Trending December 2023 # An Error 0X80070002 Has Occurred While Running The Setup # Suggested January 2024 # Top 12 Popular

You are reading the article An Error 0X80070002 Has Occurred While Running The Setup updated in December 2023 on the website Bellydancehcm.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested January 2024 An Error 0X80070002 Has Occurred While Running The Setup

If when you try to install, or most especially attempt to uninstall a program via the Programs and Features applet in Windows 11/10 and receive the error message An error [0x80070002] has occurred while running the setup with the accompanying error code, then this post is intended to help you. Bear in mind that the error can occur with a value other than 5005 – the solutions in this post still apply.

Depending on the program, when you encounter this issue, you’ll receive the following similar error message;

If the error still occurs, please contact your vendor: Activision (#ttlD_STRING1 tttt).

You may encounter this error due to residual files from the previous uninstallation process of the program or the program is still fully installed on your Windows 10 computer and you’re trying to install the same program. Also, the error can occur due to a botched software install/uninstall process – which means the software in question was not previously completely installed/uninstalled.

An error 0x80070002 has occurred while running the setup

If you’re faced with this issue, you can try our recommended solutions below in no particular order and see if that helps to resolve the issue.

Run the Program Install and Uninstall Troubleshooter

Use third-party software uninstaller

Install/Uninstall the program in Clean Boot state

Download and run the program installer

Uninstall the program via Registry Editor

Let’s take a look at the description of the process involved concerning each of the listed solutions.

1] Run the Program Install and Uninstall Troubleshooter

This solution requires you to run the Program Install and Uninstall Troubleshooter from Microsoft and see if the issue is resolved. The Program Install and Uninstall troubleshooter helps you automatically repair issues when you’re blocked from installing or removing programs. It also fixes corrupted registry keys.

2] Use third-party software uninstaller

The Windows 10 Programs and Features applet can sometimes be inefficient in removing software from your device – in some cases, even though the software has been successfully uninstalled, there are still residual files that are left over on your machine and these can cause conflicts. In cases like this, it’s better to use a third-party software uninstaller as they do a thorough job of removing software from a Windows computer.

3] Install/Uninstall the program in Clean Boot state

Conflicts can occur during your software installation/uninstallation. In this case, you can perform a Clean Boot of your Windows 10 device and then retry the software installation or uninstallation.

NOTE: Error 0x80070002 can also be seen when using Windows Update, Windows Upgrade, Windows Features, Microsoft Store, Windows Backup, Outlook, Sandbox, System Restore, Microsoft Account, Printer, and Hyper-V.

4] Download and run the program installer

This solution simply requires you to download the full version of the program in question and begin the installation procedure. At some point during the installation, it will detect that the program already resides on the computer and it will prompt the user to uninstall the program. Select Yes to that option. The new program will then be installed properly, and then it can be uninstalled.

5] Uninstall the program via Registry Editor

This solution requires you to uninstall the program via the Registry. This is an invasive method; so be sure to back up the registry or create a system restore point as necessary precautionary measures.

I hope something helps!

You're reading An Error 0X80070002 Has Occurred While Running The Setup

An Authentication Error Has Occurred (Code: 0X800706Be)

Some Windows 11/10 PC users have reported they get the error message An authentication error has occurred with the error code 0x800706be when trying to connect to a host computer via Remote Desktop. This post provides the most applicable solutions to the issue.

An authentication error has occurred (Code: 0x800706be)

If you get an error prompt with the following error message and code An authentication error has occurred (Code: 0x800706be) when you try to connect to a remote Windows-based machine from a Windows 11-powered client computer, you can apply our recommended solutions/workarounds outlined below to have the issue resolved.

Initial checklist

Download and use the Microsoft Remote Desktop app

Enable and use Remote Desktop without a password

Clear credentials in Credential Manager

Disable Remote Desktop Connection with Network Level Authentication.

Let’s see these solutions/workarounds in detail.

Read: Remote desktop can’t connect to the remote computer in Windows

1] Initial checklist

An authentication error has occurred (Code: 0x800706be) error indicating the problem is an authentication error. So, we suggest you carry out the tasks in this initial checklist which are basic troubleshooting for the most common underlying causes of the problem you have encountered on your PC. After you complete each task, check to see if you can connect remotely without issues.

