The Mute Button!
If you’re using an Apple keyboard, then the F10 key doubles as the audio mute toggle. It’s far too easy to accidentally tap this button, or have your cat “accidentally” step on it when you aren’t looking. So give the F10 key a press to see if it unmutes your sound.2. Restart Your Mac
One of the first things you should try is restarting your Mac. In our experience, a simple reboot resolves most sound glitches in macOS. Just ensure all of your audio equipment is connected before restarting the computer. Sometimes connecting audio devices after the computer has already started is the cause of the issue. So hook it all up before you see the Apple logo.3. Check Your Hardware
Sometimes the problem is that you’ve simply hooked something up incorrectly. Make sure that you haven’t, for example, plugged your speakers into an input instead of an output. If you’re using a Bluetooth audio device, try resetting it to factory defaults and pairing it with your Mac again.
Here are some general things to check:
Make sure that your Mac speakers or headphones are properly plugged in.
Check your speakers’ or headphones’ audio output volume slider to ensure they are turned up.
Check the volume slider on your Mac to ensure that the volume level is turned up and the mute button is not enabled.
If you are using external speakers or headphones, try using the internal speakers (for MacBooks or iMacs or other Macs with built-in speakers) to see if the issue is with the external device.
Check for any visible damage to the headphone jack or audio port on your Mac and the speakers or headphones themselves.
If you suspect any specific piece of gear is to blame, try it with another device if possible to eliminate it as a suspect.4. Check Your Sound Settings
With your physical hardware inspected and in working order, the next troubleshooting step is ensuring your sound settings are correct.
To check your sound settings on a Mac, follow these steps:
System Preferences/Settings window
, make sure that the
is selected as the output device. For example, you may have an HDMI device without speakers selected.
, make sure that the
is selected as the input device.
Sound Effects tab
, make sure that the
Play sound effects through
option is set to the correct device.
Also, be sure to check that the volume slider isn’t muted.
If everything here looks correct, it’s time to move on to more sophisticated fixes.5. Reset the NVRAM (Intel Macs) or PRAM (Apple Silicon Macs)
NVRAM (Non-Volatile Random-Access Memory) or PRAM (Parameter RAM) are types of memory that store certain settings and information that your Mac uses to access certain features. If you’re experiencing an issue with volume or sound on your Mac, you may want to try resetting them, as this can sometimes help to resolve the issue.
Check out How To Reset PRAM & SMC On Your Mac for more information on how to perform the reset.6. Check for Software Updates
If volume or sound is not working on your Mac, checking for any available software updates is a good idea. Outdated software can sometimes cause issues, and installing the latest version of macOS can help to resolve these issues.
If no updates are available or the issue persists after updating, try the next fix on the list. You can also use the terminal to perform updates manually.7. Try a Different User Account
If volume or sound is not working on your Mac, you may want to try logging in to a different user account to see if the issue persists. This can help to determine if the issue is specific to your user account or if it is a system-wide issue.
If the issue does not persist when logged in to a different user account, it is likely that the issue is specific to your user account and can be resolved by deleting or troubleshooting your account settings. If the issue persists when logged in to a different user account, it’s probably a system-wide issue requiring further troubleshooting.8. Repair Disk Permissions
If you’re experiencing an issue with volume or sound on your Mac, you may want to try repairing the disk permissions on your Mac. Disk permissions are a set of rules that determine which users and processes are allowed to access certain files and folders on your Mac. If the permissions are incorrect, it can cause issues with your Mac.
To learn how to repair disk permissions, check out How to Fix or Repair Disk Permissions in macOS.9. Try Safe Mode
You may want to try starting your Mac in Safe Mode. Safe Mode is a special boot mode that allows you to troubleshoot and fix issues with your Mac by starting up with a minimal set of drivers and programs.
For instructions on how to boot into Safe Mode in macOS, check out How to Boot Up and Use a Mac in Safe Mode
If the issue goes away in Safe Mode, it’s a good bet that the problem is with a third-party application, not macOS.10. Check for Third-Party Software Conflicts
If the problem isn’t present in Safe Mode, it’s a good idea to check for any conflicts with third-party software that you have installed. Third-party software can sometimes interfere with the normal functioning of your Mac and cause issues like this.
If the problem is present right from the moment you boot up your Mac, it’s likely one of your startup programs. Check out How to Enable or Disable Startup Programs on macOS to see how you can selectively disable programs until you find the one causing the issue.11. Reset the System Management Controller (SMC)
The System Management Controller (SMC) is a chip in your Mac that controls power to certain hardware components. If you’re experiencing an issue with volume or sound on your Mac, you may want to try resetting the SMC, as this can sometimes help to resolve the issue.
Check out How To Reset PRAM & SMC On Your Mac for more information on how to perform the reset. If the issue persists after resetting the SMC, you may want to consider looking for further assistance from a technical support specialist.Further Troubleshooting Steps
The above fixes represent the most straightforward troubleshooting path for this particular problem, but if you still don’t have working sound, there are a few miscellaneous things you can try,
The Apple Hardware Diagnostic
Check for any hardware issues by running Apple Hardware Test or Apple Diagnostics. To do this, shut down your Mac and press the power button to turn it back on. Immediately press and hold the D key on your keyboard. Release the key when you see the login window. Apple Hardware Test or Apple Diagnostics will start automatically. Follow the prompts to complete the test.
On Apple Silicon Macs, the new method is to press and hold the power button from a power off state until you see a list of start options. Then press Command + D to start the diagnostic tool.
Using Disk Utility To Check for Errors and Corruption
Check for any corrupt system files by running a Safe Boot and using Disk Utility to repair the hard drive. To do this, start your Mac in Safe Mode and then run Disk Utility as described above.Thunderbolt and USB Audio Devices
If you’re using a Thunderbolt or USB audio device, try unplugging it and then plugging it back in to see if this resolves the issue.Malware and Viruses
If you suspect that malware may be causing the issue, you may want to try running a malware scan on your Mac using an antivirus program.Restarting Core Audio
If you’re experiencing an issue with coreaudiod, the core audio process that handles the sound controller, you may want to try restarting the process.
You can restart the Core Audio component by pasting the command below in Terminal and pressing Enter.
sudo killall coreaudiod
Update the detailed information about Can’t Connect Airpods To Windows? 11 Fixes To Try on the Bellydancehcm.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!