Trending February 2024 # 10 Troubleshooting Tips If Your Internet Is Connected But Not Working # Suggested March 2024 # Top 11 Popular

You are reading the article 10 Troubleshooting Tips If Your Internet Is Connected But Not Working updated in February 2024 on the website Bellydancehcm.com. We hope that the information we have shared is helpful to you. If you find the content interesting and meaningful, please share it with your friends and continue to follow and support us for the latest updates. Suggested March 2024 10 Troubleshooting Tips If Your Internet Is Connected But Not Working

While many people think of the internet as “WiFi” it’s actually just a final bridge between your device and the actual internet connection you’re using, whether that’s copper-based DSL, fiber, satellite or smoke signals. This means it’s entirely possible for the connection between your computer and the WiFi router to be successful while the internet connection itself is down. 

There can be more than a few reasons why this happens and we’re going to run through some common troubleshooting tips to use if your internet is connected but not working.

Table of Contents

Narrow Down The Culprit

There are a lot of links in the chain between you and the internet at large. If any one of them aren’t working properly then you’re likely to be cut off from the net. Which makes it pretty important to work out where exactly the issue is. That means you’ll know what to fix or whether the problem is within your power to solve at all.

Try to isolate each section of the system:

Is it one specific website that doesn’t work?

Is it only one device on your network that can’t use the internet?

Does the router’s indicator light show a connection to the internet?

By answering questions like these, you can cut out a lot of troubleshooting work wasted on aspects of the connection that have nothing to do with the problems you’re experiencing. This will also help you decide which (if any) of the tips below you can skip.

Restart Your Device

This one solution if your internet is not working is quick and easy to do. Whether you’re on a computer, tablet, smartphone, smart TV. fridge or internet-connected burrito, try restarting the device. Sometimes temporary glitches develop that we can’t find or resolve manually. A fresh start can help eliminate those. 

If you find your device’s internet connection issues frequently need to be resolved with a restart, you may want to look into operating system or firmware updates, since it could be a systematic issue.

Are You Connected To The Right Router?

There are no such things as dumb questions, even though this might seem like one. Just double check that you’re connected to the WiFi connection you think you are. For example, you may have accidentally connected to a mobile hotspot you forgot to turn off. 

Another common issue happens with dual-band routers, which offer a 2.4Ghz and 5Ghz WiFi network under two separate names. 5Ghz WiFi isn’t great at long distance transmission, especially through walls. If your device fails to switch over to the 2.4Ghz network when the signal drops too low, you won’t have a working internet connection. So change to the 2.4Ghz network manually to resolve this.

Do You Have Good Signal Strength?

Following from the previous point, do you have enough signal strength regardless of the network frequency? If your internet connection starts working again when you move close to the router, consider using a WiFi extender or repeater of some sort.

Check, Reset Or Restart Your Router

If the internet connection issue affects all of the devices connected to the router, you should definitely pay some attention to the router itself. Before doing anything drastic, check if its WAN light is lit. If not, the router has no connection to the internet and your ISP is probably at fault.

Start by simply unplugging it, waiting a minute and then plugging it in again. Routers are really just specialized computers and they can hang, crash and misbehave just the same as PCs.

You might also need to try a hard reset of your router if all else fails. Refer to its manual on how to do this. It’s usually a recessed button you have to hold in for a few seconds. You will have to re-enter all the settings for your ISP, WiFi network password and the like however. Be warned!

Switch Between WiFi & Ethernet

If WiFi isn’t working properly, but a direct Ethernet cable connection does, that’s a sign it’s a WiFi related issue. If all devices struggle over WiFi, look for general WiFi problems and refer back to the above on resetting your router. 

If it’s only one specific device that won’t work over WiFi (but works with Ethernet) you’ll have to troubleshoot its WiFi specifically.

DNS Cache Problems

One quick fix if the internet is not working is to flush your DNS cache. Every time you type in the address of a website, your computer sends a request to a Domain Name Server to have it translated into the IP (internet protocol) address of a specific server. 

Your computer’s DNS cache stores the information of sites you’ve visited before to speed up your internet experience. The problem is that if something goes wrong with the cache, you might lose access to the site. 