Update Windows to the latest build. More often than not, issues you may encounter on your PC can be resolved by simply updating Windows to the latest build/version. Updates can prevent security issues and improve compatibility and program features and will usually address bugs present in the previous iterations of the operating system.

Run SFC scan. Apart from or coupled with your computer running outdated Windows builds, a major source of PC woes is corrupted system files. So, if you’re having issues and your system is up to date, you can run an SFC scan which checks the integrity of Windows system files by scanning all protected system files and replacing corrupted files with a cached copy that is located in a compressed folder. If the SFC scan fails at the first instance, you can run the DISM scan and on completion, rerun the SFC scan.

Perform System Restore. Provided the feature is enabled on your system, the System Restore feature comes in handy when there are changes made to your system which could also be installing a new system update that seemingly broke some aspects of the operating system functionality, especially if you were certain that everything was working fine before the update.

Create a new User Account. A corrupted user account which can be caused by several reasons including an abnormal or unexpected shutdown of your Windows 11/10 device could be a likely culprit to the issue in hand. In this case, to test if you have the issue, you need to create a new user account and sign into the new account. If the issue doesn’t reoccur, you can repair the corrupt user profile and see if the issue is resolved. If not, simply move to the new user account you created.

Read: RDP Authentication error has occurred, Function requested is not supported

2] Download and use the Microsoft Remote Desktop app

This is more of a workaround than a solution that requires you to download and use the Microsoft Remote Desktop app from the Microsoft Store instead of using the inbuilt remote desktop client (mstsc.exe). Although this worked for most affected PC users, they reported the app has too less options and that using the app is not a solution for full daily use and if the fullscreen without the taskbar of the local/client system is needed. In any case, you should give it a try and if you don’t find the app suitable or it just didn’t work for you, you can use any of these best free Remote Desktop software for Windows 11/10 or proceed with the next solution.

3] Enable and use the Remote Desktop without a password

By default, PC users are required to set a password to be able to access and use the native Remote Desktop feature in the Windows operating system. Since the error in focus is an RDP authentication error which is possibly been triggered due to, you trying to connect and log in remotely via Remote Desktop Protocol (RDP) with a user account without a password set or username with a blank (null) password. In any case, to resolve the issue, you have two options:

For security reasons, set a password for the user account that requires to logon remotely to a computer via Remote Desktop.

If you’re unable or cannot assign a password to the user account, then you can follow the instructions in the guide for any of the methods on how to easily enable and use Remote Desktop without a password.

4] Clear credentials in Credential Manager

Credential Manager lets you view and deletes your saved credentials for signing into websites, connected applications, and networks. Ideally, you should not remove the Credentials which are stored. However, just like any cached data on your PC, these cached credentials can easily get corrupted or just go haywire for no reason consequently leading to the authentication issue you’re currently experiencing. In this case, it becomes necessary to clear all credentials in Credential Manager of which your data will be deleted and you will start from scratch again which will rebuild the credentials cache to a pristine state.

Read: Enter network credentials error on Windows

5] Disable Remote Desktop Connection with Network Level Authentication

Network Level Authentication (NLA) is a feature of Remote Desktop Services (RDP Server) or Remote Desktop Connection (RDP Client) that requires the connecting user to authenticate themselves before establishing a session with the server. This feature is essential for secure RDP connections because NLA is how Windows authenticates remote desktop clients and servers before sending your credentials to a remote machine.

Since you ‘trust’ the host machine you’re trying to connect to, you can disable Remote Desktop Connection with Network Level Authentication on the destination computer by following these steps:

Open Control Panel.

Select Security and System.

Go to the Remote tab.

Checkmark the Allow Remote Assistance connections to this computer option.

At the Remote Desktop section on the page, select the radio button for the Allow Remote Connections to this computer option.

Now, uncheck the Only allow connections from computers running Remote Desktop with Network Level Authentication (recommended) option.

Read: Cannot Connect to RDS Server after Server restart or Windows Update

I hope this helps!

These post(s) with similar error codes might interest you:

What does error code 0x800706be mean?

The error code 0x800706be is known to occur at different events. To successfully fix the error will depend on the instance you encountered the error code. You’re likely to get this error code due to a system file issue. This is a general error that points to a misconfigured or corrupt system file.

Should I disable the Remote Procedure Call?

