Trending December 2023 # 3 Ways To Make A Yarn Pompom # Suggested January 2024 # Top 19 Popular

You are reading the article 3 Ways To Make A Yarn Pompom updated in December 2023 on the website We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested January 2024 3 Ways To Make A Yarn Pompom


Use a cup to trace a circle onto a piece of cardboard. This will create the base for your pompom maker. If you want a really big pompom, you can use a small bowl or even an old CD or DVD.[9]


Trace a smaller circle inside the first one. The circle should be ½ to 1 inch (1.27 to 2.54 centimeters) wide. The bigger your outer circle is, the bigger your inner circle should be. Avoid making the inner circle too big, however, or you’ll have a hard time tying your pompom together.


Cut the circles out using a craft blade. Cut your larger circle out first, then the smaller one. You will end up with something that looks like a doughnut. If you are a child doing this craft, ask an adult to help you with this step.


Cut a ½-inch (1.27-centimeter) wide slit into the doughnut. The slit needs to go from the outer edge straight down to the inner edge. This will make wrapping the yarn around your doughnut easier.[10]


Use your doughnut to trace and cut a second one just like it. Stack the doughnuts one on top of the other, and make sure that the slits are aligned. You will be treating these as one doughnut until the very end.[11]


Start wrapping the yarn around your doughnut. The easiest way to do this would be to start at one edge of the slit, going all the way around your doughnut, and finishing at the other edge of the slit.


Keep wrapping the yarn, back and forth, across your doughnut until the center hole is full. Try to wrap as evenly as you can, and not so tightly that the cardboard starts to twist and warp.[12] If you’d like, you can switch yarn colors to create a more interesting-looking pompom.[13]


Cut the yarn. Snip off the excess yarn first, then slid your scissors between the yarn and the cardboard. Pull your scissors towards the edge of your doughnut, and start cutting through the yarn. Hold your yarn together, and don’t let it come apart.


Cut a long piece of yarn, and tie it around the middle of your yarn bundle. Separate your two cardboard doughnuts enough so that you can slide your yarn in between them. Tie the ends of your yarn into a tight knot. Wrap them back in the opposite direction, then tie them into a tight, double knot.[14]

You can choose to snip off the excess pieces of yarn, or you can tie the ends into a loop so that you can hang it.


Carefully pull the cardboard doughnuts off of your pompom. If you need to, you can tear them to make things easier, but keep in mind that if you do that, you won’t be able to reuse them.


Fluff up the pompom. You can do this by gently going through it with your fingers. You can also roll it between your palms instead. Don’t worry if a few pieces of yarn come out.


Neaten and even your pompom out. Your pompom might still have some scraggly bits coming off of it, especially after all that fluffing. Rotate the pompom between your fingers, and snip off any long pieces of yarn that stick out.


You're reading 3 Ways To Make A Yarn Pompom

3 Ways To Make A Booklet From Paper

Next, unfold your paper completely and lay it in front of you. If you’re using paper that’s patterned on one side, you want theside facing up (if you’re not using patterned paper, this is the side that was inside your “doors” earlier). If necessary, turn the paper so that the “X” folds run along the bottom edge. Fold the lower part of the paper underneath using the horizontal crease near the bottom of the page.

Grab the top edge of the folded paper and fold it across itself diagonally. Line the crease you just made up with the central crease running down the center of the doors vertically and press to fold. Your paper should look like an upside down, rotated letter L.

Here’s where things get chúng tôi start following along with the video below if you get lost. Take the skinny top edge of your folded “doors” and fold it down so it reaches halfway to the center crease running through your “doors” horizontally. In other words, you’ll want to put a valley fold one sixth of the way down the length of the doors.

Turn your paper once again so that your original set of folds are once again pointing vertically. Fold the edges inward, “accordion-ing” the paper along the vertical folds as you chúng tôi the final fold in the center of the paper — leave this unfolded. Your paper should look like a long, skinny set of double doors at this point. Your folded piece of paper should be one-fourth as wide as it would normally be.