To flush the cache:

Open the Start Menu

Type CMD and run the Command Prompt app

Type ipconfig /flushdns and hit Enter

That’s it, your DNS cache is now emptied and if that was the problem everything should work again.

Use Alternative DNS Servers

Sometimes internet access issues are caused by the DNS servers themselves being unreliable or down. Most internet service providers run their own DNS servers and will configure them through the router by default.

You can change which DNS servers your specific device or router uses so that you always use a faster or more reliable choice. For more information on how to change DNS servers in Windows, please refer to How To Change Your DNS Provider In Windows.

IP Address Conflicts

Every device on your local network has a unique IP address assigned to it by your router, assuming that your router and devices are set up to use dynamic IP assignment. This is the default, but in some circumstances a device or the router itself has been set up to use static IP addresses. 

There are plenty of reasons to use static IP addresses, but if two devices on the network happen to be configured to use the same address, neither can use the network.

Resolving IP address conflicts really needs an article all to itself and, wouldn’t you know it, we happen to have just such an article. So if you think there might be an IP address conflict on your network, check out How to Fix an IP Address Conflict.

Check Your ISP For Downtime Or Reset Your Connection Remotely

You’ve reached the last troubleshooting tip and your internet is still not working. It’s not a specific device, it’s not your router, nothing in your local domain seems to be to blame. Well, that only leaves your actual internet service provider.

The good news is that many ISPs will put notices about downtime on their websites, which you can check using a mobile phone or someone else’s internet. You can also simply phone them and ask if there’s a known issue at their end.

Even if there isn’t one, sometimes you can fix issues by requesting a network reset from the ISP side of things. This may be possible to do through self-service on their site or you’ll have to request it using a support ticket. If that still doesn’t work, keep them on the line for some much-needed technical support!

You're reading 10 Troubleshooting Tips If Your Internet Is Connected But Not Working

6 Quick Tips To Fix Your Laptop Camera If It’s Not Working

6 Quick Tips to Fix Your Laptop Camera if it’s not Working Reinstalling the device driver is usually a fast fix to try

17

Share

X

If the

integrated camera is not working

, the most likely trigger is driver-related issues. 

In some rare cases, you may have faulty hardware that will require a replacement. 

Also, if the

built-in camera is not working,

you must ensure that any webcam protection software is properly configured. 

X

INSTALL BY CLICKING THE DOWNLOAD FILE

To fix Windows PC system issues, you will need a dedicated tool

Fortect is a tool that does not simply cleans up your PC, but has a repository with several millions of Windows System files stored in their initial version. When your PC encounters a problem, Fortect will fix it for you, by replacing bad files with fresh versions. To fix your current PC issue, here are the steps you need to take:

Download Fortect and install it on your PC.

Start the tool’s scanning process to look for corrupt files that are the source of your problem

Fortect has been downloaded by

0

readers this month.

There are many uses for the laptop camera, but most people use it to take photos or hold video chats like Skype or Google Hangouts, among other uses.

But the laptop camera may not always launch or work as it is ordinarily intended. As one would expect, videoconference-focused apps are prone to be more impacted than others. Thus, issues with laptop cameras not working on Teams or on Zoom are frequent.

Why is my camera not working on my laptop?

On your Windows 10 devices, there are a few reasons why the camera may not work. The top triggers for this problem include:

Driver-related issues – This could be missing drivers after an update or old and corrupted device drivers.

Compatibility with the antivirus program – In some cases, users have found out that the antivirus program blocks the camera. Hence you should use only the most compatible Windows 10 antivirus software.

Problems with the system settings – In some cases, the apps do not have the authority to use the camera; when that is the case, it will not turn on.

Hardware issues – You may simply be dealing with a bad camera and will need to replace your webcam.

Now, moving on with our guide. Here are solutions to help you fix your laptop camera when it just won’t work, so read on!

How to fix my camera on my laptop? 1. Run the Hardware troubleshooter

Follow the on-screen instructions to run the Hardware and Devices troubleshooter. The troubleshooter will begin detecting any issues.

