You are reading the article Apple Keyboard Light Blinking Twice And Won’t Reconnect To Mac? Here’s The Fix updated in December 2023 on the website Bellydancehcm.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested January 2024 Apple Keyboard Light Blinking Twice And Won’t Reconnect To Mac? Here’s The Fix
The Apple Keyboard light blinks twice when the keyboard is ready to be paired via Bluetooth with a Mac or another device, indicating it is ready to be setup. In other words, if you just got a brand new Apple Keyboard then the light will blink when turned on, and you need to pair it to a Mac before it will work. But that’s not our focus here, this article is for troubleshooting the rare situation where the Apple Keyboard indicator light will randomly start blinking twice after disconnecting from the computer for no obvious reason, typically met with the MacOS Bluetooth preference panel reporting errors like “Not Connected”, “Couldn’t connect to the device”, and “Pairing failed”.
If you run into the blinking keyboard light problem seemingly out of nowhere on an Apple Keyboard that has already been paired with the Mac before, or after a Mac has been asleep and then woken up, you can typically fix the blinking keyboard light problem with a relatively simple troubleshooting approach.
Before beginning, be sure the Apple keyboard batteries are sufficiently charged. If the battery charge is too low or zero, the Bluetooth connection will not sustain itself or even initiate at all. In fact if the keyboard is disconnecting seemingly at random, it’s likely because of battery. This article does not aim to be another general Bluetooth device disconnection troubleshooting guide however, and instead is focused specifically on the twice-blinking light on Apple Keyboards after they have already been setup before.
The blinking Apple Keyboard light looks like the following, the light is at the top of an Apple Keyboard and will blink twice, then briefly stop, then blink twice again, repeating until the keyboard is either paired or turned off:Wait! Is the Apple Keyboard new? Did you Setup & Pair the Bluetooth Keyboard and Mac Yet?
The reason the Apple Keyboard light blinks twice is to indicate it needs to be setup and paired to the Mac. Typically this only happens when the the Apple Keyboard is brand new or being setup with a new Mac.
Remember, the guide here is aimed at users who experience the blinking light keyboard issue at random on a Mac that was already configured to use the paired keyboard.How to Fix Blinking Apple Keyboard Light on a Mac
Try this simple approach first to resolve the blinking keyboard light issue:
Turn the Apple Keyboard off (hold the power button for a few moments)
Pull down the APPLE menu and choose “System Preferences” then go to the “Bluetooth” preference panel
Now go back to the Apple menu and choose “Restart”
Turn the Apple Keyboard ON again by pressing the power button
Wait a moment and the Apple Keyboard should appear within the “Devices” list of the Bluetooth preference panel and re-sync
That should fix it, but if the Apple Keyboard is still not working you may need to go a step further and remove the paired keyboard from the Mac, then reboot and pair the keyboard yet again. Those steps are covered next.Is the Apple Keyboard Blinking Twice Still? Try Removing & Re-Pairing Apple Keyboard to the Mac
If the above trick fails to resume keyboard functionality for whatever reason, you can remove and then re-pair the Apple Keyboard to the Mac:
Select “Apple Keyboard” and then hit the Delete key on the keyboard and confirm you want to remove the Bluetooth device
Restart the Mac
Upon a successful reboot, return to the Bluetooth system preference panel
Turn on the Apple Keyboard by pressing the Power button to trigger the pairing process again
Choose “Pair” when Apple Keyboard reappears in the Bluetooth Devices list
Enter the numbers shown on screen via the connected Apple Keyboard to pair the keyboard to the Mac
The removal and pair again approach works every time that I personally have run into this issue on my Apple Keyboard, but since it’s slightly more cumbersome than the first approach, which often works too, it’s included as secondary troubleshooting tip.
The above steps should do the trick. If for whatever reason you continue to have difficulty with Bluetooth keyboard, you might want to reset the Bluetooth module on a Mac and start over. That should really not be necessary for the vast majority of Bluetooth troubles however, and usually just confirming the battery is sufficient and then pairing a device again is sufficient to remedy a Bluetooth connection problem.