Many Windows operating system procedures depend on the RPC service. Microsoft recommends that you don’t disable the RPC service. By default, RPC uses the port range of 1024 to 5000 for allocating ports for endpoints. The bottom line is disabling the Remote Procedure Call can solve various problems at times. If you think your PC is having issues due RPC, you can try disabling it temporarily.

How To Throw An Error In An Async Generator Function In Javascript

The code often throws an error, and handling errors is more important. JavaScript also allows users to throw a custom error using the ‘throw’ keyword. We can catch the errors in the catch block.

We can use the try-catch syntax to catch errors thrown by normal functions. Let’s understand it by the example below.

Example 1 (Throw Errors in Regular Function)

In the example below, we have created the throwError() regular function, which uses the throw keyword to throw an error with the custom error message. We have executed the function inside the try block. If the function throws any error, controls go to the catch block, and that’s how we can detect the error.

let content = document.getElementById(‘content’); function throwError() { throw new Error(‘Error from normal function’); } try { throwError(); } catch (e) { content.innerHTML = e; }

If we make the throwError() function asynchronous, it will generate another error, as we can handle the errors thrown by the synchronous function using the try-catch block.

To solve the problem, users must use the then-catch block syntax to resolve the promises.

Syntax

Users can follow the syntax below to resolve the errors the async function throws.

// print content })

In the above syntax, throwError() is a function that returns the promises, which we solve using the then and catch block.

Example 2 (Throw Error From Async Function)

In the example below, the throwError() function is an asynchronous function, as we have added the ‘async’ keyword before the function keyword. We have thrown the error from the async function as we throw from the regular function.

After that, we handled the promise using the then and catch block. In the output, users can observe that as the async function throws an error, control goes to the catch block.

let content = document.getElementById(‘content’); async function throwError() { throw new Error(‘Error from Async function’); } content.innerHTML = res; content.innerHTML = err; }) Example 3 (Throw Error by Rejecting Promise in Async Function)

We can return the promises from the async function. The rejecting promise in the async function works like throwing the error. We have used the reject() method inside the callback function to reject the promise.

The ‘then-catch’ block is used to resolve the promise returned by function, and users can see that controls go to the catch block.

let content = document.getElementById(‘content’); async function throwError() { reject(“This promise is rejected from the async function.” ); }); } content.innerHTML = res; content.innerHTML = err; })

Users learned to throw an error from the asynchronous function. Users can use the ‘throw’ keyword like the regular function to throw an error. Users need to handle the error using the ‘then-catch’ block as the async function returns the promise rather than handling using the try-catch block.

Fix: Slack Got Stuck While Processing The Uploaded File

Slack got stuck while processing the uploaded file [Fix]

208

Even if Slack is great, it seems like it sometimes gets stuck while processing the uploaded file, giving headaches to workers when sharing messages.

You should first restart your PC and router, then check if the network connection is stable.

As some users claimed, clearing specific browser data easily solved this annoying issue on Slack.

If Slack got stuck while processing uploaded files, you’ll probably need to temporarily disable your antivirus software.

Struggling with various browser issues? Try a better option: Opera One

You deserve a better browser! Over 300 million people use Opera One daily, a fully-fledged navigation experience coming with various built-in packages, enhanced resource consumption, and great design.

Here’s what Opera One can do:

Optimize resource usage: Opera One uses your Ram more efficiently than Brave

AI and User Friendly: New feature directly accessible from the sidebar

Gaming friendly: Opera GX is the first and best browser for gamers

⇒ Get Opera One

A few Slack users have had a hard time uploading files to the shared channel or via direct messages. Allegedly, the upload was stuck and Slack was processing the file without any signs of success.

Slack, the team collaboration service, is one of the most used services in the niche. There’s a large array of available features, and it covers everything an organization needs.

Now, if you’re facing the same issue, firstly, make sure that the file isn’t corrupted. Secondly, there’s a size limit, so uploading files over a few dozens of megabytes won’t work all that well.

In case you encounter this problem, you should definitely check first if Slack servers are down. To easily do it, just access the Slack status official page.

On the other hand, if you’ve covered those two and the issue persists, check the alternative steps we enlisted below.

What files can I upload on Slack?

To improve your work efficiency with your team, you can add files to your Slack workspace. Files are searchable and shareable across Slack, so it’s handy for everyone to find the information they need and work together.