If you’re experiencing problems with your PC’s recently installed device or hardware, then run the Hardware and Devices troubleshooter to resolve the issue.

This checks for commonly occurring issues and ensures any new device or hardware is correctly installed on your computer.

2. Update the laptop camera driver

You can repair the laptop’s camera just by updating your web camera driver. Plus, it’s possible to perform this action from Device Manager as presented down below.

4. When prompted to choose How do you want to search driver, select Search automatically for updated driver software.

Finding the right driver can be a difficult task. Therefore, we recommend you use an automatic driver tool to scan your PC for out-of-date or missing drivers and automatically update them.

Dedicated driver updaters will match your hardware with its corresponding driver, eliminating additional problems that can occur when using a mismatched driver.

A dedicated tool that helps you find the precise and latest updates for all your drivers.

Free trial Visit website

3. Reinstall the laptop camera 4. Roll back driver 5. Check your antivirus software

If your laptop camera doesn’t work or open, or you get an error saying that the laptop camera cannot be found or cannot start, it may be caused by antivirus software that is blocking it or an outdated webcam driver.

6. Check the camera privacy settings

The solutions above will work if the laptop camera is not working and showing a black screen. They will also come in handy if the laptop camera is not working but the light is on, or if it is not working with services like Google Meet, Teams, or on Zoom.

This article will also help you fix the following camera errors:

Error code 0xa00f4271 – It manifests itself when you are trying to use your webcam

0xa00f4244 No cameras are attached error – This happens when the Camera app can’t detect your webcam properly

Error 0xa00f4292 – Corrupted or missing drivers are the root of this issue, but our guide will help you fix it as well

Laptop camera not working in Windows 10, 11, 7, 8 – The solutions above are applicable to all OS iterations.

HP, Dell, Lenovo, Asus, Acer, MSI laptop camera not working – Update the laptop camera drivers on all laptop brands in order to fix this.

Laptop camera not working on Zoom, Teams, Google Meet, Discord – Check if the apps have the right to access your camera.

Still experiencing issues?

Was this page helpful?

x

9 Ways To Fix Android Connected To Wifi But No Internet

The first thing you shall do is disconnect and reconnect to the WiFi network. It may sound very basic, but it fixes about half the Wifi-related problems on Android. So, if your phone is not connecting to the internet even after having an active WiFi network, turn the WiFi toggle off and on again to see if it fixes the problem.

This solution is just an upgraded version of the above fix and works most of the time. All you have to do is forget the WiFi network you are connecting to and then try connecting back to it again.

3. Tap Forget and to forget and disconnect the WiFi

Now, connect back to the WiFi network. Ensure that you enter the correct password; otherwise, it’ll keep showing “Connecting, Saved” and won’t connect to the WiFi. If you can’t remember the password, here’s how to see the connected WiFi passwords.

All internet providers have a web-based dashboard or an app to connect and manage your Wireless broadband account. You can see if the connection is active or not by login into your dashboard. In my case, you can see that the Excitel service and connection are active.

Alternatively, you can also check the indicator lights on the router to see if something’s abnormal. There can be downtime from the internet service provider as well. Call your ISP’s customer care to check if there’s any problem with their services in your area.

Restart the Router

Turn Off Traffic Control

Open the browser on your computer and navigate to the router’s dashboard. Go to the Advanced tab and select Traffic Control. Disable it if turned on and check if the internet starts working on your phone.

Reset the Router

The other option is to reset the router. Doing so will reset all existing settings and configurations and start it with the factory defaults. Usually, the routers have a reset hole where you can insert a SIM ejector tool to trigger the reset.

Update the Router Firmware

Is there a firmware update available for your WiFi router? If yes, log in to your WiFi dashboard and allow the software update. Doing so may fix router-specific connectivity and performance issues or bugs that have been identified by the manufacturer.

Related- 6 Ways to Fix Android Can’t Connect to Wifi But Says Saved, Secured

DNS servers help translate the website links into IP addresses. If the internet is not working on your Android phone despite being connected to WiFi, it could be an issue with the domain server of your internet service provider.