By the way if you find yourself struggling with this issue with Bluetooth peripherals, you may find it useful to learn how to enable Bluetooth on a Mac without a keyboard or mouse. Note if you ever see the “Bluetooth not available” error on a Mac then you have a separate issue that is typically resolved with a hardware SMC reset and the forced creation of new Bluetooth preferences.
You're reading Apple Keyboard Light Blinking Twice And Won’t Reconnect To Mac? Here’s The Fix
The Black Heart Symbol Alt code is 3.
This alt code works anywhere on the Windows PC including MS Word, Excel, PowerPoint, or even somewhere in your browser like Google Docs.
The below table contains different types of the heart symbol along with their respective alt code shortcuts for Microsoft Word.
NOTE: The alt code shortcuts in this table works only in MS Word for Windows.
DescriptionSymbol TextAlt CodeReversed Rotated Floral Heart Bullet☙Alt + 9753White Heart Suit♡Alt + 9825Black Heart Suit♥Alt + 9829Heavy Heart Exclamation Mark Ornament❣Alt + 10083Heavy Black Heart❤Alt + 10084Rotated Heavy Black Heart Bullet❥Alt + 10085Rotated Floral Heart Bullet❧Alt + 10087
To get the Heart symbol using these alt code shortcuts:
Launch your MS Word document.
Place your insertion pointer where you need to insert the Heart sign (♥).
Press down the Alt key.
While holding the Alt key, type the Heart Alt code (3) using the numeric keypad.
Then release the Alt key to insert the symbol (♥).
Related Post: How to Type Heart symbol in Word/Excel
Alt codes are used to type symbols and characters that do not have a dedicated key on the keyboard in personal computers running the Microsoft Operating systems. You can do this by pressing and holding the Alt key while typing the alt code with the numeric keypad.
To type♥ using the Heart Alt code of 3: first, ensure that your NumLock is turned on, then press and hold the alt key while you type the code on the numeric keypad. Then release the Alt key.
Other operating systems like the Mac OS have a similar or extended form of this Alt code feature which I’ll explain soon.
You must press and hold the Alt key before typing the Alt code.
You must use the numeric keypad on the right of the keyboard to type the alt code.
Since you are using the numeric keypad, the NumLock must be turned on. Turning off the NumLock will disable the number pad, and hence no numbers can be typed using the num pad.
If you are using a laptop without the numeric keypad, you should first turn on the hidden numeric keypad. On most laptops, you can turn this on by pressing Fn+NmLk keys simultaneously. Not all laptops have the hidden numeric keypad. If it seems missing in yours, then you cannot use the alt code method to type the Heart (♥) symbol with your laptop unless you connect an external keyboard that has a numeric keypad.
You should also understand that not all symbols can be typed with the alt code depending on the document you are working on. Some of the alt codes work only in Microsoft Word. However, the black Heart (♥) alt code works anywhere on Windows such as text editors, on the web, forms, and so on.
The Heart alt code shortcut for Mac is Option + 2661.
Obey the following steps to type ♥ on Mac:
First of all, place your insertion pointer where you need the Heart symbol.
Then press Option + 2661 simultaneously on your Mac keyboard.
These keystrokes will give the ♥ symbol.
The alt code method of typing symbols is very popular on the Windows operating system.
However, the way you use alt codes on Windows is very different from that of Mac. Most people even think that it’s impossible to use alt code shortcuts in Mac.
As you may already know, the standard apple keyboard also has two alt keys. They are named as Options or ⌥ with a small “alt” label. Though, some of the newest Apple keyboards such as the Magic Keyboard no longer include the “alt” label. But the Option key is also the Alt key on the Mac keyboard, which means that it can be used as an Alt key with non-Mac software.
Does it mean that you can press down the Option key while you type the Heart alt code on your Mac keyboard?
No please. It doesn’t work this way with Mac.
Apple has its way of doing things. So instead of using the Alt or Option key with difficult-to-remember number codes like Microsoft Word, they combined the alt key with some other keys that will make shortcuts easy to remember.
So, if you want the Heart Alt code for Mac, it is the shortcut you may already know, which is Option + 2661.
In 2023, engineer Andrew Martin used LEDs to create a ring that can blink out any date. He got the idea from a fictional engagement ring that flashed the date that the groom and bride met. You don’t need to use a marriage proposal as an excuse to hack together your own blinky ring —it works as a Valentine’s gift, too.: Three out of five hearts.