Keep in mind that you can share just about any file type up to 1GB in size in Slack from your device, or add them from a file management app like Box, Dropbox, Google Drive, or OneDrive.

Posts let you collaborate and share fully-formatted documents with your teammates directly in the app. Do not forget that even if you’re allowed to view posts on Slack’s mobile apps, you’ll need to use the desktop client to create and edit them.

Now, let’s see what you can do if Slack got stuck while processing the uploaded file.

What can I do if Slack is stuck while processing uploaded file? 1. Check your Internet connection

First things first. A mere glance at this issue is enough to concur something’s wrong with your connection. Uploading files should be an integral part of the application, both for desktop and in the browser.

Here are some steps you should follow:

Update Slack.

Restart your PC and router.

Update router’s firmware.

Use a wired connection instead of Wi-Fi.

2. Use an alternative browser

Sometimes, the best way to get rid of Slack issues is by switching to a specialized browser and accessing the app from its main context menu. In this matter, we strongly recommend trying Opera.

When you switch Internet browsers to Opera, you will automatically be prompted to import whatever data you want from your old web browser.

For those of you who are already using Opera, keep in mind that you can import everything by following the steps below. Lose nothing, gain everything when you switch Internet browsers.

Thus, you’ll always be able to add Slack to Opera Sidebar and use it in no time.

If you choose Opera, you can easily customize it to meet your needs, find thousands of extensions in the Opera add-ons store, and use Chrome extensions as well.

Expert tip:

Check out Opera’s best features:

Built-in VPN

Easy to use and fully customizable

Sidebar where you can add your workspaces

Integrated Ad Blocker

Opera

If Slack got stuck while processing the uploaded file, try Opera and never worry about this kind of issue.

Free Visit website

3. Clear browsing data (for browser version) 3.1 Google Chrome 3.2 Mozilla Firefox

Hit the Windows key, type Firefox, then open the first result.

Press simultaneously on Ctrl, Shift and Delete on your keyboard to open the Clear All History window.

In the Time range to clear section, make sure you choose Everything.

Then, checkmark the Cookies and Cache boxes, then select the OK button.

Restart your browser and check if the issue persists.

3.3 Microsoft Edge

In the long run, this can affect the performance of the browser: slow down the loading and prevent traffic on the individual pages.

It can, as well, inflict the issue at hand. You can discover above how to clear browsing data on the 3 most-used browsers for Windows 10 or 11.

If Slack is still stuck while processing the uploaded file, make sure you also verify the other listed solutions.

3. Disable antivirus temporarily

Hit the

Windows

key, type

Control Panel

, then navigate to the first result.

Navigate to System and security.

From the left window pane, choose to Allow an app through Windows Firewall.

Now, in the right side of the window, select Turn Windows Defender Firewall on or off.

Make sure you turn of both sections shown below.

Some users in distress addressed the issue by disabling the antivirus temporarily. Namely, the best Windows 10/11 antivirus software may slow down or even block Slack’s execution.

This mostly concerns the desktop application, but the web-based app can be blocked by the protective solutions, too.

Even though this mostly doesn’t apply to Windows Defender, you can try disabling the web-based protection for the time being and look for improvements.

4. Allow Slack in Windows Firewall

For free team communication, which includes files sharing, Slack needs to works freely. The common limitation which affects Slack’s performance is Windows Firewall.

Namely, even though it should be allowed by default, we encourage you to check the related settings and confirm it.

If Slack still seems to be stuck while processing the uploaded file, we have one more option you can try, but you should use it only in the last instance.

5. Reinstall the app

Finally, if Slack got stuck while processing the uploaded file and you’re using the desktop client for Slack, reinstalling it should be a good idea. Even though it’s unlikely, the corruption of installation files can happen.

And if that’s indeed the case, the best way to fix it is to completely reinstall the app. In addition, Slack comes in various versions.

So, if you’re having a hard time with the desktop client, the UWP version from Microsoft Store might do you good.

How do I stop processing upload in Slack?

Slack stuck on the upload screen is a temporary error that was reported frequently and you can quickly stop the processing loop with a Reload from the Menu (or using the shortcut: Ctrl + R).