Switch to Google DNS

1. Open Settings on your phone.

2. Head to Network & Internet.

5. Next, enter dns.google in the hostname field. Tap Save.

Switch to Cloudflare DNS

Alternatively, you can switch to Cloudflare DNS by entering chúng tôi or chúng tôi . You can also use the Cloudflare app to enable it:

1. Install the 1.1.1.1 app from Google Play Store or App Store.

3. Tap the Menu and select 1.1.1.1.

4. Then, go back and enable the toggle.

Change DNS Settings for WiFi

Changing the DNS using the above methods will also override for WiFi. However, you do have the option to change DNS in WiFi settings separately. This can fix the WiFi connected but no internet connectivity message. To do so:

1. Go to WiFi settings and tap the WiFi name.

3. You can now enter a custom DNS address in DNS1 and DNS2.

Another thing that you should check is the date and time on your phone. Incorrect data and time settings may cause issues. To fix it:

1. Open Settings on your Android phone.

Your phone will automatically sync and adjust the time based on your network and location.

For some users, enabling MAC Address Randomization in Developer Options fixed the WiFi connected no internet issue on Android. When you turn it on, your Android’s MAC address will change every time you connect to a network.

To enableMac Address Randomization:

4. Enable the toggle for WiFi Non-persistent MAC Randomization.

Android 12 comes with a shortcut to reset the internet on phone. Using it, you can quickly reset your current connection settings and refresh your Wi-Fi network, as shown below:

Your Android phone will now refresh the WiFi and mobile data connectivity on your phone and then reconnect to the most recently used or preferred local network.

Here’s how to do it:

4. Tap Reset Settings to confirm.

Your saved WiFi passwords, Bluetooth connections, and mobile network settings will be reset. You will now have to reconnect to the WiFi network.

Uninstall or pause any app which modifies or tweaks network settings on your phone- including VPN, firewall, or DNS-changing apps.

Factory reset your Android phone. It will reset all the data including personal files, so make sure to take a prior backup.

Check if other devices are experiencing the same problem. If yes, contact your ISP.

This is how you can diagnose the situation where your phone is connected to Wi-Fi but has no internet. These fixes will most probably fix anything wrong with your network devices but if none of those worked for you then you have to contact your internet provider for help.

You can also follow us for instant tech news at Google News or for tips and tricks, smartphones & gadgets reviews, join GadgetsToUse Telegram Group, or for the latest review videos subscribe GadgetsToUse Youtube Channel.

Is Your Wireless Mouse Not Working? Try These Fixes

A Wireless mouse is a little more complex than a standard mouse that plugs into the computer. Since they require a wireless connection, they’re prone to interference and USB dongle problems.

The problem with your wireless mouse may not be apparent at first glance, but a little investigation will help identify it so you can solve it. 

Why is My Wireless Mouse Not Working

Most problems with wireless mice have to do with the method you use to connect them to the computer. Unfortunately, something as simple as a loosely-inserted USB dongle can keep the computer from recognizing the mouse.

Even if the connection is made, specific problems might prevent it from holding the connection. On top of that, issues with the mouse itself can keep it from working even if the wireless connection is stable. 

How to Fix Wireless Mouse not Working

Approach troubleshooting your mouse from a logical perspective to make it as simple as possible. For example, if the mouse can move on the screen, the connection is probably working, and one of the keys on the mouse might be broken. If it works in one program and not another, check program settings before troubleshooting the mouse. 

Of course, the source of the problem can always be something you don’t expect. But using a logical progression to pinpoint it can help save you some time along the way. 

Interference Issues

Certain surfaces can cause wireless signal interference. The connection between your mouse and the computer is weakened or prevented by some problem. There are a few different sources of interference to consider.

Distance is a significant source of interference. If you try to use the mouse too far from the computer, the wireless connection simply won’t happen. While some mice can operate with 30 feet between the device and the computer, that distance is often shortened by other sources of interference.

Physical barriers are another significant source of interference. Walls, metal surfaces, and other impediments can keep the signal from reaching your computer. If you have a large metal desk that you keep the computer under, that metal might be the reason why the mouse isn’t connecting to the computer.