At the end of 2023, 22-year-old Andrew Martin was celebrating the return of his favorite webcomic Achewood, written by Chris Onstad. The surreal story, which had been on indefinite hiatus since 2011, follows a group of friends (three cats, an otter, a couple bears, and a squirrel) dealing with everyday life: anxiety, aimlessness, and the fear of being found wanting.
Its return inspired Martin, a QA Engineer at Dematic Reddwerks in Austin, TX, to revisit a 2007 storyline in which one of the main characters builds an electronic engagement ring and programs it to blink the date he met his girlfriend. Martin decided to make the ring in real life.
Martin tinkers with the code for his blinky ring design.
This dysfunction is a key part of the storyline that introduces the blinky ring. The character Roast Beef, who suffers from depression and anxiety, wants to propose to his girlfriend Molly (a 17th-century Welsh woman who came back to life and got a job at Taco Bell—don’t ask). But shopping for an engagement ring, with all the attendant money woes, politics, expectations, and standards, sends Roast Beef spiraling.
That’s when he decides to make the ring himself. He wires a chip, resistor, and LED together on what looks suspiciously like a Ring Pop base, then programs the ring to blink the date that he and Molly met. Even the plastic base is true to the character—someone who would look down on an inexpensive homemade ring wouldn’t be the partner he was looking for.
“Roast Beef is in his soul a punk, so he wouldn’t go the traditional channel with precious gemstones,” explains Onstad. “This ring also revealed that beneath all his issues he is a romantic: He made a technology-themed ring for a girlfriend he had originally bonded with over technology.”
And that led to the Sunday afternoon when I sat down with Martin and built my fiancé a ring of his very own. I (the author) actually got engaged while writing this article, so I asked Martin to help me make a blinky ring that would flash the date that my fiancé and I met, just like in the comic. The ring my fiancé gave me has tiny sapphires in it, so I made his DIY version match my more valuable one by using a turquoise LED on top of a gold ring base.
The author’s fiancé Shyam Kulkarni with his blinky ring
“I really wanted to go forward with the spirit of the comic and say, ‘what can I do in an afternoon with the parts I have lying around the house,’” says Martin. “I could take it in a lot of directions, but I went the Achewood route, where I made it sort of grungy but lived up to the spirit of what the comic was all about.”
He envisions this ring as a good introductory electronics project, with lots of room for improvement and development. DIYers could add an on/off switch (right now you have to manually squeeze the batteries together or use a rubber band). Visually, there are a lot of options, such as 3-D printing a gem shape for the top or embracing a hardware-like aesthetic with a decorative breadboard of some sort. Next time, Martin would like to use flat copper tape and find a circuit base to cover the ring so it looks more like the version pictured in Achewood. Also, more prosaically: next time he knows to bend the wires before gluing stuff down.
The man himself, Onstad, reassured us that our ring was cool and all, but spoke the truth: “Roast Beef would have had a pretty tight game on this and used a smaller-circumference ring base, and special-ordered old school breadboard in green. But yours is personal; that’s what matters.”
On one hand, it’s just an LED on a plastic ring base. On the other, it’s a fan’s ultimate homage to a truly touching love story. On my fiancé’s hand, though, it’s a ring that I made just for him, that blinks the date we met. And that’s pretty rad.
Ring of rings
Martin has built a variety of rings, all in various stages of construction.Build your own blinky ring Stats
Time: 1-1.5 hours
Cost: $10 (but if you buy supplies for several rings, say for a class project, the cost per ring will be closer to $5 or $6)
Difficulty: MediumTools & Materials
Clean, dry plastic base from a Ring Pop
3 1.5-volt coin batteries
Solid core wires
Soldering iron and solderInstructions
Connect the ATtiny to the Arduino Uno using the capacitor and breadboard and following this guide. Upload this basic Arduino program, which tells an LED to blink, to check that the programming works.