In conclusion, this is what you can do if Slack got stuck while processing the uploaded file. We ensured to deliver only the best options, so you’ll surely manage to fix today’s annoying issue.

Was this page helpful?

Optimal Database Setup Hardware Guide

With server hardware getting more and more powerful, and prices dropping just as dramatically, companies, especially smaller ones, are seeing their options open up when it comes to buying database servers. This means that database administrators who are newer in the field are being asked to design increasingly powerful systems.

When designing database systems for a large system you are able to purchase large database servers with a large number of hard drives and plenty of RAM. There are some general rules to fallow when designing your system.

The hard drives of your SQL Server are the easiest place to ensure that you have enough performance as well as the most common place to skimp on resources. The most common mistake that people make when designing the disk arrays is to only calculate the amount of free space that is needed. The amount of space is only one part of what the storage subsystem needs to be designed for. The second part is the amount of IO operations that the storage needs to be able to support.

One general rule to follow is that a high write database is going to be best served by a RAID 10 array. A high read database is typically going to be best served by a RAID 5 array. The reason for this is that there is a performance hit when writing data to a RAID 5 array. This is because when writing to a RAID 5 array, the storage must calculate a parity bit before writing the data. It takes a great deal of time to calculate this parity bit and this time translates into lower write performance to the RAID 5 array.

Because of this performance, it is always recommended to put your transaction logs on a RAID 10 array. Transaction logs are always high write files no matter if the database is a mostly read database or mostly write database. The tempdb database should also be placed on a RAID 10 array, specifically on a separate RAID 10 array from the transaction log files.

When each of your disk arrays is partitioned you should ensure that the partitions are correctly aligned. By default, Windows 2003 and below incorrectly aligns partitions, which causes suboptimal performance of the disk subsystems. This can be corrected by creating the partitions using the chúng tôi utility (diskpar.exe in Windows 2000). Each of the partitions should be created with an alignment of 64kb where the default when partitions are created is 32kb. Windows 2008 creates its partitions with an alignment of 128kb by default.

Microsoft KB Article 923076 describes chúng tôi and how to use it.

A newer technique which Microsoft has recently begun recommending is that your databases should have one physical database file for each two to four CPU cores. This should be done for each file group in the database.

If your server has two quad chip CPUs, you have a total of eight cores. We’ll also assume that the database has two file groups one named Data and the other Indexes. Each file group should have two to four physical files. This technique allows the SQL Server to optimize the IO to the disks. Whenever possible you should spread out the files so that as few files as possible are on each storage array.

The tempdb database should be configured a little differently. When configuring the tempdb database, it is recommended that you have one physical file per CPU core in the database. This allows the system to push the most IO to the tempdb database as possible. As with the user databases, you should put as few files as possible per disk array.

You should always have at least two file groups within the database. The first should contain your tables. The second should contain your indexes. You want to have these in separate file groups so that when the indexes are being queried, the load to the tables is not impacted and vice versa.

In the past it was quite common to buy a database server with only two or four gigs of RAM installed. This is because the RAM was expensive to purchase.

These days, RAM is quite inexpensive and you should generally buy as much as you can chúng tôi RAM will almost always make your database run faster. The exception to that is when you have more RAM installed than the database is in size. As an example, if you have a 3 GB database, and you have 8 GB of RAM installed, adding more RAM to the server will not help your database performance since SQL Server can probably already load the entire database into memory.

When deciding how much RAM to allocate to the SQL Server, do not simply allow the SQL Server to have all the memory on the system. The Windows operating system needs memory to run, as does any other software installed on the database server such as your backup software, anti-virus software, etc. It is recommended that you leave between one and two gigs of RAM for the OS and other software to use. This number may be higher or lower depending on what software you have installed.

Because no two database servers are the same, there are no hard and fast rules about what your hardware solution should look like. There are a wide set of choices available to you, and the key to designing a solid solution that you can continue to use for many years into the future is to understand your databases requirements, and understand the hardware which you are using and where these requirements meet so that you aren’t under-purchasing today nor over-purchasing for next year.

While Loop In Shell Scripting

Introduction to While loop in Shell Scripting

In this article, we will learn about While loop in Shell Scripting. When we need to do the same task or perform the same operation then we need to write a program which does the work for one time and repeat the same program the number of times which we want to perform or we can call the same program again and again until the number of times. This calling can be done in many ways one of the ways is looping. While loop provides a way to execute the same program by checking a condition when the condition satisfies the program will execute otherwise it won’t execute and the process repeats until the condition fails to meet.