Interference also comes from overcrowded wireless bands. Most devices, including mice, still operate on the 2.4 GHz band, even though 5 GHz and 6GHz bands are becoming increasingly popular.

Even household devices with wireless connectivity can use the 2.4 GHz band; some refrigerators connect to grocery shopping apps or Twitter, for example. The more of these devices you have, the more difficult it is for a mouse on the same band to have a clear connection.

To determine whether interference is the source of your wireless mouse woes, try to eliminate as many of them as possible. 

Place the computer on a solid flat surface with space for your mousepad. 

Turn off all other wireless devices in the area and those that work on the same band as your mouse. 

Plug the USB dongle into the computer.

Turn the computer on.

Turn the mouse on.

Attempt to use the mouse on the computer. If it’s working now when it wasn’t before, try it with different placement in your usual setup.

Unfortunately, problems with interference might require you to move your entire computing setup. There isn’t much you can do to mitigate the problem if that’s the root of your wireless mouse issues because the signal must reach the computer.

Experiment with different positioning until you find something that suits your space and still works with your mouse. If there aren’t too many wireless devices, the distance is close, and the barriers have been resolved, it’s probably another issue. 

Connection Problems

Connection problems can also come from an improperly connected dongle or mouse set incorrectly. You’d be surprised how often people forget they have to turn on their wireless mice! Check the mouse itself and the dongle that you put into the computer to make sure they’re ready to work. 

Flip your mouse over and make sure it’s switched on.

Remove the dongle from the computer.

Shut down the computer.

Plug the dongle into a working USB slot.

Restart the computer.

Try to use the mouse again.

You want to double-check that you’re seating the USB dongle firmly in the computer’s USB slot. A weak or shaky dongle can prevent your wireless mouse from working. Don’t shove it in hard, but do make sure it’s inserted before attempting to use your mouse. 

Power and Charge

Another issue that wireless mice experience is power and charge issues. Different brands use different power sources, but all wireless mice are rechargeable or run on batteries. If your battery charge is low, it might keep the mouse from working.

Don’t just grab batteries from a nearby remote and switch them into your mouse. Some devices can run on low battery power and still work even if the battery charge won’t give you the best performance in another machine. The best thing to do is replace the batteries with fresh ones to test whether that’s the issue.

If your wireless mouse is rechargeable, turn it off and place the charger in the port. Wait until it gets to 100 percent charge before you attempt to use it again.

Sometimes built-in rechargeable batteries start to lose their ability to retain a charge. If you’ve noticed that your mouse is working less and less between charges, it might be time to replace another one. At the very least, start shopping when the charge frequency gets inconvenient. 

Windows Settings Adjustments

There are two main things to concern yourself with on Windows regarding your wireless mouse. First is the driver installation and upkeep, and second, the mouse settings. A problem in either can cause your wireless mouse not to work.

Driver Installation and Upkeep

When you first connect your USB dongle to your computer and turn on your mouse, Windows should start to install the drivers. However, that isn’t always something that triggers exactly when it’s supposed to.

If you have the drivers on removable media or downloaded from the manufacturer’s website, install them. If not, follow these steps to have Windows search for a new device and drivers.

You can also scroll down to the listing for your wireless mouse in the Device Manager and search for new drivers. Out-of-date drivers can often create problems for peripheral devices.

If your mouse isn’t appearing in the Device Manager at all, it might not be connected to the computer. Every device Windows detects should be accessible there. 

Mouse Settings in Windows

You should also check your mouse settings, especially if your problem is related to erratic mouse movement. Sometimes adjusting your settings can improve its behavior or fix issues you didn’t know settings could create.

If you have misconfigured options, it might feel like your wireless mouse isn’t working right. At the very least, checking the settings gives you the peace of mind to know they’re correct. 

Computer Hardware Problems

Sometimes the problem with a wireless mouse is a computer hardware problem. I experienced this one, and it was very annoying to solve because it didn’t occur to me right away.

The motherboard on the computer I was using was never connected to the front USB ports on the computer tower. They weren’t getting any power. However, I didn’t realize that because it wasn’t a computer that I built myself. I plugged in a USB dongle and had no response from my wireless mouse or computer.