Next, turn your paper 90 degrees so that the previously vertical folds run horizontal. Unfold these folds and make one new one to divide the paper in half vertically. Use a “valley”-style fold (one that points away from you).Your fold should intersect the folds you’ve already made at perfect (or nearly perfect) right angles.

Next, make four more vertical folds to divide each of the tall, skinny sections of the paper in half. These folds should pointyou (“mountain”-style), rather than away from chúng tôi you’re done, you should be left with a piece of paper that’s divided into eight skinny strips that fold together in an “accordion” pattern.

Divide the paper into fourths. Lay your paper flat in front of you (if you’re using patterned origami paper, you want it white side -up). Fold the paper in half vertically, then fold the outer edges inward to the center and crease. When you’re done, your paper should be divided into four tall, skinny, equal sections with three folds that point away from you (or “valley” folds).

This method requires trickier folds than the ones above, but leaves you with an elegant, professional-looking booklet if done correctly. To make your job easier, it’s useful to use square pieces of origami paper for this project. Technically, any square piece of paper will work, but origami paper is usually thin and relatively easy to fold. Plus, it often has patterns or designs on one side which can create great-looking covers.


Kink each triangle in half and fold. Fold each of the small triangles at the bottom of the paper inward to divide it in half. Start at one end and fold the rest of the paper around each fold as you go. Press the folded triangles together accordion-style until your entire piece of folded paper looks like a very long, skinny letter L.


Use a diagonal fold to make a backwards J shape. Take the long, skinny end of your “L” and make a 45 degree fold to bring it up and over itself. Leave a small gap between the lower part of the “L” and the fold you make. When you’re done, your folded-up piece of paper should look like a backwards letter J. Fold the interior of the J shape in upon itself to give the bottom of the J 45 degree angles all around.


Open up the skinny part of the J and fold it back over itself. Carefully open up the accordion-ed folds of the long, narrow part of the J shape to reveal a wide “cape” shaped section of paper. Fold this back over itself, turning it 90 degrees as you do so. Line your fold up with the paper behind it. Then, fold the upper section of the paper back over itself once more in the opposite direction.


Turn the paper over and fold the bottom of the paper up. If you’re working with patterned paper, after you flip it over, your paper should now look like a wide, fat cape or glider with patterned “trim” at its edges. Fold the bottom edge of the paper over itself with a narrow fold — you want to create no more than a quarter inch strip of doubled-up material at the bottom.

Fold the top of the paper down to form a rectangle. Grab the top edge of the paper and fold it down over itself until it’s almost (but not quite) level with the bottom edge. Your folded paper should now be in the shape of a long, skinny, horizontal rectangle. If you’re using patterned paper, the entire rectangle should be patterned.


Fold the outer edges of the paper in towards the “pages”. Your booklet should now be starting to take shape. In the middle of your rectangle, there should be a small “tab” of tightly-folded square segments of paper that fan out from a central point where they all meet. These will form your booklet’s pages. To make your booklet’s covers, fold the outer edges of the rectangle in until they meet the base of the pages and fold to crease. When you’re done, there should be a tab of paper at each end of the inner tab of pages that’s slightly larger than the pages themselves.


If desired, glue your covers in place. Congratulations! If you’ve made all of your folds correctly, when you’re done, your tiny booklet should have ten pages and a front and back cover. If you want to, at this point you can carefully glue or tape the flaps that form the covers of the book down to secure them in place. Your booklet is now ready to use!

Alternatively, for true origami authenticity, try sliding the lower tab of each cover flap into the pocket along the back of the book. This secures each cover in place without the use of adhesives, which any origami master wouldn’t be caught dead using.


3+ Awesome Ways To Make Sense Of Firefox Tabs

If you are an active Internet user (which I bet you are), you probably always have numerous open tabs in your FireFox at the same time. Trying to make sense of them and find the one you need often takes time and frustrates. So in this SEO productivity post I am sharing a few tips to better organize and quicker access your browser tabs.