Start Your Free Software Development Course

Web development, programming languages, Software testing & others

Syntax for While loop

The syntax for the while loop in shell scripting can be represented in different ways based on the use as below:

First Syntax Method while [ condition ] do command1 command2 done

Explanation to the above syntax: In the syntax above, the condition is checked on a variable so that if the condition is satisfied the commands will be executed. We’ve got some built-in keywords in shell scripting, and while, do, and done, they’re among those. In the above syntax example, until the condition evaluates to true all the commands command1, command2 between do and done keywords will be executed and while loop will terminate when the condition is not satisfied and proceeds to statement next to the done keyword.

Second Syntax Method

If we want to check conditions on multiple lines of a text file then we can use the following syntax.

Code:

while IFS = read -r line do command on $line command1 on $line done < “file path”

Explanation to the above syntax: In the above syntax, while, do, and done are built-in keywords whereas IFS is used to set field separator which is by default a white space and -r indicates read mode. The above while loop will read line by line from the text file in the path specified and execute the commands on the current line until all lines in the text file are read and operations are performed on them. Once all the lines are finished than while loop will terminate

Third Syntax Method

If you want to perform some operation or execute a function infinite times then we can define while loop as below:

Code:

while : do command command1 done

Explanation to the above syntax: In the above while loop syntax method, there is no condition to check and perform operations based on the result of the condition. By default, the while condition evaluates to true always and commands in while loop will execute infinite times.

Flow Diagram for While loop

Let us consider an example for while loop and discuss the flow of the while loop using the example as below:

Code:

a=0 while [ $a -lt 10 ] do echo $a a = 'expr $a + 1' done

Output:

Explanation to the above code: In the above, while loop program, first we initialized the variable a with value 0 and we started while loop with condition a < 10 where -lt is less than so it checks the condition as it evaluates to true the body of the while loop will execute which echo $a means, it displays the value of a and next statement a = `expr $a + 1` which will increment the value of a by 1 and again condition will check and execute the body of the loop until the condition evaluates to false and program execution goes to the statement next to the end of the while loop. In the above while loop example, it will execute a total 10 times from 0 to 9 and during the 11 times the condition evaluates to false and the loop will terminate there.

How does While loop work in Shell Scripting?

Code:

n = 1 while [ $n -le 5 ] do echo "Welcome $n times" n=$((n+1)) done

Explanation to the above code: In the above while loop example, we are checking whether the condition is < 5 as it evaluates to true the body of the loop will execute and display welcome value times where value is n. It will continue until the condition evaluates to false.

Output:

Examples to Implement in While loop in Shell Scripting

Let us discuss while loop with different examples and discuss what it is trying to do with that particular while loop and how we need to write and what things need to take care of while writing.

Example #1

Let us write a while loop to read a text file line by line and the while loop program is below:

Code:

file_path= /etc/resolv.config while IFS = read -r line do echo $line done < "$file_path"

Output:

Example #2

Let us have a look at how we can use while loop to run a program or display a program for an infinite number of times can be seen as below:

Code:

while : do echo " hello, need to enter ctrl+c to stop" done

Explanation to the above code: In the above example, there is no condition in the while loop so it always evaluates to true and body of the loop will execute continuously until we enter ctrl+c to stop the while loop. The echo statement will display infinite times until we press ctrl+c.

Example #3

Let us write a while loop to calculate the factorial of a given number and display it on the console.

Code:

counter=$1 factorial=1 while [ $counter -gt 0 ] do factorial=$(( $factorial * $counter )) counter=$(( $counter - 1 )) done echo $factorial

Output:

Explanation to the above code: In the above program we are trying to calculate the factorial of a given number. We are assigning argument 1 to the counter variable and assigning factorial to value 1 and checking the condition whether the counter is greater than 0 if it satisfies then perform the operations in the body of the loop until the loop terminates and final displays factorial result.

Conclusion

Finally, it’s an overview of while loop in shell scripting. So far we have discussed what is while loop, while loop syntax, the flow diagram of the while loop, how while loop works in shell scripting, examples of while loop and its outputs. I hope you will have a better understanding of the while loop after reading this article.