Modify the blink program so it will blink the date sequence that you want. Martin explains, “We’re going to make a few tweaks to the program to make it good for the ATtiny. First, the LED we will send information to on the ATtiny will be associated with a particular pin (pin 0). Second, we want to turn a simple blinking on and off into blinking a date.” To do that, the program must tell the LED to blink a certain number of times, pause for a second, blink again for the month, pause, and blink the year. Use the (digitalwrite) and (delay) commands at the bottom of the page to modify the code for whatever date you desire.
Pry up the ATtiny and then glue it onto the ring base. Make sure that the side with pin 1 (pin 1 has a little black dot above it) is facing the center of the ring. It will make putting it together much easier.
Create a battery pack: Stack the three batteries on top of one another facing the same direction, then roll them tightly in electrical tape, leaving the top and bottom clear and trimming any excess tape on the edges. Glue the pack down, keeping the positive side facing the same direction as the positive lead of the LED.
Place and hot-glue the resistor close to the shorter, negative lead of the LED.
Use insulated wire to connect the battery pack to the ATTiny. Connect the positive side of the battery to the power pin of the ATtiny (pin 8) and the negative side of the battery to the ground pin (pin 4). Glue the wires in place.
Now it’s time to bend the wires. Bend one end of the resistor up to the negative lead of LED. Bend the other end of the resistor around to pin 5 (diagonally across from the pin with the dot) on the ATtiny. Bend the positive lead of the LED around to pin 8, the same pin the power wire connects to.
Grab the soldering iron. Solder the LED wire to the battery wire and the chip, making sure to get all three. Then solder the negative lead of the LED wire to the resistor. Finally, solder the other end of the resistor to pin 5 on the ATtiny.
Dictation lets you enter text using your voice instead of typing on the keyboard. It’s also known by other names like talk to text, voice to text, or speech to text. However, sometimes the dictation microphone icon may be missing on the keyboard or it may not convert what you speak into text.
If dictation isn’t working on your iPhone, iPad, Apple Watch, or Mac, here are some reliable solutions to fix the problem.
Fix dictation not working
Connect to Wi-Fi or Cellular
You can use dictation offline on iPhone 6s and later. However, not all dictation languages work without being connected to the internet. So, for best results, make sure your iPhone or iPad is connected to Wi-Fi or cellular data.
Plus, when you select a new dictation language (or immediately after setting up your iPhone), you will have to connect to Wi-Fi for support files to download.
Enable and disable Airplane Mode
Go to the iPhone or iPad settings app and enable Airplane Mode. After waiting for around 15 seconds, tap the same toggle to turn off Airplane Mode.
Force quit the app in question and reopen it
If dictation isn’t working in a particular app, force close and reopen it. After that, tap the microphone key on the iOS keyboard and try to use dictation. It should input what you speak.
Restart your iPhone
When dictation is not working on iPhone, or it comes and disappears from the screen, simply turn off your iPhone and turn it back on. It’s an important fix. So, make sure you don’t skip it.
Disable and re-enable dictation to refresh it
Follow these steps to turn off and turn on dictation which should ensure it starts working correctly. This particular step will help you verify if you had enabled dictation in the first place or not!
Open iPhone, iPad, or iPod touch Settings and tap General.
Wait for a few seconds and restart your iPhone.
Now, open the Apple Notes app, tap the microphone icon on your keyboard, and dictation should work like a charm.
Turn off extra dictation languages
If you’re bilingual or multilingual, you might have added more than one keyboard to your iPhone. After that, you’ll see a Dictation Languages option appear below the Enable Dictation toggle. Tap it and uncheck all the languages except one. Now, restart your iPhone and try using dictation. It should work as expected.
Once that’s done, you can check more dictation languages if you want to use them. In case doing so starts causing dictation problems again, update your iPhone.
Important: Make sure you select the right accent for the same language. For example, if I’m from India, for best results, I should select English (India) as my dictation language instead of English (US) or English (UK).
Dictation option missing in iPhone Settings?
If you don’t see the Enable Dictation option in the steps above, follow these two fixes:Add iOS keyboard
You will lose Apple’s dictation feature if you add just a third-party keyboard (like SwiftKey) and remove the built-in Apple keyboard. To see the Enable Dictation option in iPhone keyboard settings, do the following:
Choose a keyboard under Suggested Keyboards or Other iPhone Keyboards.