I have once looked at a few really useful FireFox shortcuts (as well as those FireFox shortcuts that are especially useful for SEOs); so here are a few more to switch between tabs (Windows, for other OS shortcuts please visit the official page):

CTRL+Number (CTRL+1 … CTRL+8) switches between corresponding tabs (Unfortunately I often have more than 8 tabs opened in the browser).

CTRL+9 shortcut always opens the very last tab.

Ctrl+Tab or Ctrl+Page D own: switch to the next tab.

Ctrl+Shift+Tab or Ctrl+Page Up: switch to previous tab.

Ctrl+T: open a new tab.

Ctrl+W: close the current tab.

Ctrl-Shift+T: undo close tab.

Tab Navigator

TabNavigator is an awesome FireFox addon that allows desktop style tab navigation. What it basically means is that you can navigate between your active tabs using a shortcut {ALT+r}. Moreover, it allows to guess the target tab by showing you the domain favicon.

Colorful tabs

“Colorful tabs” (by Binary Turf) colors every tab in a different color and makes them easy to distinguish “while beautifying the overall appearance of the interface”.

While the addon really makes your browser look more appealing, it has a really cool feature that lets you specify the separate colors for each domain. This makes identifying each site easier.

To access the feature:

Choose “Colorful tabs” and then “Options”

In “General” tab choose “Generate colors by domain hostname”

Go to “Presets”

Put a tick on “Enable Preset Domain Colors”

Add unlimited number of domains and set colors!

Next Tab

Naturally, we want all related tabs grouped together. So when you are a opening a new tab, you might want to open it right next to the current tab.

Next tab 0.2.3. gives you an awesome ability to open the link in the new tab next to the current one.

3 Ways To Draw A Cute Puppy

Gather your pencils. You will need a 6B pencil, which is used for shading in extra-dark areas. You will need a hard 4H pencil for softer shading. Know that the harder the pencil, the softer the line will be. For hatching and cross-hatching, you will need a 2H pencil. For mid-tone areas, use an HB pencil.

At this point, everything is sketched in very lightly using a 4H pencil, which is one of your softer pencils.

Shade the pupils in with a 6B pencil. This will make them really dark. Only use this pencil for dark areas; otherwise it’s too hard to erase when you need to.


Gauge where you think the nose should be in proportion to the eyes. Sketch it in the shape of a roundish-looking heart. Make it about the same size as one of the eyes. If you realize later that it’s not exactly where it should be, you can always redraw it later.

Draw the muzzle around the nose. Make it in the shape of a half-open circle with the open part on the top. Leaving it open will allow you draw the rest of the muzzle. Leave plenty of space around the nose that you just drew above.

Draw the rest of the nose/muzzle area. On one side of the half-open circle, start drawing a long, oblong shape. It will come up along one eye. When you reach the top of the head, cross over to the other side and back down. It will connect to the other side of the half-open circle.

Sketch two oblong shapes for the eyebrows. Place them directly over the eyes. You want them to tilt down towards each other. They almost look like two puffy clouds.

Draw the outline of the head, mouth and ears. Take a look at where the eyes are to determine where to start to draw the head. You don’t want it too close to the eyes or too far. When you’ve sufficiently visualized where to begin, start to draw the head.

It’s fine to use multiple, sketchy strokes for this rough draft. In other words, if the lines overlap, it’s okay.

Sketch the ears. Starting at the top of the head on one side, draw a puffy, oblong shape (almost like a half-donut). The bottom of it will stop at about the same height as the nose. Sketch the other ear.

Begin with the left ear. Shade it in with hatching and cross-hatching strokes, leaving a few white areas. With the same method, shade in the top part of the heart-shaped head. For the right ear, just shade in the left-third of it and finish with a few curvy, soft lines in that area.

Visualize how hair grows in a particular area, and sketch in the same direction. A 2H pencil works best for this.