If any of your USB ports aren’t working for any reason, it can stop your wireless mouse from making the connection. Check your ports by connecting to other devices. Try different ports.

Each time, give your computer a chance to check for drivers and detect the mouse. You may find a port that works even if a few of them are damaged or disconnected. 

You can also try the wireless mouse on another computer to see whether it works or is broken. 

Common Problems with Wireless Mice Brands

Certain troubleshooting tips only apply to specific wireless mouse brands.

Logitech

The best way to manage your Logitech mouse is with G Hub, the brand’s peripheral device management software. Make sure to open G Hub and check to see that the software detects the wireless mouse. If you don’t have G Hub, download it from the Logitech Website to manage your mouse. 

Make sure you’re running the latest firmware in G Hub too. In 2023, a firmware update wasn’t pushed directly to G Hub users, and they had to download it manually. Doing so fixed a variety of problems with their products. 

If the Logitech mouse you’re using has a reset button, try to use it before troubleshooting the mouse. Hold the reset button for five seconds with the mouse on before attempting to use the mouse again. 

Razer

One fix Razer recommends for wireless mice that aren’t working is cleaning the tracking sensor on the bottom of the mouse with a q-tip dampened with isopropyl alcohol. Make sure to remove the dongle from the computer and turn off the mouse before starting.

They also recommend plugging in the dongle directly to the PC and not into a USB hub. 

If you’re having a calibration issue with a Razer wireless mouse, try to reset it.

Once you’re done, the mouse should be recalibrated. This is particularly good at fixing issues that feel like a laggy connection or something similar. 

Corsair

Corsair has a process you can use to reset a wireless mouse experiencing issues.

Frequently Asked Questions How Do I Reset My Wireless Mouse?

That depends on the brand. Not every wireless mouse has a reset protocol. Check your documentation or the manufacturer’s website for your specific model to see what options are available for you.

Why Aren’t Batteries Working in My Wireless Mouse?

If you’re using new batteries and it still isn’t working, check to ensure the battery area is clean and free of corrosion. Clean it off when the surface is dirty and let it dry thoroughly before inserting new batteries. If it still doesn’t work, you might have to start shopping for a new mouse. 

Can a Wireless Mouse Go Bad?

A wireless mouse will eventually stop working even if you treat it gently and don’t use it very often. The harder and more often you use it, the quicker it will reach the end of its life. 

What Is the Lifespan of a Wireless Mouse?

Why Is Internet Safety Important? (Tips For Being Safe)

The internet as we know it is almost thirty years old — thirty years! Maybe that’s a small portion of your life, maybe you’ve never known life without the web. Whatever the case, we all still need to take safety precautions when we’re on the internet.

Just because you feel comfortable with your knowledge of social media, online shopping, and online banking doesn’t make you immune to the dangers that are lurking out there.

Internet safety is not a joke. Let’s take a closer look at why it’s important, then discuss how to stay safe while surfing those giant web waves.

What Could Go Wrong with The Internet?

Not everyone is out to get us. The majority of people are good-willed, good-intentioned, and pretty honest. The problem is that it only takes one wicked person to cause pain, inconvenience, and even permanent damage to our lives. This is especially easy when it comes to the Internet. But how?

1. Identity Theft

This is one of the more popular cybercrimes, and it’s on the rise. By getting enough of your PII (personally identifiable information), a thief can pretend that they are you. Their next step: get credit cards or apply for loans in your name. Identity thieves can also create official government IDs in your name and steal your benefits.

If your identity is stolen, you could suddenly find yourself in an unexpectedly large amount of debt, bad credit, and other problems that might be extremely difficult to recover from.

2. Financial Theft

Online crooks can be very deceptive and good at what they do. Generally, their strategy is to get you to pay for something that isn’t real. They might ask you to transfer money to them, promising a big payback. They may also blackmail you, saying they have pictures of you that you would not want to be released. Finally, you might get a message that someone has control of your computer and will wipe its data if you don’t pay them.

3. Personal Safety

Physical safety is a concern that many, especially young people, don’t think enough about. Many of us grew up with social media and are used to putting our entire life stories out for all to see. While it’s fun and gives us a sense of self-worth, many dangers can come from providing too much information to unknown people.