Now go back and you should see the Enable Dictation option. If not, restart your iPhone.
Note: Some third-party keyboard (like SwiftKey) may also offer their own dictation feature. You can use that while using the third-party keyboard.Unrestrict Siri & Dictation
Follow these steps to ensure dictation is not restricted:
Open iPhone or iPad Settings and tap Screen Time.
If it says, Turn On Screen Time, you can skip all the steps below. Else, tap Content & Privacy Restrictions.
If Content & Privacy Restrictions is disabled, you can skip the steps below. If it’s enabled, tap Allowed Apps.
Under Allowed Apps, make sure Siri & Dictation is enabled.
You should see the Enable Dictation option after adding the iOS keyboard and ensuring dictation isn’t restricted.
Try using dictation without AirPods or earphones
At times, you may not be able to use dictation at all, or it may function poorly with wired or wireless earphones. If it isn’t working at all, make sure your iPhone isn’t stuck in headphone mode.
Remove iOS keyboard and add it again
Here’s how you can remove the iPhone keyboard and re-add it to ensure dictation works:
Tap Add New Keyboard and select your desired iPhone keyboard. Now, open Notes or a similar app and use dictation. It should work well.
Turn off Siri and turn it back on
Siri and dictation are related. So, if dictation isn’t working after following the above solutions, turn Siri off and on.
Go to Settings and tap Siri & Search.
Turn off Listen for “Hey Siri” and Press Side (or Home) Button for Siri.
Restart your iPhone.
Enable Siri again by turning on the switches you turned off in step 2.
Clean iPhone’s microphone
If your iPhone’s microphone grills are dirty, it can cause blockage, which causes poor experience on calls, Siri, voice recordings, dictation, and other related things. To fix this, make sure you remove any iPhone case and use a cloth, dry brush, or toothpick to clean the microphone holes.
Important: If any external device (like earphones) is attached to your iPhone, disconnect it to ensure the on-device mic is used.
Reset network settings or all settings
In case the dictation problem continues, reset your iPhone’s network settings. This should help, and if it doesn’t, you can reset all settings. Here’s how to do both.
Finally, if nothing helps, contact Apple Support or take your iPhone to an Apple Store and get it inspected. If there are issues with the iPhone hardware, they will take care of it.
Fix dictation not working on Apple Watch
When dictation isn’t working on your Apple Watch, follow these basic fixes first:
Restart your Apple Watch
Make sure your watch is running the latest version of watchOS
Check for Siri and Dictation restriction on iPhone (mentioned above)
Clean the Apple Watch for a perfect microphone experience and remove any full body case or cover
Besides the above checks, follow these solutions to fix dictation not working on Apple Watch.
Make sure Apple Watch is connected to Wi-Fi, Cellular, or the iPhone
Your Apple Watch can connect to the internet via Wi-Fi, Cellular (on cellular models), or use the iPhone’s internet. We have explained more in this interesting post titled how to know whether your Apple Watch is connected to the internet or not. Dictation should work flawlessly once Apple Watch has internet connectivity.
Enable dictation on Apple Watch
Do you see “Dictation Disabled. You can enable dictation in Settings” on your Apple Watch? Here’s how to enable (or check) dictation on Apple Watch:
Open the Settings app on Apple Watch and tap General.
Toggle on Dictation and tap Enable Dictation to confirm. Now go back to the typing screen and tap the microphone icon to use dictation on your Apple Watch.
Make sure Apple Watch and iPhone language are the same
You can simply mirror your iPhone language to your Apple Watch or use different settings for your wrist. But choosing the latter may cause dictation problems on the Apple Watch. To fix this, follow these steps:
Open the Watch app on your paired iPhone and tap General.
Tap Language & Region.
Tap Mirror my iPhone.
After a minute, restart your iPhone and Apple Watch. Now, dictation should work flawlessly on your Apple Watch and let you type with your voice.
Unpair and repair your Apple Watch
Finally, if you’re still unable to use dictation on your Apple Watch, unpair it from your iPhone and pair it again.
Fix dictation not working on Mac
Here’s how to ensure dictation starts working on your Mac and lets you type without the physical keyboard.