Use soft, light strokes when shading. For extra-dark areas, use a 6B pencil, which is very soft.

For any shapes that you think are off, this is the time to redraw them.

Add your own unique touches now to turn it into the world’s cutest puppy.


3 Ways To Do A Playstation 5 (Ps5) Console Update

Running the latest system software version on your PlayStation 5 is crucial for a smooth and hassle-free gaming experience. Because of that, the console automatically checks for new updates, informs you about new releases, and even installs them when you aren’t playing.

However, if automatic updates aren’t enabled on your PS5 or the console fails to notify you about new system software releases (yes, that happens), you need to take matters into your own hands. Fortunately, updating a PlayStation 5 console is a straightforward process that can be done in several ways.

Table of Contents

In this walkthrough, we’ll explore several ways to update your PS5, from updating the console over the internet, and installing the latest firmware manually via USB, to applying system updates through Safe Mode.

Method 1: Update PS5 Over the Internet

A direct PS5 system software download over the internet is the most convenient way to get the console up-to-date. It’s quick and easy if you have access to a moderately fast Wi-Fi or Ethernet connection. Just quit any PS5 games, and then:



on the top-right corner of the PS5’s Home Screen.

Enter the




Update System Software



Update Using Internet

. That should prompt your PS5 to connect to Sony’s servers and check for new updates.

If there’s a pending update, select the


button to download and install it. Select the View


button if you want to view the update’s patch notes.

The PS5 should automatically restart and download and install the update.

Warning: Do not turn off the PS5 during installation. The console may rebuild its database as part of the update procedure, so be patient.

The console will restart again. A “The system software update is complete” notification should appear on the Home Screen as confirmation that the console is up-to-date.

Sometimes, the system software update on your PS5 may fail during or after a download. To restart the system software download or installation:

Select the system software update and choose

View Error Info.


Try Again


Method 2: Update PS5 via USB Drive

If you’re having trouble connecting your PS5 to the internet, you can download the update onto a FAT32/exFAT-formatted USB flash drive and install it on your console that way.

Format the USB Drive in FAT32/exFAT

You must begin by formatting the USB flash drive in the FAT32 or exFAT file system. If it already is, skip to the next section.

Warning: You’ll lose all data on the USB flash drive, so back up anything important before you format it.

On a Windows PC:

Connect the USB drive to your PC and open File Explorer.

Open the pull-down menu next to

File system

and select




Check the box next to

Quick Format





On a Mac:

Connect the USB drive.

Select the USB drive on the sidebar and choose



Set the










Download the PS Update File to USB

After formatting the flash drive, you must download and copy the PS5’s system software file into it.

Open the USB drive via File Explorer or Finder.

Create a folder labeled



Open the


folder and create a sub-folder labeled



Download the latest PS5 system software update file from the official PlayStation website. It should weigh around 1-1.5 gigabytes.

Copy the downloaded


file into the


subfolder on the formatted flash drive.

Eject the flash drive from your PC or Mac.

Perform the PS5 System Update via USB

You can now update your PS5 via the USB drive. To do that:

Connect the USB drive to a USB port on the front or back of the PS5.


Update from USB Drive


Your PS5 should automatically detect the PS5 console update file, copy it to the internal SSD, and use that to update the system software to its latest version. Do not turn off the console during the middle of the update.

Method 3: Update PS5 in Safe Mode

Updating your PS5 in Safe Mode is useful when experiencing problems with the standard update methods above, such as repeated failed updates and intermittent system crashes.

Like updating your PS5 in normal mode, Safe Mode lets you choose between updating the console over the internet or via USB. If you opt for the latter, set up a USB flash drive using the instructions above.

Connect the DualSense controller to the PS5 via USB.

Press and hold the


button until the console beeps twice. You should see the console boot into Safe Mode shortly.

Press the

PS button

on your DualSense wireless controller.