Letting strangers know where you are going and when–it’s a disaster waiting to happen. Showing addresses, license plate numbers, and other important information give would-be creeps a chance to find out where you are. Sure, most people are good-natured. However, every stranger is a potential stalker or home invader. Don’t let strangers know where you are!

4. Family and Friends Safety

If you’re not concerned with your own personal safety, you should at least consider your friends and family. The same things that we mentioned above also apply to them. If you broadcast your friend’s and family member’s information and location, you could be putting them in danger as well.

5. Personal Property

I can’t say this enough: providing too much information on the internet is a bad thing. The same data that puts you and others in danger might help thieves steal your personal property. If they know when you’re not home, they’ll see an opportunity to break in and steal your stuff.

6. Catfishing and Psychological Abuse

I have witnessed this happen. When someone gets close to a “catfisher” and trusts them, only to find out they were being lied to, the result can be significant psychological damage.

Catfishing, or someone pretending to be who they are not, can be devastating. It can cause mental despair and anguish. It might influence victims to send money or provide personal information that can be used to harm others.

7. Exposure of Minors to Adult Materials

Tips for Being Safe on the Internet

We’ve seen some of the major concerns about using the internet. Now, let’s take a look at how to be safe while exploring it.

1. Always Know Where You Are

2. Don’t Rush

Take your time and make sure you know what you’re doing when on the web. If you’re signing up for something or purchasing from a new site, research it first to make sure it’s legit.

3. If It Seems Too Good To Be True, It Probably Is

That’s an old adage I learned from my father that he learned from my Grandfather. They were talking about financial deals in general—but this can be applied to the internet. Impossible-looking online deals or giveaways are usually cons. Their purpose is to get you to enter information. Be suspicious, and do your research before shelling out any personal data.

4. Storing Credit Card Info With Retailers And Others

Be leary of storing credit card info on retail websites or applications. If you make frequent purchases, doing so is tempting—it makes buying things so easy! But if someone can log in to your account, they can also buy whatever they want.

5. PII – Personally Identifiable Information

Be very careful giving your PII out. Try to do so only when absolutely necessary. Social security numbers, driver’s license numbers, birth dates, addresses are often not needed for most social media or retail accounts. And those pieces of information are what thieves will use to steal your identity. Keep them safe!

If a website forces you to provide a birthdate or address, change the numbers slightly so that thieves can’t get your real ones. If it’s not an official bank account or government-type account, never provide SSNs or other invaluable data.

6. Unknown followers

This is tempting for social media users who want as many followers as possible. The danger is, if you have followers who you don’t know, they could be someone who could cause you harm. It’s best to ensure that you know who your followers, friends, and associates are in your social media circles.

7. Too much information – Social Media

Don’t provide too much information about your daily life on social media. Letting everyone know where you are, where you are going, and what you are doing can be fun. Still, it can also provide a criminal with enough information to harm you, your family and friends.

Also, be careful that pictures do not provide unwanted information, such as addresses or license plate numbers.

8. Avoid Unscrupulous Web Sites

Sites that contain pornographic, unregulated gambling or contraband materials are the number one places to get into trouble on the web. Because they are tempting, they get people to provide information and place viruses or tracking software on your computer. Avoiding these types of sites can save you many headaches.

9. Use a VPN

A VPN or virtual private network can provide extra protection to your home network and computers in general. VPNs make it harder for hackers to get into your systems and get information such as IP addresses. SoftwareHow has comprehensive resources on web privacy here.

10. Parental Controls

If you have young children using the internet, it’s always good to have parental controls. Some can be set up on your network router or VPN. There are even apps that can do this. They help prevent your children from stumbling into sites that you don’t want them to see or experience. Find some great parental control resources here.

11. Follow Your Intuition

If something does not seem right or you are suspicious, there’s a good chance something’s wrong. Follow your gut.

Be cautious and make sure that you investigate whatever it is that you are doing. Don’t get caught up in a dopamine rush and do something that you regret later or let a “phishing” site lead you down a path that will end badly.