Turn off Voice Control
Do you see “Keyboard Dictation is disabled when Voice Control is on” in the dictation preferences screen on Mac?
Follow these steps to turn off Voice Control which should stop the conflicting issues with dictation:
Select Voice Control from the left.
Uncheck Enable Voice Control.
Now, you should not see any error message in the dication settings on Mac.
Enable dictation on Mac
To enable dictation, do any of the following:
Restart your Mac
Connect your Mac to the internet
Additionally, your Mac must be connected to the internet to use dictation if:
Offline dictation file isn’t downloaded, or
The language you’re using dictation in isn’t supported for offline dictation.
Note: On a Mac with Apple silicon (M1, M1 Pro, M1 Max, M1 Ultra, and their successors), some basic dictation requests like composing messages or notes are processed on the device without needing internet. Using dictation in the search box requires an active internet connection.
Use dictation in a quieter room
If you’re having patchy experience with dictation on Mac, use it in a room with less noise. This is especially help if you have an old Mac.
Tip: Dictation can listen to you continuously for about 30 to 40 seconds. After that, you must pause and let it process and type what you said before speaking again.
Turn dictation off and back on
Select the right microphone for dictation
While you’re on the dictation preferences screen, make sure the correct microphone is selected. Select Automatic if you often use AirPods or other audio devices with your Mac.
Quit the Mac app and retry using dictation
Disable and enable Siri on Mac
Delete Speech Recognition file
Finally, if nothing helps, follow these steps:
From Finder, press Command + Shift + G.
Delete this file from here.
Restart your Mac.
Now, try using dictation and it should work perfectly. If the problem continues, go to ~/Library/Caches/com.apple.SpeechRecognitionCore and delete the file (if you see it).
Excel Won’t Open on Windows 11? Here’s What to do Can’t open the Excel files on Windows 11? Try these fixes
Sometimes, Windows 11 may fail to launch Microsoft Excel, or it doesn’t show any content when you try to open an Excel file.
Misconfiguration or internal problems with the Excel app are the two most common reasons behind this problem.
You should update or re-install MS Office and also follow other methods from this article to solve the Excel files not opening issues.
Are Microsoft Excel files not opening on Windows 11? Many users have been facing this issue in recent days.
Usually, You can easily open any Excel files using Microsoft Excel or other supported programs. But if that doesn’t happen on your PC, there is an issue. You can try some methods to solve the Excel files, not an opening problem on Windows 11. However, before knowing about that, we should know about the reasons.Why are Excel files not opening on my Windows 11 PC?
If you cannot open any or some Excel files, these are the possible reasons:
Outdated Excel application: If Microsoft Excel is highly outdated, this can be the reason you are facing the problem.
Problematic Update: A problematic Windows update or Excel update may cause the problem.
Misconfiguration: Any misconfiguration on Windows or Excel may be the reason.
Problematic Excel app: If you are not using the official version of Microsoft Excel, you may occasionally encounter various problems, including file opening issues.How can I fix it if Excel files are not opening on Windows 11?
First, you should do the following things before going through the actual methods:
Make sure to open the file with Microsoft Excel.
Update Windows to the latest version.
Update Microsoft Excel to the latest version.
Maximize and Minimize Excel if it shows no content.
Ensure your Microsoft Office application is genuine, not a cracked or pirated version. To check if the app is genuine or not, try this tool.
Disable Antivirus temporarily and see if it helps.
After ensuring the above things, follow these methods to solve the Excel files not opening an issue on Windows 11:1. End any Excel and Office processes from Task Manager
Sometimes, some background processes remain active for a glitch with either Windows or Office, even though the application was closed. So when next time the user wants to open that app, they may face problem. It may happen with Microsoft Excel too.2. Ignore other apps that use DDE
According to some users, unchecking the above option fixes the Excel file not opening issue on Windows 11.3. Reset file associations
After resetting, when you open any Excel file next time, you may get the option to choose which program to use. Select excel. This time, the problem will not appear.
If necessary, learn how to fix file association issues on Windows.4. Open Excel in Safe Mode 5. Disable add-ins
Expert tip:6. Repair Microsoft Office
If possible, you should choose the Online Repair option rather than Quick Repair. However, if the problem is critical, the online method is the best way to sort it out.