Update System Software

using the




D-pad buttons—thumbsticks don’t function in Safe Mode.


Update Using Internet

. If that fails, connect a USB flash drive with the PS5 system software update file and try the

Update from USB Drive


Your PS5 Is Now Up-to-Date

Whether you’re a casual gamer or a seasoned pro, keeping your PS5 console updated gives you access to new features, enhanced system performance, and improved gameplay. Remember to also run new firmware updates on your DualSense wireless controller.

3 Ways Android Nougat Is A Must For Multitaskers

The latest version of Android packs the usual raft of new features, but none are as flashy as its revamped multitasking abilities, especially the new side-by-side view that lets you use two apps at once.

Nougat also adds a couple of other essential new multitasking features: the ability to quickly switch between the current app and the last one you were using, as well as a one-tap method for closing all your multitasking windows at once. Let’s give the trio a try.

How to put a pair of apps side-by-side

Until the arrival of Nougat (which will slowly make its way to Nexus handsets and other Android devices following its late-August release), multitasking on an Android phone or tablet was an almost-but-not-quite affair.

Ben Patterson

You can arrange your multi-window apps lengthwise or one on top of the other; also, note the split multitasking button at the bottom of the screen.

Sure, you could quickly switch between apps by tapping the multitasking button, and a few specific apps (such as Google Docs for Android) offered some limited side-by-side window features.

Once you install Nougat on your Android device, though, you’ll finally get some true multitasking power, with most Android apps able to run side-by-side on the same screen.

Launching Nougat’s “multi-window” view is easy: Just open an app, then tap and hold the multitasking button. A new window will open in the bottom half of the screen, showing all the other app windows you have open; pick one, and it’ll expand to fill the second window.

You can drag the window divider back and forth to expand or shrink the two windows, and you can also turn your device to landscape view to arrange your apps lengthwise rather than top to bottom.

Ben Patterson

Just drag the divider to resize your multi-window apps, or close an app by dragging the divider to the edge of the screen.

To pick a new app for the second window, tap the multitasking button (which, you’ll see, will now have a new, split-screen icon), then choose an app from the familiar multitasking view.

Most of Google’s native Android apps work like a dream in Nougat’s multi-window view, although some third-party apps (like Facebook and Twitter) will give you an “App may not work with split-screen” warning before squeezing into a smaller window. Still other apps (like Instagram and Reddit) won’t work side-by-side at all, or at least not until their developers add multi-window support.

When you’re ready to go back to normal view, just tap and hold the multitasking button one last time, or drag the window divider all the way to one side or the other.

Jump between your two most recent apps

Switching from one app to another doesn’t always feel as quick as it could be, even when you’re using Android’s multitasking view to make the switch. Tapping the multitasking button is easy enough, but you almost always need to pause to make sure you’re picking the right app window.

Ben Patterson

Just double-tap the multitasking button to quickly switch between the last two apps you’ve been using.

That’s where Nougat’s new “quick switch” feature comes in handy. Just double-tap the multitasking button to switch instantly to the last app you were using, then double-tap the button again to return to the first app—perfect for those of us who need to quickly switch from, say, a login screen to a password manager.

Close all your app windows at once

Android does a pretty good job at managing your handset’s memory and app resources, meaning there’s generally no need to close an app window unless you want to restart an app, or because (like me) you just get antsy seeing too many apps open at the same time.

Ben Patterson

Thanks to Nougat, there’s finally an easy way to close all your open app windows at once.

Still, someone at Google HQ must share the obsessive-compulsive need of some of us to keep Android’s multitasking screen as tidy as possible, because Nougat boasts an easy, one-tap way to close all your open app windows at once.

Just tap the multitasking button, then scroll all the way to the top of your various open app windows. Perched up in the corner of the screen, you’ll see a Clear All button.

Tap it, and whoosh—all your open app windows will close and slide away, leaving you with a completely empty multitasking screen.

Update the detailed information about 3 Ways To Make A Yarn Pompom on the website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!