12. Passwords

As always, use strong passwords. Never give them out to anyone, and change them frequently. Passwords are the first line of protection for your accounts, networks, and devices. Want to learn more, or looking for a resource for storing your passwords safely? Read more here.

Final Words

Internet safety and security is, and always will be, paramount. The internet is a powerful and exciting tool that all of us will continue to use, but it’s just as powerful for those who wish to harm us. Keep safety in mind as you wander down the information superhighway.

Let us know what internet safety concerns you have. We would love to hear from you.

The Snipping Tool Is Not Working On Your Computer Right Now

The Snipping Tool is a screenshot tool that is built into Windows. It captures the contents of your screen and allows you to draw on it, you can then save or share your work. There have been reports of users being unable to use the Snipping Tool because it does not open when they try to open it. In this article, we will explain why Snipping Tool is not working, including the solution to it. This problem occurs with the following message when triggered:

The Snipping Tool is not working on your computer right now. Restart your computer, and then try again. If the problem persists, contact your system administrator.

What is the use of the Snipping Tool in Windows?

Snipping Tool is a very handy program that every Windows user should know how to use. It’s free and simple to use and can be accessed instantly by pressing the Print Screen key on your keyboard. This tool is great for teachers, students, web designers, developers, engineers, or anyone who wants to capture screenshots of anything on their screen.

You can use the snipping tool in Windows to capture a screenshot of a particular part of your screen. The options you have with the snipping tool depend on what version of Windows you are using. In general, you will be able to get a rectangular or free-form shape from what is on your screen and then get it saved as a file type that you desire.

The Snipping Tool is not working on your computer right now

If you find that Snipping Tool is not working on your computer, you can try the below suggestions to solve this issue:

Relaunch the Snipping Tool

Run System File Checker tool

Identify the conflicting software

Disable/Enable the Snipping Tool

Let’s now see them in detail:

1] Relaunch the Snipping Tool

Alternatively, you can close Snipping Tool and then relaunch it. By doing so, you won’t need to reboot your computer. The following steps can guide you through the process.

Open the Task Manager first.

Open the Snipping Tool once again.

The program should now work properly.

2] Run System File Checker tool

This problem can also occur due to the presence of corrupted system files and running the System File Checker tool will fix the issue. So, follow the below suggestions and see if it works:

Type cmd in the text box and press Ctrl+Shift+Enter to launch the command prompt as an administrator.

Inside the Command Prompt window, type the below command line press Enter to execute it

sfc /scannow

The procedure may take some time, so be patient.

So, if you want to do anything else while your system scans the text code, then you can do it. Once it successfully scans your Windows device, restart your computer and see if you can now open the Snipping Tool on your computer.

Read: Fix Snipping Tool This app can’t open error

3] Identify the conflicting software

A conflict between Snipping Tool and other software may lead to this issue. Therefore, you should check your computer for any problematic software, especially freshly installed programs, and disable them once you find them.

Select the search result to access System Configuration.

Switch to the Services once System Configuration has opened.

After that, mark the Hide all Microsoft services checkbox.

The next step is to select the suspected services, especially those associated with the newly installed software.

Once you restart your PC, see if Snipping Tool is working now in Clean Boot State, else you may need to manually identify and eliminate the offending software.

Related: A problem with Windows is preventing Screen Snipping from opening

4] Disable/Enable the Snipping Tool

In the case where none of the above methods work, we recommend disabling the Snipping Tool and enable it again. The following steps will show you how to do this:

Open the Start menu.

Type chúng tôi and press Enter to open Local Group Policy.

Why is Snipping Tool not working?

These are the main reasons why the snipping tool may not work on your Windows PC.

A change in the default save path has resulted in the Snipping Tool not being able to correctly save screenshots.

If some system files related to the Snipping tool are damaged, they may not function properly.

Snipping Tool may conflict with some third-party applications.

Related: Snipping Tool locked, freezes, or crashes in Windows.

Update the detailed information about 10 Troubleshooting Tips If Your Internet Is Connected But Not Working on the Bellydancehcm.com website. We hope the article's content will meet your needs, and we will regularly update the information to provide you with the fastest and most accurate information. Have a great day!