Is the above process failing? Learn how to fix couldn’t repair Office problem.7. Re-install MS Office 7.1 Uninstall Microsoft Office
For this, you can use Revo or IObit Uninstaller too. These third-party options are better than Windows uninstallers. These can remove any program from your PC without leaving any leftovers.7.2 Install again
If you don’t have a Microsoft 365 subscription, you may need to follow slightly different steps to download Office apps.
After installing, try to open the Excel files again and see if it has fixed the problem.8. Use Excel online
Go to the Microsoft Excel Online site.
Sign in with your Microsoft Account if necessary.
Upload the file you want to open.
Enjoy Excel online.
If, after trying the other methods, the problem persists, consider using Excel online. Like Google Sheets, Microsoft also has made its service online, which is, in fact, more powerful.
Sometimes, the file you try to open is not well-optimized for Excel. In this case, you can use other Office alternatives like Google Sheets, Libra Office, etc. Also, consider using any CSV viewers if it is a CSV file.
Still experiencing issues?
Was this page helpful?
Start a conversation
FIX: The remote device or resource won’t accept the connection Check solutions recommended by our trusted experts
The remote device or resource won’t accept the connection error can be caused by misconfigured proxy settings or the installed antivirus.
Your primary approach should be to disable the proxy.
Some users fixed things by resetting the IP or force updating group policies, amongst other solutions.
INSTALL BY CLICKING THE DOWNLOAD FILE
To fix Windows PC system issues, you will need a dedicated tool
Fortect is a tool that does not simply cleans up your PC, but has a repository with several millions of Windows System files stored in their initial version. When your PC encounters a problem, Fortect will fix it for you, by replacing bad files with fresh versions. To fix your current PC issue, here are the steps you need to take:
Download Fortect and install it on your PC.
Start the tool’s scanning process to look for corrupt files that are the source of your problem
Fortect has been downloaded by
readers this month.What does The remote device or resource won’t accept the connection error mean?
The error message indicates a problem with the network settings, which, in turn, prevents the connection. Users generally reported The remote device won’t accept the connection error on Windows 10 Wi-Fi.
Here are a few common reasons behind it:
Misconfigured proxy settings – If your computer has a proxy set up, it’s likely to lead to the error.
Conflicting third-party apps – Certain antivirus and third-party firewalls can affect how the connection is set up, and are one of the most common reasons behind the problem.
Bug in the installed version of the OS – For many users, the message in the troubleshooter showed up after updating the OS, which likely points to a bug in the installed version.
Issues with the drivers – Frequently, incompatible, corrupt, or outdated drivers could lead to errors.How can I fix The remote device that won’t accept the connection error?
Before we head to the slightly longer solutions, let’s try a few quick ones and see if this help:
Restart the computer.
Turn off the router/modem, wait for a minute, and then power it on.
Disable any third-party antivirus or firewall installed on the computer. If that works, we recommend you switch to a more reliable antivirus and an effective firewall.
Verify whether the error is seen across devices on the network or just one. In case it’s the former, you would have to contact the ISP (Internet Service Provider), while in the case of the latter, check the solutions below.1. Turn off proxy settings
This solution worked for most users and got things up and running when they received The remote device won’t accept the connection message for a shared folder. Also, find out what to do if the proxy won’t turn off.2. Reset the affected browser
We have listed the steps to reset Google Chrome. Since the steps remain similar for most, you can easily reset the other browsers.
Expert tip:3. Reset IP 5. Uninstall conflicting applications
If the problem first appeared after downloading a program, usually a security software or one that modifies the Internet settings, uninstalling the app should work.
You can surely opt for CCleaner here, as it is a great maintenance tool that has an uninstall feature to help you easily uninstall any conflicting app.
⇒ Get CCleaner
If nothing else has worked yet, your best bet to fix The remote device or resource won’t accept the connection error is to uninstall the recent updates. And once done, the problem should be gone for good.
Still experiencing issues?
Was this page helpful?
Update the detailed information about Apple Keyboard Light Blinking Twice And Won’t Reconnect To Mac? Here’s The Fix on the Bellydancehcm.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!